if($self->speed_down < 0) { return 'speed_down must be positive'; }
if (not($self->ip_addr) or $self->ip_addr eq '0.0.0.0') {
- my $next_addr = $self->addr_block->next_free_addr;
- if ($next_addr) {
- $self->ip_addr($next_addr->addr);
- } else {
+ $self->ip_addr($self->addr_block->next_free_addr->addr);
+ if (not $self->ip_addr) {
return "No free addresses in addr_block (blocknum: ".$self->blocknum.")";
}
}
+++ /dev/null
-#!/usr/bin/perl -Tw
-#
-# fs_signup_server
-#
-
-use strict;
-use vars qw($pid);
-use IO::Handle;
-use Storable qw(nstore_fd fd_retrieve);
-use Tie::RefHash;
-use Net::SSH qw(sshopen2);
-use FS::UID qw(adminsuidsetup);
-use FS::Conf;
-use FS::Record qw( qsearch qsearchs );
-use FS::cust_main_county;
-use FS::cust_main;
-use FS::cust_bill;
-use FS::cust_pkg;
-use FS::Msgcat qw(gettext);
-
-use vars qw( $opt $Debug );
-
-$Debug = 2;
-
-my $user = shift or die &usage;
-&adminsuidsetup( $user );
-
-my $conf = new FS::Conf;
-
-if ($conf->exists('signup_server-quiet')) {
- $FS::cust_bill::quiet = 1;
- $FS::cust_pkg::quiet = 1;
-}
-
-#my @payby = qw(CARD PREPAY);
-my @payby = $conf->config('signup_server-payby');
-my $smtpmachine = $conf->config('smtpmachine');
-
-my $machine = shift or die &usage;
-
-my $agentnum = shift or die &usage;
-my $agent = qsearchs( 'agent', { 'agentnum' => $agentnum } ) or die &usage;
-my $pkgpart_href = $agent->pkgpart_hashref;
-
-my $refnum = shift or die &usage;
-
-#causing trouble for some folks
-#$SIG{CHLD} = sub { wait() };
-
-$SIG{HUP} = \&killssh;
-$SIG{INT} = \&killssh;
-$SIG{QUIT} = \&killssh;
-$SIG{TERM} = \&killssh;
-$SIG{PIPE} = \&killssh;
-sub killssh { kill 'TERM', $pid if $pid; exit; };
-
-my($fs_signupd)="/usr/local/sbin/fs_signupd";
-
-while (1) {
- my($reader,$writer)=(new IO::Handle, new IO::Handle);
- #seems to be broken - calling ->flush explicitly# $writer->autoflush(1);
- warn "[fs_signup_server] Connecting to $machine...\n" if $Debug;
- $pid = sshopen2($machine,$reader,$writer,$fs_signupd);
-
- my @pops = qsearch('svc_acct_pop',{} );
- my $init_data = {
-
- #'_protocol' => 'signup',
- #'_version' => '0.1',
- #'_packet' => 'init'
-
- 'cust_main_county' =>
- [ map { $_->hashref } qsearch('cust_main_county', {}) ],
-
- 'part_pkg' =>
- [
- #map { $_->hashref }
- map { { 'payby' => [ $_->payby ], %{$_->hashref} } }
- grep { $_->svcpart('svc_acct') && $pkgpart_href->{ $_->pkgpart } }
- qsearch( 'part_pkg', { 'disabled' => '' } )
- ],
-
- 'agentnum2part_pkg' =>
- {
- map {
- my $href = $_->pkgpart_hashref;
- $_->agentnum =>
- [
- map { { 'payby' => [ $_->payby ], %{$_->hashref} } }
- grep { $_->svcpart('svc_acct') && $href->{ $_->pkgpart } }
- qsearch( 'part_pkg', { 'disabled' => '' } )
- ];
- } qsearch('agent', {} )
- },
-
- 'svc_acct_pop' => [ map { $_->hashref } @pops ],
-
- 'security_phrase' => $conf->exists('security_phrase'),
-
- 'payby' => [ $conf->config('signup_server-payby') ],
-
- 'msgcat' => { map { $_=>gettext($_) } qw(
- passwords_dont_match invalid_card unknown_card_type not_a
- ) },
-
- 'statedefault' => $conf->config('statedefault') || 'CA',
-
- 'countrydefault' => $conf->config('countrydefault') || 'US',
-
- };
-
- warn "[fs_signup_server] Sending init data...\n" if $Debug;
- nstore_fd($init_data, $writer) or die "can't send init data: $!";
- $writer->flush;
-
- warn "[fs_signup_server] Entering main loop...\n" if $Debug;
- while (1) {
- warn "[fs_signup_server] Reading (waiting for) signup data...\n" if $Debug;
- my $signup_data = fd_retrieve($reader);
-
- if ( $Debug > 1 ) {
- warn join('',
- map { " $_ => ". $signup_data->{$_}. "\n" } keys %$signup_data );
- }
-
- warn "[fs_signup_server] Processing signup...\n" if $Debug;
-
- my $error = '';
-
- #things that aren't necessary in base class, but are for signup server
- #return "Passwords don't match"
- # if $hashref->{'_password'} ne $hashref->{'_password2'}
- $error ||= gettext('empty_password') unless $signup_data->{'_password'};
- $error ||= gettext('no_access_number_selected')
- unless $signup_data->{'popnum'} || !scalar(@pops);
-
- #shares some stuff with htdocs/edit/process/cust_main.cgi... take any
- # common that are still here and library them.
- my $cust_main = new FS::cust_main ( {
- #'custnum' => '',
- 'agentnum' => $signup_data->{agentnum} || $agentnum,
- 'refnum' => $refnum,
-
- map { $_ => $signup_data->{$_} } qw(
- last first ss company address1 address2 city county state zip country
- daytime night fax payby payinfo paydate payname referral_custnum comments
- ),
-
- } );
-
- $error ||= "Illegal payment type"
- unless grep { $_ eq $signup_data->{'payby'} } @payby;
-
- $cust_main->payinfo($cust_main->daytime)
- if $cust_main->payby eq 'LECB' && ! $cust_main->payinfo;
-
- my @invoicing_list = split( /\s*\,\s*/, $signup_data->{'invoicing_list'} );
-
- $signup_data->{'pkgpart'} =~ /^(\d+)$/ or '' =~ /^()$/;
- my $pkgpart = $1;
-
- my $part_pkg =
- qsearchs( 'part_pkg', { 'pkgpart' => $pkgpart } )
- or $error ||= "WARNING: unknown pkgpart: $pkgpart";
- my $svcpart = $part_pkg->svcpart('svc_acct') unless $error;
-
- my $cust_pkg = new FS::cust_pkg ( {
- #later#'custnum' => $custnum,
- 'pkgpart' => $signup_data->{'pkgpart'},
- } );
- $error ||= $cust_pkg->check;
-
- my $svc_acct = new FS::svc_acct ( {
- 'svcpart' => $svcpart,
- map { $_ => $signup_data->{$_} }
- qw( username _password sec_phrase popnum ),
- } );
-
- my $y = $svc_acct->setdefault; # arguably should be in new method
- $error ||= $y unless ref($y);
-
- $error ||= $svc_acct->check;
-
- use Tie::RefHash;
- tie my %hash, 'Tie::RefHash';
- %hash = ( $cust_pkg => [ $svc_acct ] );
- $error ||= $cust_main->insert( \%hash, \@invoicing_list ); #msgcat
-
- if ( ! $error && $conf->exists('signup_server-realtime') ) {
-
- warn "[fs_signup_server] Billing customer...\n" if $Debug;
-
- my $bill_error = $cust_main->bill;
- warn "[fs_signup_server] error billing new customer: $bill_error"
- if $bill_error;
-
- $cust_main->apply_payments;
- $cust_main->apply_credits;
-
- $bill_error = $cust_main->collect;
- warn "[fs_signup_server] error collecting from new customer: $bill_error"
- if $bill_error;
-
- if ( $cust_main->balance > 0 ) {
-
- #this makes sense. credit is "un-doing" the invoice
- $cust_main->credit( $cust_main->balance, 'signup server decline' );
- $cust_main->apply_credits;
-
- #should check list for errors...
- #$cust_main->suspend;
- $cust_main->cancel;
-
- $error = '_decline';
- }
- }
-
- warn "[fs_signup_server] Sending results...\n" if $Debug;
- print $writer $error, "\n";
-
- next if $error;
-
- if ( $conf->config('signup_server-email') ) {
- warn "[fs_signup_server] Sending email...\n" if $Debug;
-
- #false laziness w/FS::cust_bill::send & FS::cust_pay::delete
- use Mail::Header;
- use Mail::Internet 1.44;
- use Date::Format;
- my $from = $conf->config('invoice_from'); #??? as good as any
- $ENV{MAILADDRESS} = $from;
- my $header = new Mail::Header ( [
- "From: $from",
- "To: ". $conf->config('signup_server-email'),
- "Sender: $from",
- "Reply-To: $from",
- "Date: ". time2str("%a, %d %b %Y %X %z", time),
- "Subject: FREESIDE NOTIFICATION: Signup Server",
- ] );
- my $body = [
- "This is an automatic message from your Freeside installation\n",
- "informing you a customer has signed up via the signup server:\n",
- "\n",
- 'custnum : '. $cust_main->custnum. "\n",
- 'Name : '. $cust_main->last. ", ". $cust_main->first. "\n",
- 'Agent : '. $cust_main->agent->agent. "\n",
- 'Package : '. $part_pkg->pkg. ' - '. $part_pkg->comment. "\n",
- 'Signup Date : '. time2str('%C', time). "\n",
- 'Username : '. $svc_acct->username. "\n",
- #'Password : '. # config file to turn this on if noment insists
- 'Day phone : '. $cust_main->daytime. "\n",
- 'Night phone : '. $cust_main->night. "\n",
- 'Address : '. $cust_main->address1. "\n",
- ( $cust_main->address2
- ? ' '. $cust_main->address2. "\n"
- : '' ),
- ' '. $cust_main->city. ', '. $cust_main->state. ' '.
- $cust_main->zip. "\n",
- ( $cust_main->country eq 'US'
- ? ''
- : ' '. $cust_main->country. "\n" ),
- "\n",
- ];
- #if ( $cust_main->balance > 0 ) {
- # push @$body,
- # "This customer has an outstanding balance and has been suspended.\n";
- #}
- my $message = new Mail::Internet ( 'Header' => $header, 'Body' => $body );
- $!=0;
- $message->smtpsend( Host => $smtpmachine )
- or $message->smtpsend( Host => $smtpmachine, Debug => 1 )
- or warn "[fs_signup_server] can't send email to ".
- $conf->config('signup_server-email').
- " via server $smtpmachine with SMTP: $!";
- #end-of-send mail
- }
-
- }
- close $writer;
- close $reader;
- warn "connection to $machine lost! waiting 60 seconds...\n";
- sleep 60;
- warn "reconnecting...\n";
-}
-
-sub usage {
- die "Usage:\n\n fs_signup_server user machine agentnum refnum\n";
-}
-
<%=table()%>
<TH><TD>Field name</TD><TD>Description</TD></TH>
-<% foreach my $pvf (sort {$a->name cmp $b->name} @{ $pvfs{$dbtable} }) { %>
+<% foreach $pvf (sort {$a->name cmp $b->name} @{ $pvfs{$dbtable} }) { %>
<TR>
<TD></TD>
<TD>
<TD><% if ($action eq 'Add') { %>
<SELECT SIZE=1 NAME="dbtable"><%
my $dbdef = dbdef; # ick
- foreach my $dbtable (sort { $a cmp $b } $dbdef->tables) {
+ foreach my $dbtable ($dbdef->tables) {
if ($dbtable !~ /^h_/
and $dbdef->table($dbtable)->primary_key) { %>
<OPTION VALUE="<%=$dbtable%>"><%=$dbtable%></OPTION><%
+++ /dev/null
-# BEGIN LICENSE BLOCK
-#
-# Copyright (c) 1996-2003 Jesse Vincent <jesse@bestpractical.com>
-#
-# (Except where explictly superceded by other copyright notices)
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# Unless otherwise specified, all modifications, corrections or
-# extensions to this work which alter its source code become the
-# property of Best Practical Solutions, LLC when submitted for
-# inclusion in the work.
-#
-#
-# END LICENSE BLOCK
-RT is an enterprise-grade issue tracking system. It allows
-organizations to keep track of their to-do lists, who is working
-on which tasks, what's already been done, and when tasks were
-completed. It is available under the terms of version 2 of the GNU
-General Public License (GPL), so it doesn't cost anything to set
-up and use.
-
-
- Jesse Vincent
- Best Practical Solutions, LLC
- March 2003
-
-REQUIRED PACKAGES:
-------------------
-
-o Perl 5.8.0 or later (http://www.perl.com).
-
- (If you intend to use the FastCGI or SpeedyCGI support, you
- need to make sure that perl has been built with support for
- setgid perl scripts.)`
-
- Perl 5.6.1 is currently deprecated and will be officially desupported
- in a future release
-
-o A DB backend; MySQL is recommended ( http://www.mysql.com )
- Currently supported: Mysql 4.0.13 or later.
- Postgres 7.2 or later.
-
- Mysql 3.23.46 or newer with support for InnoDB
- is currently deprecated and will be officially
- desupported in a future release.
-
-o Apache version 1.3.x or 2.x (http://httpd.apache.org)
- with mod_perl -- (http://perl.apache.org )
- or a webserver with FastCGI support (www.fastcgi.com)
-
- mod_perl 2.0 isn't quite ready for prime_time just yet;
- Best Practical Solutions strongly recommends that sites use
- Apache 1.3 or FastCGI.
-
- Compiling mod_perl on Apache 1.3.x as a DSO has been known
- to have massive stability problems and is not recommended.
-
- mod_perl 1.x must be build with EVERYTHING=1
-
- RT's FastCGI handler runs setgid to the 'rt' group to
- protect RT's database password. You may need to install
- a special "suidperl" package or reconfigure your perl
- setup to support "setuid scripts" if you intend to use RT
- with FastCGI.
-
- Debian GNU/* 3.0+: the package which installs suidperl is
- called perl-suid, and should work without any tweaking.
-
- FreeBSD 4.2+: the package is called sperl, and should
- install a suidperl that just works
-
- Conectiva Linux 6.0+: suidperl is installed by default when
- perl is installed, but the program /bin/suidperl is not setuid.
- You must use chmod to make it setuid.
-
-
-
-o Various and sundry perl modules
- A tool included with RT takes care of the installation of
- most of these automatically during the install process.
-
- The tool supplied with RT uses Perl's CPAN system
- (http://www.cpan.org) to install modules. Some operating
- systems package all or some of the modules required and
- you may be better off installing the modules that way.
-
-
-GENERAL INSTALLATION
---------------------
-
-This is a rough guide to installing RT. For more detail, you'll want
-to read 'Chapter 2: Installing' in RT's manual, available at
-http://www.bestpractical.com/rt
-
-1 Unpack this distribution SOMWHERE OTHER THAN where you want to install RT
-
- Granted, you've already got it open. To do this cleanly:
-
- tar xzvf rt.tar.gz -C /tmp
-
-2 Run the "configure" script.
-
- ./configure --help to see the list of options
- ./configure (with the flags you want)
-
-3 Satisfy RT's myriad dependencies.
-
-3.1 Check for compliance:
-
- perl sbin/rt-test-dependencies \
- --with-<databasename> --with-<web-environment>
-
- databasename is one of: mysql, postgres
- web-environment is one of: fastcgi, modperl1, modperl2
-
-3.2 If there are unsatisfied dependencies, install them by hand or run:
-
- perl sbin/rt-test-dependencies \
- --with-<databasename> --with-<web-environment> --install
-
-
-3.3 Check to make sure everything was installed properly:
-
- perl sbin/rt-test-dependencies \
- --with-<databasename> --with-<web-environment>
-
-4 Create a group called 'rt'
-
-5a FOR A NEW INSTALLATION:
-
- As root, type:
- make install (replace "make" with the local name for
- Make, if you need to)
-
-
- make initialize-database
-
-
- If the make fails, type:
- make dropdb
- and start over from step 5a
-
-5b FOR UPGRADING: (Within the RT 3.0.x series)
-
- As root, type:
- make upgrade (replace "make" with the local name for
- Make, if you need to)
-
- This will build new binaries, config files and libraries without
- overwriting your RT database.
-
- It may then instruct you to update your RT system database objects
-
-6 Edit etc/RT_SiteConfig.pm in your RT installation directory, by specifying
- any values you need to change from the defaults in etc/RT_Config.pm
-
-7 Configure the email and web gateways, as described below.
-
-8 Stop and start your webserver, so it picks up your configuration changes.
-
- NOTE: root's password for the web interface is "password"
- (without the quotes.) Not changing this is a SECURITY risk
-
-9 Configure RT per the instructions in RT's manual.
-
- Until you do this, RT will not be able to send or receive email,
- nor will it be more than marginally functional. This is not an
- optional step.
-
-
-THE WEB INTERFACE
------------------
-
-RT's web interface is based around HTML::Mason, which works best with the mod_perl
-perl interpreter within Apache httpd. Alternatively, support for the FastCGI
-(and plain CGI) interface is also provided as 'bin/mason_handler.fcgi'.
-
-Apache
- You'll need to add a few lines to your httpd.conf telling it about RT:
-
-<VirtualHost your.ip.address>
- ServerName your.rt.server.hostname
- DocumentRoot /opt/rt3/share/html
- AddDefaultCharset UTF-8
-
- # this line applies to Apache2+mod_perl2 only
- PerlModule Apache2 Apache::compat
-
- PerlModule Apache::DBI
- PerlRequire /opt/rt3/bin/webmux.pl
-
- # this section applies to Apache 1 only
- <Location />
- SetHandler perl-script
- PerlHandler RT::Mason
- </Location>
-
- # this section applies to Apache2+mod_perl2 only
- <FilesMatch "\.html$">
- SetHandler perl-script
- PerlHandler RT::Mason
- </FilesMatch>
- <LocationMatch "/Attachment/">
- SetHandler perl-script
- PerlHandler RT::Mason
- </LocationMatch>
- <LocationMatch "/REST/">
- SetHandler perl-script
- PerlHandler RT::Mason
- </LocationMatch>
-</VirtualHost>
-
-
-
-SETTING UP THE MAIL GATEWAY
----------------------------
-
-An alias for the initial queue will need to be made in either your
-global mail aliases file (if you are using NIS) or locally on your
-machine.
-
-Add the following lines to /etc/aliases (or your local equivalent) :
-
-rt: "|/opt/rt3/bin/rt-mailgate --queue general --action correspond --url http://localhost/"
-rt-comment: "|/opt/rt3/bin/rt-mailgate --queue general --action comment --url http://localhost/"
- | | |
- <queue-name>----/ | |
- | |
- <correspond or comment depending on whether | |
- the mail should be resent to the requestor>---/ |
- |
- <URL for RT's web interface>---/
-
-
-BUGS
-----
-
-To report a bug, send email to rt-3.0-bugs@fsck.com.
-
-GETTING HELP
-------------
-
-If RT is mission-critical for you or if you use it heavily, we recommend that
-you purchase a commercial support contract. Details on support contracts
-are available at http://www.bestpractical.com.
-
-If you're interested in having RT extended or customized or would like more
-information about commercial support options, please send email to
-<sales@bestpractical.com> to discuss rates and availability.
-
-
-RT-USERS MAILINGLIST
---------------------
-
-To keep up to date on the latest RT tips, techniques and extensions,
-you probably want to join the rt-users mailing list. Send a message to:
-
- rt-users-request@lists.fsck.com
-
-With the body of the message consisting of only the word:
-
- subscribe
-
-If you're interested in hacking on RT, you'll want to subscribe to
-rt-devel@lists.fsck.com. Subscribe to it with instructions similar to
-those above.
-
-Address questions about the stable release to the rt-users list, and
-questions about the development version to the rt-devel list. If you feel
-your questions are best not asked publicly, send them personally to
-<jesse@bestpractical.com>.
-
-
-RT WEBSITE
-----------
-
-For current information about RT, check out the RT website at
- http://www.bestpractical.com/
-
-You'll find screenshots, a pointer to the current version of RT, contributed
-patches, and lots of other great stuff.
-
-
-TROUBLESHOOTING
----------------
-
-If the solution to the problem you're running into isn't obvious and you've
-checked the FAQ, feel free to send mail to rt-users@fsck.com (for released
-versions of RT) or rt-devel@fsck.com (for development versions).
-
-Thanks!
projects / freeside.git / commitdiff