+++ /dev/null
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2011 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-#
-# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
-# Have a look at "configure" and "Makefile.in" instead
-#
-
-
-PERL = /usr/bin/perl
-INSTALL = /usr/bin/install -c
-
-RT_LAYOUT = Freeside
-
-CONFIG_FILE_PATH = /opt/rt3/etc
-CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
-SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
-
-
-RT_VERSION_MAJOR = 3
-RT_VERSION_MINOR = 8
-RT_VERSION_PATCH = 13
-
-RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
-TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
-
-
-# This is the group that all of the installed files will be chgrp'ed to.
-RTGROUP = freeside
-
-
-# User which should own rt binaries.
-BIN_OWNER = root
-
-# User that should own all of RT's libraries, generally root.
-LIBS_OWNER = root
-
-# Group that should own all of RT's libraries, generally root.
-LIBS_GROUP = bin
-
-WEB_USER = freeside
-WEB_GROUP = freeside
-
-
-APACHECTL =
-
-# {{{ Files and directories
-
-# DESTDIR allows you to specify that RT be installed somewhere other than
-# where it will eventually reside. DESTDIR _must_ have a trailing slash
-# if it's defined.
-
-DESTDIR =
-
-
-
-RT_PATH = /opt/rt3
-RT_ETC_PATH = /opt/rt3/etc
-RT_BIN_PATH = /opt/rt3/bin
-RT_SBIN_PATH = /opt/rt3/sbin
-RT_LIB_PATH = /opt/rt3/lib
-RT_MAN_PATH = /opt/rt3/man
-RT_VAR_PATH = /opt/rt3/var
-RT_DOC_PATH = /opt/rt3/share/doc
-RT_FONT_PATH = /opt/rt3/share/fonts
-RT_LOCAL_PATH = /opt/rt3/local
-LOCAL_PLUGIN_PATH = /opt/rt3/local/plugins
-LOCAL_ETC_PATH = /opt/rt3/local/etc
-LOCAL_LIB_PATH = /opt/rt3/local/lib
-LOCAL_LEXICON_PATH = /opt/rt3/local/po
-MASON_HTML_PATH = /var/www/freeside/rt
-MASON_LOCAL_HTML_PATH = /opt/rt3/local/html
-MASON_DATA_PATH = /usr/local/etc/freeside/masondata
-MASON_SESSION_PATH = /opt/rt3/var/session_data
-RT_LOG_PATH = /opt/rt3/var/log
-
-# RT_READABLE_DIR_MODE is the mode of directories that are generally meant
-# to be accessable
-RT_READABLE_DIR_MODE = 0755
-
-
-
-
-# {{{ all these define the places that RT's binaries should get installed
-
-# RT_MODPERL_HANDLER is the mason handler script for mod_perl
-RT_MODPERL_HANDLER = webmux.pl
-# RT_STANDALONE_SERVER is a stand-alone HTTP server
-RT_STANDALONE_SERVER = standalone_httpd
-# RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
-RT_SPEEDYCGI_HANDLER = mason_handler.scgi
-# RT_FASTCGI_HANDLER is the mason handler script for FastCGI
-RT_FASTCGI_HANDLER = mason_handler.fcgi
-# RT_FASTCGI_SERVER is the FastCGI server
-RT_FASTCGI_SERVER = fastcgi_server
-# RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
-RT_WIN32_FASTCGI_HANDLER = mason_handler.svc
-# RT's CLI
-RT_CLI_BIN = rt
-# RT's mail gateway
-RT_MAILGATE_BIN = rt-mailgate
-# RT's cron tool
-RT_CRON_BIN = rt-crontool
-
-# }}}
-
-
-BINARIES = $(RT_MODPERL_HANDLER) \
- $(RT_MAILGATE_BIN) \
- $(RT_CLI_BIN) \
- $(RT_CRON_BIN) \
- $(RT_STANDALONE_SERVER) \
- $(RT_SPEEDYCGI_HANDLER) \
- $(RT_FASTCGI_HANDLER) \
- $(RT_FASTCGI_SERVER) \
- $(RT_WIN32_FASTCGI_HANDLER)
-
-
-
-
-
-SYSTEM_BINARIES = rt-attributes-viewer \
- rt-dump-database \
- rt-setup-database \
- rt-email-digest \
- rt-email-dashboards \
- rt-email-group-admin \
- rt-server \
- rt-session-viewer \
- rt-test-dependencies \
- rt-clean-sessions \
- rt-shredder \
- rt-validator
-
-
-ETC_FILES = acl.Informix \
- acl.Pg \
- acl.Oracle \
- acl.mysql \
- acl.Sybase \
- schema.Informix \
- schema.Pg \
- schema.Oracle \
- schema.mysql-4.0 \
- schema.mysql-4.1 \
- schema.Sybase \
- schema.SQLite \
- initialdata
-
-# }}}
-
-# {{{ Web frontend
-
-WEB_HANDLER = modperl2
-
-# }}}
-
-# {{{ Database setup
-
-#
-# DB_TYPE defines what sort of database RT trys to talk to
-# "mysql" is known to work.
-# "Pg" is known to work
-# "Informix" is known to work
-
-DB_TYPE = Pg
-
-# Set DBA to the name of a unix account with the proper permissions and
-# environment to run your commandline SQL sbin
-
-# Set DB_DBA to the name of a DB user with permission to create new databases
-
-# For mysql, you probably want 'root'
-# For Pg, you probably want 'postgres'
-# For Oracle, you want 'system'
-# For Informix, you want 'informix'
-
-DB_DBA = freeside
-
-DB_HOST = localhost
-
-# If you're not running your database server on its default port,
-# specifiy the port the database server is running on below.
-# It's generally safe to leave this blank
-
-DB_PORT =
-
-
-
-
-#
-# Set this to the canonical name of the interface RT will be talking to the
-# database on. If you said that the RT_DB_HOST above was "localhost," this
-# should be too. This value will be used to grant rt access to the database.
-# If you want to access the RT database from multiple hosts, you'll need
-# to grant those database rights by hand.
-#
-
-DB_RT_HOST = localhost
-
-# set this to the name you want to give to the RT database in
-# your database server. For Oracle, this should be the name of your sid
-
-DB_DATABASE = freeside
-DB_RT_USER = freeside
-DB_RT_PASS =
-
-# }}}
-
-
-TEST_FILES = t/*.t t/*/*.t
-TEST_VERBOSE = 0
-
-
-####################################################################
-
-all: default
-
-default:
- @echo "Please read RT's README before beginning your installation."
-
-
-
-instruct:
- @echo "Congratulations. RT is now installed."
- @echo ""
- @echo ""
- @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
- @echo ""
- @echo "(You will definitely need to set RT's database password in "
- @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
- @echo "very dangerous. Note that you do not have to manually add a "
- @echo "database user or set up a database for RT. These actions will be "
- @echo "taken care of in the next step.)"
- @echo ""
- @echo "After that, you need to initialize RT's database by running"
- @echo " 'make initialize-database'"
-
-
-upgrade-instruct:
- @echo "Congratulations. RT has been upgraded. You should now check over"
- @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
- @echo "you should update RT's system database objects by running "
- @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action upgrade"
-
-
-upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
-
-upgrade-noclobber: config-install dirs libs-install html-install bin-install local-install doc-install font-install fixperms
-
-
-# {{{ dependencies
-
-my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
-testdeps:
- $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
-
-depends: fixdeps
-
-fixdeps:
- $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
-
-#}}}
-
-# {{{ fixperms
-fixperms:
- # Make the libraries readable
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
-
-
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
-
- chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
- cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
-
- #TODO: the config file should probably be able to have its
- # owner set separately from the binaries.
- chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
- chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
-
- chmod 0440 $(DESTDIR)$(CONFIG_FILE)
- chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
- # Make this externally readable
- chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata
-
- # Make the system binaries
- cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
-
- # Make the system binaries executable also
- cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
-
- # Make the web ui readable by all.
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
- $(DESTDIR)$(LOCAL_LEXICON_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
-
- # Make the web ui's data dir writable
- chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
- chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
- chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
-# }}}
-
-# {{{ dirs
-dirs:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
-# }}}
-
-install: testdeps config-install dirs files-install fixperms instruct
-
-files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install font-install
-
-config-install:
- $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
- -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
- [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
- @echo "Installed configuration. About to install RT in $(RT_PATH)"
-
-test:
- $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
-
-parallel-test: test-parallel
-
-test-parallel:
- RT_TEST_PARALLEL=1 HARNESS_OPTIONS="j4" $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
-
-regression-install: config-install
- $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)$(CONFIG_FILE)
-
-# {{{ database-installation
-
-regression-reset-db: force-dropdb
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
-
-initdb :: initialize-database
-
-initialize-database:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
-
-dropdb:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password
-
-force-dropdb:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force
-
-# }}}
-
-# {{{ libs-install
-libs-install:
- [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
- -( cd lib && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
- done
- -( cd lib && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
- done
-# }}}
-
-# {{{ html-install
-html-install:
- [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
- -( cd share/html && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
- done
- -( cd share/html && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
- done
-# }}}
-
-# {{{ font-install
-font-install:
- [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
- -( cd share/fonts && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
- done
-# }}}
-
-# {{{ doc-install
-doc-install:
- # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
- -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
- [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
- -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
-# }}}
-
-# {{{ etc-install
-
-etc-install:
- [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
- for file in $(ETC_FILES) ; do \
- $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
- done
-# }}}
-
-# {{{ sbin-install
-
-sbin-install:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
- for file in $(SYSTEM_BINARIES) ; do \
- $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
- done
-
-# }}}
-
-# {{{ bin-install
-
-bin-install:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
- for file in $(BINARIES) ; do \
- $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
- done
-
-# {{{ local-install
-local-install:
- -( cd local/html && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
- done
- -( cd local/html && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
- done
- -( cd local/po && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
- done
- -( cd local/po && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
- done
- -( cd local/etc && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
- done
- -( cd local/etc && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
- done
-# }}}
-
-# {{{ Best Practical Build targets -- no user servicable parts inside
-
-regenerate-catalogs:
- $(PERL) sbin/extract-message-catalog
-
-license-tag:
- $(PERL) sbin/license_tag
-
-factory: initialize-database
- cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
-
-reconfigure:
- aclocal -I m4
- autoconf
- chmod 755 ./configure
- ./configure
-
-start-httpd:
- $(PERL) bin/standalone_httpd &
-
-start-server:
- $(PERL) sbin/rt-server &
-
-apachectl:
- $(APACHECTL) stop
- sleep 10
- $(APACHECTL) start
- sleep 5
-
-SNAPSHOT=$(shell git describe --tags)
-snapshot:
- git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
- ( cd $(SNAPSHOT) && autoconf && PERL=/usr/bin/perl ./configure )
- tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
- rm -fr "$(SNAPSHOT)/"
-
-# }}}
projects / freeside.git / commitdiff