+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use vars qw($Nobody $SystemUser $item);
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Term::ReadKey;
-use Getopt::Long;
-
-$| = 1; # unbuffer all output.
-
-my %args = (
- dba => 'freeside',
-);
-GetOptions(
- \%args,
- 'action=s',
- 'force', 'debug',
- 'dba=s', 'dba-password=s', 'prompt-for-dba-password',
- 'datafile=s', 'datadir=s', 'skip-create', 'root-password-file=s',
- 'help|h',
-);
-
-no warnings 'once';
-if ( $args{help} || ! $args{'action'} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
- exit;
-}
-
-require RT;
-RT->LoadConfig();
-RT->InitClasses();
-
-# Force warnings to be output to STDERR if we're not already logging
-# them at a higher level
-RT->Config->Set( LogToScreen => 'warning')
- unless ( RT->Config->Get( 'LogToScreen' )
- && RT->Config->Get( 'LogToScreen' ) =~ /^(debug|info|notice)$/ );
-
-# get customized root password
-my $root_password;
-if ( $args{'root-password-file'} ) {
- open( my $fh, '<', $args{'root-password-file'} )
- or die "Couldn't open 'args{'root-password-file'}' for reading: $!";
- $root_password = <$fh>;
- chomp $root_password;
- my $min_length = RT->Config->Get('MinimumPasswordLength');
- if ($min_length) {
- die
-"password needs to be at least $min_length long, please check file '$args{'root-password-file'}'"
- if length $root_password < $min_length;
- }
- close $fh;
-}
-
-
-# check and setup @actions
-my @actions = grep $_, split /,/, $args{'action'};
-if ( @actions > 1 && $args{'datafile'} ) {
- print STDERR "You can not use --datafile option with multiple actions.\n";
- exit(-1);
-}
-foreach ( @actions ) {
- unless ( /^(?:init|create|drop|schema|acl|coredata|insert|upgrade)$/ ) {
- print STDERR "$0 called with an invalid --action parameter.\n";
- exit(-1);
- }
- if ( /^(?:init|drop|upgrade)$/ && @actions > 1 ) {
- print STDERR "You can not mix init, drop or upgrade action with any action.\n";
- exit(-1);
- }
-}
-
-# convert init to multiple actions
-my $init = 0;
-if ( $actions[0] eq 'init' ) {
- if ($args{'skip-create'}) {
- @actions = qw(schema coredata insert);
- } else {
- @actions = qw(create schema acl coredata insert);
- }
- $init = 1;
-}
-
-# set options from environment
-foreach my $key(qw(Type Host Name User Password)) {
- next unless exists $ENV{ 'RT_DB_'. uc $key };
- print "Using Database$key from RT_DB_". uc($key) ." environment variable.\n";
- RT->Config->Set( "Database$key", $ENV{ 'RT_DB_'. uc $key });
-}
-
-my $db_type = RT->Config->Get('DatabaseType') || '';
-my $db_host = RT->Config->Get('DatabaseHost') || '';
-my $db_name = RT->Config->Get('DatabaseName') || '';
-my $db_user = RT->Config->Get('DatabaseUser') || '';
-my $db_pass = RT->Config->Get('DatabasePassword') || '';
-
-# load it here to get error immidiatly if DB type is not supported
-require RT::Handle;
-
-if ( $db_type eq 'SQLite' && !File::Spec->file_name_is_absolute($db_name) ) {
- $db_name = File::Spec->catfile($RT::VarPath, $db_name);
- RT->Config->Set( DatabaseName => $db_name );
-}
-
-my $dba_user = $args{'dba'} || $ENV{'RT_DBA_USER'} || $db_user || '';
-my $dba_pass = exists($args{'dba-password'})
- ? $args{'dba-password'}
- : $ENV{'RT_DBA_PASSWORD'};
-
-if ($args{'skip-create'}) {
- $dba_user = $db_user;
- $dba_pass = $db_pass;
-} else {
- if ( !$args{force} && ( !defined $dba_pass || $args{'prompt-for-dba-password'} ) ) {
- $dba_pass = get_dba_password();
- chomp $dba_pass if defined($dba_pass);
- }
-}
-
-print "Working with:\n"
- ."Type:\t$db_type\nHost:\t$db_host\nName:\t$db_name\n"
- ."User:\t$db_user\nDBA:\t$dba_user" . ($args{'skip-create'} ? ' (No DBA)' : '') . "\n";
-
-foreach my $action ( @actions ) {
- no strict 'refs';
- my ($status, $msg) = *{ 'action_'. $action }{'CODE'}->( %args );
- error($action, $msg) unless $status;
- print $msg .".\n" if $msg;
- print "Done.\n";
-}
-
-sub action_create {
- my %args = @_;
- my $dbh = get_system_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now creating a $db_type database $db_name for RT.\n";
- return RT::Handle->CreateDatabase( $dbh );
-}
-
-sub action_drop {
- my %args = @_;
-
- print "Dropping $db_type database $db_name.\n";
- unless ( $args{'force'} ) {
- print <<END;
-
-About to drop $db_type database $db_name on $db_host.
-WARNING: This will erase all data in $db_name.
-
-END
- exit(-2) unless _yesno();
- }
-
- my $dbh = get_system_dbh();
- return RT::Handle->DropDatabase( $dbh );
-}
-
-sub action_schema {
- my %args = @_;
- my $dbh = get_admin_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now populating database schema.\n";
- return RT::Handle->InsertSchema( $dbh, $args{'datafile'} || $args{'datadir'} );
-}
-
-sub action_acl {
- my %args = @_;
- my $dbh = get_admin_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting database ACLs.\n";
- return RT::Handle->InsertACL( $dbh, $args{'datafile'} || $args{'datadir'} );
-}
-
-sub action_coredata {
- my %args = @_;
- $RT::Handle = RT::Handle->new;
- $RT::Handle->dbh( undef );
- RT::ConnectToDatabase();
- RT::InitLogging();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting RT core system objects.\n";
- return $RT::Handle->InsertInitialData;
-}
-
-sub action_insert {
- my %args = @_;
- $RT::Handle = RT::Handle->new;
- RT::Init();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting data.\n";
- my $file = $args{'datafile'};
- $file = $RT::EtcPath . "/initialdata" if $init && !$file;
- $file ||= $args{'datadir'}."/content";
-
- # Slurp in backcompat
- my %removed;
- my @back = @{$args{backcompat} || []};
- if (@back) {
- my @lines = do {local @ARGV = @back; <>};
- for (@lines) {
- s/\#.*//;
- next unless /\S/;
- my ($class, @fields) = split;
- $class->_BuildTableAttributes;
- $RT::Logger->debug("Temporarily removing @fields from $class");
- $removed{$class}{$_} = delete $RT::Record::_TABLE_ATTR->{$class}{$_}
- for @fields;
- }
- }
-
- my @ret = $RT::Handle->InsertData( $file, $root_password );
-
- # Put back the fields we chopped off
- for my $class (keys %removed) {
- $RT::Record::_TABLE_ATTR->{$class}{$_} = $removed{$class}{$_}
- for keys %{$removed{$class}};
- }
- return @ret;
-}
-
-sub action_upgrade {
- my %args = @_;
- my $base_dir = $args{'datadir'} || "./etc/upgrade";
- return (0, "Couldn't read dir '$base_dir' with upgrade data")
- unless -d $base_dir || -r _;
-
- my $upgrading_from = undef;
- do {
- if ( defined $upgrading_from ) {
- print "Doesn't match #.#.#: ";
- } else {
- print "Enter RT version you're upgrading from: ";
- }
- $upgrading_from = scalar <STDIN>;
- chomp $upgrading_from;
- $upgrading_from =~ s/\s+//g;
- } while $upgrading_from !~ /^\d+\.\d+\.\w+$/;
-
- my $upgrading_to = $RT::VERSION;
- return (0, "The current version $upgrading_to is lower than $upgrading_from")
- if RT::Handle::cmp_version( $upgrading_from, $upgrading_to ) > 0;
-
- return (1, "The version $upgrading_to you're upgrading to is up to date")
- if RT::Handle::cmp_version( $upgrading_from, $upgrading_to ) == 0;
-
- my @versions = get_versions_from_to($base_dir, $upgrading_from, undef);
- return (1, "No DB changes since $upgrading_from")
- unless @versions;
-
- if (RT::Handle::cmp_version($versions[-1], $upgrading_to) > 0) {
- print "\n***** There are upgrades for $versions[-1], which is later than $upgrading_to,\n";
- print "***** which you are nominally upgrading to. Upgrading to $versions[-1] instead.\n";
- $upgrading_to = $versions[-1];
- }
-
- print "\nGoing to apply following upgrades:\n";
- print map "* $_\n", @versions;
-
- {
- my $custom_upgrading_to = undef;
- do {
- if ( defined $custom_upgrading_to ) {
- print "Doesn't match #.#.#: ";
- } else {
- print "\nEnter RT version if you want to stop upgrade at some point,\n";
- print " or leave it blank if you want apply above upgrades: ";
- }
- $custom_upgrading_to = scalar <STDIN>;
- chomp $custom_upgrading_to;
- $custom_upgrading_to =~ s/\s+//g;
- last unless $custom_upgrading_to;
- } while $custom_upgrading_to !~ /^\d+\.\d+\.\w+$/;
-
- if ( $custom_upgrading_to ) {
- return (
- 0, "The version you entered ($custom_upgrading_to) is lower than\n"
- ."version you're upgrading from ($upgrading_from)"
- ) if RT::Handle::cmp_version( $upgrading_from, $custom_upgrading_to ) > 0;
-
- return (1, "The version you're upgrading to is up to date")
- if RT::Handle::cmp_version( $upgrading_from, $custom_upgrading_to ) == 0;
-
- if ( RT::Handle::cmp_version( $RT::VERSION, $custom_upgrading_to ) < 0 ) {
- print "Version you entered is greater than installed ($RT::VERSION).\n";
- _yesno() or exit(-2);
- }
- # ok, checked everything no let's refresh list
- $upgrading_to = $custom_upgrading_to;
- @versions = get_versions_from_to($base_dir, $upgrading_from, $upgrading_to);
-
- return (1, "No DB changes between $upgrading_from and $upgrading_to")
- unless @versions;
-
- print "\nGoing to apply following upgrades:\n";
- print map "* $_\n", @versions;
- }
- }
-
- print "\nIT'S VERY IMPORTANT TO BACK UP BEFORE THIS STEP\n\n";
- _yesno() or exit(-2) unless $args{'force'};
-
- my ( $ret, $msg );
- foreach my $n ( 0..$#versions ) {
- my $v = $versions[$n];
- my @back = grep {-e $_} map {"$base_dir/$versions[$_]/backcompat"} $n+1..$#versions;
- print "Processing $v\n";
- my %tmp = (%args, datadir => "$base_dir/$v", datafile => undef, backcompat => \@back);
- if ( -e "$base_dir/$v/schema.$db_type" ) {
- ( $ret, $msg ) = action_schema( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- if ( -e "$base_dir/$v/acl.$db_type" ) {
- ( $ret, $msg ) = action_acl( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- if ( -e "$base_dir/$v/content" ) {
- ( $ret, $msg ) = action_insert( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- }
- return 1;
-}
-
-sub get_versions_from_to {
- my ($base_dir, $from, $to) = @_;
-
- opendir( my $dh, $base_dir ) or die "couldn't open dir: $!";
- my @versions = grep -d "$base_dir/$_" && /\d+\.\d+\.\d+/, readdir $dh;
- closedir $dh;
-
- return
- grep defined $to ? RT::Handle::cmp_version($_, $to) <= 0 : 1,
- grep RT::Handle::cmp_version($_, $from) > 0,
- sort RT::Handle::cmp_version @versions;
-}
-
-sub error {
- my ($action, $msg) = @_;
- print STDERR "Couldn't finish '$action' step.\n\n";
- print STDERR "ERROR: $msg\n\n";
- exit(-1);
-}
-
-sub get_dba_password {
- print "In order to create or update your RT database,"
- . " this script needs to connect to your "
- . " $db_type instance on $db_host as $dba_user\n";
- print "Please specify that user's database password below. If the user has no database\n";
- print "password, just press return.\n\n";
- print "Password: ";
- ReadMode('noecho');
- my $password = ReadLine(0);
- ReadMode('normal');
- print "\n";
- return ($password);
-}
-
-# get_system_dbh
-# Returns L<DBI> database handle connected to B<system> with DBA credentials.
-# See also L<RT::Handle/SystemDSN>.
-
-
-sub get_system_dbh {
- return _get_dbh( RT::Handle->SystemDSN, $dba_user, $dba_pass );
-}
-
-sub get_admin_dbh {
- return _get_dbh( RT::Handle->DSN, $dba_user, $dba_pass );
-}
-
-# get_rt_dbh [USER, PASSWORD]
-
-# Returns L<DBI> database handle connected to RT database,
-# you may specify credentials(USER and PASSWORD) to connect
-# with. By default connects with credentials from RT config.
-
-sub get_rt_dbh {
- return _get_dbh( RT::Handle->DSN, $db_user, $db_pass );
-}
-
-sub _get_dbh {
- my ($dsn, $user, $pass) = @_;
- my $dbh = DBI->connect(
- $dsn, $user, $pass,
- { RaiseError => 0, PrintError => 0 },
- );
- unless ( $dbh ) {
- my $msg = "Failed to connect to $dsn as user '$user': ". $DBI::errstr;
- if ( $args{'debug'} ) {
- require Carp; Carp::confess( $msg );
- } else {
- print STDERR $msg; exit -1;
- }
- }
- return $dbh;
-}
-
-sub _yesno {
- print "Proceed [y/N]:";
- my $x = scalar(<STDIN>);
- $x =~ /^y/i;
-}
-
-1;
-
-__END__
-
-=head1 NAME
-
-rt-setup-database - Set up RT's database
-
-=head1 SYNOPSIS
-
- rt-setup-database --action ...
-
-=head1 OPTIONS
-
-=over
-
-=item action
-
-Several actions can be combined using comma separated list.
-
-=over
-
-=item init
-
-Initialize the database. This is combination of multiple actions listed below.
-Create DB, schema, setup acl, insert core data and initial data.
-
-=item upgrade
-
-Apply all needed schema/acl/content updates (will ask for version to upgrade
-from)
-
-=item create
-
-Create the database.
-
-=item drop
-
-Drop the database. This will B<ERASE ALL YOUR DATA>.
-
-=item schema
-
-Initialize only the database schema
-
-To use a local or supplementary datafile, specify it using the '--datadir'
-option below.
-
-=item acl
-
-Initialize only the database ACLs
-
-To use a local or supplementary datafile, specify it using the '--datadir'
-option below.
-
-=item coredata
-
-Insert data into RT's database. This data is required for normal functioning of
-any RT instance.
-
-=item insert
-
-Insert data into RT's database. By default, will use RT's installation data.
-To use a local or supplementary datafile, specify it using the '--datafile'
-option below.
-
-=back
-
-=item datafile
-
-file path of the data you want to action on
-
-e.g. C<--datafile /path/to/datafile>
-
-=item datadir
-
-Used to specify a path to find the local database schema and acls to be
-installed.
-
-e.g. C<--datadir /path/to/>
-
-=item dba
-
-dba's username
-
-=item dba-password
-
-dba's password
-
-=item prompt-for-dba-password
-
-Ask for the database administrator's password interactively
-
-=item skip-create
-
-for 'init': skip creating the database and the user account, so we don't need
-administrator privileges
-
-=item root-password-file
-
-for 'init' and 'insert': rather than using the default administrative password
-for RT's "root" user, use the password in this file.
-
-=back
projects / freeside.git / blobdiff