+++ /dev/null
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-#
-# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
-# Have a look at "configure" and "Makefile.in" instead
-#
-
-
-PERL = /usr/bin/perl
-INSTALL = /usr/bin/install -c
-CC = gcc
-
-RT_LAYOUT = Freeside
-
-CONFIG_FILE_PATH = /opt/rt3/etc
-CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
-SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
-
-
-RT_VERSION_MAJOR = 4
-RT_VERSION_MINOR = 0
-RT_VERSION_PATCH = 5
-
-RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
-TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
-
-
-# This is the group that all of the installed files will be chgrp'ed to.
-RTGROUP = freeside
-
-
-# User which should own rt binaries.
-BIN_OWNER = root
-
-# User that should own all of RT's libraries, generally root.
-LIBS_OWNER = root
-
-# Group that should own all of RT's libraries, generally root.
-LIBS_GROUP = bin
-
-WEB_USER = freeside
-WEB_GROUP = freeside
-
-
-APACHECTL = /usr/sbin/apachectl
-
-
-# DESTDIR allows you to specify that RT be installed somewhere other than
-# where it will eventually reside. DESTDIR _must_ have a trailing slash
-# if it's defined.
-
-DESTDIR =
-
-
-
-RT_PATH = /opt/rt3
-RT_ETC_PATH = /opt/rt3/etc
-RT_BIN_PATH = /opt/rt3/bin
-RT_SBIN_PATH = /opt/rt3/sbin
-RT_LIB_PATH = /opt/rt3/lib
-RT_MAN_PATH = /opt/rt3/man
-RT_VAR_PATH = /opt/rt3/var
-RT_DOC_PATH = /opt/rt3/docs
-RT_FONT_PATH = /opt/rt3/share/fonts
-RT_LEXICON_PATH = /opt/rt3/share/po
-RT_LOCAL_PATH = /opt/rt3/local
-LOCAL_PLUGIN_PATH = /opt/rt3/local/plugins
-LOCAL_ETC_PATH = /opt/rt3/local/etc
-LOCAL_LIB_PATH = /opt/rt3/local/lib
-LOCAL_LEXICON_PATH = /opt/rt3/local/po
-MASON_HTML_PATH = /var/www/freeside/rt
-MASON_LOCAL_HTML_PATH = /opt/rt3/local/html
-MASON_DATA_PATH = /usr/local/etc/freeside/masondata
-MASON_SESSION_PATH = /opt/rt3/var/session_data
-RT_LOG_PATH = /opt/rt3/var/log
-
-# RT_READABLE_DIR_MODE is the mode of directories that are generally meant
-# to be accessable
-RT_READABLE_DIR_MODE = 0755
-
-
-
-
-
-# RT's CLI
-RT_CLI_BIN = rt
-# RT's mail gateway
-RT_MAILGATE_BIN = rt-mailgate
-# RT's cron tool
-RT_CRON_BIN = rt-crontool
-
-
-
-BINARIES = $(RT_MAILGATE_BIN) \
- $(RT_CLI_BIN) \
- $(RT_CRON_BIN)
-
-SYSTEM_BINARIES = rt-attributes-viewer \
- rt-clean-sessions \
- rt-dump-metadata \
- rt-email-dashboards \
- rt-email-digest \
- rt-email-group-admin \
- rt-fulltext-indexer \
- rt-preferences-viewer \
- rt-server \
- rt-session-viewer \
- rt-server.fcgi \
- rt-session-viewer \
- rt-setup-database \
- rt-setup-fulltext-index \
- rt-shredder \
- rt-test-dependencies \
- rt-validator \
- standalone_httpd
-
-
-ETC_FILES = acl.Pg \
- acl.Oracle \
- acl.mysql \
- schema.Pg \
- schema.Oracle \
- schema.mysql \
- schema.SQLite \
- initialdata
-
-
-
-WEB_HANDLER = modperl2
-
-
-
-#
-# DB_TYPE defines what sort of database RT trys to talk to
-# "mysql", "Oracle", "Pg", and "SQLite" are known to work.
-
-DB_TYPE = Pg
-
-# Set DBA to the name of a unix account with the proper permissions and
-# environment to run your commandline SQL sbin
-
-# Set DB_DBA to the name of a DB user with permission to create new databases
-
-# For mysql, you probably want 'root'
-# For Pg, you probably want 'postgres'
-# For Oracle, you want 'system'
-
-DB_DBA = freeside
-
-DB_HOST = localhost
-
-# If you're not running your database server on its default port,
-# specifiy the port the database server is running on below.
-# It's generally safe to leave this blank
-
-DB_PORT =
-
-
-
-
-#
-# Set this to the canonical name of the interface RT will be talking to the
-# database on. If you said that the RT_DB_HOST above was "localhost," this
-# should be too. This value will be used to grant rt access to the database.
-# If you want to access the RT database from multiple hosts, you'll need
-# to grant those database rights by hand.
-#
-
-DB_RT_HOST = localhost
-
-# set this to the name you want to give to the RT database in
-# your database server. For Oracle, this should be the name of your sid
-
-DB_DATABASE = freeside
-DB_RT_USER = freeside
-DB_RT_PASS =
-
-
-
-TEST_FILES = t/*.t t/*/*.t
-TEST_VERBOSE = 0
-
-
-####################################################################
-
-all: default
-
-default:
- @echo "Please read RT's README before beginning your installation."
-
-
-
-instruct:
- @echo "Congratulations. RT is now installed."
- @echo ""
- @echo ""
- @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
- @echo ""
- @echo "(You will definitely need to set RT's database password in "
- @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
- @echo "very dangerous. Note that you do not have to manually add a "
- @echo "database user or set up a database for RT. These actions will be "
- @echo "taken care of in the next step.)"
- @echo ""
- @echo "After that, you need to initialize RT's database by running"
- @echo " 'make initialize-database'"
-
-
-upgrade-instruct:
- @echo "Congratulations. RT has been upgraded. You should now check over"
- @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
- @echo "you should update RT's system database objects by running "
- @echo " make upgrade-database"
-
-
-upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
-
-my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
-testdeps:
- $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
-
-depends: fixdeps
-
-fixdeps:
- $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
-
-#}}}
-
-fixperms:
- # Make the libraries readable
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
-
-
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
-
- chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
- cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
-
- #TODO: the config file should probably be able to have its
- # owner set separately from the binaries.
- chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
- chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
-
- chmod 0440 $(DESTDIR)$(CONFIG_FILE)
- chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
- # Make this externally readable
- chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata
-
- # Make the system binaries
- cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
-
- # Make the system binaries executable also
- cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
-
-
- # Make the web ui readable by all.
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
- $(DESTDIR)$(RT_LEXICON_PATH) \
- $(DESTDIR)$(LOCAL_LEXICON_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
- $(DESTDIR)$(RT_LEXICON_PATH) \
- $(DESTDIR)$(LOCAL_LEXICON_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
- $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
- $(DESTDIR)$(RT_LEXICON_PATH) \
- $(DESTDIR)$(LOCAL_LEXICON_PATH)
-
- # Make the web ui's data dir writable
- chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
- chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
- chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
- $(DESTDIR)$(MASON_SESSION_PATH)
-
-dirs:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
- $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
- $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
-
-install: testdeps config-install dirs files-install fixperms instruct
-
-files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install font-install po-install
-
-config-install:
- $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
- -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
- [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
- @echo "Installed configuration. About to install RT in $(RT_PATH)"
-
-test:
- $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
-
-parallel-test: test-parallel
-
-test-parallel:
- RT_TEST_PARALLEL=1 $(PERL) "-MApp::Prove" -e 'my $$p = App::Prove->new(); $$p->process_args("-wlrj5","--state=slow,save", "t"); $$p->run()'
-
-regression-reset-db: force-dropdb
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba-password ''
-
-initdb :: initialize-database
-
-initialize-database:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --prompt-for-dba-password
-
-upgrade-database:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action upgrade --prompt-for-dba-password
-
-dropdb:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --prompt-for-dba-password
-
-force-dropdb:
- $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba-password '' --force
-
-critic:
- perlcritic --quiet sbin bin lib
-
-libs-install:
- [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
- -( cd lib && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
- done
- -( cd lib && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
- done
-
-html-install:
- [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
- -( cd share/html && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
- done
- -( cd share/html && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
- done
-
-font-install:
- [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
- -( cd share/fonts && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
- done
-
-
-po-install:
- [ -d $(DESTDIR)$(RT_LEXICON_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
- -( cd share/po && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "share/po/$$file" "$(DESTDIR)$(RT_LEXICON_PATH)/$$file" ; \
- done
-
-
-
-doc-install:
- # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
- -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
- [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
- -( cd docs && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_DOC_PATH)/$$dir" ; \
- done
- -( cd docs && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "docs/$$file" "$(DESTDIR)$(RT_DOC_PATH)/$$file" ; \
- done
- -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
-
-
-etc-install:
- [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
- for file in $(ETC_FILES) ; do \
- $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
- done
-
-
-sbin-install:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
- for file in $(SYSTEM_BINARIES) ; do \
- $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
- done
-
-
-
-bin-install:
- $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
- for file in $(BINARIES) ; do \
- $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
- done
-
-local-install:
- -( cd local/html && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
- done
- -( cd local/html && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
- done
- -( cd local/po && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
- done
- -( cd local/po && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
- done
- -( cd local/etc && find . -type d -print ) | while read dir ; do \
- $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
- done
- -( cd local/etc && find . -type f -print ) | while read file ; do \
- $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
- done
-
-
-regenerate-catalogs:
- $(PERL) devel/tools/extract-message-catalog
-
-license-tag:
- $(PERL) devel/tools/license_tag
-
-factory: initialize-database
- cd lib; $(PERL) ../devel/tools/factory $(DB_DATABASE) RT
-
-start-httpd:
- $(PERL) sbin/standalone_httpd &
-
-start-server:
- $(PERL) sbin/rt-server &
-
-apachectl:
- $(APACHECTL) stop
- sleep 10
- $(APACHECTL) start
- sleep 5
-
-SNAPSHOT=$(shell git describe --tags)
-THIRD_PARTY=devel/third-party/
-snapshot: build-snapshot build-third-party clearsign-snapshot clearsign-third-party snapshot-shasums
-
-build-snapshot:
- git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
- ( cd $(SNAPSHOT) && \
- echo "$(SNAPSHOT)" > .tag && \
- autoconf && \
- INSTALL=./install-sh PERL=/usr/bin/perl ./configure \
- --with-db-type=SQLite \
- --enable-layout=relative \
- --with-web-handler=standalone && \
- rm -rf autom4te.cache \
- config.status config.log config.pld \
- )
- tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
- rm -fr "$(SNAPSHOT)/"
-
-clearsign-snapshot:
- gpg --no-armor --detach-sign "$(SNAPSHOT).tar.gz"
-
-build-third-party:
- git archive --prefix "$(SNAPSHOT)/$(THIRD_PARTY)" HEAD:$(THIRD_PARTY) \
- | gzip > "$(SNAPSHOT)-third-party-source.tar.gz"
- rm -rf "$(SNAPSHOT)/$(THIRD_PARTY)"
-
-clearsign-third-party:
- gpg --no-armor --detach-sign "$(SNAPSHOT)-third-party-source.tar.gz"
-
-snapshot-shasums:
- sha1sum $(SNAPSHOT)*.tar.gz*
-
-vessel-import: build-snapshot
- [ -d $(VESSEL) ] || (echo "VESSEL isn't a path to your shipwright vessel" && exit -1)
- cp $(VESSEL)/scripts/RT/build.pl /tmp/build.pl
- ./sbin/rt-test-dependencies --with-standalone --with-fastcgi --with-sqlite --list > /tmp/rt.yml
- shipwright import file:$(SNAPSHOT).tar.gz \
- --require-yml /tmp/rt.yml \
- --build-script /tmp/build.pl \
- --name RT \
- --repository fs:$(VESSEL) \
- --log-level=info \
- --skip cpan-capitalization,cpan-mod_perl,cpan-Encode,cpan-PPI,cpan-Test-Exception-LessClever,cpan-Test-Manifest,cpan-Test-Object,cpan-Test-Pod,cpan-Test-Requires,cpan-Test-SubCalls,cpan-Test-cpan-Tester,cpan-Test-Warn --skip-all-recommends
- mv $(VESSEL)/scripts/RT/build $(VESSEL)/scripts/RT/build.pl
-
-JSMIN_URL = http://download.bestpractical.com/mirror/jsmin-2011-01-22.c
-JSMIN_SHA = 8a6b3b980a52c028eb73aee4a82ebe060c1ee854
-
-jsmin: jsmin-checkcc jsmin-fetch jsmin-verify jsmin-confirm jsmin-build jsmin-install
- @echo ""
- @echo "To configure RT to use jsmin, add the following line to $(DESTDIR)$(RT_ETC_PATH)/RT_SiteConfig.pm:"
- @echo ""
- @echo " Set(\$$JSMinPath, '$(DESTDIR)$(RT_BIN_PATH)/jsmin');"
- @echo ""
-
-jsmin-checkcc:
- @[ -n "$(CC)" ] || (echo "You don't appear to have a C compiler, please set CC and re-run configure" && exit 1)
-
-jsmin-confirm:
- @echo "jsmin is distributed under a slightly unusual license and can't be shipped"
- @echo "with RT. Before configuring RT to use jsmin, please read jsmin's license"
- @echo "below:"
- @echo ""
- @$(PERL) -pe 'print && exit if /^\*\// or /^#include/' jsmin.c
- @echo ""
- @echo "Press Enter to accept the license, or Ctrl-C to stop now."
- @$(PERL) -e '<STDIN>'
-
-jsmin-fetch:
- @echo ""
- @echo "Downloading jsmin.c from $(JSMIN_URL)"
- @echo ""
- @$(PERL) -MLWP::Simple -e 'exit not is_success(getstore("$(JSMIN_URL)", "jsmin.c"))' \
- || (echo "Failed to download $(JSMIN_URL)" && exit 1)
-
-jsmin-verify:
- @$(PERL) -MDigest::SHA -e \
- 'exit not Digest::SHA->new(1)->addfile("jsmin.c")->hexdigest eq "$(JSMIN_SHA)"' \
- || (echo "Verification of jsmin.c failed! Possible man in the middle?" && exit 1)
-
-jsmin-build:
- $(CC) -o jsmin jsmin.c
-
-jsmin-install:
- $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "jsmin" "$(DESTDIR)$(RT_BIN_PATH)/"
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use Carp;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use RT;
-
-use Getopt::Long;
-
-use RT::Interface::CLI qw(CleanEnv GetCurrentUser GetMessageContent loc);
-
-#Clean out all the nasties from the environment
-CleanEnv();
-
-my ( $search, $condition, $action, $search_arg, $condition_arg, $action_arg,
- $template, $template_id, $transaction, $transaction_type, $help, $log, $verbose );
-GetOptions(
- "search=s" => \$search,
- "search-arg=s" => \$search_arg,
- "condition=s" => \$condition,
- "condition-arg=s" => \$condition_arg,
- "action-arg=s" => \$action_arg,
- "action=s" => \$action,
- "template=s" => \$template,
- "template-id=s" => \$template_id,
- "transaction=s" => \$transaction,
- "transaction-type=s" => \$transaction_type,
- "log=s" => \$log,
- "verbose|v" => \$verbose,
- "help" => \$help,
-);
-
-# Load the config file
-RT::LoadConfig();
-
-# adjust logging to the screen according to options
-RT->Config->Set( LogToScreen => $log ) if $log;
-
-#Connect to the database and get RT::SystemUser and RT::Nobody loaded
-RT::Init();
-
-require RT::Tickets;
-require RT::Template;
-
-#Get the current user all loaded
-my $CurrentUser = GetCurrentUser();
-
-# show help even if there is no current user
-help() if $help;
-
-unless ( $CurrentUser->Id ) {
- print loc("No RT user found. Please consult your RT administrator.");
- exit(1);
-}
-
-help() unless $search && $action;
-
-$transaction = lc( $transaction||'' );
-if ( $transaction && $transaction !~ /^(first|all|last)$/i ) {
- print STDERR loc("--transaction argument could be only 'first', 'last' or 'all'");
- exit 1;
-}
-
-if ( $template && $template_id ) {
- print STDERR loc("--template-id is deprecated argument and can not be used with --template");
- exit 1;
-}
-elsif ( $template_id ) {
-# don't warn
- $template = $template_id;
-}
-
-# We _must_ have a search object
-load_module($search);
-load_module($action) if ($action);
-load_module($condition) if ($condition);
-
-my $void_scrip = RT::Scrip->new( $CurrentUser );
-my $void_scrip_action = RT::ScripAction->new( $CurrentUser );
-
-#At the appointed time:
-
-#find a bunch of tickets
-my $tickets = RT::Tickets->new($CurrentUser);
-my $search = $search->new(
- TicketsObj => $tickets,
- Argument => $search_arg,
- CurrentUser => $CurrentUser
-);
-
-$search->Prepare();
-
-# TicketsFound is an RT::Tickets object
-my $tickets = $search->TicketsObj;
-
-#for each ticket we've found
-while ( my $ticket = $tickets->Next() ) {
- print $ticket->Id() . ":\n" if ($verbose);
-
- my $template_obj = get_template( $ticket );
-
- if ( $transaction ) {
- my $txns = get_transactions($ticket);
- my $found = 0;
- while ( my $txn = $txns->Next ) {
- print "\t".loc("Using transaction #[_1]...", $txn->id)."\n"
- if $verbose;
- process($ticket, $txn, $template_obj);
- $found = 1;
- }
- print "\t".loc("Couldn't find suitable transaction, skipping")."\n"
- if $verbose && !$found;
- } else {
- print "\t".loc("Processing without transaction, some conditions and actions may fail. Consider using --transaction argument")."\n"
- if $verbose;
-
- process($ticket, undef, $template_obj);
- }
-}
-
-sub process {
- my $ticket = shift;
- my $transaction = shift;
- my $template_obj = shift;
-
- # perform some more advanced check
- if ($condition) {
- my $condition_obj = $condition->new(
- TransactionObj => $transaction,
- TicketObj => $ticket,
- ScripObj => $void_scrip,
- TemplateObj => $template_obj,
- Argument => $condition_arg,
- CurrentUser => $CurrentUser,
- );
-
- # if the condition doesn't apply, get out of here
-
- return unless $condition_obj->IsApplicable;
- print "\t".loc("Condition matches...")."\n" if $verbose;
- }
-
- #prepare our action
- my $action_obj = $action->new(
- TicketObj => $ticket,
- TransactionObj => $transaction,
- TemplateObj => $template_obj,
- Argument => $action_arg,
- ScripObj => $void_scrip,
- ScripActionObj => $void_scrip_action,
- CurrentUser => $CurrentUser,
- );
-
- #if our preparation, move onto the next ticket
- return unless $action_obj->Prepare;
- print "\t".loc("Action prepared...")."\n" if $verbose;
-
- #commit our action.
- return unless $action_obj->Commit;
- print "\t".loc("Action committed.")."\n" if $verbose;
-}
-
-# =head2 get_transactions
-#
-# Takes ticket and returns L<RT::Transactions> object with transactions
-# of the ticket according to command line arguments C<--transaction>
-# and <--transaction-type>.
-#
-# =cut
-
-sub get_transactions {
- my $ticket = shift;
- my $txns = $ticket->Transactions;
- my $order = $transaction eq 'last'? 'DESC': 'ASC';
- $txns->OrderByCols(
- { FIELD => 'Created', ORDER => $order },
- { FIELD => 'id', ORDER => $order },
- );
- if ( $transaction_type ) {
- $transaction_type =~ s/^\s+//;
- $transaction_type =~ s/\s+$//;
- foreach my $type ( split /\s*,\s*/, $transaction_type ) {
- $txns->Limit( FIELD => 'Type', VALUE => $type, ENTRYAGGREGATOR => 'OR' );
- }
- }
- $txns->RowsPerPage(1) unless $transaction eq 'all';
- return $txns;
-}
-
-# =head2 get_template
-#
-# Takes a ticket and returns a template according to command line options.
-#
-# =cut
-
-{ my $cache = undef;
-sub get_template {
- my $ticket = shift;
- return undef unless $template;
-
- unless ( $template =~ /\D/ ) {
- # by id
- return $cache if $cache;
-
- my $cache = RT::Template->new( RT->SystemUser );
- $cache->Load( $template );
- die "Failed to load template '$template'"
- unless $cache->id;
- return $cache;
- }
-
- my $queue = $ticket->Queue;
- return $cache->{ $queue } if $cache->{ $queue };
-
- my $res = RT::Template->new( RT->SystemUser );
- $res->LoadQueueTemplate( Queue => $queue, Name => $template );
- unless ( $res->id ) {
- $res->LoadGlobalTemplate( $template );
- die "Failed to load template '$template', either for queue #$queue or global"
- unless $res->id;
- }
- return $cache->{ $queue } = $res;
-} }
-
-
-# =head2 load_module
-#
-# Loads a perl module, dying nicely if it can't find it.
-#
-# =cut
-
-sub load_module {
- my $modname = shift;
- eval "require $modname";
- if ($@) {
- die loc( "Failed to load module [_1]. ([_2])", $modname, $@ );
- }
-
-}
-
-
-
-# =head2 loc LIST
-#
-# Localize this string, with the current user's currentuser object
-#
-# =cut
-
-sub loc {
- $CurrentUser->loc(@_);
-}
-
-
-sub help {
-
- print loc( "[_1] is a tool to act on tickets from an external scheduling tool, such as cron.", $0 )
- . "\n";
- print loc("It takes several arguments:") . "\n\n";
-
- print " "
- . loc( "[_1] - Specify the search module you want to use", "--search" )
- . "\n";
- print " "
- . loc( "[_1] - An argument to pass to [_2]", "--search-arg", "--search" )
- . "\n";
-
- print " "
- . loc( "[_1] - Specify the condition module you want to use", "--condition" )
- . "\n";
- print " "
- . loc( "[_1] - An argument to pass to [_2]", "--condition-arg", "--condition" )
- . "\n";
- print " "
- . loc( "[_1] - Specify the action module you want to use", "--action" )
- . "\n";
- print " "
- . loc( "[_1] - An argument to pass to [_2]", "--action-arg", "--action" )
- . "\n";
- print " "
- . loc( "[_1] - Specify name or id of template(s) you want to use", "--template" )
- . "\n";
- print " "
- . loc( "[_1] - Specify if you want to use either 'first', 'last' or 'all' transactions", "--transaction" )
- . "\n";
- print " "
- . loc( "[_1] - Specify the comma separated list of transactions' types you want to use", "--transaction-type" )
- . "\n";
- print " "
- . loc( "[_1] - Adjust LogToScreen config option", "--log" ) . "\n";
- print " "
- . loc( "[_1] - Output status updates to STDOUT", "--verbose" ) . "\n";
- print "\n";
- print "\n";
- print loc("Security:")."\n";
- print loc("This tool allows the user to run arbitrary perl modules from within RT.")." ".
- loc("If this tool were setgid, a hostile local user could use this tool to gain administrative access to RT.")." ".
- loc("It is incredibly important that nonprivileged users not be allowed to run this tool."). " " .
- loc("It is suggested that you create a non-privileged unix user with the correct group membership and RT access to run this tool.")."\n";
- print "\n";
- print loc("Example:");
- print "\n";
- print " "
- . loc( "The following command will find all active tickets in the queue 'general' and set their priority to 99 if they are overdue:"
- )
- . "\n\n";
-
- print " bin/rt-crontool \\\n";
- print " --search RT::Search::ActiveTicketsInQueue --search-arg general \\\n";
- print " --condition RT::Condition::Overdue \\\n";
- print " --action RT::Action::SetPriority --action-arg 99 \\\n";
- print " --verbose\n";
-
- print "\n";
- print loc("Escalate tickets"). "\n";
- print " bin/rt-crontool \\\n";
- print " --search RT::Search::ActiveTicketsInQueue --search-arg general \\\n";
- print" --action RT::Action::EscalatePriority\n";
-
-
-
-
-
-
- exit(0);
-}
-
-__END__
-
-=head1 NAME
-
-rt-crontool - a tool to act on tickets from an external scheduling tool
-
-=head1 SYNOPSIS
-
- # find all active tickets in the queue 'general' and set their priority to 99 if they are overdue:
- rt-crontool \
- --search RT::Search::ActiveTicketsInQueue --search-arg general \
- --condition RT::Condition::Overdue \
- --action RT::Action::SetPriority --action-arg 99 \
- --verbose
-
- # Escalate tickets
- rt-crontool \
- --search RT::Search::ActiveTicketsInQueue --search-arg general \
- --action RT::Action::EscalatePriority
-
-=head1 DESCRIPTION
-
-This script is a tool to act on tickets from an external scheduling tool, such
-as cron.
-
-Security:
-
-This tool allows the user to run arbitrary perl modules from within RT. If
-this tool were setgid, a hostile local user could use this tool to gain
-administrative access to RT. It is incredibly important that nonprivileged
-users not be allowed to run this tool. It is suggested that you create a
-non-privileged unix user with the correct group membership and RT access to
-run this tool.
-
-
-=head1 OPTIONS
-
-=over
-
-=item search
-
-Specify the search module you want to use
-
-=item search-arg
-
-An argument to pass to --search
-
-=item condition
-
-Specify the condition module you want to use
-
-=item condition-arg
-
-An argument to pass to --condition
-
-=item action
-
-Specify the action module you want to use
-
-=item action-arg
-
-An argument to pass to --action
-
-=item template
-
-Specify name or id of template(s) you want to use
-
-=item transaction
-
-Specify if you want to use either 'first', 'last' or 'all' transactions
-
-
-=item transaction-type
-
-Specify the comma separated list of transactions' types you want to use
-
-=item log
-
-Adjust LogToScreen config option
-
-=item verbose
-
-Output status updates to STDOUT
-
-=back
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-=head1 NAME
-
-rt-mailgate - Mail interface to RT.
-
-=cut
-
-use strict;
-use warnings;
-
-use Getopt::Long;
-
-my $opts = { };
-GetOptions( $opts, "queue=s", "action=s", "url=s",
- "jar=s", "help", "debug", "extension=s",
- "timeout=i", "verify-ssl!", "ca-file=s",
- );
-
-my $gateway = RT::Client::MailGateway->new();
-
-$gateway->run($opts);
-
-package RT::Client::MailGateway;
-
-use LWP::UserAgent;
-use HTTP::Request::Common qw($DYNAMIC_FILE_UPLOAD);
-use File::Temp qw(tempfile tempdir);
-$DYNAMIC_FILE_UPLOAD = 1;
-
-use constant EX_TEMPFAIL => 75;
-use constant BUFFER_SIZE => 8192;
-
-sub new {
- my $class = shift;
- my $self = bless {}, $class;
- return $self;
-}
-
-sub run {
- my $self = shift;
- my $opts = shift;
-
- if ( $opts->{running_in_test_harness} ) {
- $self->{running_in_test_harness} = 1;
- }
-
- $self->validate_cli_flags($opts);
-
- my $ua = $self->get_useragent($opts);
- my $post_params = $self->setup_session($opts);
- $self->upload_message( $ua => $post_params );
- $self->exit_with_success();
-}
-
-sub exit_with_success {
- my $self = shift;
- if ( $self->{running_in_test_harness} ) {
- return 1;
- } else {
- exit 0;
- }
-}
-
-sub tempfail {
- my $self = shift;
- if ( $self->{running_in_test_harness} ) {
- die "tempfail";
- } else {
-
- exit EX_TEMPFAIL;
- }
-}
-
-sub permfail {
- my $self = shift;
- if ( $self->{running_in_test_harness} ) {
- die "permfail";
- } else {
-
- exit 1;
- }
-}
-
-sub validate_cli_flags {
- my $self = shift;
- my $opts = shift;
- if ( $opts->{'help'} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage( { verbose => 2 } );
- return $self->permfail()
- ; # Don't want to succeed if this is really an email!
- }
-
- unless ( $opts->{'url'} ) {
- print STDERR
- "$0 invoked improperly\n\nNo 'url' provided to mail gateway!\n";
- return $self->permfail();
- }
-
- if (($opts->{'ca-file'} or $opts->{"verify-ssl"})
- and not LWP::UserAgent->can("ssl_opts")) {
- print STDERR "Verifying SSL certificates requires LWP::UserAgent 6.0 or higher.\n";
- return $self->tempfail();
- }
-
- $opts->{"verify-ssl"} = 1 unless defined $opts->{"verify-ssl"};
-}
-
-sub get_useragent {
- my $self = shift;
- my $opts = shift;
- my $ua = LWP::UserAgent->new();
- $ua->cookie_jar( { file => $opts->{'jar'} } ) if $opts->{'jar'};
-
- if ( $ua->can("ssl_opts") ) {
- $ua->ssl_opts( verify_hostname => $opts->{'verify-ssl'} );
- $ua->ssl_opts( SSL_ca_file => $opts->{'ca-file'} )
- if $opts->{'ca-file'};
- }
-
- return $ua;
-}
-
-sub setup_session {
- my $self = shift;
- my $opts = shift;
- my %post_params;
- $post_params{SessionType} = 'REST'; # Surpress login box
- foreach (qw(queue action)) {
- $post_params{$_} = $opts->{$_} if defined $opts->{$_};
- }
-
- if ( ( $opts->{'extension'} || '' ) =~ /^(?:action|queue|ticket)$/i ) {
- $post_params{ lc $opts->{'extension'} } = $ENV{'EXTENSION'}
- || $opts->{ $opts->{'extension'} };
- } elsif ( $opts->{'extension'} && $ENV{'EXTENSION'} ) {
- print STDERR
- "Value of the --extension argument is not action, queue or ticket"
- . ", but environment variable EXTENSION is also defined. The former is ignored.\n";
- }
-
- # add ENV{'EXTENSION'} as X-RT-MailExtension to the message header
- if ( my $value = ( $ENV{'EXTENSION'} || $opts->{'extension'} ) ) {
-
- # prepare value to avoid MIME format breakage
- # strip trailing newline symbols
- $value =~ s/(\r*\n)+$//;
-
- # make a correct multiline header field,
- # with tabs in the beginning of each line
- $value =~ s/(\r*\n)/$1\t/g;
- $opts->{'headers'} .= "X-RT-Mail-Extension: $value\n";
- }
-
- # Read the message in from STDIN
- # _raw_message is used for testing
- my $message = $opts->{'_raw_message'} || $self->slurp_message();
- unless ( $message->{'filename'} ) {
- $post_params{'message'} = [
- undef, '',
- 'Content-Type' => 'application/octet-stream',
- Content => ${ $message->{'content'} },
- ];
- } else {
- $post_params{'message'} = [
- $message->{'filename'}, '',
- 'Content-Type' => 'application/octet-stream',
- ];
- }
-
- return \%post_params;
-}
-
-sub upload_message {
- my $self = shift;
- my $ua = shift;
- my $post_params = shift;
- my $full_url = $opts->{'url'} . "/REST/1.0/NoAuth/mail-gateway";
- print STDERR "$0: connecting to $full_url\n" if $opts->{'debug'};
-
- $ua->timeout( exists( $opts->{'timeout'} ) ? $opts->{'timeout'} : 180 );
- my $r = $ua->post( $full_url, $post_params, Content_Type => 'form-data' );
- $self->check_failure($r);
-
- my $content = $r->content;
- print STDERR $content . "\n" if $opts->{'debug'};
-
- return if ( $content =~ /^(ok|not ok)/ );
-
- # It's not the server's fault if the mail is bogus. We just want to know that
- # *something* came out of the server.
- print STDERR <<EOF;
-RT server error.
-
-The RT server which handled your email did not behave as expected. It
-said:
-
-$content
-EOF
-
- return $self->tempfail();
-}
-
-sub check_failure {
- my $self = shift;
- my $r = shift;
- return if $r->is_success;
-
- # This ordinarily oughtn't to be able to happen, suggests a bug in RT.
- # So only load these heavy modules when they're needed.
- require HTML::TreeBuilder;
- require HTML::FormatText;
-
- my $error = $r->error_as_HTML;
- my $tree = HTML::TreeBuilder->new->parse($error);
- $tree->eof;
-
- # It'll be a cold day in hell before RT sends out bounces in HTML
- my $formatter =
- HTML::FormatText->new( leftmargin => 0,
- rightmargin => 50, );
- print STDERR $formatter->format($tree);
- print STDERR "\n$0: undefined server error\n" if $opts->{'debug'};
- return $self->tempfail();
-}
-
-sub slurp_message {
- my $self = shift;
-
- local $@;
-
- my %message;
- my ( $fh, $filename )
- = eval { tempfile( DIR => tempdir( CLEANUP => 1 ) ) };
- if ( !$fh || $@ ) {
- print STDERR "$0: Couldn't create temp file, using memory\n";
- print STDERR "error: $@\n" if $@;
-
- my $message = \do { local ( @ARGV, $/ ); <STDIN> };
- unless ( $$message =~ /\S/ ) {
- print STDERR "$0: no message passed on STDIN\n";
- $self->exit_with_success;
- }
- $$message = $opts->{'headers'} . $$message if $opts->{'headers'};
- return ( { content => $message } );
- }
-
- binmode $fh;
- binmode \*STDIN;
-
- print $fh $opts->{'headers'} if $opts->{'headers'};
-
- my $buf;
- my $empty = 1;
- while (1) {
- my $status = read \*STDIN, $buf, BUFFER_SIZE;
- unless ( defined $status ) {
- print STDERR "$0: couldn't read message: $!\n";
- return $self->tempfail();
- } elsif ( !$status ) {
- last;
- }
- $empty = 0 if $buf =~ /\S/;
- print $fh $buf;
- }
- close $fh;
-
- if ($empty) {
- print STDERR "$0: no message passed on STDIN\n";
- $self->exit_with_success;
- }
- print STDERR "$0: temp file is '$filename'\n" if $opts->{'debug'};
- return ( { filename => $filename } );
-}
-
-=head1 SYNOPSIS
-
- rt-mailgate --help : this text
-
-Usual invocation (from MTA):
-
- rt-mailgate --action (correspond|comment|...) --queue queuename
- --url http://your.rt.server/
- [ --debug ]
- [ --extension (queue|action|ticket) ]
- [ --timeout seconds ]
-
-
-
-=head1 OPTIONS
-
-=over 3
-
-=item C<--action>
-
-Specifies what happens to email sent to this alias. The avaliable
-basic actions are: C<correspond>, C<comment>.
-
-
-If you've set the RT configuration variable B<< C<UnsafeEmailCommands> >>,
-C<take> and C<resolve> are also available. You can execute two or more
-actions on a single message using a C<-> separated list. RT will execute
-the actions in the listed order. For example you can use C<take-comment>,
-C<correspond-resolve> or C<take-comment-resolve> as actions.
-
-Note that C<take> and C<resolve> actions ignore message text if used
-alone. Include a C<comment> or C<correspond> action if you want RT
-to record the incoming message.
-
-The default action is C<correspond>.
-
-=item C<--queue>
-
-This flag determines which queue this alias should create a ticket in if no ticket identifier
-is found.
-
-=item C<--url>
-
-This flag tells the mail gateway where it can find your RT server. You should
-probably use the same URL that users use to log into RT.
-
-If your RT server uses SSL, you will need to install additional Perl
-libraries. RT will detect and install these dependencies if you pass the
-C<--enable-ssl-mailgate> flag to configure as documented in RT's README.
-
-If you have a self-signed SSL certificate, you may also need to pass
-C<--ca-file> or C<--no-verify-ssl>, below.
-
-=item C<--ca-file> I<path>
-
-Specifies the path to the public SSL certificate for the certificate
-authority that should be used to verify the website's SSL certificate.
-If your webserver uses a self-signed certificate, you should
-preferentially use this option over C<--no-verify-ssl>, as it will
-ensure that the self-signed certificate that the mailgate is seeing the
-I<right> self-signed certificate.
-
-=item C<--no-verify-ssl>
-
-This flag tells the mail gateway to trust all SSL certificates,
-regardless of if their hostname matches the certificate, and regardless
-of CA. This is required if you have a self-signed certificate, or some
-other certificate which is not traceable back to an certificate your
-system ultimitely trusts.
-
-Verifying SSL certificates requires L<LWP::UserAgent> version 6.0 or
-higher; explicitly passing C<--verify-ssl> on prior versions will error.
-
-=item C<--extension> OPTIONAL
-
-Some MTAs will route mail sent to user-foo@host or user+foo@host to user@host
-and present "foo" in the environment variable $EXTENSION. By specifying
-the value "queue" for this parameter, the queue this message should be
-submitted to will be set to the value of $EXTENSION. By specifying
-"ticket", $EXTENSION will be interpreted as the id of the ticket this message
-is related to. "action" will allow the user to specify either "comment" or
-"correspond" in the address extension.
-
-=item C<--debug> OPTIONAL
-
-Print debugging output to standard error
-
-
-=item C<--timeout> OPTIONAL
-
-Configure the timeout for posting the message to the web server. The
-default timeout is 3 minutes (180 seconds).
-
-=back
-
-
-=head1 DESCRIPTION
-
-The RT mail gateway is the primary mechanism for communicating with RT
-via email. This program simply directs the email to the RT web server,
-which handles filing correspondence and sending out any required mail.
-It is designed to be run as part of the mail delivery process, either
-called directly by the MTA or C<procmail>, or in a F<.forward> or
-equivalent.
-
-=head1 SETUP
-
-Much of the set up of the mail gateway depends on your MTA and mail
-routing configuration. However, you will need first of all to create an
-RT user for the mail gateway and assign it a password; this helps to
-ensure that mail coming into the web server did originate from the
-gateway.
-
-Next, you need to route mail to C<rt-mailgate> for the queues you're
-monitoring. For instance, if you're using F</etc/aliases> and you have a
-"bugs" queue, you will want something like this:
-
- bugs: "|/opt/rt4/bin/rt-mailgate --queue bugs --action correspond
- --url http://rt.mycorp.com/"
-
- bugs-comment: "|/opt/rt4/bin/rt-mailgate --queue bugs --action comment
- --url http://rt.mycorp.com/"
-
-Note that you don't have to run your RT server on your mail server, as
-the mail gateway will happily relay to a different machine.
-
-=head1 CUSTOMIZATION
-
-By default, the mail gateway will accept mail from anyone. However,
-there are situations in which you will want to authenticate users
-before allowing them to communicate with the system. You can do this
-via a plug-in mechanism in the RT configuration.
-
-You can set the array C<@MailPlugins> to be a list of plugins. The
-default plugin, if this is not given, is C<Auth::MailFrom> - that is,
-authentication of the person is done based on the C<From> header of the
-email. If you have additional filters or authentication mechanisms, you
-can list them here and they will be called in order:
-
- Set( @MailPlugins =>
- "Filter::SpamAssassin",
- "Auth::LDAP",
- # ...
- );
-
-See the documentation for any additional plugins you have.
-
-You may also put Perl subroutines into the C<@MailPlugins> array, if
-they behave as described below.
-
-=head1 WRITING PLUGINS
-
-What's actually going on in the above is that C<@MailPlugins> is a
-list of Perl modules; RT prepends C<RT::Interface::Email::> to the name,
-to form a package name, and then C<use>'s this module. The module is
-expected to provide a C<GetCurrentUser> subroutine, which takes a hash of
-several parameters:
-
-=over 4
-
-=item Message
-
-A C<MIME::Entity> object representing the email
-
-=item CurrentUser
-
-An C<RT::CurrentUser> object
-
-=item AuthStat
-
-The authentication level returned from the previous plugin.
-
-=item Ticket [OPTIONAL]
-
-The ticket under discussion
-
-=item Queue [OPTIONAL]
-
-If we don't already have a ticket id, we need to know which queue we're talking about
-
-=item Action
-
-The action being performed. At the moment, it's one of "comment" or "correspond"
-
-=back
-
-It returns two values, the new C<RT::CurrentUser> object, and the new
-authentication level. The authentication level can be zero, not allowed
-to communicate with RT at all, (a "permission denied" error is mailed to
-the correspondent) or one, which is the normal mode of operation.
-Additionally, if C<-1> is returned, then the processing of the plug-ins
-stops immediately and the message is ignored.
-
-=head1 ENVIRONMENT
-
-=over 4
-
-=item EXTENSION
-
-Some MTAs will route mail sent to user-foo@host or user+foo@host to user@host
-and present "foo" in the environment variable C<EXTENSION>. Mailgate adds value
-of this variable to message in the C<X-RT-Mail-Extension> field of the message
-header.
-
-See also C<--extension> option. Note that value of the environment variable is
-always added to the message header when it's not empty even if C<--extension>
-option is not provided.
-
-=back
-
-=cut
-
+++ /dev/null
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by RT configure rt-4.0.5, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- $ ./configure --enable-layout=Freeside --with-db-type=Pg --with-db-dba=freeside --with-db-database=freeside --with-db-rt-user=freeside --with-db-rt-pass= --with-web-user=freeside --with-web-group=freeside --with-rt-group=freeside --with-web-handler=modperl2
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = fleetpaw
-uname -m = x86_64
-uname -r = 3.2.0-2-amd64
-uname -s = Linux
-uname -v = #1 SMP Sun Apr 15 16:47:38 UTC 2012
-
-/usr/bin/uname -p = unknown
-/bin/uname -X = unknown
-
-/bin/arch = unknown
-/usr/bin/arch -k = unknown
-/usr/convex/getsysinfo = unknown
-/usr/bin/hostinfo = unknown
-/bin/machine = unknown
-/usr/bin/oslevel = unknown
-/bin/universe = unknown
-
-PATH: /usr/local/sbin
-PATH: /usr/local/bin
-PATH: /usr/sbin
-PATH: /usr/bin
-PATH: /sbin
-PATH: /bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:2006: checking for a BSD-compatible install
-configure:2074: result: /usr/bin/install -c
-configure:2088: checking for perl
-configure:2106: found /usr/bin/perl
-configure:2119: result: /usr/bin/perl
-configure:2497: checking for chosen layout
-configure:2510: result: Freeside
-configure:2744: checking if database name is set
-configure:2747: result: yes
-configure:2849: checking for gcc
-configure:2865: found /usr/bin/gcc
-configure:2876: result: gcc
-configure:3105: checking for C compiler version
-configure:3114: gcc --version >&5
-gcc (Debian 4.7.0-11) 4.7.0
-Copyright (C) 2012 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:3125: $? = 0
-configure:3114: gcc -v >&5
-Using built-in specs.
-COLLECT_GCC=gcc
-COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper
-Target: x86_64-linux-gnu
-Configured with: ../src/configure -v --with-pkgversion='Debian 4.7.0-11' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --with-arch-32=i586 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
-Thread model: posix
-gcc version 4.7.0 (Debian 4.7.0-11)
-configure:3125: $? = 0
-configure:3114: gcc -V >&5
-gcc: error: unrecognized command line option '-V'
-gcc: fatal error: no input files
-compilation terminated.
-configure:3125: $? = 4
-configure:3114: gcc -qversion >&5
-gcc: error: unrecognized command line option '-qversion'
-gcc: fatal error: no input files
-compilation terminated.
-configure:3125: $? = 4
-configure:3145: checking whether the C compiler works
-configure:3167: gcc conftest.c >&5
-configure:3171: $? = 0
-configure:3219: result: yes
-configure:3222: checking for C compiler default output file name
-configure:3224: result: a.out
-configure:3230: checking for suffix of executables
-configure:3237: gcc -o conftest conftest.c >&5
-configure:3241: $? = 0
-configure:3263: result:
-configure:3285: checking whether we are cross compiling
-configure:3293: gcc -o conftest conftest.c >&5
-configure:3297: $? = 0
-configure:3304: ./conftest
-configure:3308: $? = 0
-configure:3323: result: no
-configure:3328: checking for suffix of object files
-configure:3350: gcc -c conftest.c >&5
-configure:3354: $? = 0
-configure:3375: result: o
-configure:3379: checking whether we are using the GNU C compiler
-configure:3398: gcc -c conftest.c >&5
-configure:3398: $? = 0
-configure:3407: result: yes
-configure:3416: checking whether gcc accepts -g
-configure:3436: gcc -c -g conftest.c >&5
-configure:3436: $? = 0
-configure:3477: result: yes
-configure:3494: checking for gcc option to accept ISO C89
-configure:3558: gcc -c -g -O2 conftest.c >&5
-configure:3558: $? = 0
-configure:3571: result: none needed
-configure:3592: checking for aginitlib in -lgraph
-configure:3617: gcc -o conftest -g -O2 conftest.c -lgraph >&5
-/usr/bin/ld: cannot find -lgraph
-collect2: error: ld returned 1 exit status
-configure:3617: $? = 1
-configure: failed program was:
-| /* confdefs.h */
-| #define PACKAGE_NAME "RT"
-| #define PACKAGE_TARNAME "rt"
-| #define PACKAGE_VERSION "rt-4.0.5"
-| #define PACKAGE_STRING "RT rt-4.0.5"
-| #define PACKAGE_BUGREPORT "rt-bugs@bestpractical.com"
-| #define PACKAGE_URL ""
-| /* end confdefs.h. */
-|
-| /* Override any GCC internal prototype to avoid an error.
-| Use char because int might match the return type of a GCC
-| builtin and then its argument prototype would still apply. */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| char aginitlib ();
-| int
-| main ()
-| {
-| return aginitlib ();
-| ;
-| return 0;
-| }
-configure:3626: result: no
-configure:3652: checking for gdlib-config
-configure:3680: result: no
-configure:3708: checking for gpg
-configure:3724: found /usr/bin/gpg
-configure:3736: result: yes
-configure:4081: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by RT config.status rt-4.0.5, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- CONFIG_FILES =
- CONFIG_HEADERS =
- CONFIG_LINKS =
- CONFIG_COMMANDS =
- $ ./config.status
-
-on fleetpaw
-
-config.status:878: creating etc/upgrade/3.8-branded-queues-extension
-config.status:878: creating etc/upgrade/3.8-ical-extension
-config.status:878: creating etc/upgrade/split-out-cf-categories
-config.status:878: creating etc/upgrade/generate-rtaddressregexp
-config.status:878: creating etc/upgrade/upgrade-articles
-config.status:878: creating etc/upgrade/vulnerable-passwords
-config.status:878: creating sbin/rt-attributes-viewer
-config.status:878: creating sbin/rt-preferences-viewer
-config.status:878: creating sbin/rt-session-viewer
-config.status:878: creating sbin/rt-dump-metadata
-config.status:878: creating sbin/rt-setup-database
-config.status:878: creating sbin/rt-test-dependencies
-config.status:878: creating sbin/rt-email-digest
-config.status:878: creating sbin/rt-email-dashboards
-config.status:878: creating sbin/rt-clean-sessions
-config.status:878: creating sbin/rt-shredder
-config.status:878: creating sbin/rt-validator
-config.status:878: creating sbin/rt-email-group-admin
-config.status:878: creating sbin/rt-server
-config.status:878: creating sbin/rt-server.fcgi
-config.status:878: creating sbin/standalone_httpd
-config.status:878: creating sbin/rt-setup-fulltext-index
-config.status:878: creating sbin/rt-fulltext-indexer
-config.status:878: creating bin/rt-crontool
-config.status:878: creating bin/rt-mailgate
-config.status:878: creating bin/rt
-config.status:878: creating Makefile
-config.status:878: creating etc/RT_Config.pm
-config.status:878: creating lib/RT/Generated.pm
-config.status:878: creating t/data/configs/apache2.2+mod_perl.conf
-config.status:878: creating t/data/configs/apache2.2+fastcgi.conf
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_c_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_LIBS_set=
-ac_cv_env_LIBS_value=
-ac_cv_env_PERL_set=
-ac_cv_env_PERL_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_lib_graph_aginitlib=no
-ac_cv_objext=o
-ac_cv_path_PERL=/usr/bin/perl
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_RT_GD=no
-ac_cv_prog_RT_GPG=yes
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_cc_c89=
-ac_cv_prog_cc_g=yes
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-APACHECTL='/usr/sbin/apachectl'
-BIN_OWNER='root'
-CC='gcc'
-CFLAGS='-g -O2'
-COMMENT_INPLACE_LAYOUT=''
-CONFIGURE_INCANT='./configure --enable-layout=Freeside --with-db-type=Pg --with-db-dba=freeside --with-db-database=freeside --with-db-rt-user=freeside --with-db-rt-pass= --with-web-user=freeside --with-web-group=freeside --with-rt-group=freeside --with-web-handler=modperl2'
-CONFIG_FILE_PATH='/opt/rt3/etc'
-CONFIG_FILE_PATH_R='/opt/rt3/etc'
-CPPFLAGS=''
-DATABASE_ENV_PREF=''
-DB_DATABASE='freeside'
-DB_DBA='freeside'
-DB_HOST='localhost'
-DB_PORT=''
-DB_RT_HOST='localhost'
-DB_RT_PASS=''
-DB_RT_USER='freeside'
-DB_TYPE='Pg'
-DEFS='-DPACKAGE_NAME=\"RT\" -DPACKAGE_TARNAME=\"rt\" -DPACKAGE_VERSION=\"rt-4.0.5\" -DPACKAGE_STRING=\"RT\ rt-4.0.5\" -DPACKAGE_BUGREPORT=\"rt-bugs@bestpractical.com\" -DPACKAGE_URL=\"\"'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EXEEXT=''
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-LDFLAGS=''
-LIBOBJS=''
-LIBS=''
-LIBS_GROUP='bin'
-LIBS_OWNER='root'
-LOCAL_ETC_PATH='/opt/rt3/local/etc'
-LOCAL_ETC_PATH_R='/opt/rt3/local/etc'
-LOCAL_LEXICON_PATH='/opt/rt3/local/po'
-LOCAL_LEXICON_PATH_R='/opt/rt3/local/po'
-LOCAL_LIB_PATH='/opt/rt3/local/lib'
-LOCAL_LIB_PATH_R='/opt/rt3/local/lib'
-LOCAL_PLUGIN_PATH='/opt/rt3/local/plugins'
-LOCAL_PLUGIN_PATH_R='/opt/rt3/local/plugins'
-LTLIBOBJS=''
-MASON_DATA_PATH='/usr/local/etc/freeside/masondata'
-MASON_DATA_PATH_R='/usr/local/etc/freeside/masondata'
-MASON_HTML_PATH='/var/www/freeside/rt'
-MASON_HTML_PATH_R='/var/www/freeside/rt'
-MASON_LOCAL_HTML_PATH='/opt/rt3/local/html'
-MASON_LOCAL_HTML_PATH_R='/opt/rt3/local/html'
-MASON_SESSION_PATH='/opt/rt3/var/session_data'
-MASON_SESSION_PATH_R='/opt/rt3/var/session_data'
-OBJEXT='o'
-PACKAGE_BUGREPORT='rt-bugs@bestpractical.com'
-PACKAGE_NAME='RT'
-PACKAGE_STRING='RT rt-4.0.5'
-PACKAGE_TARNAME='rt'
-PACKAGE_URL=''
-PACKAGE_VERSION='rt-4.0.5'
-PATH_SEPARATOR=':'
-PERL='/usr/bin/perl'
-RTGROUP='freeside'
-RT_BIN_PATH='/opt/rt3/bin'
-RT_BIN_PATH_R='/opt/rt3/bin'
-RT_DEVEL_MODE='0'
-RT_DOC_PATH='/opt/rt3/docs'
-RT_DOC_PATH_R='/opt/rt3/docs'
-RT_ETC_PATH='/opt/rt3/etc'
-RT_ETC_PATH_R='/opt/rt3/etc'
-RT_FONT_PATH='/opt/rt3/share/fonts'
-RT_FONT_PATH_R='/opt/rt3/share/fonts'
-RT_GD='0'
-RT_GPG='1'
-RT_GRAPHVIZ='0'
-RT_LEXICON_PATH='/opt/rt3/share/po'
-RT_LEXICON_PATH_R='/opt/rt3/share/po'
-RT_LIB_PATH='/opt/rt3/lib'
-RT_LIB_PATH_R='/opt/rt3/lib'
-RT_LOCAL_PATH='/opt/rt3/local'
-RT_LOCAL_PATH_R='/opt/rt3/local'
-RT_LOG_PATH='/opt/rt3/var/log'
-RT_LOG_PATH_R='/opt/rt3/var/log'
-RT_MAN_PATH='/opt/rt3/man'
-RT_MAN_PATH_R='/opt/rt3/man'
-RT_PATH='/opt/rt3'
-RT_PATH_R='/opt/rt3'
-RT_PLUGIN_PATH='/opt/rt3/plugins'
-RT_PLUGIN_PATH_R='/opt/rt3/plugins'
-RT_SBIN_PATH='/opt/rt3/sbin'
-RT_SBIN_PATH_R='/opt/rt3/sbin'
-RT_SSL_MAILGATE='0'
-RT_VAR_PATH='/opt/rt3/var'
-RT_VAR_PATH_R='/opt/rt3/var'
-RT_VERSION_MAJOR='4'
-RT_VERSION_MINOR='0'
-RT_VERSION_PATCH='5'
-SHELL='/bin/bash'
-WEB_GROUP='freeside'
-WEB_HANDLER='modperl2'
-WEB_USER='freeside'
-ac_ct_CC='gcc'
-bindir='/opt/rt3/bin'
-build_alias=''
-customdir='/opt/rt3/local'
-custometcdir='/opt/rt3/local/etc'
-customhtmldir='/opt/rt3/local/html'
-customlexdir='/opt/rt3/local/po'
-customlibdir='/opt/rt3/local/lib'
-customplugindir='/opt/rt3/local/plugins'
-datadir='/opt/rt3/share'
-datarootdir='${prefix}/share'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-dvidir='${docdir}'
-exec_prefix='/opt/rt3'
-exp_bindir='/opt/rt3/bin'
-exp_customdir='/opt/rt3/local'
-exp_custometcdir='/opt/rt3/local/etc'
-exp_customhtmldir='/opt/rt3/local/html'
-exp_customlexdir='/opt/rt3/local/po'
-exp_customlibdir='/opt/rt3/local/lib'
-exp_customplugindir='/opt/rt3/local/plugins'
-exp_datadir='/opt/rt3/share'
-exp_exec_prefix='/opt/rt3'
-exp_fontdir='/opt/rt3/share/fonts'
-exp_htmldir='/var/www/freeside/rt'
-exp_lexdir='/opt/rt3/share/po'
-exp_libdir='/opt/rt3/lib'
-exp_localstatedir='/opt/rt3/var'
-exp_logfiledir='/opt/rt3/var/log'
-exp_mandir='/opt/rt3/man'
-exp_manualdir='/opt/rt3/docs'
-exp_masonstatedir='/usr/local/etc/freeside/masondata'
-exp_plugindir='/opt/rt3/plugins'
-exp_prefix='/opt/rt3'
-exp_sbindir='/opt/rt3/sbin'
-exp_sessionstatedir='/opt/rt3/var/session_data'
-exp_sysconfdir='/opt/rt3/etc'
-fontdir='/opt/rt3/share/fonts'
-host_alias=''
-htmldir='/var/www/freeside/rt'
-includedir='${prefix}/include'
-infodir='${datarootdir}/info'
-lexdir='/opt/rt3/share/po'
-libdir='/opt/rt3/lib'
-libexecdir='${exec_prefix}/libexec'
-localedir='${datarootdir}/locale'
-localstatedir='/opt/rt3/var'
-logfiledir='/opt/rt3/var/log'
-mandir='/opt/rt3/man'
-manualdir='/opt/rt3/docs'
-masonstatedir='/usr/local/etc/freeside/masondata'
-oldincludedir='/usr/include'
-pdfdir='${docdir}'
-plugindir='/opt/rt3/plugins'
-prefix='/opt/rt3'
-program_transform_name='s,x,x,'
-psdir='${docdir}'
-rt_layout_name='Freeside'
-rt_version_major='4'
-rt_version_minor='0'
-rt_version_patch='5'
-sbindir='/opt/rt3/sbin'
-sessionstatedir='/opt/rt3/var/session_data'
-sharedstatedir='${prefix}/com'
-sysconfdir='/opt/rt3/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-/* confdefs.h */
-#define PACKAGE_NAME "RT"
-#define PACKAGE_TARNAME "rt"
-#define PACKAGE_VERSION "rt-4.0.5"
-#define PACKAGE_STRING "RT rt-4.0.5"
-#define PACKAGE_BUGREPORT "rt-bugs@bestpractical.com"
-#define PACKAGE_URL ""
-
-configure: exit 0
+++ /dev/null
-#! /bin/bash
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=${CONFIG_SHELL-/bin/bash}
-export SHELL
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by RT $as_me rt-4.0.5, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-# Files that config.status was made for.
-config_files=" etc/upgrade/3.8-branded-queues-extension etc/upgrade/3.8-ical-extension etc/upgrade/split-out-cf-categories etc/upgrade/generate-rtaddressregexp etc/upgrade/upgrade-articles etc/upgrade/vulnerable-passwords sbin/rt-attributes-viewer sbin/rt-preferences-viewer sbin/rt-session-viewer sbin/rt-dump-metadata sbin/rt-setup-database sbin/rt-test-dependencies sbin/rt-email-digest sbin/rt-email-dashboards sbin/rt-clean-sessions sbin/rt-shredder sbin/rt-validator sbin/rt-email-group-admin sbin/rt-server sbin/rt-server.fcgi sbin/standalone_httpd sbin/rt-setup-fulltext-index sbin/rt-fulltext-indexer bin/rt-crontool bin/rt-mailgate bin/rt Makefile etc/RT_Config.pm lib/RT/Generated.pm t/data/configs/apache2.2+mod_perl.conf t/data/configs/apache2.2+fastcgi.conf"
-
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <rt-bugs@bestpractical.com>."
-
-ac_cs_config="'--enable-layout=Freeside' '--with-db-type=Pg' '--with-db-dba=freeside' '--with-db-database=freeside' '--with-db-rt-user=freeside' '--with-db-rt-pass=' '--with-web-user=freeside' '--with-web-group=freeside' '--with-rt-group=freeside' '--with-web-handler=modperl2'"
-ac_cs_version="\
-RT config.status rt-4.0.5
-configured by ./configure, generated by GNU Autoconf 2.68,
- with options \"$ac_cs_config\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='/home/ivan/freeside_rt4/rt'
-srcdir='.'
-INSTALL='/usr/bin/install -c'
-test -n "$AWK" || AWK=awk
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
- set X '/bin/bash' './configure' '--enable-layout=Freeside' '--with-db-type=Pg' '--with-db-dba=freeside' '--with-db-database=freeside' '--with-db-rt-user=freeside' '--with-db-rt-pass=' '--with-web-user=freeside' '--with-web-group=freeside' '--with-rt-group=freeside' '--with-web-handler=modperl2' $ac_configure_extra_args --no-create --no-recursion
- shift
- $as_echo "running CONFIG_SHELL=/bin/bash $*" >&6
- CONFIG_SHELL='/bin/bash'
- export CONFIG_SHELL
- exec "$@"
-fi
-
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "etc/upgrade/3.8-branded-queues-extension") CONFIG_FILES="$CONFIG_FILES etc/upgrade/3.8-branded-queues-extension" ;;
- "etc/upgrade/3.8-ical-extension") CONFIG_FILES="$CONFIG_FILES etc/upgrade/3.8-ical-extension" ;;
- "etc/upgrade/split-out-cf-categories") CONFIG_FILES="$CONFIG_FILES etc/upgrade/split-out-cf-categories" ;;
- "etc/upgrade/generate-rtaddressregexp") CONFIG_FILES="$CONFIG_FILES etc/upgrade/generate-rtaddressregexp" ;;
- "etc/upgrade/upgrade-articles") CONFIG_FILES="$CONFIG_FILES etc/upgrade/upgrade-articles" ;;
- "etc/upgrade/vulnerable-passwords") CONFIG_FILES="$CONFIG_FILES etc/upgrade/vulnerable-passwords" ;;
- "sbin/rt-attributes-viewer") CONFIG_FILES="$CONFIG_FILES sbin/rt-attributes-viewer" ;;
- "sbin/rt-preferences-viewer") CONFIG_FILES="$CONFIG_FILES sbin/rt-preferences-viewer" ;;
- "sbin/rt-session-viewer") CONFIG_FILES="$CONFIG_FILES sbin/rt-session-viewer" ;;
- "sbin/rt-dump-metadata") CONFIG_FILES="$CONFIG_FILES sbin/rt-dump-metadata" ;;
- "sbin/rt-setup-database") CONFIG_FILES="$CONFIG_FILES sbin/rt-setup-database" ;;
- "sbin/rt-test-dependencies") CONFIG_FILES="$CONFIG_FILES sbin/rt-test-dependencies" ;;
- "sbin/rt-email-digest") CONFIG_FILES="$CONFIG_FILES sbin/rt-email-digest" ;;
- "sbin/rt-email-dashboards") CONFIG_FILES="$CONFIG_FILES sbin/rt-email-dashboards" ;;
- "sbin/rt-clean-sessions") CONFIG_FILES="$CONFIG_FILES sbin/rt-clean-sessions" ;;
- "sbin/rt-shredder") CONFIG_FILES="$CONFIG_FILES sbin/rt-shredder" ;;
- "sbin/rt-validator") CONFIG_FILES="$CONFIG_FILES sbin/rt-validator" ;;
- "sbin/rt-email-group-admin") CONFIG_FILES="$CONFIG_FILES sbin/rt-email-group-admin" ;;
- "sbin/rt-server") CONFIG_FILES="$CONFIG_FILES sbin/rt-server" ;;
- "sbin/rt-server.fcgi") CONFIG_FILES="$CONFIG_FILES sbin/rt-server.fcgi" ;;
- "sbin/standalone_httpd") CONFIG_FILES="$CONFIG_FILES sbin/standalone_httpd" ;;
- "sbin/rt-setup-fulltext-index") CONFIG_FILES="$CONFIG_FILES sbin/rt-setup-fulltext-index" ;;
- "sbin/rt-fulltext-indexer") CONFIG_FILES="$CONFIG_FILES sbin/rt-fulltext-indexer" ;;
- "bin/rt-crontool") CONFIG_FILES="$CONFIG_FILES bin/rt-crontool" ;;
- "bin/rt-mailgate") CONFIG_FILES="$CONFIG_FILES bin/rt-mailgate" ;;
- "bin/rt") CONFIG_FILES="$CONFIG_FILES bin/rt" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "etc/RT_Config.pm") CONFIG_FILES="$CONFIG_FILES etc/RT_Config.pm" ;;
- "lib/RT/Generated.pm") CONFIG_FILES="$CONFIG_FILES lib/RT/Generated.pm" ;;
- "t/data/configs/apache2.2+mod_perl.conf") CONFIG_FILES="$CONFIG_FILES t/data/configs/apache2.2+mod_perl.conf" ;;
- "t/data/configs/apache2.2+fastcgi.conf") CONFIG_FILES="$CONFIG_FILES t/data/configs/apache2.2+fastcgi.conf" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-cat >>"$ac_tmp/subs1.awk" <<\_ACAWK &&
-S["LTLIBOBJS"]=""
-S["LIBOBJS"]=""
-S["RT_LOG_PATH_R"]="/opt/rt3/var/log"
-S["LOCAL_PLUGIN_PATH_R"]="/opt/rt3/local/plugins"
-S["LOCAL_LIB_PATH_R"]="/opt/rt3/local/lib"
-S["LOCAL_LEXICON_PATH_R"]="/opt/rt3/local/po"
-S["MASON_LOCAL_HTML_PATH_R"]="/opt/rt3/local/html"
-S["LOCAL_ETC_PATH_R"]="/opt/rt3/local/etc"
-S["MASON_HTML_PATH_R"]="/var/www/freeside/rt"
-S["MASON_SESSION_PATH_R"]="/opt/rt3/var/session_data"
-S["MASON_DATA_PATH_R"]="/usr/local/etc/freeside/masondata"
-S["RT_PLUGIN_PATH_R"]="/opt/rt3/plugins"
-S["RT_LEXICON_PATH_R"]="/opt/rt3/share/po"
-S["RT_FONT_PATH_R"]="/opt/rt3/share/fonts"
-S["RT_MAN_PATH_R"]="/opt/rt3/man"
-S["RT_VAR_PATH_R"]="/opt/rt3/var"
-S["RT_SBIN_PATH_R"]="/opt/rt3/sbin"
-S["RT_BIN_PATH_R"]="/opt/rt3/bin"
-S["CONFIG_FILE_PATH_R"]="/opt/rt3/etc"
-S["RT_ETC_PATH_R"]="/opt/rt3/etc"
-S["RT_LIB_PATH_R"]="/opt/rt3/lib"
-S["RT_LOCAL_PATH_R"]="/opt/rt3/local"
-S["RT_DOC_PATH_R"]="/opt/rt3/docs"
-S["RT_PATH_R"]="/opt/rt3"
-S["RT_LOG_PATH"]="/opt/rt3/var/log"
-S["LOCAL_PLUGIN_PATH"]="/opt/rt3/local/plugins"
-S["LOCAL_LIB_PATH"]="/opt/rt3/local/lib"
-S["LOCAL_LEXICON_PATH"]="/opt/rt3/local/po"
-S["MASON_LOCAL_HTML_PATH"]="/opt/rt3/local/html"
-S["LOCAL_ETC_PATH"]="/opt/rt3/local/etc"
-S["MASON_HTML_PATH"]="/var/www/freeside/rt"
-S["MASON_SESSION_PATH"]="/opt/rt3/var/session_data"
-S["MASON_DATA_PATH"]="/usr/local/etc/freeside/masondata"
-S["RT_PLUGIN_PATH"]="/opt/rt3/plugins"
-S["RT_FONT_PATH"]="/opt/rt3/share/fonts"
-S["RT_MAN_PATH"]="/opt/rt3/man"
-S["RT_VAR_PATH"]="/opt/rt3/var"
-S["RT_SBIN_PATH"]="/opt/rt3/sbin"
-S["RT_BIN_PATH"]="/opt/rt3/bin"
-S["CONFIG_FILE_PATH"]="/opt/rt3/etc"
-S["RT_ETC_PATH"]="/opt/rt3/etc"
-S["RT_LEXICON_PATH"]="/opt/rt3/share/po"
-S["RT_LIB_PATH"]="/opt/rt3/lib"
-S["RT_LOCAL_PATH"]="/opt/rt3/local"
-S["RT_DOC_PATH"]="/opt/rt3/docs"
-S["RT_PATH"]="/opt/rt3"
-S["RT_VERSION_PATCH"]="5"
-S["RT_VERSION_MINOR"]="0"
-S["RT_VERSION_MAJOR"]="4"
-S["RT_SSL_MAILGATE"]="0"
-S["RT_GPG"]="1"
-S["RT_GD"]="0"
-S["RT_GRAPHVIZ"]="0"
-S["OBJEXT"]="o"
-S["EXEEXT"]=""
-S["ac_ct_CC"]="gcc"
-S["CPPFLAGS"]=""
-S["LDFLAGS"]=""
-S["CFLAGS"]="-g -O2"
-S["CC"]="gcc"
-S["RT_DEVEL_MODE"]="0"
-S["APACHECTL"]="/usr/sbin/apachectl"
-S["RTGROUP"]="freeside"
-S["WEB_GROUP"]="freeside"
-S["WEB_USER"]="freeside"
-S["DB_RT_PASS"]=""
-S["DB_RT_USER"]="freeside"
-S["DB_DATABASE"]="freeside"
-S["DB_DBA"]="freeside"
-S["DB_RT_HOST"]="localhost"
-S["DB_PORT"]=""
-S["DB_HOST"]="localhost"
-S["DATABASE_ENV_PREF"]=""
-S["DB_TYPE"]="Pg"
-S["LIBS_GROUP"]="bin"
-S["LIBS_OWNER"]="root"
-S["BIN_OWNER"]="root"
-S["COMMENT_INPLACE_LAYOUT"]=""
-S["rt_layout_name"]="Freeside"
-S["exp_customlibdir"]="/opt/rt3/local/lib"
-S["customlibdir"]="/opt/rt3/local/lib"
-S["exp_customlexdir"]="/opt/rt3/local/po"
-S["customlexdir"]="/opt/rt3/local/po"
-S["exp_customhtmldir"]="/opt/rt3/local/html"
-S["customhtmldir"]="/opt/rt3/local/html"
-S["exp_customplugindir"]="/opt/rt3/local/plugins"
-S["customplugindir"]="/opt/rt3/local/plugins"
-S["exp_custometcdir"]="/opt/rt3/local/etc"
-S["custometcdir"]="/opt/rt3/local/etc"
-S["exp_customdir"]="/opt/rt3/local"
-S["customdir"]="/opt/rt3/local"
-S["exp_sessionstatedir"]="/opt/rt3/var/session_data"
-S["sessionstatedir"]="/opt/rt3/var/session_data"
-S["exp_masonstatedir"]="/usr/local/etc/freeside/masondata"
-S["masonstatedir"]="/usr/local/etc/freeside/masondata"
-S["exp_logfiledir"]="/opt/rt3/var/log"
-S["logfiledir"]="/opt/rt3/var/log"
-S["exp_localstatedir"]="/opt/rt3/var"
-S["exp_plugindir"]="/opt/rt3/plugins"
-S["plugindir"]="/opt/rt3/plugins"
-S["exp_manualdir"]="/opt/rt3/docs"
-S["manualdir"]="/opt/rt3/docs"
-S["exp_fontdir"]="/opt/rt3/share/fonts"
-S["fontdir"]="/opt/rt3/share/fonts"
-S["exp_htmldir"]="/var/www/freeside/rt"
-S["exp_datadir"]="/opt/rt3/share"
-S["exp_lexdir"]="/opt/rt3/share/po"
-S["lexdir"]="/opt/rt3/share/po"
-S["exp_libdir"]="/opt/rt3/lib"
-S["exp_mandir"]="/opt/rt3/man"
-S["exp_sysconfdir"]="/opt/rt3/etc"
-S["exp_sbindir"]="/opt/rt3/sbin"
-S["exp_bindir"]="/opt/rt3/bin"
-S["exp_exec_prefix"]="/opt/rt3"
-S["exp_prefix"]="/opt/rt3"
-S["WEB_HANDLER"]="modperl2"
-S["PERL"]="/usr/bin/perl"
-S["INSTALL_DATA"]="${INSTALL} -m 644"
-S["INSTALL_SCRIPT"]="${INSTALL}"
-S["INSTALL_PROGRAM"]="${INSTALL}"
-S["rt_version_patch"]="5"
-S["rt_version_minor"]="0"
-S["rt_version_major"]="4"
-S["CONFIGURE_INCANT"]="./configure --enable-layout=Freeside --with-db-type=Pg --with-db-dba=freeside --with-db-database=freeside --with-db-rt-user=freeside --with-db-rt-pa"\
-"ss= --with-web-user=freeside --with-web-group=freeside --with-rt-group=freeside --with-web-handler=modperl2"
-S["target_alias"]=""
-S["host_alias"]=""
-S["build_alias"]=""
-S["LIBS"]=""
-S["ECHO_T"]=""
-S["ECHO_N"]="-n"
-S["ECHO_C"]=""
-S["DEFS"]="-DPACKAGE_NAME=\\\"RT\\\" -DPACKAGE_TARNAME=\\\"rt\\\" -DPACKAGE_VERSION=\\\"rt-4.0.5\\\" -DPACKAGE_STRING=\\\"RT\\ rt-4.0.5\\\" -DPACKAGE_BUGREPORT=\\\"rt-bugs@bestpr"\
-"actical.com\\\" -DPACKAGE_URL=\\\"\\\""
-S["mandir"]="/opt/rt3/man"
-S["localedir"]="${datarootdir}/locale"
-S["libdir"]="/opt/rt3/lib"
-S["psdir"]="${docdir}"
-S["pdfdir"]="${docdir}"
-S["dvidir"]="${docdir}"
-S["htmldir"]="/var/www/freeside/rt"
-S["infodir"]="${datarootdir}/info"
-S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}"
-S["oldincludedir"]="/usr/include"
-S["includedir"]="${prefix}/include"
-S["localstatedir"]="/opt/rt3/var"
-S["sharedstatedir"]="${prefix}/com"
-S["sysconfdir"]="/opt/rt3/etc"
-S["datadir"]="/opt/rt3/share"
-S["datarootdir"]="${prefix}/share"
-S["libexecdir"]="${exec_prefix}/libexec"
-S["sbindir"]="/opt/rt3/sbin"
-S["bindir"]="/opt/rt3/bin"
-S["program_transform_name"]="s,x,x,"
-S["prefix"]="/opt/rt3"
-S["exec_prefix"]="/opt/rt3"
-S["PACKAGE_URL"]=""
-S["PACKAGE_BUGREPORT"]="rt-bugs@bestpractical.com"
-S["PACKAGE_STRING"]="RT rt-4.0.5"
-S["PACKAGE_VERSION"]="rt-4.0.5"
-S["PACKAGE_TARNAME"]="rt"
-S["PACKAGE_NAME"]="RT"
-S["PATH_SEPARATOR"]=":"
-S["SHELL"]="/bin/bash"
-_ACAWK
-cat >>"$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X " :F $CONFIG_FILES "
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- ac_datarootdir_hack='
- s&@datadir@&/opt/rt3/share&g
- s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
- s&@infodir@&${datarootdir}/info&g
- s&@localedir@&${datarootdir}/locale&g
- s&@mandir@&/opt/rt3/man&g
- s&\${datarootdir}&${prefix}/share&g' ;;
-esac
-ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
- esac
-
-
- case $ac_file$ac_mode in
- "etc/upgrade/3.8-branded-queues-extension":F) chmod ug+x $ac_file
- ;;
- "etc/upgrade/3.8-ical-extension":F) chmod ug+x $ac_file
- ;;
- "etc/upgrade/split-out-cf-categories":F) chmod ug+x $ac_file
- ;;
- "etc/upgrade/generate-rtaddressregexp":F) chmod ug+x $ac_file
- ;;
- "etc/upgrade/upgrade-articles":F) chmod ug+x $ac_file
- ;;
- "etc/upgrade/vulnerable-passwords":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-attributes-viewer":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-preferences-viewer":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-session-viewer":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-dump-metadata":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-setup-database":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-test-dependencies":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-email-digest":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-email-dashboards":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-clean-sessions":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-shredder":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-validator":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-email-group-admin":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-server":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-server.fcgi":F) chmod ug+x $ac_file
- ;;
- "sbin/standalone_httpd":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-setup-fulltext-index":F) chmod ug+x $ac_file
- ;;
- "sbin/rt-fulltext-indexer":F) chmod ug+x $ac_file
- ;;
- "bin/rt-crontool":F) chmod ug+x $ac_file
- ;;
- "bin/rt-mailgate":F) chmod ug+x $ac_file
- ;;
- "bin/rt":F) chmod ug+x $ac_file
- ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
+++ /dev/null
-#
-# RT was configured with:
-#
-# $ ./configure --enable-layout=Freeside --with-db-type=Pg --with-db-dba=freeside --with-db-database=freeside --with-db-rt-user=freeside --with-db-rt-pass= --with-web-user=freeside --with-web-group=freeside --with-rt-group=freeside --with-web-handler=modperl2
-#
-
-package RT;
-
-############################# WARNING #############################
-# #
-# NEVER EDIT RT_Config.pm ! #
-# #
-# Instead, copy any sections you want to change to #
-# RT_SiteConfig.pm and edit them there. Otherwise, #
-# your changes will be lost when you upgrade RT. #
-# #
-############################# WARNING #############################
-
-=head1 NAME
-
-RT::Config
-
-=head1 Base configuration
-
-=over 4
-
-=item C<$rtname>
-
-C<$rtname> is the string that RT will look for in mail messages to
-figure out what ticket a new piece of mail belongs to.
-
-Your domain name is recommended, so as not to pollute the namespace.
-Once you start using a given tag, you should probably never change it;
-otherwise, mail for existing tickets won't get put in the right place.
-
-=cut
-
-Set($rtname, "example.com");
-
-=item C<$Organization>
-
-You should set this to your organization's DNS domain. For example,
-I<fsck.com> or I<asylum.arkham.ma.us>. It is used by the linking
-interface to guarantee that ticket URIs are unique and easy to
-construct. Changing it after you have created tickets in the system
-will B<break> all existing ticket links!
-
-=cut
-
-Set($Organization, "example.com");
-
-=item C<$CorrespondAddress>, C<$CommentAddress>
-
-RT is designed such that any mail which already has a ticket-id
-associated with it will get to the right place automatically.
-
-C<$CorrespondAddress> and C<$CommentAddress> are the default addresses
-that will be listed in From: and Reply-To: headers of correspondence
-and comment mail tracked by RT, unless overridden by a queue-specific
-address. They should be set to email addresses which have been
-configured as aliases for F<rt-mailgate>.
-
-=cut
-
-Set($CorrespondAddress, '');
-
-Set($CommentAddress, '');
-
-=item C<$WebDomain>
-
-Domain name of the RT server, e.g. 'www.example.com'. It should not
-contain anything except the server name.
-
-=cut
-
-Set($WebDomain, "localhost");
-
-=item C<$WebPort>
-
-If we're running as a superuser, run on port 80. Otherwise, pick a
-high port for this user.
-
-443 is default port for https protocol.
-
-=cut
-
-Set($WebPort, 80);
-
-=item C<$WebPath>
-
-If you're putting the web UI somewhere other than at the root of your
-server, you should set C<$WebPath> to the path you'll be serving RT
-at.
-
-C<$WebPath> requires a leading / but no trailing /, or it can be
-blank.
-
-In most cases, you should leave C<$WebPath> set to "" (an empty
-value).
-
-=cut
-
-Set($WebPath, "");
-
-=item C<$Timezone>
-
-C<$Timezone> is the default timezone, used to convert times entered by
-users into GMT, as they are stored in the database, and back again;
-users can override this. It should be set to a timezone recognized by
-your server.
-
-=cut
-
-Set($Timezone, "US/Eastern");
-
-=item C<@Plugins>
-
-Set C<@Plugins> to a list of external RT plugins that should be
-enabled (those plugins have to be previously downloaded and
-installed).
-
-Example:
-
-C<Set(@Plugins, (qw(Extension::QuickDelete RT::Extension::CommandByMail)));>
-
-=cut
-
-Set(@Plugins, (qw(RTx::Calendar
- RT::Extension::MobileUI))); #RTx::Checklist ));
-
-=back
-
-
-
-
-=head1 Database connection
-
-=over 4
-
-=item C<$DatabaseType>
-
-Database driver being used; case matters. Valid types are "mysql",
-"Oracle" and "Pg".
-
-=cut
-
-Set($DatabaseType, "Pg");
-
-=item C<$DatabaseHost>, C<$DatabaseRTHost>
-
-The domain name of your database server. If you're running MySQL and
-on localhost, leave it blank for enhanced performance.
-
-C<DatabaseRTHost> is the fully-qualified hostname of your RT server,
-for use in granting ACL rights on MySQL.
-
-=cut
-
-Set($DatabaseHost, "localhost");
-Set($DatabaseRTHost, "localhost");
-
-=item C<$DatabasePort>
-
-The port that your database server is running on. Ignored unless it's
-a positive integer. It's usually safe to leave this blank; RT will
-choose the correct default.
-
-=cut
-
-Set($DatabasePort, "");
-
-=item C<$DatabaseUser>
-
-The name of the user to connect to the database as.
-
-=cut
-
-Set($DatabaseUser, "freeside");
-
-=item C<$DatabasePassword>
-
-The password the C<$DatabaseUser> should use to access the database.
-
-=cut
-
-Set($DatabasePassword, q{});
-
-=item C<$DatabaseName>
-
-The name of the RT database on your database server. For Oracle, the
-SID and database objects are created in C<$DatabaseUser>'s schema.
-
-=cut
-
-Set($DatabaseName, q{freeside});
-
-=item C<$DatabaseRequireSSL>
-
-If you're using PostgreSQL and have compiled in SSL support, set
-C<$DatabaseRequireSSL> to 1 to turn on SSL communication with the
-database.
-
-=cut
-
-Set($DatabaseRequireSSL, undef);
-
-=back
-
-
-
-
-=head1 Logging
-
-The default is to log anything except debugging information to syslog.
-Check the L<Log::Dispatch> POD for information about how to get things
-by syslog, mail or anything else, get debugging info in the log, etc.
-
-It might generally make sense to send error and higher by email to
-some administrator. If you do this, be careful that this email isn't
-sent to this RT instance. Mail loops will generate a critical log
-message.
-
-=over 4
-
-=item C<$LogToSyslog>, C<$LogToScreen>
-
-The minimum level error that will be logged to the specific device.
-From lowest to highest priority, the levels are:
-
- debug info notice warning error critical alert emergency
-
-Many syslogds are configured to discard or file debug messages away, so
-if you're attempting to debug RT you may need to reconfigure your
-syslogd or use one of the other logging options.
-
-Logging to your screen affects scripts run from the command line as well
-as the STDERR sent to your webserver (so these logs will usually show up
-in your web server's error logs).
-
-=cut
-
-Set($LogToSyslog, "info");
-Set($LogToScreen, "info");
-
-=item C<$LogToFile>, C<$LogDir>, C<$LogToFileNamed>
-
-Logging to a standalone file is also possible. The file needs to both
-exist and be writable by all direct users of the RT API. This generally
-includes the web server and whoever rt-crontool runs as. Note that
-rt-mailgate and the RT CLI go through the webserver, so their users do
-not need to have write permissions to this file. If you expect to have
-multiple users of the direct API, Best Practical recommends using syslog
-instead of direct file logging.
-
-You should set C<$LogToFile> to one of the levels documented above.
-
-=cut
-
-Set($LogToFile, undef);
-Set($LogDir, q{/opt/rt3/var/log});
-Set($LogToFileNamed, "rt.log"); #log to rt.log
-
-=item C<$LogStackTraces>
-
-If set to a log level then logging will include stack traces for
-messages with level equal to or greater than specified.
-
-NOTICE: Stack traces include parameters supplied to functions or
-methods. It is possible for stack trace logging to reveal sensitive
-information such as passwords or ticket content in your logs.
-
-=cut
-
-Set($LogStackTraces, "");
-
-=item C<@LogToSyslogConf>
-
-On Solaris or UnixWare, set to ( socket => 'inet' ). Options here
-override any other options RT passes to L<Log::Dispatch::Syslog>.
-Other interesting flags include facility and logopt. (See the
-L<Log::Dispatch::Syslog> documentation for more information.) (Maybe
-ident too, if you have multiple RT installations.)
-
-=cut
-
-Set(@LogToSyslogConf, ());
-
-=back
-
-
-
-=head1 Incoming mail gateway
-
-=over 4
-
-=item C<$EmailSubjectTagRegex>
-
-This regexp controls what subject tags RT recognizes as its own. If
-you're not dealing with historical C<$rtname> values, you'll likely
-never have to change this configuration.
-
-Be B<very careful> with it. Note that it overrides C<$rtname> for
-subject token matching and that you should use only "non-capturing"
-parenthesis grouping. For example:
-
-C<Set($EmailSubjectTagRegex, qr/(?:example.com|example.org)/i );>
-
-and NOT
-
-C<Set($EmailSubjectTagRegex, qr/(example.com|example.org)/i );>
-
-The setting below would make RT behave exactly as it does without the
-setting enabled.
-
-=cut
-
-# Set($EmailSubjectTagRegex, qr/\Q$rtname\E/i );
-
-=item C<$OwnerEmail>
-
-C<$OwnerEmail> is the address of a human who manages RT. RT will send
-errors generated by the mail gateway to this address. This address
-should I<not> be an address that's managed by your RT instance.
-
-=cut
-
-Set($OwnerEmail, 'root');
-
-=item C<$LoopsToRTOwner>
-
-If C<$LoopsToRTOwner> is defined, RT will send mail that it believes
-might be a loop to C<$OwnerEmail>.
-
-=cut
-
-Set($LoopsToRTOwner, 1);
-
-=item C<$StoreLoops>
-
-If C<$StoreLoops> is defined, RT will record messages that it believes
-to be part of mail loops. As it does this, it will try to be careful
-not to send mail to the sender of these messages.
-
-=cut
-
-Set($StoreLoops, undef);
-
-=item C<$MaxAttachmentSize>
-
-C<$MaxAttachmentSize> sets the maximum size (in bytes) of attachments
-stored in the database.
-
-For MySQL and Oracle, we set this size to 10 megabytes. If you're
-running a PostgreSQL version earlier than 7.1, you will need to drop
-this to 8192. (8k)
-
-=cut
-
-
-Set($MaxAttachmentSize, 10_000_000);
-
-=item C<$TruncateLongAttachments>
-
-If this is set to a non-undef value, RT will truncate attachments
-longer than C<$MaxAttachmentSize>.
-
-=cut
-
-Set($TruncateLongAttachments, undef);
-
-=item C<$DropLongAttachments>
-
-If this is set to a non-undef value, RT will silently drop attachments
-longer than C<MaxAttachmentSize>. C<$TruncateLongAttachments>, above,
-takes priority over this.
-
-=cut
-
-Set($DropLongAttachments, undef);
-
-=item C<$RTAddressRegexp>
-
-C<$RTAddressRegexp> is used to make sure RT doesn't add itself as a
-ticket CC if C<$ParseNewMessageForTicketCcs>, above, is enabled. It
-is important that you set this to a regular expression that matches
-all addresses used by your RT. This lets RT avoid sending mail to
-itself. It will also hide RT addresses from the list of "One-time Cc"
-and Bcc lists on ticket reply.
-
-If you have a number of addresses configured in your RT database
-already, you can generate a naive first pass regexp by using:
-
- perl etc/upgrade/generate-rtaddressregexp
-
-If left blank, RT will generate a regexp for you, based on your
-comment and correspond address settings on your queues; this comes at
-a small cost in start-up speed.
-
-=cut
-
-Set($RTAddressRegexp, undef);
-
-=item C<$IgnoreCcRegexp>
-
-C<$IgnoreCcRegexp> is a regexp to exclude addresses from automatic addition
-to the Cc list. Use this for addresses that are I<not> received by RT but
-are sometimes added to Cc lists by mistake. Unlike C<$RTAddressRegexp>,
-these addresses can still receive email from RT otherwise.
-
-=cut
-
-Set($IgnoreCcRegexp, undef);
-
-=item C<$CanonicalizeEmailAddressMatch>, C<$CanonicalizeEmailAddressReplace>
-
-RT provides functionality which allows the system to rewrite incoming
-email addresses. In its simplest form, you can substitute the value
-in C<CanonicalizeEmailAddressReplace> for the value in
-C<CanonicalizeEmailAddressMatch> (These values are passed to the
-C<CanonicalizeEmailAddress> subroutine in F<RT/User.pm>)
-
-By default, that routine performs a C<s/$Match/$Replace/gi> on any
-address passed to it.
-
-=cut
-
-# Set($CanonicalizeEmailAddressMatch, '@subdomain\.example\.com$');
-# Set($CanonicalizeEmailAddressReplace, '@example.com');
-
-=item C<$CanonicalizeOnCreate>
-
-Set this to 1 and the create new user page will use the values that
-you enter in the form but use the function CanonicalizeUserInfo in
-F<RT/User_Local.pm>
-
-=cut
-
-Set($CanonicalizeOnCreate, 0);
-
-=item C<$ValidateUserEmailAddresses>
-
-If C<$ValidateUserEmailAddresses> is 1, RT will refuse to create
-users with an invalid email address (as specified in RFC 2822) or with
-an email address made of multiple email addresses.
-
-=cut
-
-Set($ValidateUserEmailAddresses, undef);
-
-=item C<$NonCustomerEmailRegexp>
-
-Normally, when a ticket is linked to a customer, any requestors on that
-ticket that didn't previously have customer memberships are linked to
-the customer also. C<$NonCustomerEmailRegexp> is a regexp for email
-addresses that should I<not> automatically be linked to a customer in
-this way.
-
-=cut
-
-Set($NonCustomerEmailRegexp, undef);
-
-=item C<@MailPlugins>
-
-C<@MailPlugins> is a list of authentication plugins for
-L<RT::Interface::Email> to use; see L<rt-mailgate>
-
-=cut
-
-=item C<$UnsafeEmailCommands>
-
-C<$UnsafeEmailCommands>, if set to 1, enables 'take' and 'resolve'
-as possible actions via the mail gateway. As its name implies, this
-is very unsafe, as it allows email with a forged sender to possibly
-resolve arbitrary tickets!
-
-=cut
-
-=item C<$ExtractSubjectTagMatch>, C<$ExtractSubjectTagNoMatch>
-
-The default "extract remote tracking tags" scrip settings; these
-detect when your RT is talking to another RT, and adjust the subject
-accordingly.
-
-=cut
-
-Set($ExtractSubjectTagMatch, qr/\[.+? #\d+\]/);
-Set($ExtractSubjectTagNoMatch, ( ${RT::EmailSubjectTagRegex}
- ? qr/\[(?:${RT::EmailSubjectTagRegex}) #\d+\]/
- : qr/\[\Q$RT::rtname\E #\d+\]/));
-
-=back
-
-
-
-=head1 Outgoing mail
-
-=over 4
-
-=item C<$MailCommand>
-
-C<$MailCommand> defines which method RT will use to try to send mail.
-We know that 'sendmailpipe' works fairly well. If 'sendmailpipe'
-doesn't work well for you, try 'sendmail'. Other options are 'smtp'
-or 'qmail'.
-
-Note that you should remove the '-t' from C<$SendmailArguments> if you
-use 'sendmail' rather than 'sendmailpipe'
-
-For testing purposes, or to simply disable sending mail out into the
-world, you can set C<$MailCommand> to 'testfile' which writes all mail
-to a temporary file. RT will log the location of the temporary file
-so you can extract mail from it afterward.
-
-=cut
-
-Set($MailCommand, "sendmailpipe");
-
-=item C<$SetOutgoingMailFrom>
-
-C<$SetOutgoingMailFrom> tells RT to set the sender envelope to the
-Correspond mail address of the ticket's queue.
-
-Warning: If you use this setting, bounced mails will appear to be
-incoming mail to the system, thus creating new tickets.
-
-=cut
-
-Set($SetOutgoingMailFrom, 0);
-
-=item C<$OverrideOutgoingMailFrom>
-
-C<$OverrideOutgoingMailFrom> is used for overwriting the Correspond
-address of the queue as it is handed to sendmail -f. This helps force
-the From_ header away from www-data or other email addresses that show
-up in the "Sent by" line in Outlook.
-
-The option is a hash reference of queue name to email address. If
-there is no ticket involved, then the value of the C<Default> key will
-be used.
-
-This option is irrelevant unless C<$SetOutgoingMailFrom> is set.
-
-=cut
-
-Set($OverrideOutgoingMailFrom, {
-# 'Default' => 'admin@rt.example.com',
-# 'General' => 'general@rt.example.com',
-});
-
-=item C<$DefaultMailPrecedence>
-
-C<$DefaultMailPrecedence> is used to control the default Precedence
-level of outgoing mail where none is specified. By default it is
-C<bulk>, but if you only send mail to your staff, you may wish to
-change it.
-
-Note that you can set the precedence of individual templates by
-including an explicit Precedence header.
-
-If you set this value to C<undef> then we do not set a default
-Precedence header to outgoing mail. However, if there already is a
-Precedence header, it will be preserved.
-
-=cut
-
-Set($DefaultMailPrecedence, "bulk");
-
-=item C<$DefaultErrorMailPrecedence>
-
-C<$DefaultErrorMailPrecedence> is used to control the default
-Precedence level of outgoing mail that indicates some kind of error
-condition. By default it is C<bulk>, but if you only send mail to your
-staff, you may wish to change it.
-
-If you set this value to C<undef> then we do not add a Precedence
-header to error mail.
-
-=cut
-
-Set($DefaultErrorMailPrecedence, "bulk");
-
-=item C<$UseOriginatorHeader>
-
-C<$UseOriginatorHeader> is used to control the insertion of an
-RT-Originator Header in every outgoing mail, containing the mail
-address of the transaction creator.
-
-=cut
-
-Set($UseOriginatorHeader, 1);
-
-=item C<$UseFriendlyFromLine>
-
-By default, RT sets the outgoing mail's "From:" header to "SenderName
-via RT". Setting C<$UseFriendlyFromLine> to 0 disables it.
-
-=cut
-
-Set($UseFriendlyFromLine, 1);
-
-=item C<$FriendlyFromLineFormat>
-
-C<sprintf()> format of the friendly 'From:' header; its arguments are
-SenderName and SenderEmailAddress.
-
-=cut
-
-Set($FriendlyFromLineFormat, "\"%s via RT\" <%s>");
-
-=item C<$UseFriendlyToLine>
-
-RT can optionally set a "Friendly" 'To:' header when sending messages
-to Ccs or AdminCcs (rather than having a blank 'To:' header.
-
-This feature DOES NOT WORK WITH SENDMAIL[tm] BRAND SENDMAIL. If you
-are using sendmail, rather than postfix, qmail, exim or some other
-MTA, you _must_ disable this option.
-
-=cut
-
-Set($UseFriendlyToLine, 0);
-
-=item C<$FriendlyToLineFormat>
-
-C<sprintf()> format of the friendly 'To:' header; its arguments are
-WatcherType and TicketId.
-
-=cut
-
-Set($FriendlyToLineFormat, "\"%s of ". RT->Config->Get('rtname') ." Ticket #%s\":;");
-
-=item C<$NotifyActor>
-
-By default, RT doesn't notify the person who performs an update, as
-they already know what they've done. If you'd like to change this
-behavior, Set C<$NotifyActor> to 1
-
-=cut
-
-Set($NotifyActor, 0);
-
-=item C<$RecordOutgoingEmail>
-
-By default, RT records each message it sends out to its own internal
-database. To change this behavior, set C<$RecordOutgoingEmail> to 0
-
-=cut
-
-Set($RecordOutgoingEmail, 1);
-
-=item C<$VERPPrefix>, C<$VERPDomain>
-
-Setting these options enables VERP support
-L<http://cr.yp.to/proto/verp.txt>.
-
-Uncomment the following two directives to generate envelope senders
-of the form C<${VERPPrefix}${originaladdress}@${VERPDomain}>
-(i.e. rt-jesse=fsck.com@rt.example.com ).
-
-This currently only works with sendmail and sendmailpipe.
-
-=cut
-
-# Set($VERPPrefix, "rt-");
-# Set($VERPDomain, $RT::Organization);
-
-
-=item C<$ForwardFromUser>
-
-By default, RT forwards a message using queue's address and adds RT's
-tag into subject of the outgoing message, so recipients' replies go
-into RT as correspondents.
-
-To change this behavior, set C<$ForwardFromUser> to 1 and RT
-will use the address of the current user and remove RT's subject tag.
-
-=cut
-
-Set($ForwardFromUser, 0);
-
-=back
-
-=head2 Email dashboards
-
-=over 4
-
-=item C<$DashboardAddress>
-
-The email address from which RT will send dashboards. If none is set,
-then C<$OwnerEmail> will be used.
-
-=cut
-
-Set($DashboardAddress, '');
-
-=item C<$DashboardSubject>
-
-Lets you set the subject of dashboards. Arguments are the frequency (Daily,
-Weekly, Monthly) of the dashboard and the dashboard's name.
-
-=cut
-
-Set($DashboardSubject, "%s Dashboard: %s");
-
-=item C<@EmailDashboardRemove>
-
-A list of regular expressions that will be used to remove content from
-mailed dashboards.
-
-=cut
-
-Set(@EmailDashboardRemove, ());
-
-=back
-
-
-
-=head2 Sendmail configuration
-
-These options only take effect if C<$MailCommand> is 'sendmail' or
-'sendmailpipe'
-
-=over 4
-
-=item C<$SendmailArguments>
-
-C<$SendmailArguments> defines what flags to pass to C<$SendmailPath>
-If you picked 'sendmailpipe', you MUST add a -t flag to
-C<$SendmailArguments> These options are good for most sendmail
-wrappers and work-a-likes.
-
-These arguments are good for sendmail brand sendmail 8 and newer:
-C<Set($SendmailArguments,"-oi -t -ODeliveryMode=b -OErrorMode=m");>
-
-=cut
-
-Set($SendmailArguments, "-oi -t");
-
-
-=item C<$SendmailBounceArguments>
-
-C<$SendmailBounceArguments> defines what flags to pass to C<$Sendmail>
-assuming RT needs to send an error (i.e. bounce).
-
-=cut
-
-Set($SendmailBounceArguments, '-f "<>"');
-
-=item C<$SendmailPath>
-
-If you selected 'sendmailpipe' above, you MUST specify the path to
-your sendmail binary in C<$SendmailPath>.
-
-=cut
-
-Set($SendmailPath, "/usr/sbin/sendmail");
-
-
-=back
-
-=head2 SMTP configuration
-
-These options only take effect if C<$MailCommand> is 'smtp'
-
-=over 4
-
-=item C<$SMTPServer>
-
-C<$SMTPServer> should be set to the hostname of the SMTP server to use
-
-=cut
-
-Set($SMTPServer, undef);
-
-=item C<$SMTPFrom>
-
-C<$SMTPFrom> should be set to the 'From' address to use, if not the
-email's 'From'
-
-=cut
-
-Set($SMTPFrom, undef);
-
-=item C<$SMTPDebug>
-
-C<$SMTPDebug> should be set to 1 to debug SMTP mail sending
-
-=cut
-
-Set($SMTPDebug, 0);
-
-=back
-
-=head2 Other mailers
-
-=over 4
-
-=item C<@MailParams>
-
-C<@MailParams> defines a list of options passed to $MailCommand if it
-is not 'sendmailpipe', 'sendmail', or 'smtp'
-
-=cut
-
-Set(@MailParams, ());
-
-=back
-
-
-=head1 Web interface
-
-=over 4
-
-=item C<$WebDefaultStylesheet>
-
-This determines the default stylesheet the RT web interface will use.
-RT ships with several themes by default:
-
- web2 The default layout for RT 3.8
- aileron The default layout for RT 4.0
- ballard Theme which doesn't rely on JavaScript for menuing
-
-This bundled distibution of RT also includes:
- freeside3 Integration with Freeside (enabled by default)
- freeside2.1 Previous Freeside theme
-
-This value actually specifies a directory in F<share/html/NoAuth/css/>
-from which RT will try to load the file main.css (which should @import
-any other files the stylesheet needs). This allows you to easily and
-cleanly create your own stylesheets to apply to RT. This option can
-be overridden by users in their preferences.
-
-=cut
-
-Set($WebDefaultStylesheet, "freeside3");
-
-=item C<$DefaultQueue>
-
-Use this to select the default queue name that will be used for
-creating new tickets. You may use either the queue's name or its
-ID. This only affects the queue selection boxes on the web interface.
-
-=cut
-
-# Set($DefaultQueue, "General");
-
-=item C<$RememberDefaultQueue>
-
-When a queue is selected in the new ticket dropdown, make it the new
-default for the new ticket dropdown.
-
-=cut
-
-# Set($RememberDefaultQueue, 1);
-
-=item C<$EnableReminders>
-
-Hide all links and portlets related to Reminders by setting this to 0
-
-=cut
-
-Set($EnableReminders, 1);
-
-=item C<@CustomFieldValuesSources>
-
-Set C<@CustomFieldValuesSources> to a list of class names which extend
-L<RT::CustomFieldValues::External>. This can be used to pull lists of
-custom field values from external sources at runtime.
-
-=cut
-
-Set(@CustomFieldValuesSources, ('RT::CustomFieldValues::Queues'));
-
-=item C<$CanonicalizeRedirectURLs>
-
-Set C<$CanonicalizeRedirectURLs> to 1 to use C<$WebURL> when
-redirecting rather than the one we get from C<%ENV>.
-
-Apache's UseCanonicalName directive changes the hostname that RT
-finds in C<%ENV>. You can read more about what turning it On or Off
-means in the documentation for your version of Apache.
-
-If you use RT behind a reverse proxy, you almost certainly want to
-enable this option.
-
-=cut
-
-Set($CanonicalizeRedirectURLs, 0);
-
-=item C<@JSFiles>
-
-A list of JavaScript files to be included in head. Removing any of
-the default entries is not suggested.
-
-=cut
-
-Set(@JSFiles, qw/
- jquery-1.4.2.min.js
- jquery_noconflict.js
- jquery-ui-1.8.4.custom.min.js
- jquery-ui-patch-datepicker.js
- ui.timepickr.js
- titlebox-state.js
- util.js
- userautocomplete.js
- jquery.event.hover-1.0.js
- superfish.js
- supersubs.js
- jquery.supposition.js
- history-folding.js
- late.js
-/);
-
-=item C<$JSMinPath>
-
-Path to the jsmin binary; if specified, it will be used to minify
-C<JSFiles>. The default, and the fallback if the binary cannot be
-found, is to simply concatenate the files.
-
-jsmin can be installed by running 'make jsmin' from the RT install
-directory, or from http://www.crockford.com/javascript/jsmin.html
-
-=cut
-
-# Set($JSMinPath, "/path/to/jsmin");
-
-=item C<@CSSFiles>
-
-A list of additional CSS files to be included in head.
-
-=cut
-
-Set(@CSSFiles, qw//);
-
-=item C<$UsernameFormat>
-
-This determines how user info is displayed. 'concise' will show one of
-either NickName, RealName, Name or EmailAddress, depending on what
-exists and whether the user is privileged or not. 'verbose' will show
-RealName and EmailAddress.
-
-=cut
-
-Set($UsernameFormat, "verbose");
-
-=item C<$WebBaseURL>, C<$WebURL>
-
-Usually you don't want to set these options. The only obvious reason
-is if RT is accessible via https protocol on a non standard port, e.g.
-'https://rt.example.com:9999'. In all other cases these options are
-computed using C<$WebDomain>, C<$WebPort> and C<$WebPath>.
-
-C<$WebBaseURL> is the scheme, server and port
-(e.g. 'http://rt.example.com') for constructing URLs to the web
-UI. C<$WebBaseURL> doesn't need a trailing /.
-
-C<$WebURL> is the C<$WebBaseURL>, C<$WebPath> and trailing /, for
-example: 'http://www.example.com/rt/'.
-
-=cut
-
-my $port = RT->Config->Get('WebPort');
-Set($WebBaseURL,
- ($port == 443? 'https': 'http') .'://'
- . RT->Config->Get('WebDomain')
- . ($port != 80 && $port != 443? ":$port" : '')
-);
-
-Set($WebURL, RT->Config->Get('WebBaseURL') . RT->Config->Get('WebPath') . "/");
-
-=item C<$WebImagesURL>
-
-C<$WebImagesURL> points to the base URL where RT can find its images.
-Define the directory name to be used for images in RT web documents.
-
-=cut
-
-Set($WebImagesURL, RT->Config->Get('WebPath') . "/NoAuth/images/");
-
-=item C<$LogoURL>
-
-C<$LogoURL> points to the URL of the RT logo displayed in the web UI.
-This can also be configured via the web UI.
-
-=cut
-
-Set($LogoURL, RT->Config->Get('WebImagesURL') . "bpslogo.png");
-
-=item C<$LogoLinkURL>
-
-C<$LogoLinkURL> is the URL that the RT logo hyperlinks to.
-
-=cut
-
-Set($LogoLinkURL, "http://bestpractical.com");
-
-=item C<$LogoAltText>
-
-C<$LogoAltText> is a string of text for the alt-text of the logo. It
-will be passed through C<loc> for localization.
-
-=cut
-
-Set($LogoAltText, "Best Practical Solutions, LLC corporate logo");
-
-=item C<$LogoImageHeight>
-
-C<$LogoImageHeight> is the value of the C<height> attribute of the logo
-C<img> tag.
-
-=cut
-
-Set($LogoImageHeight, 38);
-
-=item C<$LogoImageWidth>
-
-C<$LogoImageWidth> is the value of the C<width> attribute of the logo
-C<img> tag.
-
-=cut
-
-Set($LogoImageWidth, 181);
-
-=item C<$WebNoAuthRegex>
-
-What portion of RT's URL space should not require authentication. The
-default is almost certainly correct, and should only be changed if you
-are extending RT.
-
-=cut
-
-Set($WebNoAuthRegex, qr{^ /rt (?:/+NoAuth/ | /+REST/\d+\.\d+/NoAuth/) }x );
-
-=item C<$SelfServiceRegex>
-
-What portion of RT's URLspace should be accessible to Unprivileged
-users This does not override the redirect from F</Ticket/Display.html>
-to F</SelfService/Display.html> when Unprivileged users attempt to
-access ticked displays.
-
-=cut
-
-Set($SelfServiceRegex, qr!^(?:/+SelfService/)!x );
-
-=item C<$WebFlushDbCacheEveryRequest>
-
-By default, RT clears its database cache after every page view. This
-ensures that you've always got the most current information when
-working in a multi-process (mod_perl or FastCGI) Environment. Setting
-C<$WebFlushDbCacheEveryRequest> to 0 will turn this off, which will
-speed RT up a bit, at the expense of a tiny bit of data accuracy.
-
-=cut
-
-Set($WebFlushDbCacheEveryRequest, 1);
-
-=item C<%ChartFont>
-
-The L<GD> module (which RT uses for graphs) ships with a built-in font
-that doesn't have full Unicode support. You can use a given TrueType
-font for a specific language by setting %ChartFont to (language =E<gt>
-the absolute path of a font) pairs. Your GD library must have support
-for TrueType fonts to use this option. If there is no entry for a
-language in the hash then font with 'others' key is used.
-
-RT comes with two TrueType fonts covering most available languages.
-
-=cut
-
-Set(
- %ChartFont,
- 'zh-cn' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
- 'zh-tw' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
- 'ja' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
- 'others' => "$RT::BasePath/share/fonts/DroidSans.ttf",
-);
-
-=item C<$ChartsTimezonesInDB>
-
-RT stores dates using the UTC timezone in the DB, so charts grouped by
-dates and time are not representative. Set C<$ChartsTimezonesInDB> to 1
-to enable timezone conversions using your DB's capabilities. You may
-need to do some work on the DB side to use this feature, read more in
-F<docs/customizing/timezones_in_charts.pod>.
-
-At this time, this feature only applies to MySQL and PostgreSQL.
-
-=cut
-
-Set($ChartsTimezonesInDB, 0);
-
-=back
-
-
-
-=head2 Home page
-
-=over 4
-
-=item C<$DefaultSummaryRows>
-
-C<$DefaultSummaryRows> is default number of rows displayed in for
-search results on the front page.
-
-=cut
-
-Set($DefaultSummaryRows, 10);
-
-=item C<$HomePageRefreshInterval>
-
-C<$HomePageRefreshInterval> is default number of seconds to refresh
-the RT home page. Choose from [0, 120, 300, 600, 1200, 3600, 7200].
-
-=cut
-
-Set($HomePageRefreshInterval, 0);
-
-=item C<$HomepageComponents>
-
-C<$HomepageComponents> is an arrayref of allowed components on a
-user's customized homepage ("RT at a glance").
-
-=cut
-
-Set($HomepageComponents, [qw(QuickCreate Quicksearch MyCalendar MyAdminQueues MySupportQueues MyReminders RefreshHomepage Dashboards SavedSearches)]);
-
-=back
-
-
-
-
-=head2 Ticket search
-
-=over 4
-
-=item C<$UseSQLForACLChecks>
-
-Historically, ACLs were checked on display, which could lead to empty
-search pages and wrong ticket counts. Set C<$UseSQLForACLChecks> to 1
-to limit search results in SQL instead, which eliminates these
-problems.
-
-This option is still relatively new; it may result in performance
-problems in some cases, or significant speedups in others.
-
-=cut
-
-Set($UseSQLForACLChecks, undef);
-
-=item C<$TicketsItemMapSize>
-
-On the display page of a ticket from search results, RT provides links
-to the first, next, previous and last ticket from the results. In
-order to build these links, RT needs to fetch the full result set from
-the database, which can be resource-intensive.
-
-Set C<$TicketsItemMapSize> to number of tickets you want RT to examine
-to build these links. If the full result set is larger than this
-number, RT will omit the "last" link in the menu. Set this to zero to
-always examine all results.
-
-=cut
-
-Set($TicketsItemMapSize, 1000);
-
-=item C<$SearchResultsRefreshInterval>
-
-C<$SearchResultsRefreshInterval> is default number of seconds to
-refresh search results in RT. Choose from [0, 120, 300, 600, 1200,
-3600, 7200].
-
-=cut
-
-Set($SearchResultsRefreshInterval, 0);
-
-=item C<$DefaultSearchResultFormat>
-
-C<$DefaultSearchResultFormat> is the default format for RT search
-results
-
-=cut
-
-Set ($DefaultSearchResultFormat, qq{
- '<B><A HREF="__WebPath__/Ticket/Display.html?id=__id__">__id__</a></B>/TITLE:#',
- '<B><A HREF="__WebPath__/Ticket/Display.html?id=__id__">__Subject__</a></B>/TITLE:Subject',
- Customer,
- Status,
- QueueName,
- OwnerName,
- Priority,
- '__NEWLINE__',
- '',
- '<small>__Requestors__</small>',
- '<small>__CustomerTags__</small>',
- '<small>__CreatedRelative__</small>',
- '<small>__ToldRelative__</small>',
- '<small>__LastUpdatedRelative__</small>',
- '<small>__TimeLeft__</small>'});
-
-=item C<$DefaultSelfServiceSearchResultFormat>
-
-C<$DefaultSelfServiceSearchResultFormat> is the default format of
-searches displayed in the SelfService interface.
-
-=cut
-
-Set($DefaultSelfServiceSearchResultFormat, qq{
- '<B><A HREF="__WebPath__/SelfService/Display.html?id=__id__">__id__</a></B>/TITLE:#',
- '<B><A HREF="__WebPath__/SelfService/Display.html?id=__id__">__Subject__</a></B>/TITLE:Subject',
- Status,
- Requestors,
- OwnerName});
-
-=item C<%FullTextSearch>
-
-Full text search (FTS) without database indexing is a very slow
-operation, and is thus disabled by default.
-
-Before setting C<Indexed> to 1, read F<docs/full_text_indexing.pod> for
-the full details of FTS on your particular database.
-
-It is possible to enable FTS without database indexing support, simply
-by setting the C<Enable> key to 1, while leaving C<Indexed> set to 0.
-This is not generally suggested, as unindexed full-text searching can
-cause severe performance problems.
-
-=cut
-
-Set(%FullTextSearch,
- Enable => 0,
- Indexed => 0,
-);
-
-
-=item C<$OnlySearchActiveTicketsInSimpleSearch>
-
-When query in simple search doesn't have status info, use this to only
-search active ones.
-
-=cut
-
-Set($OnlySearchActiveTicketsInSimpleSearch, 1);
-
-=item C<$SearchResultsAutoRedirect>
-
-When only one ticket is found in search, use this to redirect to the
-ticket display page automatically.
-
-=cut
-
-Set($SearchResultsAutoRedirect, 0);
-
-=back
-
-
-
-=head2 Ticket display
-
-=over 4
-
-=item C<$ShowMoreAboutPrivilegedUsers>
-
-This determines if the 'More about requestor' box on
-Ticket/Display.html is shown for Privileged Users.
-
-=cut
-
-Set($ShowMoreAboutPrivilegedUsers, 0);
-
-=item C<$MoreAboutRequestorTicketList>
-
-This can be set to Active, Inactive, All or None. It controls what
-ticket list will be displayed in the 'More about requestor' box on
-Ticket/Display.html. This option can be controlled by users also.
-
-=cut
-
-Set($MoreAboutRequestorTicketList, "Active");
-
-=item C<$MoreAboutRequestorExtraInfo>
-
-By default, the 'More about requestor' box on Ticket/Display.html
-shows the Requestor's name and ticket list. If you would like to see
-extra information about the user, this expects a Format string of user
-attributes. Please note that not all the attributes are supported in
-this display because we're not building a table.
-
-Example:
-C<Set($MoreAboutRequestorExtraInfo,"Organization, Address1")>
-
-=cut
-
-Set($MoreAboutRequestorExtraInfo, "");
-
-=item C<$MoreAboutRequestorGroupsLimit>
-
-By default, the 'More about requestor' box on Ticket/Display.html
-shows all the groups of the Requestor. Use this to limit the number
-of groups; a value of undef removes the group display entirely.
-
-=cut
-
-Set($MoreAboutRequestorGroupsLimit, 0);
-
-=item C<$UseSideBySideLayout>
-
-Should the ticket create and update forms use a more space efficient
-two column layout. This layout may not work in narrow browsers if you
-set a MessageBoxWidth (below).
-
-=cut
-
-Set($UseSideBySideLayout, 1);
-
-=item C<$EditCustomFieldsSingleColumn>
-
-When displaying a list of Ticket Custom Fields for editing, RT
-defaults to a 2 column list. If you set this to 1, it will instead
-display the Custom Fields in a single column.
-
-=cut
-
-Set($EditCustomFieldsSingleColumn, 0);
-
-=item C<$ShowUnreadMessageNotifications>
-
-If set to 1, RT will prompt users when there are new,
-unread messages on tickets they are viewing.
-
-=cut
-
-Set($ShowUnreadMessageNotifications, 0);
-
-=item C<$AutocompleteOwners>
-
-If set to 1, the owner drop-downs for ticket update/modify and the query
-builder are replaced by text fields that autocomplete. This can
-alleviate the sometimes huge owner list for installations where many
-users have the OwnTicket right.
-
-=cut
-
-Set($AutocompleteOwners, 0);
-
-=item C<$AutocompleteOwnersForSearch>
-
-If set to 1, the owner drop-downs for the query builder are always
-replaced by text field that autocomplete and C<$AutocompleteOwners>
-is ignored. Helpful when owners list is huge in the query builder.
-
-=cut
-
-Set($AutocompleteOwnersForSearch, 0);
-
-=item C<$UserAutocompleteFields>
-
-Specifies which fields of L<RT::User> to match against and how to
-match each field when autocompleting users. Valid match methods are
-LIKE, STARTSWITH, ENDSWITH, =, and !=.
-
-=cut
-
-Set($UserAutocompleteFields, {
- EmailAddress => 'STARTSWITH',
- Name => 'STARTSWITH',
- RealName => 'LIKE',
-});
-
-=item C<$AllowUserAutocompleteForUnprivileged>
-
-Should unprivileged users be allowed to autocomplete users. Setting
-this option to 1 means unprivileged users will be able to search all
-your users.
-
-=cut
-
-Set($AllowUserAutocompleteForUnprivileged, 0);
-
-=item C<$DisplayTicketAfterQuickCreate>
-
-Enable this to redirect to the created ticket display page
-automatically when using QuickCreate.
-
-=cut
-
-Set($DisplayTicketAfterQuickCreate, 0);
-
-=item C<$WikiImplicitLinks>
-
-Support implicit links in WikiText custom fields? Setting this to 1
-causes InterCapped or ALLCAPS words in WikiText fields to automatically
-become links to searches for those words. If used on Articles, it links
-to the Article with that name.
-
-=cut
-
-Set($WikiImplicitLinks, 0);
-
-=item C<$PreviewScripMessages>
-
-Set C<$PreviewScripMessages> to 1 if the scrips preview on the ticket
-reply page should include the content of the messages to be sent.
-
-=cut
-
-Set($PreviewScripMessages, 0);
-
-=item C<$SimplifiedRecipients>
-
-If C<$SimplifiedRecipients> is set, a simple list of who will receive
-B<any> kind of mail will be shown on the ticket reply page, instead of a
-detailed breakdown by scrip.
-
-=cut
-
-Set($SimplifiedRecipients, 0);
-
-=item C<$HideResolveActionsWithDependencies>
-
-If set to 1, this option will skip ticket menu actions which can't be
-completed successfully because of outstanding active Depends On tickets.
-
-By default, all ticket actions are displayed in the menu even if some of
-them can't be successful until all Depends On links are resolved or
-transitioned to another inactive status.
-
-=cut
-
-Set($HideResolveActionsWithDependencies, 0);
-
-=back
-
-
-
-=head2 Articles
-
-=over 4
-
-=item C<$ArticleOnTicketCreate>
-
-Set this to 1 to display the Articles interface on the Ticket Create
-page in addition to the Reply/Comment page.
-
-=cut
-
-Set($ArticleOnTicketCreate, 0);
-
-=item C<$HideArticleSearchOnReplyCreate>
-
-Set this to 1 to hide the search and include boxes from the Article
-UI. This assumes you have enabled Article Hotlist feature, otherwise
-you will have no access to Articles.
-
-=cut
-
-Set($HideArticleSearchOnReplyCreate, 0);
-
-=back
-
-
-
-=head2 Message box properties
-
-=over 4
-
-=item C<$MessageBoxWidth>, C<$MessageBoxHeight>
-
-For message boxes, set the entry box width, height and what type of
-wrapping to use. These options can be overridden by users in their
-preferences.
-
-When the width is set to undef, no column count is specified and the
-message box will take up 100% of the available width. Combining this
-with HARD messagebox wrapping (below) is not recommended, as it will
-lead to inconsistent width in transactions between browsers.
-
-These settings only apply to the non-RichText message box. See below
-for Rich Text settings.
-
-=cut
-
-Set($MessageBoxWidth, undef);
-Set($MessageBoxHeight, 15);
-
-=item C<$MessageBoxWrap>
-
-Wrapping is disabled when using MessageBoxRichText because of a bad
-interaction between IE and wrapping with the Rich Text Editor.
-
-=cut
-
-Set($MessageBoxWrap, "SOFT");
-
-=item C<$MessageBoxRichText>
-
-Should "rich text" editing be enabled? This option lets your users
-send HTML email messages from the web interface.
-
-=cut
-
-Set($MessageBoxRichText, 1);
-
-=item C<$MessageBoxRichTextHeight>
-
-Height of rich text JavaScript enabled editing boxes (in pixels)
-
-=cut
-
-Set($MessageBoxRichTextHeight, 200);
-
-=item C<$MessageBoxIncludeSignature>
-
-Should your users' signatures (from their Preferences page) be
-included in Comments and Replies.
-
-=cut
-
-Set($MessageBoxIncludeSignature, 1);
-
-=item C<$MessageBoxIncludeSignatureOnComment>
-
-Should your users' signatures (from their Preferences page) be
-included in Comments. Setting this to false overrides
-C<$MessageBoxIncludeSignature>.
-
-=cut
-
-Set($MessageBoxIncludeSignatureOnComment, 1);
-
-=back
-
-
-=head2 Transaction display
-
-=over 4
-
-=item C<$OldestTransactionsFirst>
-
-By default, RT shows newest transactions at the bottom of the ticket
-history page, if you want see them at the top set this to 0. This
-option can be overridden by users in their preferences.
-
-=cut
-
-Set($OldestTransactionsFirst, 1);
-
-=item C<$DeferTransactionLoading>
-
-When set, defers loading ticket history until the user clicks a link.
-This should end up serving pages to users quicker, since generating
-all the HTML for transaction history can be slow for long tickets.
-
-=cut
-
-# Set($DeferTransactionLoading, 1);
-
-=item C<$ShowBccHeader>
-
-By default, RT hides from the web UI information about blind copies
-user sent on reply or comment.
-
-=cut
-
-Set($ShowBccHeader, 0);
-
-=item C<$TrustHTMLAttachments>
-
-If C<TrustHTMLAttachments> is not defined, we will display them as
-text. This prevents malicious HTML and JavaScript from being sent in a
-request (although there is probably more to it than that)
-
-=cut
-
-Set($TrustHTMLAttachments, undef);
-
-=item C<$AlwaysDownloadAttachments>
-
-Always download attachments, regardless of content type. If set, this
-overrides C<TrustHTMLAttachments>.
-
-=cut
-
-Set($AlwaysDownloadAttachments, undef);
-
-=item C<$AttachmentUnits>
-
-Controls the units (kilobytes or bytes) that attachment sizes use for
-display. The default is to display kilobytes if the attachment is
-larger than 1024 bytes, bytes otherwise. If you set
-C<$AttachmentUnits> to C<'k'> then attachment sizes will always be
-displayed in kilobytes. If set to C<'b'>, then sizes will be bytes.
-
-=cut
-
-Set($AttachmentUnits, undef);
-
-=item C<$PreferRichText>
-
-If C<$PreferRichText> is set to 1, RT will show HTML/Rich text messages
-in preference to their plain-text alternatives. RT "scrubs" the HTML to
-show only a minimal subset of HTML to avoid possible contamination by
-cross-site-scripting attacks.
-
-=cut
-
-Set($PreferRichText, undef);
-
-=item C<$MaxInlineBody>
-
-C<$MaxInlineBody> is the maximum attachment size that we want to see
-inline when viewing a transaction. RT will inline any text if the
-value is undefined or 0. This option can be overridden by users in
-their preferences.
-
-=cut
-
-Set($MaxInlineBody, 12000);
-
-=item C<$ShowTransactionImages>
-
-By default, RT shows images attached to incoming (and outgoing) ticket
-updates inline. Set this variable to 0 if you'd like to disable that
-behavior.
-
-=cut
-
-Set($ShowTransactionImages, 1);
-
-=item C<$PlainTextPre>
-
-Normally plaintext attachments are displayed as HTML with line breaks
-preserved. This causes space- and tab-based formatting not to be
-displayed correctly. By setting $PlainTextPre messages will be
-displayed using <pre>.
-
-=cut
-
-Set($PlainTextPre, 0);
-
-
-=item C<$PlainTextMono>
-
-Set C<$PlainTextMono> to 1 to use monospaced font and preserve
-formatting; unlike C<$PlainTextPre>, the text will wrap to fit width
-of the browser window; this option overrides C<$PlainTextPre>.
-
-=cut
-
-Set($PlainTextMono, 0);
-
-=item C<$SuppressInlineTextFiles>
-
-If C<$SuppressInlineTextFiles> is set to 1, then uploaded text files
-(text-type attachments with file names) are prevented from being
-displayed in-line when viewing a ticket's history.
-
-=cut
-
-Set($SuppressInlineTextFiles, undef);
-
-
-=item C<@Active_MakeClicky>
-
-MakeClicky detects various formats of data in headers and email
-messages, and extends them with supporting links. By default, RT
-provides two formats:
-
-* 'httpurl': detects http:// and https:// URLs and adds '[Open URL]'
- link after the URL.
-
-* 'httpurl_overwrite': also detects URLs as 'httpurl' format, but
- replaces the URL with a link.
-
-See F<share/html/Elements/MakeClicky> for documentation on how to add
-your own styles of link detection.
-
-=cut
-
-Set(@Active_MakeClicky, qw());
-
-=back
-
-
-
-=head1 Application logic
-
-=over 4
-
-=item C<$ParseNewMessageForTicketCcs>
-
-If C<$ParseNewMessageForTicketCcs> is set to 1, RT will attempt to
-divine Ticket 'Cc' watchers from the To and Cc lines of incoming
-messages. Be forewarned that if you have I<any> addresses which forward
-mail to RT automatically and you enable this option without modifying
-C<$RTAddressRegexp> below, you will get yourself into a heap of trouble.
-
-=cut
-
-Set($ParseNewMessageForTicketCcs, undef);
-
-=item C<$UseTransactionBatch>
-
-Set C<$UseTransactionBatch> to 1 to execute transactions in batches,
-such that a resolve and comment (for example) would happen
-simultaneously, instead of as two transactions, unaware of each
-others' existence.
-
-=cut
-
-Set($UseTransactionBatch, 1);
-
-=item C<$StrictLinkACL>
-
-When this feature is enabled a user needs I<ModifyTicket> rights on
-both tickets to link them together; otherwise, I<ModifyTicket> rights
-on either of them is sufficient.
-
-=cut
-
-Set($StrictLinkACL, 1);
-
-=item C<$RedistributeAutoGeneratedMessages>
-
-Should RT redistribute correspondence that it identifies as machine
-generated? A 1 will do so; setting this to 0 will cause no
-such messages to be redistributed. You can also use 'privileged' (the
-default), which will redistribute only to privileged users. This helps
-to protect against malformed bounces and loops caused by auto-created
-requestors with bogus addresses.
-
-=cut
-
-Set($RedistributeAutoGeneratedMessages, "privileged");
-
-=item C<$ApprovalRejectionNotes>
-
-Should rejection notes from approvals be sent to the requestors?
-
-=cut
-
-Set($ApprovalRejectionNotes, 1);
-
-=item C<$ForceApprovalsView>
-
-Should approval tickets only be viewed and modified through the standard
-approval interface? Changing this setting to 1 will redirect any attempt to
-use the normal ticket display and modify page for approval tickets.
-
-For example, with this option set to 1 and an approval ticket #123:
-
- /Ticket/Display.html?id=123
-
-is redirected to
-
- /Approval/Display.html?id=123
-
-=back
-
-=cut
-
-Set($ForceApprovalsView, 0);
-
-=head1 Extra security
-
-=over 4
-
-This is a list of extra security measures to enable that help keep your RT
-safe. If you don't know what these mean, you should almost certainly leave the
-defaults alone.
-
-=item C<$DisallowExecuteCode>
-
-If set to a true value, the C<ExecuteCode> right will be removed from
-all users, B<including> the superuser. This is intended for when RT is
-installed into a shared environment where even the superuser should not
-be allowed to run arbitrary Perl code on the server via scrips.
-
-=cut
-
-Set($DisallowExecuteCode, 0);
-
-=item C<$Framebusting>
-
-If set to a false value, framekiller javascript will be disabled and the
-X-Frame-Options: DENY header will be suppressed from all responses.
-This disables RT's clickjacking protection.
-
-=cut
-
-Set($Framebusting, 1);
-
-=back
-
-=head1 Authorization and user configuration
-
-=over 4
-
-=item C<$WebExternalAuth>
-
-If C<$WebExternalAuth> is defined, RT will defer to the environment's
-REMOTE_USER variable.
-
-=cut
-
-Set($WebExternalAuth, undef);
-
-=item C<$WebExternalAuthContinuous>
-
-If C<$WebExternalAuthContinuous> is defined, RT will check for the
-REMOTE_USER on each access. If you would prefer this to only happen
-once (at initial login) set this to a false value. The default
-setting will help ensure that if your external authentication system
-deauthenticates a user, RT notices as soon as possible.
-
-=cut
-
-Set($WebExternalAuthContinuous, 1);
-
-=item C<$WebFallbackToInternalAuth>
-
-If C<$WebFallbackToInternalAuth> is defined, the user is allowed a
-chance of fallback to the login screen, even if REMOTE_USER failed.
-
-=cut
-
-Set($WebFallbackToInternalAuth, undef);
-
-=item C<$WebExternalGecos>
-
-C<$WebExternalGecos> means to match 'gecos' field as the user
-identity); useful with mod_auth_pwcheck and IIS Integrated Windows
-logon.
-
-=cut
-
-Set($WebExternalGecos, undef);
-
-=item C<$WebExternalAuto>
-
-C<$WebExternalAuto> will create users under the same name as
-REMOTE_USER upon login, if it's missing in the Users table.
-
-=cut
-
-Set($WebExternalAuto, undef);
-
-=item C<$AutoCreate>
-
-If C<$WebExternalAuto> is set to 1, C<$AutoCreate> will be passed to
-User's Create method. Use it to set defaults, such as creating
-Unprivileged users with C<{ Privileged => 0 }> This must be a hashref.
-
-=cut
-
-Set($AutoCreate, undef);
-
-=item C<$WebSessionClass>
-
-C<$WebSessionClass> is the class you wish to use for managing
-Sessions. It defaults to use your SQL database, but if you are using
-MySQL 3.x and plans to use non-ascii Queue names, uncomment and add
-this line to F<RT_SiteConfig.pm> to prevent session corruption.
-
-=cut
-
-# Set($WebSessionClass, "Apache::Session::File");
-
-=item C<$AutoLogoff>
-
-By default, RT's user sessions persist until a user closes his or her
-browser. With the C<$AutoLogoff> option you can setup session lifetime
-in minutes. A user will be logged out if he or she doesn't send any
-requests to RT for the defined time.
-
-=cut
-
-Set($AutoLogoff, 0);
-
-=item C<$LogoutRefresh>
-
-The number of seconds to wait after logout before sending the user to
-the login page. By default, 1 second, though you may want to increase
-this if you display additional information on the logout page.
-
-=cut
-
-Set($LogoutRefresh, 1);
-
-=item C<$WebSecureCookies>
-
-By default, RT's session cookie isn't marked as "secure". Some web
-browsers will treat secure cookies more carefully than non-secure
-ones, being careful not to write them to disk, only sending them over
-an SSL secured connection, and so on. To enable this behavior, set
-C<$WebSecureCookies> to 1. NOTE: You probably don't want to turn this
-on I<unless> users are only connecting via SSL encrypted HTTPS
-connections.
-
-=cut
-
-Set($WebSecureCookies, 0);
-
-=item C<$WebHttpOnlyCookies>
-
-Default RT's session cookie to not being directly accessible to
-javascript. The content is still sent during regular and AJAX requests,
-and other cookies are unaffected, but the session-id is less
-programmatically accessible to javascript. Turning this off should only
-be necessary in situations with odd client-side authentication
-requirements.
-
-=cut
-
-Set($WebHttpOnlyCookies, 1);
-
-=item C<$MinimumPasswordLength>
-
-C<$MinimumPasswordLength> defines the minimum length for user
-passwords. Setting it to 0 disables this check.
-
-=cut
-
-Set($MinimumPasswordLength, 5);
-
-=back
-
-
-=head1 Internationalization
-
-=over 4
-
-=item C<@LexiconLanguages>
-
-An array that contains languages supported by RT's
-internationalization interface. Defaults to all *.po lexicons;
-setting it to C<qw(en ja)> will make RT bilingual instead of
-multilingual, but will save some memory.
-
-=cut
-
-Set(@LexiconLanguages, qw(*));
-
-=item C<@EmailInputEncodings>
-
-An array that contains default encodings used to guess which charset
-an attachment uses, if it does not specify one explicitly. All
-options must be recognized by L<Encode::Guess>. The first element may
-also be '*', which enables encoding detection using
-L<Encode::Detect::Detector>, if installed.
-
-=cut
-
-Set(@EmailInputEncodings, qw(utf-8 iso-8859-1 us-ascii));
-
-=item C<$EmailOutputEncoding>
-
-The charset for localized email. Must be recognized by Encode.
-
-=cut
-
-Set($EmailOutputEncoding, "utf-8");
-
-=back
-
-
-
-
-
-
-
-=head1 Date and time handling
-
-=over 4
-
-=item C<$DateTimeFormat>
-
-You can choose date and time format. See the "Output formatters"
-section in perldoc F<lib/RT/Date.pm> for more options. This option
-can be overridden by users in their preferences.
-
-Some examples:
-
-C<Set($DateTimeFormat, "LocalizedDateTime");>
-C<Set($DateTimeFormat, { Format => "ISO", Seconds => 0 });>
-C<Set($DateTimeFormat, "RFC2822");>
-C<Set($DateTimeFormat, { Format => "RFC2822", Seconds => 0, DayOfWeek => 0 });>
-
-=cut
-
-Set($DateTimeFormat, "DefaultFormat");
-
-# Next two options are for Time::ParseDate
-
-=item C<$DateDayBeforeMonth>
-
-Set this to 1 if your local date convention looks like "dd/mm/yy"
-instead of "mm/dd/yy". Used only for parsing, not for displaying
-dates.
-
-=cut
-
-Set($DateDayBeforeMonth, 1);
-
-=item C<$AmbiguousDayInPast>, C<$AmbiguousDayInFuture>
-
-Should an unspecified day or year in a date refer to a future or a
-past value? For example, should a date of "Tuesday" default to mean
-the date for next Tuesday or last Tuesday? Should the date "March 1"
-default to the date for next March or last March?
-
-Set C<$AmbiguousDayInPast> for the last date, or
-C<$AmbiguousDayInFuture> for the next date; the default is usually
-correct. If both are set, C<$AmbiguousDayInPast> takes precedence.
-
-=cut
-
-Set($AmbiguousDayInPast, 0);
-Set($AmbiguousDayInFuture, 0);
-
-=item C<$DefaultTimeUnitsToHours>
-
-Use this to set the default units for time entry to hours instead of
-minutes. Note that this only effects entry, not display.
-
-=cut
-
-Set($DefaultTimeUnitsToHours, 0);
-
-=item C<$SimpleSearchIncludeResolved>
-
-By default, the simple ticket search in the top bar excludes "resolved" tickets
-unless a status argument is specified. Set this to a true value to include
-them.
-
-=cut
-
-Set($SimpleSearchIncludeResolved, 0);
-
-=back
-
-
-
-
-=head1 GnuPG integration
-
-A full description of the (somewhat extensive) GnuPG integration can
-be found by running the command `perldoc L<RT::Crypt::GnuPG>` (or
-`perldoc lib/RT/Crypt/GnuPG.pm` from your RT install directory).
-
-=over 4
-
-=item C<%GnuPG>
-
-Set C<OutgoingMessagesFormat> to 'inline' to use inline encryption and
-signatures instead of 'RFC' (GPG/MIME: RFC3156 and RFC1847) format.
-
-If you want to allow people to encrypt attachments inside the DB then
-set C<AllowEncryptDataInDB> to 1.
-
-Set C<RejectOnMissingPrivateKey> to false if you don't want to reject
-emails encrypted for key RT doesn't have and can not decrypt.
-
-Set C<RejectOnBadData> to false if you don't want to reject letters
-with incorrect GnuPG data.
-
-=cut
-
-Set(%GnuPG,
- Enable => 1,
- OutgoingMessagesFormat => "RFC", # Inline
- AllowEncryptDataInDB => 0,
-
- RejectOnMissingPrivateKey => 1,
- RejectOnBadData => 1,
-);
-
-=item C<%GnuPGOptions>
-
-Options to pass to the GnuPG program.
-
-If you override this in your RT_SiteConfig, you should be sure to
-include a homedir setting.
-
-Note that options with '-' character MUST be quoted.
-
-=cut
-
-Set(%GnuPGOptions,
- homedir => q{/opt/rt3/var/data/gpg},
-
-# URL of a keyserver
-# keyserver => 'hkp://subkeys.pgp.net',
-
-# enables the automatic retrieving of keys when encrypting
-# 'auto-key-locate' => 'keyserver',
-
-# enables the automatic retrieving of keys when verifying signatures
-# 'auto-key-retrieve' => undef,
-);
-
-=back
-
-
-
-=head1 Lifecycles
-
-=head2 Lifecycle definitions
-
-Each lifecycle is a list of possible statuses split into three logic
-sets: B<initial>, B<active> and B<inactive>. Each status in a
-lifecycle must be unique. (Statuses may not be repeated across sets.)
-Each set may have any number of statuses.
-
-For example:
-
- default => {
- initial => ['new'],
- active => ['open', 'stalled'],
- inactive => ['resolved', 'rejected', 'deleted'],
- ...
- },
-
-Status names can be from 1 to 64 ASCII characters. Statuses are
-localized using RT's standard internationalization and localization
-system.
-
-=over 4
-
-=item initial
-
-You can define multiple B<initial> statuses for tickets in a given
-lifecycle.
-
-RT will automatically set its B<Started> date when you change a
-ticket's status from an B<initial> state to an B<active> or
-B<inactive> status.
-
-=item active
-
-B<Active> tickets are "currently in play" - they're things that are
-being worked on and not yet complete.
-
-=item inactive
-
-B<Inactive> tickets are typically in their "final resting state".
-
-While you're free to implement a workflow that ignores that
-description, typically once a ticket enters an inactive state, it will
-never again enter an active state.
-
-RT will automatically set the B<Resolved> date when a ticket's status
-is changed from an B<Initial> or B<Active> status to an B<Inactive>
-status.
-
-B<deleted> is still a special status and protected by the
-B<DeleteTicket> right, unless you re-defined rights (read below). If
-you don't want to allow ticket deletion at any time simply don't
-include it in your lifecycle.
-
-=back
-
-Statuses in each set are ordered and listed in the UI in the defined
-order.
-
-Changes between statuses are constrained by transition rules, as
-described below.
-
-=head2 Default values
-
-In some cases a default value is used to display in UI or in API when
-value is not provided. You can configure defaults using the following
-syntax:
-
- default => {
- ...
- defaults => {
- on_create => 'new',
- on_resolve => 'resolved',
- ...
- },
- },
-
-The following defaults are used.
-
-=over 4
-
-=item on_create
-
-If you (or your code) doesn't specify a status when creating a ticket,
-RT will use the this status. See also L</Statuses available during
-ticket creation>.
-
-=item on_merge
-
-When tickets are merged, the status of the ticket that was merged
-away is forced to this value. It should be one of inactive statuses;
-'resolved' or its equivalent is most probably the best candidate.
-
-=item approved
-
-When an approval is accepted, the status of depending tickets will
-be changed to this value.
-
-=item denied
-
-When an approval is denied, the status of depending tickets will
-be changed to this value.
-
-=back
-
-=head2 Transitions between statuses and UI actions
-
-A B<Transition> is a change of status from A to B. You should define
-all possible transitions in each lifecycle using the following format:
-
- default => {
- ...
- transitions => {
- '' => [qw(new open resolved)],
- new => [qw(open resolved rejected deleted)],
- open => [qw(stalled resolved rejected deleted)],
- stalled => [qw(open)],
- resolved => [qw(open)],
- rejected => [qw(open)],
- deleted => [qw(open)],
- },
- ...
- },
-
-=head3 Statuses available during ticket creation
-
-By default users can create tickets with any status, except
-deleted. If you want to restrict statuses available during creation
-then describe transition from '' (empty string), like in the example
-above.
-
-=head3 Protecting status changes with rights
-
-A transition or group of transitions can be protected by a specific
-right. Additionally, you can name new right names, which will be added
-to the system to control that transition. For example, if you wished to
-create a lesser right than ModifyTicket for rejecting tickets, you could
-write:
-
- default => {
- ...
- rights => {
- '* -> deleted' => 'DeleteTicket',
- '* -> rejected' => 'RejectTicket',
- '* -> *' => 'ModifyTicket',
- },
- ...
- },
-
-This would create a new C<RejectTicket> right in the system which you
-could assign to whatever groups you choose.
-
-On the left hand side you can have the following variants:
-
- '<from> -> <to>'
- '* -> <to>'
- '<from> -> *'
- '* -> *'
-
-Valid transitions are listed in order of priority. If a user attempts
-to change a ticket's status from B<new> to B<open> then the lifecycle
-is checked for presence of an exact match, then for 'any to B<open>',
-'B<new> to any' and finally 'any to any'.
-
-If you don't define any rights, or there is no match for a transition,
-RT will use the B<DeleteTicket> or B<ModifyTicket> as appropriate.
-
-=head3 Labeling and defining actions
-
-For each transition you can define an action that will be shown in the
-UI; each action annotated with a label and an update type.
-
-Each action may provide a default update type, which can be
-B<Comment>, B<Respond>, or absent. For example, you may want your
-staff to write a reply to the end user when they change status from
-B<new> to B<open>, and thus set the update to B<Respond>. Neither
-B<Comment> nor B<Respond> are mandatory, and user may leave the
-message empty, regardless of the update type.
-
-This configuration can be used to accomplish what
-$ResolveDefaultUpdateType was used for in RT 3.8.
-
-Use the following format to define labels and actions of transitions:
-
- default => {
- ...
- actions => [
- 'new -> open' => { label => 'Open it', update => 'Respond' },
- 'new -> resolved' => { label => 'Resolve', update => 'Comment' },
- 'new -> rejected' => { label => 'Reject', update => 'Respond' },
- 'new -> deleted' => { label => 'Delete' },
-
- 'open -> stalled' => { label => 'Stall', update => 'Comment' },
- 'open -> resolved' => { label => 'Resolve', update => 'Comment' },
- 'open -> rejected' => { label => 'Reject', update => 'Respond' },
-
- 'stalled -> open' => { label => 'Open it' },
- 'resolved -> open' => { label => 'Re-open', update => 'Comment' },
- 'rejected -> open' => { label => 'Re-open', update => 'Comment' },
- 'deleted -> open' => { label => 'Undelete' },
- ],
- ...
- },
-
-In addition, you may define multiple actions for the same transition.
-Alternately, you may use '* -> x' to match more than one transition.
-For example:
-
- default => {
- ...
- actions => [
- ...
- 'new -> rejected' => { label => 'Reject', update => 'Respond' },
- 'new -> rejected' => { label => 'Quick Reject' },
- ...
- '* -> deleted' => { label => 'Delete' },
- ...
- ],
- ...
- },
-
-=head2 Moving tickets between queues with different lifecycles
-
-Unless there is an explicit mapping between statuses in two different
-lifecycles, you can not move tickets between queues with these
-lifecycles. This is true even if the different lifecycles use the exact
-same set of statuses. Such a mapping is defined as follows:
-
- __maps__ => {
- 'from lifecycle -> to lifecycle' => {
- 'status in left lifecycle' => 'status in right lifecycle',
- ...
- },
- ...
- },
-
-=cut
-
-Set(%Lifecycles,
- default => {
- initial => [ 'new' ],
- active => [ 'open', 'stalled' ],
- inactive => [ 'resolved', 'rejected', 'deleted' ],
-
- defaults => {
- on_create => 'new',
- on_merge => 'resolved',
- approved => 'open',
- denied => 'rejected',
- },
-
- transitions => {
- '' => [qw(new open resolved)],
-
- # from => [ to list ],
- new => [qw(open stalled resolved rejected deleted)],
- open => [qw(new stalled resolved rejected deleted)],
- stalled => [qw(new open rejected resolved deleted)],
- resolved => [qw(new open stalled rejected deleted)],
- rejected => [qw(new open stalled resolved deleted)],
- deleted => [qw(new open stalled rejected resolved)],
- },
- rights => {
- '* -> deleted' => 'DeleteTicket',
- '* -> *' => 'ModifyTicket',
- },
- actions => [
- 'new -> open' => {
- label => 'Open It', # loc
- update => 'Respond',
- },
- 'new -> resolved' => {
- label => 'Resolve', # loc
- update => 'Comment',
- },
- 'new -> rejected' => {
- label => 'Reject', # loc
- update => 'Respond',
- },
- 'new -> deleted' => {
- label => 'Delete', # loc
- },
-
- 'open -> stalled' => {
- label => 'Stall', # loc
- update => 'Comment',
- },
- 'open -> resolved' => {
- label => 'Resolve', # loc
- update => 'Comment',
- },
- 'open -> rejected' => {
- label => 'Reject', # loc
- update => 'Respond',
- },
-
- 'stalled -> open' => {
- label => 'Open It', # loc
- },
- 'resolved -> open' => {
- label => 'Re-open', # loc
- update => 'Comment',
- },
- 'rejected -> open' => {
- label => 'Re-open', # loc
- update => 'Comment',
- },
- 'deleted -> open' => {
- label => 'Undelete', # loc
- },
- ],
- },
-# don't change lifecyle of the approvals, they are not capable to deal with
-# custom statuses
- approvals => {
- initial => [ 'new' ],
- active => [ 'open', 'stalled' ],
- inactive => [ 'resolved', 'rejected', 'deleted' ],
-
- defaults => {
- on_create => 'new',
- on_merge => 'resolved',
- },
-
- transitions => {
- '' => [qw(new open resolved)],
-
- # from => [ to list ],
- new => [qw(open stalled resolved rejected deleted)],
- open => [qw(new stalled resolved rejected deleted)],
- stalled => [qw(new open rejected resolved deleted)],
- resolved => [qw(new open stalled rejected deleted)],
- rejected => [qw(new open stalled resolved deleted)],
- deleted => [qw(new open stalled rejected resolved)],
- },
- rights => {
- '* -> deleted' => 'DeleteTicket',
- '* -> rejected' => 'ModifyTicket',
- '* -> *' => 'ModifyTicket',
- },
- actions => [
- 'new -> open' => {
- label => 'Open It', # loc
- update => 'Respond',
- },
- 'new -> resolved' => {
- label => 'Resolve', # loc
- update => 'Comment',
- },
- 'new -> rejected' => {
- label => 'Reject', # loc
- update => 'Respond',
- },
- 'new -> deleted' => {
- label => 'Delete', # loc
- },
-
- 'open -> stalled' => {
- label => 'Stall', # loc
- update => 'Comment',
- },
- 'open -> resolved' => {
- label => 'Resolve', # loc
- update => 'Comment',
- },
- 'open -> rejected' => {
- label => 'Reject', # loc
- update => 'Respond',
- },
-
- 'stalled -> open' => {
- label => 'Open It', # loc
- },
- 'resolved -> open' => {
- label => 'Re-open', # loc
- update => 'Comment',
- },
- 'rejected -> open' => {
- label => 'Re-open', # loc
- update => 'Comment',
- },
- 'deleted -> open' => {
- label => 'Undelete', # loc
- },
- ],
- },
-);
-
-
-
-
-
-=head1 Administrative interface
-
-=over 4
-
-=item C<$ShowRTPortal>
-
-RT can show administrators a feed of recent RT releases and other
-related announcements and information from Best Practical on the top
-level Configuration page. This feature helps you stay up to date on
-RT security announcements and version updates.
-
-RT provides this feature using an "iframe" on C</Admin/index.html>
-which asks the administrator's browser to show an inline page from
-Best Practical's website.
-
-If you'd rather not make this feature available to your
-administrators, set C<$ShowRTPortal> to a false value.
-
-=cut
-
-Set($ShowRTPortal, 1);
-
-=item C<%AdminSearchResultFormat>
-
-In the admin interface, format strings similar to tickets result
-formats are used. Use C<%AdminSearchResultFormat> to define the format
-strings used in the admin interface on a per-RT-class basis.
-
-=cut
-
-Set(%AdminSearchResultFormat,
- Queues =>
- q{'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,__Description__,__Address__,__Priority__,__DefaultDueIn__,__Disabled__},
-
- Groups =>
- q{'<a href="__WebPath__/Admin/Groups/Modify.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Groups/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,'__Description__'},
-
- Users =>
- q{'<a href="__WebPath__/Admin/Users/Modify.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Users/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,__RealName__, __EmailAddress__},
-
- CustomFields =>
- q{'<a href="__WebPath__/Admin/CustomFields/Modify.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/CustomFields/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,__AppliedTo__, __FriendlyType__, __FriendlyPattern__},
-
- Scrips =>
- q{'<a href="__WebPath__/Admin/Queues/Scrip.html?id=__id__&Queue=__QueueId__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Queues/Scrip.html?id=__id__&Queue=__QueueId__">__Description__</a>/TITLE:Description'}
- .q{,__Stage__, __Condition__, __Action__, __Template__},
-
- GlobalScrips =>
- q{'<a href="__WebPath__/Admin/Global/Scrip.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Global/Scrip.html?id=__id__">__Description__</a>/TITLE:Description'}
- .q{,__Stage__, __Condition__, __Action__, __Template__},
-
- Templates =>
- q{'<a href="__WebPath__/__WebRequestPathDir__/Template.html?Queue=__QueueId__&Template=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/__WebRequestPathDir__/Template.html?Queue=__QueueId__&Template=__id__">__Name__</a>/TITLE:Name'}
- .q{,'__Description__'},
- Classes =>
- q{ '<a href="__WebPath__/Admin/Articles/Classes/Modify.html?id=__id__">__id__</a>/TITLE:#'}
- .q{,'<a href="__WebPath__/Admin/Articles/Classes/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,__Description__},
-);
-
-=back
-
-
-
-
-=head1 Development options
-
-=over 4
-
-=item C<$DevelMode>
-
-RT comes with a "Development mode" setting. This setting, as a
-convenience for developers, turns on several of development options
-that you most likely don't want in production:
-
-=over 4
-
-=item *
-
-Disables CSS and JS minification and concatenation. Both CSS and JS
-will be instead be served as a number of individual smaller files,
-unchanged from how they are stored on disk.
-
-=item *
-
-Uses L<Module::Refresh> to reload changed Perl modules on each
-request.
-
-=item *
-
-Turns off Mason's C<static_source> directive; this causes Mason to
-reload template files which have been modified on disk.
-
-=item *
-
-Turns on Mason's HTML C<error_format>; this renders compilation errors
-to the browser, along with a full stack trace. It is possible for
-stack traces to reveal sensitive information such as passwords or
-ticket content.
-
-=item *
-
-Turns off caching of callbacks; this enables additional callbacks to
-be added while the server is running.
-
-=back
-
-=cut
-
-Set($DevelMode, "0");
-
-
-=item C<$RecordBaseClass>
-
-What abstract base class should RT use for its records. You should
-probably never change this.
-
-Valid values are C<DBIx::SearchBuilder::Record> or
-C<DBIx::SearchBuilder::Record::Cachable>
-
-=cut
-
-Set($RecordBaseClass, "DBIx::SearchBuilder::Record::Cachable");
-
-
-=item C<@MasonParameters>
-
-C<@MasonParameters> is the list of parameters for the constructor of
-HTML::Mason's Apache or CGI Handler. This is normally only useful for
-debugging, e.g. profiling individual components with:
-
- use MasonX::Profiler; # available on CPAN
- Set(@MasonParameters, (preamble => 'my $p = MasonX::Profiler->new($m, $r);'));
-
-=cut
-
-Set(@MasonParameters, ());
-
-=item C<$StatementLog>
-
-RT has rudimentary SQL statement logging support; simply set
-C<$StatementLog> to be the level that you wish SQL statements to be
-logged at.
-
-Enabling this option will also expose the SQL Queries page in the
-Configuration -> Tools menu for SuperUsers.
-
-=cut
-
-Set($StatementLog, undef);
-
-=back
-
-
-
-
-=head1 Deprecated options
-
-=over 4
-
-=item C<$LinkTransactionsRun1Scrip>
-
-RT-3.4 backward compatibility setting. Add/Delete Link used to record
-one transaction and run one scrip. Set this value to 1 if you want
-only one of the link transactions to have scrips run.
-
-=cut
-
-Set($LinkTransactionsRun1Scrip, 0);
-
-=item C<$ResolveDefaultUpdateType>
-
-This option has been deprecated. You can configure this site-wide
-with L</Lifecycles> (see L</Labeling and defining actions>).
-
-=cut
-
-1;
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use lib "/opt/rt3/local/lib";
-use lib "/opt/rt3/lib";
-
-
-use RT;
-RT::LoadConfig();
-RT::Init();
-
-use RT::Queues;
-
-my $queues = RT::Queues->new( RT->SystemUser );
-$queues->UnLimit();
-while ( my $queue = $queues->Next ) {
- print "Processing queue ". ($queue->Name || $queue->id) ."...\n";
- my $old_attr = $queue->FirstAttribute('BrandedSubjectTag');
- unless ( $old_attr ) {
- print "\thas no old-style subject tag. skipping\n";
- next;
- }
- my $old_value = $old_attr->Content;
- unless ( $old_value ) {
- print "\thas empty old-style subject tag\n";
- } else {
- my ($status, $msg) = $queue->SetSubjectTag( $old_value );
- unless ( $status ) {
- print STDERR "\tERROR. Couldn't set tag: $msg\n";
- next;
- } else {
- print "\thave set new-style subject tag to '$old_value'\n";
- }
- }
-
- my ($status, $msg) = $queue->DeleteAttribute('BrandedSubjectTag');
- unless ( $status ) {
- print STDERR "\tERROR. Couldn't delete old-style tag: $msg\n";
- next;
- } else {
- print "\tdeleted old-style tag entry\n";
- }
- print "\tDONE\n";
-}
-
-exit 0;
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use lib "/opt/rt3/local/lib";
-use lib "/opt/rt3/lib";
-
-
-use RT;
-RT::LoadConfig();
-RT::Init();
-
-use RT::Attributes;
-my $attrs = RT::Attributes->new( RT->SystemUser );
-$attrs->Limit(FIELD => 'ObjectType', OPERATOR=> '=', VALUE => 'RT::User');
-$attrs->Limit(FIELD => 'Name', OPERATOR=> '=', VALUE => 'ical-auth-token');
-while ( my $attr = $attrs->Next ) {
- my $uid = $attr->ObjectId;
- print "Processing auth token of user #". $uid ."...\n";
-
- my $user = RT::User->new( RT->SystemUser );
- $user->Load( $uid );
- unless ( $user->id ) {
- print STDERR "\tERROR. Couldn't load user record\n";
- next;
- }
-
- my ($status, $msg);
-
- ($status, $msg) = $user->DeleteAttribute('AuthToken')
- if $user->FirstAttribute('AuthToken');
- unless ( $status ) {
- print STDERR "\tERROR. Couldn't delete duplicated attribute: $msg\n";
- next;
- } else {
- print "\tdeleted duplicate attribute\n";
- }
-
- ($status, $msg) = $attr->SetName('AuthToken');
- unless ( $status ) {
- print STDERR "\tERROR. Couldn't rename attribute: $msg\n";
- next;
- } else {
- print "\trenamed attribute\n";
- }
- print "\tDONE\n";
-}
-
-exit 0;
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use lib "/opt/rt3/local/lib";
-use lib "/opt/rt3/lib";
-
-use RT;
-RT::LoadConfig();
-RT->Config->Set('LogToScreen' => 'debug');
-RT::Init();
-
-$| = 1;
-
-if (my $re = RT->Config->Get('RTAddressRegexp')) {
- print "No need to use this script, you already have RTAddressRegexp set to $re\n";
- exit;
-}
-
-use RT::Queues;
-my $queues = RT::Queues->new( RT->SystemUser );
-$queues->UnLimit;
-
-my %merged;
-merge(\%merged, RT->Config->Get('CorrespondAddress'), RT->Config->Get('CommentAddress'));
-while ( my $queue = $queues->Next ) {
- merge(\%merged, $queue->CorrespondAddress, $queue->CommentAddress);
-}
-
-my @domains;
-for my $domain (sort keys %merged) {
- my @addresses;
- for my $base (sort keys %{$merged{$domain}}) {
- my @subbits = keys(%{$merged{$domain}{$base}});
- if (@subbits > 1) {
- push @addresses, "\Q$base\E(?:".join("|",@subbits).")";
- } else {
- push @addresses, "\Q$base\E$subbits[0]";
- }
- }
- if (@addresses > 1) {
- push @domains, "(?:".join("|", @addresses).")\Q\@".$domain."\E";
- } else {
- push @domains, "$addresses[0]\Q\@$domain\E";
- }
-}
-my $re = join "|", @domains;
-
-print <<ENDDESCRIPTION;
-You can add the following to RT_SiteConfig.pm, but may want to collapse it into a more efficient regexp.
-Keep in mind that this only contains the email addresses that RT knows about, you should also examine
-your mail system for aliases that reach RT but which RT doesn't know about.
-ENDDESCRIPTION
-print "Set(\$RTAddressRegexp,qr{^(?:${re})\$}i);\n";
-
-sub merge {
- my $merged = shift;
- for my $address (grep {defined and length} @_) {
- $address =~ /^\s*(.*?)(-comments?)?\@(.*?)\s*$/;
- $merged->{lc $3}{$1}{$2||''}++;
- }
-}
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use lib "/opt/rt3/local/lib";
-use lib "/opt/rt3/lib";
-
-use RT;
-RT::LoadConfig();
-RT->Config->Set('LogToScreen' => 'debug');
-RT::Init();
-
-$| = 1;
-
-$RT::Handle->BeginTransaction();
-
-use RT::CustomFields;
-my $CFs = RT::CustomFields->new( RT->SystemUser );
-$CFs->UnLimit;
-$CFs->Limit( FIELD => 'Type', VALUE => 'Select' );
-
-my $seen;
-while (my $cf = $CFs->Next ) {
- next if $cf->BasedOnObj->Id;
- my @categories;
- my %mapping;
- my $values = $cf->Values;
- while (my $value = $values->Next) {
- next unless defined $value->Category and length $value->Category;
- push @categories, $value->Category unless grep {$_ eq $value->Category} @categories;
- $mapping{$value->Name} = $value->Category;
- }
- next unless @categories;
-
- $seen++;
- print "Found CF '@{[$cf->Name]}' with categories:\n";
- print " $_\n" for @categories;
-
- print "Split this CF's categories into a hierarchical custom field (Y/n)? ";
- my $dothis = <>;
- next if $dothis =~ /n/i;
-
- print "Enter name of CF to create as category ('@{[$cf->Name]} category'): ";
- my $newname = <>;
- chomp $newname;
- $newname = $cf->Name . " category" unless length $newname;
-
- # bump the CF's sort oder up by one
- $cf->SetSortOrder( ($cf->SortOrder || 0) + 1 );
-
- # ..and add a new CF before it
- my $new = RT::CustomField->new( RT->SystemUser );
- my ($id, $msg) = $new->Create(
- Name => $newname,
- Type => 'Select',
- MaxValues => 1,
- LookupType => $cf->LookupType,
- SortOrder => $cf->SortOrder - 1,
- );
- die "Can't create custom field '$newname': $msg" unless $id;
-
- # Set the CF to be based on what we just made
- $cf->SetBasedOn( $new->Id );
-
- # Apply it to all of the same things
- {
- my $ocfs = RT::ObjectCustomFields->new( RT->SystemUser );
- $ocfs->LimitToCustomField( $cf->Id );
- while (my $ocf = $ocfs->Next) {
- my $newocf = RT::ObjectCustomField->new( RT->SystemUser );
- ($id, $msg) = $newocf->Create(
- SortOrder => $ocf->SortOrder,
- CustomField => $new->Id,
- ObjectId => $ocf->ObjectId,
- );
- die "Can't create ObjectCustomField: $msg" unless $id;
- }
- }
-
- # Copy over all of the rights
- {
- my $acl = RT::ACL->new( RT->SystemUser );
- $acl->LimitToObject( $cf );
- while (my $ace = $acl->Next) {
- my $newace = RT::ACE->new( RT->SystemUser );
- ($id, $msg) = $newace->Create(
- PrincipalId => $ace->PrincipalId,
- PrincipalType => $ace->PrincipalType,
- RightName => $ace->RightName,
- Object => $new,
- );
- die "Can't assign rights: $msg" unless $id;
- }
- }
-
- # Add values for all of the categories
- for my $i (0..$#categories) {
- ($id, $msg) = $new->AddValue(
- Name => $categories[$i],
- SortOrder => $i + 1,
- );
- die "Can't create custom field value: $msg" unless $id;
- }
-
- # Grovel through all ObjectCustomFieldValues, and add the
- # appropriate category
- {
- my $ocfvs = RT::ObjectCustomFieldValues->new( RT->SystemUser );
- $ocfvs->LimitToCustomField( $cf->Id );
- while (my $ocfv = $ocfvs->Next) {
- next unless exists $mapping{$ocfv->Content};
- my $newocfv = RT::ObjectCustomFieldValue->new( RT->SystemUser );
- ($id, $msg) = $newocfv->Create(
- CustomField => $new->Id,
- ObjectType => $ocfv->ObjectType,
- ObjectId => $ocfv->ObjectId,
- Content => $mapping{$ocfv->Content},
- );
- }
- }
-}
-
-$RT::Handle->Commit;
-print "No custom fields with categories found\n" unless $seen;
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use lib "/opt/rt3/local/lib";
-use lib "/opt/rt3/lib";
-
-use RT;
-RT::LoadConfig;
-RT::Init;
-
-$| = 1;
-
-use Getopt::Long;
-use Digest::SHA;
-my $fix;
-GetOptions("fix!" => \$fix);
-
-use RT::Users;
-my $users = RT::Users->new( $RT::SystemUser );
-$users->Limit(
- FIELD => 'Password',
- OPERATOR => 'IS NOT',
- VALUE => 'NULL',
- ENTRYAGGREGATOR => 'AND',
-);
-$users->Limit(
- FIELD => 'Password',
- OPERATOR => '!=',
- VALUE => '*NO-PASSWORD*',
- ENTRYAGGREGATOR => 'AND',
-);
-$users->Limit(
- FIELD => 'Password',
- OPERATOR => 'NOT STARTSWITH',
- VALUE => '!',
- ENTRYAGGREGATOR => 'AND',
-);
-push @{$users->{'restrictions'}{ "main.Password" }}, "AND", {
- field => 'LENGTH(main.Password)',
- op => '<',
- value => '40',
-};
-
-my $count = $users->Count;
-if ($count == 0) {
- print "No users with unsalted or weak cryptography found.\n";
- exit 0;
-}
-
-if ($fix) {
- print "Upgrading $count users...\n";
- while (my $u = $users->Next) {
- my $stored = $u->__Value("Password");
- my $raw;
- if (length $stored == 32) {
- $raw = pack("H*",$stored);
- } elsif (length $stored == 22) {
- $raw = MIME::Base64::decode_base64($stored);
- } elsif (length $stored == 13) {
- printf "%20s => Old crypt() format, cannot upgrade\n", $u->Name;
- } else {
- printf "%20s => Unknown password format!\n", $u->Name;
- }
- next unless $raw;
-
- my $salt = pack("C4",map{int rand(256)} 1..4);
- my $sha = Digest::SHA::sha256(
- $salt . $raw
- );
- $u->_Set(
- Field => "Password",
- Value => MIME::Base64::encode_base64(
- $salt . substr($sha,0,26), ""),
- );
- }
- print "Done.\n";
- exit 0;
-} else {
- if ($count < 20) {
- print "$count users found with unsalted or weak-cryptography passwords:\n";
- print " Id | Name\n", "-"x9, "+", "-"x9, "\n";
- while (my $u = $users->Next) {
- printf "%8d | %s\n", $u->Id, $u->Name;
- }
- } else {
- print "$count users found with unsalted or weak-cryptography passwords\n";
- }
-
- print "\n", "Run again with --fix to upgrade.\n";
- exit 1;
-}
+++ /dev/null
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-
-use strict;
-use warnings;
-
-package RT;
-
-
-use File::Spec ();
-use Cwd ();
-
-use vars qw($Config $System $SystemUser $Nobody $Handle $Logger $_Privileged $_Unprivileged $_INSTALL_MODE);
-
-use vars qw($BasePath
- $EtcPath
- $BinPath
- $SbinPath
- $VarPath
- $LexiconPath
- $PluginPath
- $LocalPath
- $LocalEtcPath
- $LocalLibPath
- $LocalLexiconPath
- $LocalPluginPath
- $MasonComponentRoot
- $MasonLocalComponentRoot
- $MasonDataDir
- $MasonSessionDir);
-
-
-RT->LoadGeneratedData();
-
-=head1 NAME
-
-RT - Request Tracker
-
-=head1 SYNOPSIS
-
-A fully featured request tracker package
-
-=head1 DESCRIPTION
-
-=head2 INITIALIZATION
-
-=head2 LoadConfig
-
-Load RT's config file. First, the site configuration file
-(F<RT_SiteConfig.pm>) is loaded, in order to establish overall site
-settings like hostname and name of RT instance. Then, the core
-configuration file (F<RT_Config.pm>) is loaded to set fallback values
-for all settings; it bases some values on settings from the site
-configuration file.
-
-In order for the core configuration to not override the site's
-settings, the function C<Set> is used; it only sets values if they
-have not been set already.
-
-=cut
-
-sub LoadConfig {
- require RT::Config;
- $Config = RT::Config->new;
- $Config->LoadConfigs;
- require RT::I18N;
-
- # RT::Essentials mistakenly recommends that WebPath be set to '/'.
- # If the user does that, do what they mean.
- $RT::WebPath = '' if ($RT::WebPath eq '/');
-
- # fix relative LogDir and GnuPG homedir
- unless ( File::Spec->file_name_is_absolute( $Config->Get('LogDir') ) ) {
- $Config->Set( LogDir =>
- File::Spec->catfile( $BasePath, $Config->Get('LogDir') ) );
- }
-
- my $gpgopts = $Config->Get('GnuPGOptions');
- unless ( File::Spec->file_name_is_absolute( $gpgopts->{homedir} ) ) {
- $gpgopts->{homedir} = File::Spec->catfile( $BasePath, $gpgopts->{homedir} );
- }
-
- return $Config;
-}
-
-=head2 Init
-
-L<Connects to the database|/ConnectToDatabase>, L<initilizes system
-objects|/InitSystemObjects>, L<preloads classes|/InitClasses>, L<sets
-up logging|/InitLogging>, and L<loads plugins|/InitPlugins>.
-
-=cut
-
-sub Init {
-
- my @arg = @_;
-
- CheckPerlRequirements();
-
- InitPluginPaths();
-
- #Get a database connection
- ConnectToDatabase();
- InitSystemObjects();
- InitClasses();
- InitLogging(@arg);
- InitPlugins();
- RT::I18N->Init;
- RT->Config->PostLoadCheck;
-
-}
-
-=head2 ConnectToDatabase
-
-Get a database connection. See also L</Handle>.
-
-=cut
-
-sub ConnectToDatabase {
- require RT::Handle;
- $Handle = RT::Handle->new unless $Handle;
- $Handle->Connect;
- return $Handle;
-}
-
-=head2 InitLogging
-
-Create the Logger object and set up signal handlers.
-
-=cut
-
-sub InitLogging {
-
- my %arg = @_;
-
- # We have to set the record separator ($, man perlvar)
- # or Log::Dispatch starts getting
- # really pissy, as some other module we use unsets it.
- $, = '';
- use Log::Dispatch 1.6;
-
- my %level_to_num = (
- map( { $_ => } 0..7 ),
- debug => 0,
- info => 1,
- notice => 2,
- warning => 3,
- error => 4, 'err' => 4,
- critical => 5, crit => 5,
- alert => 6,
- emergency => 7, emerg => 7,
- );
-
- unless ( $RT::Logger ) {
-
- $RT::Logger = Log::Dispatch->new;
-
- my $stack_from_level;
- if ( $stack_from_level = RT->Config->Get('LogStackTraces') ) {
- # if option has old style '\d'(true) value
- $stack_from_level = 0 if $stack_from_level =~ /^\d+$/;
- $stack_from_level = $level_to_num{ $stack_from_level } || 0;
- } else {
- $stack_from_level = 99; # don't log
- }
-
- my $simple_cb = sub {
- # if this code throw any warning we can get segfault
- no warnings;
- my %p = @_;
-
- # skip Log::* stack frames
- my $frame = 0;
- $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
- my ($package, $filename, $line) = caller($frame);
-
- $p{'message'} =~ s/(?:\r*\n)+$//;
- return "[". gmtime(time) ."] [". $p{'level'} ."]: "
- . $p{'message'} ." ($filename:$line)\n";
- };
-
- my $syslog_cb = sub {
- # if this code throw any warning we can get segfault
- no warnings;
- my %p = @_;
-
- my $frame = 0; # stack frame index
- # skip Log::* stack frames
- $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
- my ($package, $filename, $line) = caller($frame);
-
- # syswrite() cannot take utf8; turn it off here.
- Encode::_utf8_off($p{message});
-
- $p{message} =~ s/(?:\r*\n)+$//;
- if ($p{level} eq 'debug') {
- return "$p{message}\n";
- } else {
- return "$p{message} ($filename:$line)\n";
- }
- };
-
- my $stack_cb = sub {
- no warnings;
- my %p = @_;
- return $p{'message'} unless $level_to_num{ $p{'level'} } >= $stack_from_level;
-
- require Devel::StackTrace;
- my $trace = Devel::StackTrace->new( ignore_class => [ 'Log::Dispatch', 'Log::Dispatch::Base' ] );
- return $p{'message'} . $trace->as_string;
-
- # skip calling of the Log::* subroutins
- my $frame = 0;
- $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
- $frame++ while caller($frame) && (caller($frame))[3] =~ /^Log::/;
-
- $p{'message'} .= "\nStack trace:\n";
- while( my ($package, $filename, $line, $sub) = caller($frame++) ) {
- $p{'message'} .= "\t$sub(...) called at $filename:$line\n";
- }
- return $p{'message'};
- };
-
- if ( $Config->Get('LogToFile') ) {
- my ($filename, $logdir) = (
- $Config->Get('LogToFileNamed') || 'rt.log',
- $Config->Get('LogDir') || File::Spec->catdir( $VarPath, 'log' ),
- );
- if ( $filename =~ m![/\\]! ) { # looks like an absolute path.
- ($logdir) = $filename =~ m{^(.*[/\\])};
- }
- else {
- $filename = File::Spec->catfile( $logdir, $filename );
- }
-
- unless ( -d $logdir && ( ( -f $filename && -w $filename ) || -w $logdir ) ) {
- # localizing here would be hard when we don't have a current user yet
- die "Log file '$filename' couldn't be written or created.\n RT can't run.";
- }
-
- require Log::Dispatch::File;
- $RT::Logger->add( Log::Dispatch::File->new
- ( name=>'file',
- min_level=> $Config->Get('LogToFile'),
- filename=> $filename,
- mode=>'append',
- callbacks => [ $simple_cb, $stack_cb ],
- ));
- }
- if ( $Config->Get('LogToScreen') ) {
- require Log::Dispatch::Screen;
- $RT::Logger->add( Log::Dispatch::Screen->new
- ( name => 'screen',
- min_level => $Config->Get('LogToScreen'),
- callbacks => [ $simple_cb, $stack_cb ],
- stderr => 1,
- ));
- }
- if ( $Config->Get('LogToSyslog') ) {
- require Log::Dispatch::Syslog;
- $RT::Logger->add(Log::Dispatch::Syslog->new
- ( name => 'syslog',
- ident => 'RT',
- min_level => $Config->Get('LogToSyslog'),
- callbacks => [ $syslog_cb, $stack_cb ],
- stderr => 1,
- $Config->Get('LogToSyslogConf'),
- ));
- }
- }
- InitSignalHandlers(%arg);
-}
-
-sub InitSignalHandlers {
-
- my %arg = @_;
-
-# Signal handlers
-## This is the default handling of warnings and die'ings in the code
-## (including other used modules - maybe except for errors catched by
-## Mason). It will log all problems through the standard logging
-## mechanism (see above).
-
- unless ( $arg{'NoSignalHandlers'} ) {
-
- $SIG{__WARN__} = sub {
- # The 'wide character' warnings has to be silenced for now, at least
- # until HTML::Mason offers a sane way to process both raw output and
- # unicode strings.
- # use 'goto &foo' syntax to hide ANON sub from stack
- if( index($_[0], 'Wide character in ') != 0 ) {
- unshift @_, $RT::Logger, qw(level warning message);
- goto &Log::Dispatch::log;
- }
- };
-
- #When we call die, trap it and log->crit with the value of the die.
-
- $SIG{__DIE__} = sub {
- # if we are not in eval and perl is not parsing code
- # then rollback transactions and log RT error
- unless ($^S || !defined $^S ) {
- $RT::Handle->Rollback(1) if $RT::Handle;
- $RT::Logger->crit("$_[0]") if $RT::Logger;
- }
- die $_[0];
- };
-
- }
-}
-
-
-sub CheckPerlRequirements {
- if ($^V < 5.008003) {
- die sprintf "RT requires Perl v5.8.3 or newer. Your current Perl is v%vd\n", $^V;
- }
-
- # use $error here so the following "die" can still affect the global $@
- my $error;
- {
- local $@;
- eval {
- my $x = '';
- my $y = \$x;
- require Scalar::Util;
- Scalar::Util::weaken($y);
- };
- $error = $@;
- }
-
- if ($error) {
- die <<"EOF";
-
-RT requires the Scalar::Util module be built with support for the 'weaken'
-function.
-
-It is sometimes the case that operating system upgrades will replace
-a working Scalar::Util with a non-working one. If your system was working
-correctly up until now, this is likely the cause of the problem.
-
-Please reinstall Scalar::Util, being careful to let it build with your C
-compiler. Usually this is as simple as running the following command as
-root.
-
- perl -MCPAN -e'install Scalar::Util'
-
-EOF
-
- }
-}
-
-=head2 InitClasses
-
-Load all modules that define base classes.
-
-=cut
-
-sub InitClasses {
- shift if @_%2; # so we can call it as a function or method
- my %args = (@_);
- require RT::Tickets;
- require RT::Transactions;
- require RT::Attachments;
- require RT::Users;
- require RT::Principals;
- require RT::CurrentUser;
- require RT::Templates;
- require RT::Queues;
- require RT::ScripActions;
- require RT::ScripConditions;
- require RT::Scrips;
- require RT::Groups;
- require RT::GroupMembers;
- require RT::CustomFields;
- require RT::CustomFieldValues;
- require RT::ObjectCustomFields;
- require RT::ObjectCustomFieldValues;
- require RT::Attributes;
- require RT::Dashboard;
- require RT::Approval;
- require RT::Lifecycle;
- require RT::Link;
- require RT::Article;
- require RT::Articles;
- require RT::Class;
- require RT::Classes;
- require RT::ObjectClass;
- require RT::ObjectClasses;
- require RT::ObjectTopic;
- require RT::ObjectTopics;
- require RT::Topic;
- require RT::Topics;
-
- # on a cold server (just after restart) people could have an object
- # in the session, as we deserialize it so we never call constructor
- # of the class, so the list of accessible fields is empty and we die
- # with "Method xxx is not implemented in RT::SomeClass"
-
- # without this, we also can never call _ClassAccessible, because we
- # won't have filled RT::Record::_TABLE_ATTR
- $_->_BuildTableAttributes foreach qw(
- RT::Ticket
- RT::Transaction
- RT::Attachment
- RT::User
- RT::Principal
- RT::Template
- RT::Queue
- RT::ScripAction
- RT::ScripCondition
- RT::Scrip
- RT::Group
- RT::GroupMember
- RT::CustomField
- RT::CustomFieldValue
- RT::ObjectCustomField
- RT::ObjectCustomFieldValue
- RT::Attribute
- RT::ACE
- RT::Link
- RT::Article
- RT::Class
- RT::ObjectClass
- RT::ObjectTopic
- RT::Topic
- );
-
- if ( $args{'Heavy'} ) {
- # load scrips' modules
- my $scrips = RT::Scrips->new(RT->SystemUser);
- $scrips->Limit( FIELD => 'Stage', OPERATOR => '!=', VALUE => 'Disabled' );
- while ( my $scrip = $scrips->Next ) {
- local $@;
- eval { $scrip->LoadModules } or
- $RT::Logger->error("Invalid Scrip ".$scrip->Id.". Unable to load the Action or Condition. ".
- "You should delete or repair this Scrip in the admin UI.\n$@\n");
- }
-
- foreach my $class ( grep $_, RT->Config->Get('CustomFieldValuesSources') ) {
- local $@;
- eval "require $class; 1" or $RT::Logger->error(
- "Class '$class' is listed in CustomFieldValuesSources option"
- ." in the config, but we failed to load it:\n$@\n"
- );
- }
-
- }
-}
-
-=head2 InitSystemObjects
-
-Initializes system objects: C<$RT::System>, C<< RT->SystemUser >>
-and C<< RT->Nobody >>.
-
-=cut
-
-sub InitSystemObjects {
-
- #RT's system user is a genuine database user. its id lives here
- require RT::CurrentUser;
- $SystemUser = RT::CurrentUser->new;
- $SystemUser->LoadByName('RT_System');
-
- #RT's "nobody user" is a genuine database user. its ID lives here.
- $Nobody = RT::CurrentUser->new;
- $Nobody->LoadByName('Nobody');
-
- require RT::System;
- $System = RT::System->new( $SystemUser );
-}
-
-=head1 CLASS METHODS
-
-=head2 Config
-
-Returns the current L<config object|RT::Config>, but note that
-you must L<load config|/LoadConfig> first otherwise this method
-returns undef.
-
-Method can be called as class method.
-
-=cut
-
-sub Config { return $Config || shift->LoadConfig(); }
-
-=head2 DatabaseHandle
-
-Returns the current L<database handle object|RT::Handle>.
-
-See also L</ConnectToDatabase>.
-
-=cut
-
-sub DatabaseHandle { return $Handle }
-
-=head2 Logger
-
-Returns the logger. See also L</InitLogging>.
-
-=cut
-
-sub Logger { return $Logger }
-
-=head2 System
-
-Returns the current L<system object|RT::System>. See also
-L</InitSystemObjects>.
-
-=cut
-
-sub System { return $System }
-
-=head2 SystemUser
-
-Returns the system user's object, it's object of
-L<RT::CurrentUser> class that represents the system. See also
-L</InitSystemObjects>.
-
-=cut
-
-sub SystemUser { return $SystemUser }
-
-=head2 Nobody
-
-Returns object of Nobody. It's object of L<RT::CurrentUser> class
-that represents a user who can own ticket and nothing else. See
-also L</InitSystemObjects>.
-
-=cut
-
-sub Nobody { return $Nobody }
-
-sub PrivilegedUsers {
- if (!$_Privileged) {
- $_Privileged = RT::Group->new(RT->SystemUser);
- $_Privileged->LoadSystemInternalGroup('Privileged');
- }
- return $_Privileged;
-}
-
-sub UnprivilegedUsers {
- if (!$_Unprivileged) {
- $_Unprivileged = RT::Group->new(RT->SystemUser);
- $_Unprivileged->LoadSystemInternalGroup('Unprivileged');
- }
- return $_Unprivileged;
-}
-
-
-=head2 Plugins
-
-Returns a listref of all Plugins currently configured for this RT instance.
-You can define plugins by adding them to the @Plugins list in your RT_SiteConfig
-
-=cut
-
-our @PLUGINS = ();
-sub Plugins {
- my $self = shift;
- unless (@PLUGINS) {
- $self->InitPluginPaths;
- @PLUGINS = $self->InitPlugins;
- }
- return \@PLUGINS;
-}
-
-=head2 PluginDirs
-
-Takes an optional subdir (e.g. po, lib, etc.) and returns a list of
-directories from plugins where that subdirectory exists.
-
-This code does not check plugin names, plugin validitity, or load
-plugins (see L</InitPlugins>) in any way, and requires that RT's
-configuration have been already loaded.
-
-=cut
-
-sub PluginDirs {
- my $self = shift;
- my $subdir = shift;
-
- require RT::Plugin;
-
- my @res;
- foreach my $plugin (grep $_, RT->Config->Get('Plugins')) {
- my $path = RT::Plugin->new( name => $plugin )->Path( $subdir );
- next unless -d $path;
- push @res, $path;
- }
- return @res;
-}
-
-=head2 InitPluginPaths
-
-Push plugins' lib paths into @INC right after F<local/lib>.
-In case F<local/lib> isn't in @INC, append them to @INC
-
-=cut
-
-sub InitPluginPaths {
- my $self = shift || __PACKAGE__;
-
- my @lib_dirs = $self->PluginDirs('lib');
-
- my @tmp_inc;
- my $added;
- for (@INC) {
- if ( Cwd::realpath($_) eq $RT::LocalLibPath) {
- push @tmp_inc, $_, @lib_dirs;
- $added = 1;
- } else {
- push @tmp_inc, $_;
- }
- }
-
- # append @lib_dirs in case $RT::LocalLibPath isn't in @INC
- push @tmp_inc, @lib_dirs unless $added;
-
- my %seen;
- @INC = grep !$seen{$_}++, @tmp_inc;
-}
-
-=head2 InitPlugins
-
-Initialize all Plugins found in the RT configuration file, setting up
-their lib and L<HTML::Mason> component roots.
-
-=cut
-
-sub InitPlugins {
- my $self = shift;
- my @plugins;
- require RT::Plugin;
- foreach my $plugin (grep $_, RT->Config->Get('Plugins')) {
- $plugin->require;
- die $UNIVERSAL::require::ERROR if ($UNIVERSAL::require::ERROR);
- push @plugins, RT::Plugin->new(name =>$plugin);
- }
- return @plugins;
-}
-
-
-sub InstallMode {
- my $self = shift;
- if (@_) {
- $_INSTALL_MODE = shift;
- if($_INSTALL_MODE) {
- require RT::CurrentUser;
- $SystemUser = RT::CurrentUser->new();
- }
- }
- return $_INSTALL_MODE;
-}
-
-sub LoadGeneratedData {
- my $class = shift;
- my $pm_path = ( File::Spec->splitpath( $INC{'RT.pm'} ) )[1];
-
- require "$pm_path/RT/Generated.pm" || die "Couldn't load RT::Generated: $@";
- $class->CanonicalizeGeneratedPaths();
-}
-
-sub CanonicalizeGeneratedPaths {
- my $class = shift;
- unless ( File::Spec->file_name_is_absolute($EtcPath) ) {
-
- # if BasePath exists and is absolute, we won't infer it from $INC{'RT.pm'}.
- # otherwise RT.pm will make the source dir(where we configure RT) be the
- # BasePath instead of the one specified by --prefix
- unless ( -d $BasePath
- && File::Spec->file_name_is_absolute($BasePath) )
- {
- my $pm_path = ( File::Spec->splitpath( $INC{'RT.pm'} ) )[1];
-
- # need rel2abs here is to make sure path is absolute, since $INC{'RT.pm'}
- # is not always absolute
- $BasePath = File::Spec->rel2abs(
- File::Spec->catdir( $pm_path, File::Spec->updir ) );
- }
-
- $BasePath = Cwd::realpath($BasePath);
-
- for my $path (
- qw/EtcPath BinPath SbinPath VarPath LocalPath LocalEtcPath
- LocalLibPath LexiconPath LocalLexiconPath PluginPath
- LocalPluginPath MasonComponentRoot MasonLocalComponentRoot
- MasonDataDir MasonSessionDir/
- )
- {
- no strict 'refs';
-
- # just change relative ones
- $$path = File::Spec->catfile( $BasePath, $$path )
- unless File::Spec->file_name_is_absolute($$path);
- }
- }
-
-}
-
-=head2 AddJavaScript
-
-helper method to add js files to C<JSFiles> config.
-to add extra css files, you can add the following line
-in the plugin's main file:
-
- RT->AddJavaScript( 'foo.js', 'bar.js' );
-
-=cut
-
-sub AddJavaScript {
- my $self = shift;
-
- my @old = RT->Config->Get('JSFiles');
- RT->Config->Set( 'JSFiles', @old, @_ );
- return RT->Config->Get('JSFiles');
-}
-
-=head2 AddStyleSheets
-
-helper method to add css files to C<CSSFiles> config
-
-to add extra css files, you can add the following line
-in the plugin's main file:
-
- RT->AddStyleSheets( 'foo.css', 'bar.css' );
-
-=cut
-
-sub AddStyleSheets {
- my $self = shift;
- my @old = RT->Config->Get('CSSFiles');
- RT->Config->Set( 'CSSFiles', @old, @_ );
- return RT->Config->Get('CSSFiles');
-}
-
-=head2 JavaScript
-
-helper method of RT->Config->Get('JSFiles')
-
-=cut
-
-sub JavaScript {
- return RT->Config->Get('JSFiles');
-}
-
-=head2 StyleSheets
-
-helper method of RT->Config->Get('CSSFiles')
-
-=cut
-
-sub StyleSheets {
- return RT->Config->Get('CSSFiles');
-}
-
-=head1 BUGS
-
-Please report them to rt-bugs@bestpractical.com, if you know what's
-broken and have at least some idea of what needs to be fixed.
-
-If you're not sure what's going on, report them rt-devel@lists.bestpractical.com.
-
-=head1 SEE ALSO
-
-L<RT::StyleGuide>
-L<DBIx::SearchBuilder>
-
-=cut
-
-require RT::Base;
-RT::Base->_ImportOverlays();
-
-1;
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-}
-
-use Getopt::Long;
-my %opt;
-GetOptions( \%opt, 'help|h', );
-
-my $id = shift;
-
-if ( $opt{help} || !$id ) {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
- exit;
-}
-
-require RT;
-RT::LoadConfig();
-RT::Init();
-
-require RT::Attribute;
-my $attr = RT::Attribute->new( RT->SystemUser );
-$attr->Load( $id );
-unless ( $attr->id ) {
- print STDERR "Couldn't load attribute #$id\n";
- exit 1;
-}
-
-my %res = ();
-$res{$_} = $attr->$_() foreach qw(ObjectType ObjectId Name Description Content ContentType);
-
-use Data::Dumper;
-print "Content of attribute #$id: ". Dumper( \%res );
-
-__END__
-
-=head1 NAME
-
-rt-attributes-viewer - show the content of an attribute
-
-=head1 SYNOPSIS
-
- # show the content of attribute 2
- rt-attributes-viewer 2
-
-=head1 DESCRIPTION
-
-This script deserializes and print content of an attribute defined
-by <attribute id>. May be useful for developers and for troubleshooting
-problems.
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-}
-
-use Getopt::Long;
-my %opt;
-GetOptions( \%opt, "older=s", "debug", "help|h", "skip-user" );
-
-
-if ( $opt{help} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
- exit;
-}
-
-
-if( $opt{'older'} ) {
- unless( $opt{'older'} =~ /^\s*([0-9]+)\s*(H|D|M|Y)?$/i ) {
- print STDERR "wrong format of the 'older' argumnet\n";
- exit(1);
- }
- my ($num,$unit) = ($1, uc($2 ||'D'));
- my %factor = ( H => 60*60 );
- $factor{'D'} = $factor{'H'}*24;
- $factor{'M'} = $factor{'D'}*31;
- $factor{'Y'} = $factor{'D'}*365;
- $opt{'older'} = $num * $factor{ $unit };
-}
-
-require RT;
-RT::LoadConfig();
-
-if( $opt{'debug'} ) {
- RT->Config->Set( LogToScreen => 'debug' );
-} else {
- RT->Config->Set( LogToScreen => undef );
-}
-
-RT::ConnectToDatabase();
-RT::InitLogging();
-
-require RT::Interface::Web::Session;
-
-my $alogoff = int RT->Config->Get('AutoLogoff');
-if ( $opt{'older'} or $alogoff ) {
- my $min;
- foreach ($alogoff*60, $opt{'older'}) {
- next unless $_;
- $min = $_ unless $min;
- $min = $_ if $_ < $min;
- }
-
- RT::Interface::Web::Session->ClearOld( $min );
-}
-
-RT::Interface::Web::Session->ClearByUser
- unless $opt{'skip-user'};
-
-exit(0);
-
-__END__
-
-=head1 NAME
-
-rt-clean-sessions - clean old and duplicate RT sessions
-
-=head1 SYNOPSIS
-
- rt-clean-sessions [--debug] [--older <NUM>[H|D|M|Y]]
-
- rt-clean-sessions
- rt-clean-sessions --debug
- rt-clean-sessions --older 10D
- rt-clean-sessions --debug --older 1M
- rt-clean-sessions --older 10D --skip-user
-
-=head1 DESCRIPTION
-
-Script cleans RT sessions from DB or dir with sessions data.
-Leaves in DB only one session per RT user and sessions that aren't older
-than specified(see options).
-
-Script is safe because data in the sessions is temporary and can be deleted.
-
-=head1 OPTIONS
-
-=over 4
-
-=item older
-
-Date interval in the C<< <NUM>[<unit>] >> format. Default unit is D(ays),
-H(our), M(onth) and Y(ear) are also supported.
-
-For example: C<rt-clean-sessions --older 1M> would delete all sessions that are
-older than 1 month.
-
-=item skip-user
-
-By default only one session per user left in the DB, so users that have
-sessions on multiple computers or in different browsers will be logged out.
-Use this option to avoid this.
-
-=item debug
-
-Turn on debug output.
-
-=back
-
-=head1 NOTES
-
-Functionality similar to this is implemented in
-html/Elements/SetupSessionCookie ; however, that does not guarantee
-that a session will be removed from disk and database soon after the
-timeout expires. This script, if run from a cron job, will ensure
-that the timed out sessions are actually removed from disk; the Mason
-component just ensures that the old sessions are not reusable before
-the cron job gets to them.
-
-=cut
+++ /dev/null
-#!/usr/bin/perl -w
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-
-# As we specify that XML is UTF-8 and we output it to STDOUT, we must be sure
-# it is UTF-8 so further XMLin will not break
-binmode( STDOUT, ":utf8" );
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ( "/opt/rt3/lib", "/opt/rt3/local/lib" );
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- } else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Getopt::Long;
-my %opt;
-GetOptions( \%opt, "help|h" );
-
-if ( $opt{help} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage( { verbose => 2 } );
- exit;
-}
-
-require RT;
-require XML::Simple;
-
-RT::LoadConfig();
-RT::Init();
-
-my $LocalOnly = @ARGV ? shift(@ARGV) : 1;
-
-my %RV;
-my %Ignore = (
- All => [
- qw(
- id Created Creator LastUpdated LastUpdatedBy
- )
- ],
- Templates => [
- qw(
- TranslationOf
- )
- ],
-);
-
-my $SystemUserId = RT->SystemUser->Id;
-my @classes = qw(
- Users Groups Queues ScripActions ScripConditions
- Templates Scrips ACL CustomFields
- );
-foreach my $class (@classes) {
- require "RT/$class.pm";
- my $objects = "RT::$class"->new( RT->SystemUser );
- $objects->{find_disabled_rows} = 1;
- $objects->UnLimit;
-
- if ( $class eq 'CustomFields' ) {
- $objects->OrderByCols(
- { FIELD => 'LookupType' },
- { FIELD => 'SortOrder' },
- { FIELD => 'Id' },
- );
- } else {
- $objects->OrderBy( FIELD => 'Id' );
- }
-
- if ($LocalOnly) {
- next if $class eq 'ACL'; # XXX - would go into infinite loop - XXX
- $objects->Limit(
- FIELD => 'LastUpdatedBy',
- OPERATOR => '!=',
- VALUE => $SystemUserId
- ) unless $class eq 'Groups';
- $objects->Limit(
- FIELD => 'Id',
- OPERATOR => '!=',
- VALUE => $SystemUserId
- ) if $class eq 'Users';
- $objects->Limit(
- FIELD => 'Domain',
- OPERATOR => '=',
- VALUE => 'UserDefined'
- ) if $class eq 'Groups';
- }
-
- my %fields;
- while ( my $obj = $objects->Next ) {
- next
- if $obj->can('LastUpdatedBy')
- and $obj->LastUpdatedBy == $SystemUserId;
-
- if ( !%fields ) {
- %fields = map { $_ => 1 } keys %{ $obj->_ClassAccessible };
- delete @fields{ @{ $Ignore{$class} ||= [] },
- @{ $Ignore{All} ||= [] }, };
- }
-
- my $rv;
-
- # next if $obj-> # skip default names
- foreach my $field ( sort keys %fields ) {
- my $value = $obj->__Value($field);
- $rv->{$field} = $value if ( defined($value) && length($value) );
- }
- delete $rv->{Disabled} unless $rv->{Disabled};
-
- foreach my $record ( map { /ACL/ ? 'ACE' : substr( $_, 0, -1 ) }
- @classes )
- {
- foreach my $key ( map "$record$_", ( '', 'Id' ) ) {
- next unless exists $rv->{$key};
- my $id = $rv->{$key} or next;
- my $obj = "RT::$record"->new( RT->SystemUser );
- $obj->LoadByCols( Id => $id ) or next;
- $rv->{$key} = $obj->__Value('Name') || 0;
- }
- }
-
- if ( $class eq 'Users' and defined $obj->Privileged ) {
- $rv->{Privileged} = int( $obj->Privileged );
- } elsif ( $class eq 'CustomFields' ) {
- my $values = $obj->Values;
- while ( my $value = $values->Next ) {
- push @{ $rv->{Values} }, {
- map { ( $_ => $value->__Value($_) ) }
- qw(
- Name Description SortOrder
- ),
- };
- }
- }
-
- if ( eval { require RT::Attributes; 1 } ) {
- my $attributes = $obj->Attributes;
- while ( my $attribute = $attributes->Next ) {
- my $content = $attribute->Content;
- $rv->{Attributes}{ $attribute->Name } = $content
- if length($content);
- }
- }
-
- push @{ $RV{$class} }, $rv;
- }
-}
-
-print(<< ".");
-no strict; use XML::Simple; *_ = XMLin(do { local \$/; readline(DATA) }, ForceArray => [qw(
- @classes Values
-)], NoAttr => 1, SuppressEmpty => ''); *\$_ = (\$_{\$_} || []) for keys \%_; 1; # vim: ft=xml
-__DATA__
-.
-
-print XML::Simple::XMLout(
- { map { ( $_ => ( $RV{$_} || [] ) ) } @classes },
- RootName => 'InitialData',
- NoAttr => 1,
- SuppressEmpty => '',
- XMLDecl => '<?xml version="1.0" encoding="UTF-8"?>',
-);
-
-__END__
-
-=head1 NAME
-
-rt-dump-metadata - dump configuration metadata from an RT database
-
-=head1 SYNOPSIS
-
- rt-dump-metdata [ 0 ]
-
-=head1 DESCRIPTION
-
-C<rt-dump-metadata> is a tool that dumps configuration metadata from the
-Request Tracker database into XML format, suitable for feeding into
-C<rt-setup-database>. To dump and load a full RT database, you should generally
-use the native database tools instead, as well as performing any necessary
-steps from UPGRADING.
-
-When run without arguments, the metadata dump will only include 'local'
-configuration changes, i.e. those done manually in the web interface.
-
-When run with the argument '0', the dump will include all configuration
-metadata.
-
-This is NOT a tool for backing up an RT database.
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-# Read in the options
-my %opts;
-use Getopt::Long;
-GetOptions( \%opts,
- "help|h", "dryrun", "time=i", "epoch=i", "all"
-);
-
-if ($opts{'help'}) {
- require Pod::Usage;
- print Pod::Usage::pod2usage(-verbose => 2);
- exit;
-}
-
-require RT;
-require RT::Interface::CLI;
-RT::Interface::CLI->import(qw{ CleanEnv loc });
-
-# Clean out all the nasties from the environment
-CleanEnv();
-
-# Load the config file
-RT::LoadConfig();
-
-# Connect to the database and get RT::SystemUser and RT::Nobody loaded
-RT::Init();
-
-require RT::Dashboard::Mailer;
-RT::Dashboard::Mailer->MailDashboards(
- All => $opts{all},
- DryRun => $opts{dryrun},
- Time => ($opts{time} || $opts{epoch} || time), # epoch is the old-style
- Opts => \%opts,
-);
-
-=head1 NAME
-
-rt-email-dashboards - Send email dashboards
-
-=head1 SYNOPSIS
-
- rt-email-dashboards [options]
-
-=head1 DESCRIPTION
-
-This tool will send users email based on how they have subscribed to
-dashboards. A dashboard is a set of saved searches, the subscription controls
-how often that dashboard is sent and how it's displayed.
-
-Each subscription has an hour, and possibly day of week or day of month. These
-are taken to be in the user's timezone if available, UTC otherwise.
-
-=head1 SETUP
-
-You'll need to have cron run this script every hour. Here's an example crontab
-entry to do this.
-
- 0 * * * * /usr/bin/perl /opt/rt4/local/sbin/rt-email-dashboards
-
-This will run the script every hour on the hour. This may need some further
-tweaking to be run as the correct user.
-
-=head1 OPTIONS
-
-This tool supports a few options. Most are for debugging.
-
-=over 8
-
-=item -h
-
-=item --help
-
-Display this documentation
-
-=item --dryrun
-
-Figure out which dashboards would be sent, but don't actually generate or email
-any of them
-
-=item --time SECONDS
-
-Instead of using the current time to figure out which dashboards should be
-sent, use SECONDS (usually since midnight Jan 1st, 1970, so C<1192216018> would
-be Oct 12 19:06:58 GMT 2007).
-
-=item --epoch SECONDS
-
-Back-compat for --time SECONDS.
-
-=item --all
-
-Ignore subscription frequency when considering each dashboard (should only be
-used with --dryrun for testing and debugging)
-
-=back
-
-=cut
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use warnings;
-use strict;
-
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Date::Format qw( strftime );
-use Getopt::Long;
-use RT;
-use RT::Interface::CLI qw( CleanEnv loc );
-use RT::Interface::Email;
-
-CleanEnv();
-RT::LoadConfig();
-RT::Init();
-
-sub usage {
- my ($error) = @_;
- print loc("Usage:") . " $0 -m (daily|weekly) [--print] [--help]\n";
- print loc(
- "[_1] is a utility, meant to be run from cron, that dispatches all deferred RT notifications as a per-user digest.",
- $0
- ) . "\n";
- print "\n\t-m, --mode\t"
- . loc("Specify whether this is a daily or weekly run.") . "\n";
- print "\t-p, --print\t"
- . loc("Print the resulting digest messages to STDOUT; don't mail them. Do not mark them as sent")
- . "\n";
- print "\t-h, --help\t" . loc("Print this message") . "\n";
-
- if ( $error eq 'help' ) {
- exit 0;
- } else {
- print loc("Error") . ": " . loc($error) . "\n";
- exit 1;
- }
-}
-
-my ( $frequency, $print, $help ) = ( '', '', '' );
-GetOptions(
- 'mode=s' => \$frequency,
- 'print' => \$print,
- 'help' => \$help,
-);
-
-usage('help') if $help;
-usage("Mode argument must be 'daily' or 'weekly'")
- unless $frequency =~ /^(daily|weekly)$/;
-
-run( $frequency, $print );
-
-sub run {
- my $frequency = shift;
- my $print = shift;
-
-## Find all the tickets that have been modified within the time frame
-## described by $frequency.
-
- my ( $all_digest, $sent_transactions ) = find_transactions($frequency);
-
-## Iterate through our huge hash constructing the digest message
-## for each user and sending it.
-
- foreach my $user ( keys %$all_digest ) {
- my ( $contents_list, $contents_body ) = build_digest_for_user( $user, $all_digest->{$user} );
- # Now we have a content head and a content body. We can send a message.
- if ( send_digest( $user, $contents_list, $contents_body ) ) {
- print "Sent message to $user\n";
- mark_transactions_sent( $frequency, $user, values %{$sent_transactions->{$user}} ) unless ($print);
- } else {
- print "Failed to send message to $user\n";
- }
- }
-}
-exit 0;
-
-# Subroutines.
-
-sub send_digest {
- my ( $to, $index, $messages ) = @_;
-
- # Combine the index and the messages.
-
- my $body = "============== Tickets with activity in the last "
- . ( $frequency eq 'daily' ? "day" : "seven days" ) . "\n\n";
-
- $body .= $index;
- $body .= "\n\n============== Messages recorded in the last "
- . ( $frequency eq 'daily' ? "day" : "seven days" ) . "\n\n";
- $body .= $messages;
-
- # Load our template. If we cannot load the template, abort
- # immediately rather than failing through many loops.
- my $digest_template = RT::Template->new( RT->SystemUser );
- my ( $ret, $msg ) = $digest_template->Load('Email Digest');
- unless ($ret) {
- print loc("Failed to load template")
- . " 'Email Digest': "
- . $msg
- . ". Cannot continue.\n";
- exit 1;
- }
- ( $ret, $msg ) = $digest_template->Parse( Argument => $body );
- unless ($ret) {
- print loc("Failed to parse template")
- . " 'Email Digest'. Cannot continue.\n";
- exit 1;
- }
-
- # Set our sender and recipient.
- $digest_template->MIMEObj->head->replace( 'From', RT::Config->Get('CorrespondAddress') );
- $digest_template->MIMEObj->head->replace( 'To', $to );
-
- if ($print) {
- $digest_template->MIMEObj->print;
- return 1;
- } else {
- return RT::Interface::Email::SendEmail( Entity => $digest_template->MIMEObj)
- }
-}
-
-# =item mark_transactions_sent( $frequency, $user, @txn_list );
-#
-# Takes a frequency string (either 'daily' or 'weekly'), a user and one or more
-# transaction objects as its arguments. Marks the given deferred
-# notifications as sent.
-#
-# =cut
-
-sub mark_transactions_sent {
- my ( $freq, $user, @txns ) = @_;
- return unless $freq =~ /(daily|weekly)/;
- return unless @txns;
- foreach my $txn (@txns) {
-
- # Grab the attribute, mark the "sent" as true, and store the new
- # value.
- if ( my $attr = $txn->FirstAttribute('DeferredRecipients') ) {
- my $deferred = $attr->Content;
- $deferred->{$freq}->{$user}->{'_sent'} = 1;
- $txn->SetAttribute(
- Name => 'DeferredRecipients',
- Description => 'Deferred recipients for this message',
- Content => $deferred,
- );
- }
- }
-}
-
-sub since_date {
- my $frequency = shift;
-
- # Specify a short time for digest overlap, in case we aren't starting
- # this process exactly on time.
- my $OVERLAP_HEDGE = -30;
-
- my $since_date = RT::Date->new( RT->SystemUser );
- $since_date->Set( Format => 'unix', Value => time() );
- if ( $frequency eq 'daily' ) {
- $since_date->AddDays(-1);
- } else {
- $since_date->AddDays(-7);
- }
-
- $since_date->AddSeconds($OVERLAP_HEDGE);
-
- return $since_date;
-}
-
-sub find_transactions {
- my $frequency = shift;
- my $since_date = since_date($frequency);
-
- my $txns = RT::Transactions->new( RT->SystemUser );
-
- # First limit to recent transactions.
- $txns->Limit(
- FIELD => 'Created',
- OPERATOR => '>',
- VALUE => $since_date->ISO
- );
-
- # Next limit to ticket transactions.
- $txns->Limit(
- FIELD => 'ObjectType',
- OPERATOR => '=',
- VALUE => 'RT::Ticket',
- ENTRYAGGREGATOR => 'AND'
- );
- my $all_digest = {};
- my $sent_transactions = {};
-
- while ( my $txn = $txns->Next ) {
- my $ticket = $txn->Ticket;
- my $queue = $txn->TicketObj->QueueObj->Name;
- # Xxx todo - may clobber if two queues have the same name
- foreach my $user ( $txn->DeferredRecipients($frequency) ) {
- $all_digest->{$user}->{$queue}->{$ticket}->{ $txn->id } = $txn->ContentObj;
- $sent_transactions->{$user}->{ $txn->id } = $txn;
- }
- }
-
- return ( $all_digest, $sent_transactions );
-}
-
-sub build_digest_for_user {
- my $user = shift;
- my $user_digest = shift;
-
- my $contents_list = ''; # Holds the digest index.
- my $contents_body = ''; # Holds the digest body.
-
- # Has the user been disabled since a message was deferred on his/her
- # behalf?
- my $user_obj = RT::User->new( RT->SystemUser );
- $user_obj->LoadByEmail($user);
- if ( $user_obj->PrincipalObj->Disabled ) {
- print STDERR loc("Skipping disabled user") . " $user\n";
- next;
- }
-
- print loc("Message for user") . " $user:\n\n" if $print;
- foreach my $queue ( keys %$user_digest ) {
- $contents_list .= "Queue $queue:\n";
- $contents_body .= "Queue $queue:\n";
- foreach my $ticket ( sort keys %{ $user_digest->{$queue} } ) {
- my $tkt_txns = $user_digest->{$queue}->{$ticket};
- my $ticket_obj = RT::Ticket->new( RT->SystemUser );
- $ticket_obj->Load($ticket);
-
- # Spit out the index entry for this ticket.
- my $ticket_title = sprintf(
- "#%d %s [%s]\t%s\n",
- $ticket, $ticket_obj->Status, $ticket_obj->OwnerObj->Name,
- $ticket_obj->Subject
- );
- $contents_list .= $ticket_title;
-
- # Spit out the messages for the transactions on this ticket.
- $contents_body .= "\n== $ticket_title\n";
- foreach my $txn ( sort keys %$tkt_txns ) {
- my $msg = $tkt_txns->{$txn};
-
- # $msg contains an RT::Attachment with our outgoing
- # message. Print a few headers for clarity's sake.
- $contents_body .= "From: " . $msg->GetHeader('From') . "\n";
- my $date = $msg->GetHeader('Date ');
- unless ($date) {
- my $txn_obj = RT::Transaction->new( RT->SystemUser );
- $txn_obj->Load($txn);
- my $date_obj = RT::Date->new( RT->SystemUser );
- $date_obj->Set(
- Format => 'sql',
- Value => $txn_obj->Created
- );
- $date = strftime( '%a, %d %b %Y %H:%M:%S %z',
- @{ [ localtime( $date_obj->Unix ) ] } );
- }
- $contents_body .= "Date: $date\n\n";
- $contents_body .= $msg->Content . "\n";
- $contents_body .= "-------\n";
- } # foreach transaction
- } # foreach ticket
- } # foreach queue
-
- return ( $contents_list, $contents_body );
-
-}
-
-__END__
-
-=head1 NAME
-
-rt-email-digest - dispatch deferred notifications as a per-user digest
-
-=head1 SYNOPSIS
-
- rt-email-digest -m (daily|weekly) [--print] [--help]
-
-=head1 DESCRIPTION
-
-This script is a tool to dispatch all deferred RT notifications as a per-user
-object.
-
-=head1 OPTIONS
-
-=over
-
-=item mode
-
-Specify whether this is a daily or weekly run.
-
---mode is equal to -m
-
-=item print
-
-Print the resulting digest messages to STDOUT; don't mail them. Do not mark them as sent
-
---print is equal to -p
-
-=item help
-
-Print this message
-
---help is equal to -h
-
-=back
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-=head1 NAME
-
-rt-email-group-admin - Command line tool for administrating NotifyGroup actions
-
-=head1 SYNOPSIS
-
- rt-email-group-admin --list
- rt-email-group-admin --create 'Notify foo team' --group Foo
- rt-email-group-admin --create 'Notify foo team as comment' --comment --group Foo
- rt-email-group-admin --create 'Notify group Foo and Bar' --group Foo --group Bar
- rt-email-group-admin --create 'Notify user foo@bar.com' --user foo@bar.com
- rt-email-group-admin --create 'Notify VIPs' --user vip1@bar.com
- rt-email-group-admin --add 'Notify VIPs' --user vip2@bar.com --group vip1 --user vip3@foo.com
- rt-email-group-admin --rename 'Notify VIPs' --newname 'Inform VIPs'
- rt-email-group-admin --switch 'Notify VIPs'
- rt-email-group-admin --delete 'Notify user foo@bar.com'
-
-=head1 DESCRIPTION
-
-This script list, create, modify or delete scrip actions in the RT DB. Once
-you've created an action you can use it in a scrip.
-
-For example you can create the following action using this script:
-
- rt-email-group-admin --create 'Notify developers' --group 'Development Team'
-
-Then you can add the followoing scrip to your Bugs queue:
-
- Condition: On Create
- Action: Notify developers
- Template: Transaction
- Stage: TransactionCreate
-
-Your development team will be notified on every new ticket in the queue.
-
-=cut
-
-use warnings;
-use strict;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Getopt::Long qw(GetOptions);
-Getopt::Long::Configure( "pass_through" );
-
-our $cmd = 'usage';
-our $opts = {};
-
-sub parse_args {
- my $tmp;
- if ( GetOptions( 'list' => \$tmp ) && $tmp ) {
- $cmd = 'list';
- }
- elsif ( GetOptions( 'create=s' => \$tmp ) && $tmp ) {
- $cmd = 'create';
- $opts->{'name'} = $tmp;
- $opts->{'groups'} = [];
- $opts->{'users'} = [];
- GetOptions( 'comment' => \$opts->{'comment'} );
- GetOptions( 'group:s@' => $opts->{'groups'} );
- GetOptions( 'user:s@' => $opts->{'users'} );
- unless ( @{ $opts->{'users'} } + @{ $opts->{'groups'} } ) {
- usage();
- exit(-1);
- }
- }
- elsif ( GetOptions( 'add=s' => \$tmp ) && $tmp ) {
- $cmd = 'add';
- $opts->{'name'} = $tmp;
- $opts->{'groups'} = [];
- $opts->{'users'} = [];
- GetOptions( 'group:s@' => $opts->{'groups'} );
- GetOptions( 'user:s@' => $opts->{'users'} );
- unless ( @{ $opts->{'users'} } + @{ $opts->{'groups'} } ) {
- usage();
- exit(-1);
- }
- }
- elsif ( GetOptions( 'switch=s' => \$tmp ) && $tmp ) {
- $cmd = 'switch';
- $opts->{'name'} = $tmp;
- }
- elsif ( GetOptions( 'rename=s' => \$tmp ) && $tmp ) {
- $cmd = 'rename';
- $opts->{'name'} = $tmp;
- GetOptions( 'newname=s' => \$opts->{'newname'} );
- unless ( $opts->{'newname'} ) {
- usage();
- exit(-1);
- }
- }
- elsif ( GetOptions( 'delete=s' => \$tmp ) && $tmp) {
- $cmd = 'delete';
- $opts->{'name'} = $tmp;
- } else {
- $cmd = 'usage';
- }
-
- return;
-}
-
-sub usage {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
-}
-
-my $help;
-if ( GetOptions( 'help|h' => \$help ) && $help ) {
- usage();
- exit;
-}
-
-parse_args();
-
-require RT;
-RT->LoadConfig;
-RT->Init;
-
-require RT::Principal;
-require RT::User;
-require RT::Group;
-require RT::ScripActions;
-
-
-{
- eval "main::$cmd()";
- if ( $@ ) {
- print STDERR $@ ."\n";
- }
-}
-
-exit(0);
-
-=head1 USAGE
-
-rt-email-group-admin --COMMAND ARGS
-
-=head1 COMMANDS
-
-=head2 list
-
-Lists actions and its descriptions.
-
-=cut
-
-sub list {
- my $actions = _get_our_actions();
- while( my $a = $actions->Next ) {
- _list( $a );
- }
- return;
-}
-
-sub _list {
- my $action = shift;
-
- print "Name: ". $action->Name() ."\n";
- print "Module: ". $action->ExecModule() ."\n";
-
- my @princ = argument_to_list( $action );
-
- print "Members: \n";
- foreach( @princ ) {
- my $obj = RT::Principal->new( RT->SystemUser );
- $obj->Load( $_ );
- next unless $obj->id;
-
- print "\t". $obj->PrincipalType;
- print "\t=> ". $obj->Object->Name;
- print "(Disabled!!!)" if $obj->Disabled;
- print "\n";
- }
- print "\n";
- return;
-}
-
-=head2 create NAME [--comment] [--group GNAME] [--user UNAME]
-
-Creates new action with NAME and adds users and/or groups to its
-recipient list. Would be notify as comment if --comment specified.
-
-=cut
-
-sub create {
- my $actions = RT::ScripActions->new( RT->SystemUser );
- $actions->Limit(
- FIELD => 'Name',
- VALUE => $opts->{'name'},
- );
- if ( $actions->Count ) {
- print STDERR "ScripAction '". $opts->{'name'} ."' allready exists\n";
- exit(-1);
- }
-
- my @groups = _check_groups( @{ $opts->{'groups'} } );
- my @users = _check_users( @{ $opts->{'users'} } );
- unless ( @users + @groups ) {
- print STDERR "List of groups and users is empty\n";
- exit(-1);
- }
-
- my $action = __create_empty( $opts->{'name'}, $opts->{'comment'} );
-
- __add( $action, $_ ) foreach( @users );
- __add( $action, $_ ) foreach( @groups );
-
- return;
-}
-
-sub __create_empty {
- my $name = shift;
- my $as_comment = shift || 0;
- require RT::ScripAction;
- my $action = RT::ScripAction->new( RT->SystemUser );
- $action->Create(
- Name => $name,
- Description => "Created with rt-email-group-admin script",
- ExecModule => $as_comment? 'NotifyGroupAsComment': 'NotifyGroup',
- Argument => '',
- );
-
- return $action;
-}
-
-sub _check_groups
-{
- return grep { $_ ? 1: do { print STDERR "Group '$_' skipped, doesn't exist\n"; 0; } }
- map { __check_group($_) } @_;
-}
-
-sub __check_group
-{
- my $instance = shift;
- require RT::Group;
- my $obj = RT::Group->new( RT->SystemUser );
- $obj->LoadUserDefinedGroup( $instance );
- return $obj->id ? $obj : undef;
-}
-
-sub _check_users
-{
- return grep { $_ ? 1: do { print STDERR "User '$_' skipped, doesn't exist\n"; 0; } }
- map { __check_user($_) } @_;
-}
-
-sub __check_user
-{
- my $instance = shift;
- require RT::User;
- my $obj = RT::User->new( RT->SystemUser );
- $obj->Load( $instance );
- return $obj->id ? $obj : undef;
-}
-
-=head2 add NAME [--group GNAME] [--user UNAME]
-
-Adds groups and/or users to recipients of the action NAME.
-
-=cut
-
-sub add {
- my $action = _get_action_by_name( $opts->{'name'} );
- unless ( $action ) {
- print STDERR "ScripAction '". $opts->{'name'} ."' doesn't exist\n";
- exit(-1);
- }
-
- my @groups = _check_groups( @{ $opts->{'groups'} } );
- my @users = _check_users( @{ $opts->{'users'} } );
-
- unless ( @users + @groups ) {
- print STDERR "List of groups and users is empty\n";
- exit(-1);
- }
-
- __add( $action, $_ ) foreach @users;
- __add( $action, $_ ) foreach @groups;
-
- return;
-}
-
-sub __add
-{
- my $action = shift;
- my $obj = shift;
-
- my @cur = argument_to_list( $action );
-
- my $id = $obj->id;
- return if grep $_ == $id, @cur;
-
- push @cur, $id;
-
- return $action->__Set( Field => 'Argument', Value => join(',', @cur) );
-}
-
-=head2 delete NAME
-
-Deletes action NAME if scrips doesn't use it.
-
-=cut
-
-sub delete {
- my $action = _get_action_by_name( $opts->{'name'} );
- unless ( $action ) {
- print STDERR "ScripAction '". $opts->{'name'} ."' doesn't exist\n";
- exit(-1);
- }
-
- require RT::Scrips;
- my $scrips = RT::Scrips->new( RT->SystemUser );
- $scrips->Limit( FIELD => 'ScripAction', VALUE => $action->id );
- if ( $scrips->Count ) {
- my @sid;
- while( my $s = $scrips->Next ) {
- push @sid, $s->id;
- }
- print STDERR "ScripAction '". $opts->{'name'} ."'"
- . " is in use by Scrip(s) ". join( ", ", map "#$_", @sid )
- . "\n";
- exit(-1);
- }
-
- return __delete( $action );
-}
-
-sub __delete {
- require DBIx::SearchBuilder::Record;
- return DBIx::SearchBuilder::Record::Delete( shift );
-}
-
-sub _get_action_by_name {
- my $name = shift;
- my $actions = _get_our_actions();
- $actions->Limit(
- FIELD => 'Name',
- VALUE => $name
- );
-
- if ( $actions->Count > 1 ) {
- print STDERR "More then one ScripAction with name '$name'\n";
- }
-
- return $actions->First;
-}
-
-=head2 switch NAME
-
-Switch action NAME from notify as correspondence to comment and back.
-
-=cut
-
-sub switch {
- my $action = _get_action_by_name( $opts->{'name'} );
- unless ( $action ) {
- print STDERR "ScripAction '". $opts->{'name'} ."' doesn't exist\n";
- exit(-1);
- }
-
- my %h = (
- NotifyGroup => 'NotifyGroupAsComment',
- NotifyGroupAsComment => 'NotifyGroup'
- );
-
- return $action->__Set(
- Field => 'ExecModule',
- Value => $h{ $action->ExecModule }
- );
-}
-
-=head2 rename NAME --newname NEWNAME
-
-Renames action NAME to NEWNAME.
-
-=cut
-
-sub rename {
- my $action = _get_action_by_name( $opts->{'name'} );
- unless ( $action ) {
- print STDERR "ScripAction '". $opts->{'name'} ."' doesn't exist\n";
- exit(-1);
- }
-
- my $actions = RT::ScripActions->new( RT->SystemUser );
- $actions->Limit( FIELD => 'Name', VALUE => $opts->{'newname'} );
- if ( $actions->Count ) {
- print STDERR "ScripAction '". $opts->{'newname'} ."' allready exists\n";
- exit(-1);
- }
-
- return $action->__Set(
- Field => 'Name',
- Value => $opts->{'newname'},
- );
-}
-
-=head2 NOTES
-
-If command has option --group or --user then you can use it more then once,
-if other is not specified.
-
-=cut
-
-###############
-#### Utils ####
-###############
-
-sub argument_to_list {
- my $action = shift;
- require RT::Action::NotifyGroup;
- return RT::Action::NotifyGroup->__SplitArg( $action->Argument );
-}
-
-sub _get_our_actions {
- my $actions = RT::ScripActions->new( RT->SystemUser );
- $actions->Limit(
- FIELD => 'ExecModule',
- VALUE => 'NotifyGroup',
- ENTRYAGGREGATOR => 'OR',
- );
- $actions->Limit(
- FIELD => 'ExecModule',
- VALUE => 'NotifyGroupAsComment',
- ENTRYAGGREGATOR => 'OR',
- );
-
- return $actions;
-}
-
-=head1 AUTHOR
-
-Ruslan U. Zakirov E<lt>ruz@bestpractical.comE<gt>
-
-=head1 SEE ALSO
-
-L<RT::Action::NotifyGroup>, L<RT::Action::NotifyGroupAsComment>
-
-=cut
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-}
-
-use Getopt::Long;
-my %opt;
-GetOptions( \%opt, 'help|h', 'user|u=s', 'option|o=s' );
-
-if ( $opt{help} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
- exit;
-}
-
-require RT;
-RT::LoadConfig();
-RT::Init();
-
-require RT::Attributes;
-my $attrs = RT::Attributes->new( RT->SystemUser );
-$attrs->Limit( FIELD => 'Name', VALUE => 'Pref-RT::System-1' );
-$attrs->Limit( FIELD => 'ObjectType', VALUE => 'RT::User' );
-
-if ($opt{user}) {
- my $user = RT::User->new( RT->SystemUser );
- my ($val, $msg) = $user->Load($opt{user});
- unless ($val) {
- RT->Logger->error("Unable to load $opt{user}: $msg");
- exit(1);
- }
- $attrs->Limit( FIELD => 'ObjectId', VALUE => $user->Id );
-}
-
-use Data::Dumper;
-$Data::Dumper::Terse = 1;
-
-while (my $attr = $attrs->Next ) {
- my $user = RT::User->new( RT->SystemUser );
- my ($val, $msg) = $user->Load($attr->ObjectId);
- unless ($val) {
- RT->Logger->warn("Unable to load User ".$attr->ObjectId." $msg");
- next;
- }
- next if $user->Disabled;
-
- my $content = $attr->Content;
- if ( my $config_name = $opt{option} ) {
- if ( exists $content->{$config_name} ) {
- my $setting = $content->{$config_name};
- print $user->Name, "\t$config_name: $setting\n";
- }
- } else {
- print $user->Name, " => ", Dumper($content);
- }
-
-}
-
-__END__
-
-=head1 NAME
-
-rt-preferences-viewer - show user defined preferences
-
-=head1 SYNOPSIS
-
- rt-preferences-viewer
-
- rt-preferences-viewer --user=falcone
- show only the falcone user's preferences
-
- rt-preferences-viewer --option=EmailFrequency
- show users who have set the EmailFrequence config option
-
-=head1 DESCRIPTION
-
-This script shows user settings of preferences. If a user is using the system
-default, it will not be listed. You can limit to a user name or id or to users
-with a particular option set.
+++ /dev/null
-#!/usr/bin/perl -w
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use warnings;
-use strict;
-
-# fix lib paths, some may be relative
-BEGIN {
- die <<EOT if ${^TAINT};
-RT does not run under Perl's "taint mode". Remove -T from the command
-line, or remove the PerlTaintCheck parameter from your mod_perl
-configuration.
-EOT
-
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Getopt::Long;
-no warnings 'once';
-
-if (grep { m/help/ } @ARGV) {
- require Pod::Usage;
- print Pod::Usage::pod2usage( { verbose => 2 } );
- exit;
-}
-
-require RT;
-RT->LoadConfig();
-require Module::Refresh if RT->Config->Get('DevelMode');
-
-require RT::Handle;
-my ($integrity, $state, $msg) = RT::Handle->CheckIntegrity;
-
-unless ( $integrity ) {
- print STDERR <<EOF;
-
-RT couldn't connect to the database where tickets are stored.
-If this is a new installation of RT, you should visit the URL below
-to configure RT and initialize your database.
-
-If this is an existing RT installation, this may indicate a database
-connectivity problem.
-
-The error RT got back when trying to connect to your database was:
-
-$msg
-
-EOF
-
- require RT::Installer;
- # don't enter install mode if the file exists but is unwritable
- if (-e RT::Installer->ConfigFile && !-w _) {
- die 'Since your configuration exists ('
- . RT::Installer->ConfigFile
- . ") but is not writable, I'm refusing to do anything.\n";
- }
-
- RT->Config->Set( 'LexiconLanguages' => '*' );
- RT::I18N->Init;
-
- RT->InstallMode(1);
-} else {
- RT->Init();
-
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'post');
- unless ( $status ) {
- print STDERR $msg, "\n\n";
- exit -1;
- }
-}
-
-# we must disconnect DB before fork
-if ($RT::Handle) {
- $RT::Handle->dbh(undef);
- undef $RT::Handle;
-}
-
-require RT::Interface::Web::Handler;
-my $app = RT::Interface::Web::Handler->PSGIApp;
-
-if ($ENV{RT_TESTING}) {
- my $screen_logger = $RT::Logger->remove('screen');
- require Log::Dispatch::Perl;
- $RT::Logger->add(
- Log::Dispatch::Perl->new(
- name => 'rttest',
- min_level => $screen_logger->min_level,
- action => {
- error => 'warn',
- critical => 'warn'
- }
- )
- );
- require Plack::Middleware::Test::StashWarnings;
- $app = Plack::Middleware::Test::StashWarnings->wrap($app);
-}
-
-# when used as a psgi file
-if (caller) {
- return $app;
-}
-
-
-# load appropriate server
-
-require Plack::Runner;
-
-my $is_fastcgi = $0 =~ m/fcgi$/;
-my $r = Plack::Runner->new( $0 =~ 'standalone' ? ( server => 'Standalone' ) :
- $is_fastcgi ? ( server => 'FCGI' )
- : (),
- env => 'deployment' );
-
-# figure out the port
-my $port;
-
-# handle "rt-server 8888" for back-compat, but complain about it
-if ($ARGV[0] && $ARGV[0] =~ m/^\d+$/) {
- warn "Deprecated: please run $0 --port $ARGV[0] instead\n";
- unshift @ARGV, '--port';
-}
-
-my @args = @ARGV;
-
-use List::MoreUtils 'last_index';
-my $last_index = last_index { $_ eq '--port' } @args;
-
-my $explicit_port;
-
-if ( $last_index != -1 && $args[$last_index+1] =~ /^\d+$/ ) {
- $explicit_port = $args[$last_index+1];
- $port = $explicit_port;
-
- # inform the rest of the system what port we manually chose
- my $old_app = $app;
- $app = sub {
- my $env = shift;
-
- $env->{'rt.explicit_port'} = $port;
-
- $old_app->($env, @_);
- };
-}
-else {
- # default to the configured WebPort and inform Plack::Runner
- $port = RT->Config->Get('WebPort') || '8080';
- push @args, '--port', $port;
-}
-
-push @args, '--server', 'Standalone' if RT->InstallMode;
-push @args, '--server', 'Starlet' unless $r->{server} || grep { m/--server/ } @args;
-
-$r->parse_options(@args);
-
-delete $r->{options} if $is_fastcgi; ### mangle_host_port_socket ruins everything
-
-unless ($r->{env} eq 'development') {
- push @{$r->{options}}, server_ready => sub {
- my($args) = @_;
- my $name = $args->{server_software} || ref($args); # $args is $server
- my $host = $args->{host} || 0;
- my $proto = $args->{proto} || 'http';
- print STDERR "$name: Accepting connections at $proto://$host:$args->{port}/\n";
- };
-}
-eval { $r->run($app) };
-if (my $err = $@) {
- handle_startup_error($err);
-}
-
-exit 0;
-
-sub handle_startup_error {
- my $err = shift;
- if ( $err =~ /listen/ ) {
- handle_bind_error();
- } else {
- die
- "Something went wrong while trying to run RT's standalone web server:\n\t"
- . $err;
- }
-}
-
-
-sub handle_bind_error {
-
- print STDERR <<EOF;
-WARNING: RT couldn't start up a web server on port @{[$port]}.
-This is often the case if the port is already in use or you're running @{[$0]}
-as someone other than your system's "root" user. You may also specify a
-temporary port with: $0 --port <port>
-EOF
-
- if ($explicit_port) {
- print STDERR
- "Please check your system configuration or choose another port\n\n";
- }
-}
-
-__END__
-
-=head1 NAME
-
-rt-server - RT standalone server
-
-=head1 SYNOPSIS
-
- # runs prefork server listening on port 8080, requires Starlet
- rt-server --port 8080
-
- # runs server listening on port 8080
- rt-server --server Standalone --port 8080
- # or
- standalone_httpd --port 8080
-
- # runs other PSGI server on port 8080
- rt-server --server Starman --port 8080
+++ /dev/null
-#!/usr/bin/perl -w
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use warnings;
-use strict;
-
-# fix lib paths, some may be relative
-BEGIN {
- die <<EOT if ${^TAINT};
-RT does not run under Perl's "taint mode". Remove -T from the command
-line, or remove the PerlTaintCheck parameter from your mod_perl
-configuration.
-EOT
-
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Getopt::Long;
-no warnings 'once';
-
-if (grep { m/help/ } @ARGV) {
- require Pod::Usage;
- print Pod::Usage::pod2usage( { verbose => 2 } );
- exit;
-}
-
-require RT;
-RT->LoadConfig();
-require Module::Refresh if RT->Config->Get('DevelMode');
-
-require RT::Handle;
-my ($integrity, $state, $msg) = RT::Handle->CheckIntegrity;
-
-unless ( $integrity ) {
- print STDERR <<EOF;
-
-RT couldn't connect to the database where tickets are stored.
-If this is a new installation of RT, you should visit the URL below
-to configure RT and initialize your database.
-
-If this is an existing RT installation, this may indicate a database
-connectivity problem.
-
-The error RT got back when trying to connect to your database was:
-
-$msg
-
-EOF
-
- require RT::Installer;
- # don't enter install mode if the file exists but is unwritable
- if (-e RT::Installer->ConfigFile && !-w _) {
- die 'Since your configuration exists ('
- . RT::Installer->ConfigFile
- . ") but is not writable, I'm refusing to do anything.\n";
- }
-
- RT->Config->Set( 'LexiconLanguages' => '*' );
- RT::I18N->Init;
-
- RT->InstallMode(1);
-} else {
- RT->Init();
-
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'post');
- unless ( $status ) {
- print STDERR $msg, "\n\n";
- exit -1;
- }
-}
-
-# we must disconnect DB before fork
-if ($RT::Handle) {
- $RT::Handle->dbh(undef);
- undef $RT::Handle;
-}
-
-require RT::Interface::Web::Handler;
-my $app = RT::Interface::Web::Handler->PSGIApp;
-
-if ($ENV{RT_TESTING}) {
- my $screen_logger = $RT::Logger->remove('screen');
- require Log::Dispatch::Perl;
- $RT::Logger->add(
- Log::Dispatch::Perl->new(
- name => 'rttest',
- min_level => $screen_logger->min_level,
- action => {
- error => 'warn',
- critical => 'warn'
- }
- )
- );
- require Plack::Middleware::Test::StashWarnings;
- $app = Plack::Middleware::Test::StashWarnings->wrap($app);
-}
-
-# when used as a psgi file
-if (caller) {
- return $app;
-}
-
-
-# load appropriate server
-
-require Plack::Runner;
-
-my $is_fastcgi = $0 =~ m/fcgi$/;
-my $r = Plack::Runner->new( $0 =~ 'standalone' ? ( server => 'Standalone' ) :
- $is_fastcgi ? ( server => 'FCGI' )
- : (),
- env => 'deployment' );
-
-# figure out the port
-my $port;
-
-# handle "rt-server 8888" for back-compat, but complain about it
-if ($ARGV[0] && $ARGV[0] =~ m/^\d+$/) {
- warn "Deprecated: please run $0 --port $ARGV[0] instead\n";
- unshift @ARGV, '--port';
-}
-
-my @args = @ARGV;
-
-use List::MoreUtils 'last_index';
-my $last_index = last_index { $_ eq '--port' } @args;
-
-my $explicit_port;
-
-if ( $last_index != -1 && $args[$last_index+1] =~ /^\d+$/ ) {
- $explicit_port = $args[$last_index+1];
- $port = $explicit_port;
-
- # inform the rest of the system what port we manually chose
- my $old_app = $app;
- $app = sub {
- my $env = shift;
-
- $env->{'rt.explicit_port'} = $port;
-
- $old_app->($env, @_);
- };
-}
-else {
- # default to the configured WebPort and inform Plack::Runner
- $port = RT->Config->Get('WebPort') || '8080';
- push @args, '--port', $port;
-}
-
-push @args, '--server', 'Standalone' if RT->InstallMode;
-push @args, '--server', 'Starlet' unless $r->{server} || grep { m/--server/ } @args;
-
-$r->parse_options(@args);
-
-delete $r->{options} if $is_fastcgi; ### mangle_host_port_socket ruins everything
-
-unless ($r->{env} eq 'development') {
- push @{$r->{options}}, server_ready => sub {
- my($args) = @_;
- my $name = $args->{server_software} || ref($args); # $args is $server
- my $host = $args->{host} || 0;
- my $proto = $args->{proto} || 'http';
- print STDERR "$name: Accepting connections at $proto://$host:$args->{port}/\n";
- };
-}
-eval { $r->run($app) };
-if (my $err = $@) {
- handle_startup_error($err);
-}
-
-exit 0;
-
-sub handle_startup_error {
- my $err = shift;
- if ( $err =~ /listen/ ) {
- handle_bind_error();
- } else {
- die
- "Something went wrong while trying to run RT's standalone web server:\n\t"
- . $err;
- }
-}
-
-
-sub handle_bind_error {
-
- print STDERR <<EOF;
-WARNING: RT couldn't start up a web server on port @{[$port]}.
-This is often the case if the port is already in use or you're running @{[$0]}
-as someone other than your system's "root" user. You may also specify a
-temporary port with: $0 --port <port>
-EOF
-
- if ($explicit_port) {
- print STDERR
- "Please check your system configuration or choose another port\n\n";
- }
-}
-
-__END__
-
-=head1 NAME
-
-rt-server - RT standalone server
-
-=head1 SYNOPSIS
-
- # runs prefork server listening on port 8080, requires Starlet
- rt-server --port 8080
-
- # runs server listening on port 8080
- rt-server --server Standalone --port 8080
- # or
- standalone_httpd --port 8080
-
- # runs other PSGI server on port 8080
- rt-server --server Starman --port 8080
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-use vars qw($Nobody $SystemUser $item);
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Term::ReadKey;
-use Getopt::Long;
-
-$| = 1; # unbuffer all output.
-
-my %args = (
- dba => 'freeside',
-);
-GetOptions(
- \%args,
- 'action=s',
- 'force', 'debug',
- 'dba=s', 'dba-password=s', 'prompt-for-dba-password',
- 'datafile=s', 'datadir=s', 'skip-create', 'root-password-file=s',
- 'help|h',
-);
-
-no warnings 'once';
-if ( $args{help} || ! $args{'action'} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage({ verbose => 2 });
- exit;
-}
-
-require RT;
-RT->LoadConfig();
-RT->InitClasses();
-
-# Force warnings to be output to STDERR if we're not already logging
-# them at a higher level
-RT->Config->Set( LogToScreen => 'warning')
- unless ( RT->Config->Get( 'LogToScreen' )
- && RT->Config->Get( 'LogToScreen' ) =~ /^(debug|info|notice)$/ );
-
-# get customized root password
-my $root_password;
-if ( $args{'root-password-file'} ) {
- open( my $fh, '<', $args{'root-password-file'} )
- or die "Couldn't open 'args{'root-password-file'}' for reading: $!";
- $root_password = <$fh>;
- chomp $root_password;
- my $min_length = RT->Config->Get('MinimumPasswordLength');
- if ($min_length) {
- die
-"password needs to be at least $min_length long, please check file '$args{'root-password-file'}'"
- if length $root_password < $min_length;
- }
- close $fh;
-}
-
-
-# check and setup @actions
-my @actions = grep $_, split /,/, $args{'action'};
-if ( @actions > 1 && $args{'datafile'} ) {
- print STDERR "You can not use --datafile option with multiple actions.\n";
- exit(-1);
-}
-foreach ( @actions ) {
- unless ( /^(?:init|create|drop|schema|acl|coredata|insert|upgrade)$/ ) {
- print STDERR "$0 called with an invalid --action parameter.\n";
- exit(-1);
- }
- if ( /^(?:init|drop|upgrade)$/ && @actions > 1 ) {
- print STDERR "You can not mix init, drop or upgrade action with any action.\n";
- exit(-1);
- }
-}
-
-# convert init to multiple actions
-my $init = 0;
-if ( $actions[0] eq 'init' ) {
- if ($args{'skip-create'}) {
- @actions = qw(schema coredata insert);
- } else {
- @actions = qw(create schema acl coredata insert);
- }
- $init = 1;
-}
-
-# set options from environment
-foreach my $key(qw(Type Host Name User Password)) {
- next unless exists $ENV{ 'RT_DB_'. uc $key };
- print "Using Database$key from RT_DB_". uc($key) ." environment variable.\n";
- RT->Config->Set( "Database$key", $ENV{ 'RT_DB_'. uc $key });
-}
-
-my $db_type = RT->Config->Get('DatabaseType') || '';
-my $db_host = RT->Config->Get('DatabaseHost') || '';
-my $db_name = RT->Config->Get('DatabaseName') || '';
-my $db_user = RT->Config->Get('DatabaseUser') || '';
-my $db_pass = RT->Config->Get('DatabasePassword') || '';
-
-# load it here to get error immidiatly if DB type is not supported
-require RT::Handle;
-
-if ( $db_type eq 'SQLite' && !File::Spec->file_name_is_absolute($db_name) ) {
- $db_name = File::Spec->catfile($RT::VarPath, $db_name);
- RT->Config->Set( DatabaseName => $db_name );
-}
-
-my $dba_user = $args{'dba'} || $ENV{'RT_DBA_USER'} || $db_user || '';
-my $dba_pass = exists($args{'dba-password'})
- ? $args{'dba-password'}
- : $ENV{'RT_DBA_PASSWORD'};
-
-if ($args{'skip-create'}) {
- $dba_user = $db_user;
- $dba_pass = $db_pass;
-} else {
- if ( !$args{force} && ( !defined $dba_pass || $args{'prompt-for-dba-password'} ) ) {
- $dba_pass = get_dba_password();
- chomp $dba_pass if defined($dba_pass);
- }
-}
-
-print "Working with:\n"
- ."Type:\t$db_type\nHost:\t$db_host\nName:\t$db_name\n"
- ."User:\t$db_user\nDBA:\t$dba_user" . ($args{'skip-create'} ? ' (No DBA)' : '') . "\n";
-
-foreach my $action ( @actions ) {
- no strict 'refs';
- my ($status, $msg) = *{ 'action_'. $action }{'CODE'}->( %args );
- error($action, $msg) unless $status;
- print $msg .".\n" if $msg;
- print "Done.\n";
-}
-
-sub action_create {
- my %args = @_;
- my $dbh = get_system_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now creating a $db_type database $db_name for RT.\n";
- return RT::Handle->CreateDatabase( $dbh );
-}
-
-sub action_drop {
- my %args = @_;
-
- print "Dropping $db_type database $db_name.\n";
- unless ( $args{'force'} ) {
- print <<END;
-
-About to drop $db_type database $db_name on $db_host.
-WARNING: This will erase all data in $db_name.
-
-END
- exit(-2) unless _yesno();
- }
-
- my $dbh = get_system_dbh();
- return RT::Handle->DropDatabase( $dbh );
-}
-
-sub action_schema {
- my %args = @_;
- my $dbh = get_admin_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now populating database schema.\n";
- return RT::Handle->InsertSchema( $dbh, $args{'datafile'} || $args{'datadir'} );
-}
-
-sub action_acl {
- my %args = @_;
- my $dbh = get_admin_dbh();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting database ACLs.\n";
- return RT::Handle->InsertACL( $dbh, $args{'datafile'} || $args{'datadir'} );
-}
-
-sub action_coredata {
- my %args = @_;
- $RT::Handle = RT::Handle->new;
- $RT::Handle->dbh( undef );
- RT::ConnectToDatabase();
- RT::InitLogging();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting RT core system objects.\n";
- return $RT::Handle->InsertInitialData;
-}
-
-sub action_insert {
- my %args = @_;
- $RT::Handle = RT::Handle->new;
- RT::Init();
- my ($status, $msg) = RT::Handle->CheckCompatibility( $RT::Handle->dbh, 'pre' );
- return ($status, $msg) unless $status;
-
- print "Now inserting data.\n";
- my $file = $args{'datafile'};
- $file = $RT::EtcPath . "/initialdata" if $init && !$file;
- $file ||= $args{'datadir'}."/content";
-
- # Slurp in backcompat
- my %removed;
- my @back = @{$args{backcompat} || []};
- if (@back) {
- my @lines = do {local @ARGV = @back; <>};
- for (@lines) {
- s/\#.*//;
- next unless /\S/;
- my ($class, @fields) = split;
- $class->_BuildTableAttributes;
- $RT::Logger->debug("Temporarily removing @fields from $class");
- $removed{$class}{$_} = delete $RT::Record::_TABLE_ATTR->{$class}{$_}
- for @fields;
- }
- }
-
- my @ret = $RT::Handle->InsertData( $file, $root_password );
-
- # Put back the fields we chopped off
- for my $class (keys %removed) {
- $RT::Record::_TABLE_ATTR->{$class}{$_} = $removed{$class}{$_}
- for keys %{$removed{$class}};
- }
- return @ret;
-}
-
-sub action_upgrade {
- my %args = @_;
- my $base_dir = $args{'datadir'} || "./etc/upgrade";
- return (0, "Couldn't read dir '$base_dir' with upgrade data")
- unless -d $base_dir || -r _;
-
- my $upgrading_from = undef;
- do {
- if ( defined $upgrading_from ) {
- print "Doesn't match #.#.#: ";
- } else {
- print "Enter RT version you're upgrading from: ";
- }
- $upgrading_from = scalar <STDIN>;
- chomp $upgrading_from;
- $upgrading_from =~ s/\s+//g;
- } while $upgrading_from !~ /^\d+\.\d+\.\w+$/;
-
- my $upgrading_to = $RT::VERSION;
- return (0, "The current version $upgrading_to is lower than $upgrading_from")
- if RT::Handle::cmp_version( $upgrading_from, $upgrading_to ) > 0;
-
- return (1, "The version $upgrading_to you're upgrading to is up to date")
- if RT::Handle::cmp_version( $upgrading_from, $upgrading_to ) == 0;
-
- my @versions = get_versions_from_to($base_dir, $upgrading_from, undef);
- return (1, "No DB changes since $upgrading_from")
- unless @versions;
-
- if (RT::Handle::cmp_version($versions[-1], $upgrading_to) > 0) {
- print "\n***** There are upgrades for $versions[-1], which is later than $upgrading_to,\n";
- print "***** which you are nominally upgrading to. Upgrading to $versions[-1] instead.\n";
- $upgrading_to = $versions[-1];
- }
-
- print "\nGoing to apply following upgrades:\n";
- print map "* $_\n", @versions;
-
- {
- my $custom_upgrading_to = undef;
- do {
- if ( defined $custom_upgrading_to ) {
- print "Doesn't match #.#.#: ";
- } else {
- print "\nEnter RT version if you want to stop upgrade at some point,\n";
- print " or leave it blank if you want apply above upgrades: ";
- }
- $custom_upgrading_to = scalar <STDIN>;
- chomp $custom_upgrading_to;
- $custom_upgrading_to =~ s/\s+//g;
- last unless $custom_upgrading_to;
- } while $custom_upgrading_to !~ /^\d+\.\d+\.\w+$/;
-
- if ( $custom_upgrading_to ) {
- return (
- 0, "The version you entered ($custom_upgrading_to) is lower than\n"
- ."version you're upgrading from ($upgrading_from)"
- ) if RT::Handle::cmp_version( $upgrading_from, $custom_upgrading_to ) > 0;
-
- return (1, "The version you're upgrading to is up to date")
- if RT::Handle::cmp_version( $upgrading_from, $custom_upgrading_to ) == 0;
-
- if ( RT::Handle::cmp_version( $RT::VERSION, $custom_upgrading_to ) < 0 ) {
- print "Version you entered is greater than installed ($RT::VERSION).\n";
- _yesno() or exit(-2);
- }
- # ok, checked everything no let's refresh list
- $upgrading_to = $custom_upgrading_to;
- @versions = get_versions_from_to($base_dir, $upgrading_from, $upgrading_to);
-
- return (1, "No DB changes between $upgrading_from and $upgrading_to")
- unless @versions;
-
- print "\nGoing to apply following upgrades:\n";
- print map "* $_\n", @versions;
- }
- }
-
- print "\nIT'S VERY IMPORTANT TO BACK UP BEFORE THIS STEP\n\n";
- _yesno() or exit(-2) unless $args{'force'};
-
- my ( $ret, $msg );
- foreach my $n ( 0..$#versions ) {
- my $v = $versions[$n];
- my @back = grep {-e $_} map {"$base_dir/$versions[$_]/backcompat"} $n+1..$#versions;
- print "Processing $v\n";
- my %tmp = (%args, datadir => "$base_dir/$v", datafile => undef, backcompat => \@back);
- if ( -e "$base_dir/$v/schema.$db_type" ) {
- ( $ret, $msg ) = action_schema( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- if ( -e "$base_dir/$v/acl.$db_type" ) {
- ( $ret, $msg ) = action_acl( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- if ( -e "$base_dir/$v/content" ) {
- ( $ret, $msg ) = action_insert( %tmp );
- return ( $ret, $msg ) unless $ret;
- }
- }
- return 1;
-}
-
-sub get_versions_from_to {
- my ($base_dir, $from, $to) = @_;
-
- opendir( my $dh, $base_dir ) or die "couldn't open dir: $!";
- my @versions = grep -d "$base_dir/$_" && /\d+\.\d+\.\d+/, readdir $dh;
- closedir $dh;
-
- return
- grep defined $to ? RT::Handle::cmp_version($_, $to) <= 0 : 1,
- grep RT::Handle::cmp_version($_, $from) > 0,
- sort RT::Handle::cmp_version @versions;
-}
-
-sub error {
- my ($action, $msg) = @_;
- print STDERR "Couldn't finish '$action' step.\n\n";
- print STDERR "ERROR: $msg\n\n";
- exit(-1);
-}
-
-sub get_dba_password {
- print "In order to create or update your RT database,"
- . " this script needs to connect to your "
- . " $db_type instance on $db_host as $dba_user\n";
- print "Please specify that user's database password below. If the user has no database\n";
- print "password, just press return.\n\n";
- print "Password: ";
- ReadMode('noecho');
- my $password = ReadLine(0);
- ReadMode('normal');
- print "\n";
- return ($password);
-}
-
-# get_system_dbh
-# Returns L<DBI> database handle connected to B<system> with DBA credentials.
-# See also L<RT::Handle/SystemDSN>.
-
-
-sub get_system_dbh {
- return _get_dbh( RT::Handle->SystemDSN, $dba_user, $dba_pass );
-}
-
-sub get_admin_dbh {
- return _get_dbh( RT::Handle->DSN, $dba_user, $dba_pass );
-}
-
-# get_rt_dbh [USER, PASSWORD]
-
-# Returns L<DBI> database handle connected to RT database,
-# you may specify credentials(USER and PASSWORD) to connect
-# with. By default connects with credentials from RT config.
-
-sub get_rt_dbh {
- return _get_dbh( RT::Handle->DSN, $db_user, $db_pass );
-}
-
-sub _get_dbh {
- my ($dsn, $user, $pass) = @_;
- my $dbh = DBI->connect(
- $dsn, $user, $pass,
- { RaiseError => 0, PrintError => 0 },
- );
- unless ( $dbh ) {
- my $msg = "Failed to connect to $dsn as user '$user': ". $DBI::errstr;
- if ( $args{'debug'} ) {
- require Carp; Carp::confess( $msg );
- } else {
- print STDERR $msg; exit -1;
- }
- }
- return $dbh;
-}
-
-sub _yesno {
- print "Proceed [y/N]:";
- my $x = scalar(<STDIN>);
- $x =~ /^y/i;
-}
-
-1;
-
-__END__
-
-=head1 NAME
-
-rt-setup-database - Set up RT's database
-
-=head1 SYNOPSIS
-
- rt-setup-database --action ...
-
-=head1 OPTIONS
-
-=over
-
-=item action
-
-Several actions can be combined using comma separated list.
-
-=over
-
-=item init
-
-Initialize the database. This is combination of multiple actions listed below.
-Create DB, schema, setup acl, insert core data and initial data.
-
-=item upgrade
-
-Apply all needed schema/acl/content updates (will ask for version to upgrade
-from)
-
-=item create
-
-Create the database.
-
-=item drop
-
-Drop the database. This will B<ERASE ALL YOUR DATA>.
-
-=item schema
-
-Initialize only the database schema
-
-To use a local or supplementary datafile, specify it using the '--datadir'
-option below.
-
-=item acl
-
-Initialize only the database ACLs
-
-To use a local or supplementary datafile, specify it using the '--datadir'
-option below.
-
-=item coredata
-
-Insert data into RT's database. This data is required for normal functioning of
-any RT instance.
-
-=item insert
-
-Insert data into RT's database. By default, will use RT's installation data.
-To use a local or supplementary datafile, specify it using the '--datafile'
-option below.
-
-=back
-
-=item datafile
-
-file path of the data you want to action on
-
-e.g. C<--datafile /path/to/datafile>
-
-=item datadir
-
-Used to specify a path to find the local database schema and acls to be
-installed.
-
-e.g. C<--datadir /path/to/>
-
-=item dba
-
-dba's username
-
-=item dba-password
-
-dba's password
-
-=item prompt-for-dba-password
-
-Ask for the database administrator's password interactively
-
-=item skip-create
-
-for 'init': skip creating the database and the user account, so we don't need
-administrator privileges
-
-=item root-password-file
-
-for 'init' and 'insert': rather than using the default administrative password
-for RT's "root" user, use the password in this file.
-
-=back
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-=head1 NAME
-
-rt-shredder - Script which wipe out tickets from RT DB
-
-=head1 SYNOPSIS
-
- rt-shredder --plugin list
- rt-shredder --plugin help-Tickets
- rt-shredder --plugin 'Tickets=query,Queue="general" and Status="deleted"'
-
- rt-shredder --sqldump unshred.sql --plugin ...
- rt-shredder --force --plugin ...
-
-=head1 DESCRIPTION
-
-rt-shredder - is script that allow you to wipe out objects
-from RT DB. This script uses API that L<RT::Shredder> module adds to RT.
-Script can be used as example of usage of the shredder API.
-
-=head1 USAGE
-
-You can use several options to control which objects script
-should wipeout.
-
-=head1 OPTIONS
-
-=head2 --sqldump <filename>
-
-Outputs INSERT queiries into file. This dump can be used to restore data
-after wiping out.
-
-By default creates files
-F<< <RT_home>/var/data/RT-Shredder/<ISO_date>-XXXX.sql >>
-
-=head2 --object (DEPRECATED)
-
-Option has been deprecated, use plugin C<Objects> instead.
-
-=head2 --plugin '<plugin name>[=<arg>,<val>[;<arg>,<val>]...]'
-
-You can use plugins to select RT objects with various conditions.
-See also --plugin list and --plugin help options.
-
-=head2 --plugin list
-
-Output list of the available plugins.
-
-=head2 --plugin help-<plugin name>
-
-Outputs help for specified plugin.
-
-=head2 --force
-
-Script doesn't ask any questions.
-
-=head1 SEE ALSO
-
-L<RT::Shredder>
-
-=cut
-
-use strict;
-use warnings FATAL => 'all';
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use RT::Shredder ();
-use Getopt::Long qw(GetOptions);
-use File::Spec ();
-
-use RT::Shredder::Plugin ();
-# prefetch list of plugins
-our %plugins = RT::Shredder::Plugin->List;
-
-our %opt;
-parse_args();
-
-RT::Shredder::Init( %opt );
-my $shredder = RT::Shredder->new;
-
-{
- my $plugin = eval { $shredder->AddDumpPlugin( Arguments => {
- file_name => $opt{'sqldump'},
- from_storage => 0,
- } ) };
- if( $@ ) {
- print STDERR "ERROR: Couldn't open SQL dump file: $@\n";
- exit 1 if $opt{'sqldump'};
-
- print STDERR "WARNING: It's strongly recommended to use '--sqldump <filename>' option\n";
- unless( $opt{'force'} ) {
- exit 0 unless prompt_yN( "Do you want to proceed?" );
- }
- } else {
- print "SQL dump file is '". $plugin->FileName ."'\n";
- }
-}
-
-my @objs = process_plugins( $shredder );
-prompt_delete_objs( \@objs ) unless $opt{'force'};
-
-$shredder->PutObjects( Objects => $_ ) foreach @objs;
-eval { $shredder->WipeoutAll };
-if( $@ ) {
- require RT::Shredder::Exceptions;
- if( my $e = RT::Shredder::Exception::Info->caught ) {
- print "\nERROR: $e\n\n";
- exit 1;
- }
- die $@;
-}
-
-sub prompt_delete_objs
-{
- my( $objs ) = @_;
- unless( @$objs ) {
- print "Objects list is empty, try refine search options\n";
- exit 0;
- }
- my $list = "Next ". scalar( @$objs ) ." objects would be deleted:\n";
- foreach my $o( @$objs ) {
- $list .= "\t". $o->_AsString ." object\n";
- }
- print $list;
- exit(0) unless prompt_yN( "Do you want to proceed?" );
-}
-
-sub prompt_yN
-{
- my $text = shift;
- print "$text [y/N] ";
- unless( <STDIN> =~ /^(?:y|yes)$/i ) {
- return 0;
- }
- return 1;
-}
-
-sub usage
-{
- require RT::Shredder::POD;
- RT::Shredder::POD::shredder_cli( $0, \*STDOUT );
- exit 1;
-}
-
-sub parse_args
-{
- my $tmp;
- Getopt::Long::Configure( "pass_through" );
- my @objs = ();
- if( GetOptions( 'object=s' => \@objs ) && @objs ) {
- print STDERR "Option --object had been deprecated, use plugin 'Objects' instead\n";
- exit(1);
- }
-
- my @plugins = ();
- if( GetOptions( 'plugin=s' => \@plugins ) && @plugins ) {
- $opt{'plugin'} = \@plugins;
- foreach my $str( @plugins ) {
- if( $str =~ /^\s*list\s*$/ ) {
- show_plugin_list();
- } elsif( $str =~ /^\s*help-(\w+)\s*$/ ) {
- show_plugin_help( $1 );
- } elsif( $str =~ /^(\w+)(=.*)?$/ && !$plugins{$1} ) {
- print "Couldn't find plugin '$1'\n";
- show_plugin_list();
- }
- }
- }
-
- # other options make no sense without previouse
- usage() unless keys %opt;
-
- if( GetOptions( 'force' => \$tmp ) && $tmp ) {
- $opt{'force'}++;
- }
- $tmp = undef;
- if( GetOptions( 'sqldump=s' => \$tmp ) && $tmp ) {
- $opt{'sqldump'} = $tmp;
- }
- return;
-}
-
-sub process_plugins
-{
- my $shredder = shift;
-
- my @res;
- foreach my $str( @{ $opt{'plugin'} } ) {
- my $plugin = RT::Shredder::Plugin->new;
- my( $status, $msg ) = $plugin->LoadByString( $str );
- unless( $status ) {
- print STDERR "Couldn't load plugin\n";
- print STDERR "Error: $msg\n";
- exit(1);
- }
- if ( lc $plugin->Type eq 'search' ) {
- push @res, _process_search_plugin( $shredder, $plugin );
- }
- elsif ( lc $plugin->Type eq 'dump' ) {
- _process_dump_plugin( $shredder, $plugin );
- }
- }
- return RT::Shredder->CastObjectsToRecords( Objects => \@res );
-}
-
-sub _process_search_plugin {
- my ($shredder, $plugin) = @_;
- my ($status, @objs) = $plugin->Run;
- unless( $status ) {
- print STDERR "Couldn't run plugin\n";
- print STDERR "Error: $objs[1]\n";
- exit(1);
- }
-
- my $msg;
- ($status, $msg) = $plugin->SetResolvers( Shredder => $shredder );
- unless( $status ) {
- print STDERR "Couldn't set conflicts resolver\n";
- print STDERR "Error: $msg\n";
- exit(1);
- }
- return @objs;
-}
-
-sub _process_dump_plugin {
- my ($shredder, $plugin) = @_;
- $shredder->AddDumpPlugin(
- Object => $plugin,
- );
-}
-
-sub show_plugin_list
-{
- print "Plugins list:\n";
- print "\t$_\n" foreach( grep !/^Base$/, keys %plugins );
- exit(1);
-}
-
-sub show_plugin_help
-{
- my( $name ) = @_;
- require RT::Shredder::POD;
- unless( $plugins{ $name } ) {
- print "Couldn't find plugin '$name'\n";
- show_plugin_list();
- }
- RT::Shredder::POD::plugin_cli( $plugins{'Base'}, \*STDOUT, 1 );
- RT::Shredder::POD::plugin_cli( $plugins{ $name }, \*STDOUT );
- exit(1);
-}
-
-exit(0);
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-#
-# This is just a basic script that checks to make sure that all
-# the modules needed by RT before you can install it.
-#
-
-use strict;
-no warnings qw(numeric redefine);
-use Getopt::Long;
-my %args;
-my %deps;
-GetOptions(
- \%args, 'v|verbose',
- 'install', 'with-MYSQL',
- 'with-POSTGRESQL|with-pg|with-pgsql', 'with-SQLITE',
- 'with-ORACLE', 'with-FASTCGI',
- 'with-MODPERL1', 'with-MODPERL2',
- 'with-STANDALONE',
-
- 'with-DEV',
-
- 'with-GPG',
- 'with-ICAL',
- 'with-SMTP',
- 'with-GRAPHVIZ',
- 'with-GD',
- 'with-DASHBOARDS',
- 'with-USERLOGO',
- 'with-SSL-MAILGATE',
-
- 'download=s',
- 'repository=s',
- 'list-deps',
- 'help|h',
-);
-
-if ( $args{help} ) {
- require Pod::Usage;
- Pod::Usage::pod2usage( { verbose => 2 } );
- exit;
-}
-
-# Set up defaults
-my %default = (
- 'with-MASON' => 1,
- 'with-PSGI' => 0,
- 'with-CORE' => 1,
- 'with-CLI' => 1,
- 'with-MAILGATE' => 1,
- 'with-DEV' => 0,
- 'with-GPG' => 1,
- 'with-ICAL' => 1,
- 'with-SMTP' => 1,
- 'with-GRAPHVIZ' => 0,
- 'with-GD' => 0,
- 'with-DASHBOARDS' => 1,
- 'with-USERLOGO' => 1,
- 'with-SSL-MAILGATE' => 0,
-);
-$args{$_} = $default{$_} foreach grep !exists $args{$_}, keys %default;
-
-{
- my $section;
- my %always_show_sections = (
- perl => 1,
- users => 1,
- );
-
- sub section {
- my $s = shift;
- $section = $s;
- print "$s:\n" unless $args{'list-deps'};
- }
-
- sub print_found {
- my $msg = shift;
- my $test = shift;
- my $extra = shift;
-
- unless ( $args{'list-deps'} ) {
- if ( $args{'v'} or not $test or $always_show_sections{$section} ) {
- print "\t$msg ...";
- print $test ? "found" : "MISSING";
- print "\n";
- }
-
- print "\t\t$extra\n" if defined $extra;
- }
- }
-}
-
-sub conclude {
- my %missing_by_type = @_;
-
- unless ( $args{'list-deps'} ) {
- unless ( keys %missing_by_type ) {
- print "\nAll dependencies have been found.\n";
- return;
- }
-
- print "\nSOME DEPENDENCIES WERE MISSING.\n";
-
- for my $type ( keys %missing_by_type ) {
- my $missing = $missing_by_type{$type};
-
- print "$type missing dependencies:\n";
- for my $name ( keys %$missing ) {
- my $module = $missing->{$name};
- my $version = $module->{version};
- my $error = $module->{error};
- print_found( $name . ( $version && !$error ? " >= $version" : "" ),
- 0, $module->{error} );
- }
- }
- exit 1;
- }
-}
-
-sub text_to_hash {
- my %hash;
- for my $line ( split /\n/, $_[0] ) {
- my($key, $value) = $line =~ /(\S+)\s*(\S*)/;
- $value ||= '';
- $hash{$key} = $value;
- }
-
- return %hash;
-}
-
-$deps{'CORE'} = [ text_to_hash( << '.') ];
-Class::Accessor 0.34
-DateTime 0.44
-DateTime::Locale 0.40
-Digest::base
-Digest::MD5 2.27
-Digest::SHA
-DBI 1.37
-Class::ReturnValue 0.40
-DBIx::SearchBuilder 1.59
-Text::Template 1.44
-File::ShareDir
-File::Spec 0.8
-HTML::Quoted
-HTML::Scrubber 0.08
-Log::Dispatch 2.23
-Sys::Syslog 0.16
-Locale::Maketext 1.06
-Locale::Maketext::Lexicon 0.32
-Locale::Maketext::Fuzzy
-MIME::Entity 5.425
-Mail::Mailer 1.57
-Email::Address
-Text::Wrapper
-Time::ParseDate
-Time::HiRes
-File::Temp 0.19
-Text::Quoted 2.02
-Tree::Simple 1.04
-UNIVERSAL::require
-Regexp::Common
-Scalar::Util
-Module::Versions::Report 1.05
-Cache::Simple::TimedExpiry
-Encode 2.39
-CSS::Squish 0.06
-File::Glob
-Devel::StackTrace 1.19
-Text::Password::Pronounceable
-Devel::GlobalDestruction
-List::MoreUtils
-Net::CIDR
-Regexp::Common::net::CIDR
-Regexp::IPv6
-.
-
-$deps{'MASON'} = [ text_to_hash( << '.') ];
-HTML::Mason 1.43
-Errno
-Digest::MD5 2.27
-CGI::Cookie 1.20
-Storable 2.08
-Apache::Session 1.53
-XML::RSS 1.05
-Text::WikiFormat 0.76
-CSS::Squish 0.06
-Devel::StackTrace 1.19
-JSON
-IPC::Run3
-.
-
-$deps{'PSGI'} = [ text_to_hash( << '.') ];
-CGI 3.38
-CGI::PSGI 0.12
-HTML::Mason::PSGIHandler 0.52
-Plack 0.9971
-Plack::Handler::Starlet
-CGI::Emulate::PSGI
-.
-
-$deps{'MAILGATE'} = [ text_to_hash( << '.') ];
-HTML::TreeBuilder
-HTML::FormatText
-Getopt::Long
-LWP::UserAgent
-Pod::Usage
-.
-
-$deps{'SSL-MAILGATE'} = [ text_to_hash( << '.') ];
-Crypt::SSLeay
-Net::SSL
-LWP::UserAgent 6.0
-LWP::Protocol::https
-Mozilla::CA
-.
-
-$deps{'CLI'} = [ text_to_hash( << '.') ];
-Getopt::Long 2.24
-LWP
-HTTP::Request::Common
-Text::ParseWords
-Term::ReadLine
-Term::ReadKey
-.
-
-$deps{'DEV'} = [ text_to_hash( << '.') ];
-Email::Abstract
-Test::Email
-HTML::Form
-HTML::TokeParser
-WWW::Mechanize 1.52
-Test::WWW::Mechanize 1.30
-Module::Refresh 0.03
-Test::Expect 0.31
-XML::Simple
-File::Find
-Test::Deep 0 # needed for shredder tests
-String::ShellQuote 0 # needed for gnupg-incoming.t
-Log::Dispatch::Perl
-Test::Warn
-Test::Builder 0.90 # needed for is_passing
-Test::MockTime
-Log::Dispatch::Perl
-Test::WWW::Mechanize::PSGI
-Plack::Middleware::Test::StashWarnings
-Test::LongString
-.
-
-$deps{'FASTCGI'} = [ text_to_hash( << '.') ];
-FCGI
-FCGI::ProcManager
-.
-
-$deps{'MODPERL1'} = [ text_to_hash( << '.') ];
-Apache::Request
-Apache::DBI 0.92
-.
-
-$deps{'MODPERL2'} = [ text_to_hash( << '.') ];
-Apache::DBI
-HTML::Mason 1.36
-.
-
-$deps{'MYSQL'} = [ text_to_hash( << '.') ];
-DBD::mysql 2.1018
-.
-
-$deps{'ORACLE'} = [ text_to_hash( << '.') ];
-DBD::Oracle
-.
-
-$deps{'POSTGRESQL'} = [ text_to_hash( << '.') ];
-DBD::Pg 1.43
-.
-
-$deps{'SQLITE'} = [ text_to_hash( << '.') ];
-DBD::SQLite 1.00
-.
-
-$deps{'GPG'} = [ text_to_hash( << '.') ];
-GnuPG::Interface
-PerlIO::eol
-.
-
-$deps{'ICAL'} = [ text_to_hash( << '.') ];
-Data::ICal
-.
-
-$deps{'SMTP'} = [ text_to_hash( << '.') ];
-Net::SMTP
-.
-
-$deps{'DASHBOARDS'} = [ text_to_hash( << '.') ];
-HTML::RewriteAttributes 0.04
-MIME::Types
-.
-
-$deps{'GRAPHVIZ'} = [ text_to_hash( << '.') ];
-GraphViz
-IPC::Run
-.
-
-$deps{'GD'} = [ text_to_hash( << '.') ];
-GD
-GD::Graph
-GD::Text
-.
-
-$deps{'USERLOGO'} = [ text_to_hash( << '.') ];
-Convert::Color
-.
-
-my %AVOID = (
- 'DBD::Oracle' => [qw(1.23)],
-);
-
-if ($args{'download'}) {
- download_mods();
-}
-
-
-check_perl_version();
-
-check_users();
-
-my %Missing_By_Type = ();
-foreach my $type (sort grep $args{$_}, keys %args) {
- next unless ($type =~ /^with-(.*?)$/) and $deps{$1};
-
- $type = $1;
- section("$type dependencies");
-
- my @missing;
- my @deps = @{ $deps{$type} };
-
- my %missing = test_deps(@deps);
-
- if ( $args{'install'} ) {
- for my $module (keys %missing) {
- resolve_dep($module, $missing{$module}{version});
- my $m = $module . '.pm';
- $m =~ s!::!/!g;
- if ( delete $INC{$m} ) {
- my $symtab = $module . '::';
- no strict 'refs';
- for my $symbol ( keys %{$symtab} ) {
- next if substr( $symbol, -2, 2 ) eq '::';
- delete $symtab->{$symbol};
- }
- }
- delete $missing{$module}
- if test_dep($module, $missing{$module}{version}, $AVOID{$module});
- }
- }
-
- $Missing_By_Type{$type} = \%missing if keys %missing;
-}
-
-conclude(%Missing_By_Type);
-
-sub test_deps {
- my @deps = @_;
-
- my %missing;
- while(@deps) {
- my $module = shift @deps;
- my $version = shift @deps;
- my($test, $error) = test_dep($module, $version, $AVOID{$module});
- my $msg = $module . ($version && !$error ? " >= $version" : '');
- print_found($msg, $test, $error);
-
- $missing{$module} = { version => $version, error => $error } unless $test;
- }
-
- return %missing;
-}
-
-sub test_dep {
- my $module = shift;
- my $version = shift;
- my $avoid = shift;
-
- if ( $args{'list-deps'} ) {
- print $module, ': ', $version || 0, "\n";
- }
- else {
- eval "use $module $version ()";
- if ( my $error = $@ ) {
- return 0 unless wantarray;
-
- $error =~ s/\n(.*)$//s;
- $error =~ s/at \(eval \d+\) line \d+\.$//;
- undef $error if $error =~ /this is only/;
-
- return ( 0, $error );
- }
-
- if ( $avoid ) {
- my $version = $module->VERSION;
- if ( grep $version eq $_, @$avoid ) {
- return 0 unless wantarray;
- return (0, "It's known that there are problems with RT and version '$version' of '$module' module. If it's the latest available version of the module then you have to downgrade manually.");
- }
- }
-
- return 1;
- }
-}
-
-sub resolve_dep {
- my $module = shift;
- my $version = shift;
-
- print "\nInstall module $module\n";
-
- my $ext = $ENV{'RT_FIX_DEPS_CMD'} || $ENV{'PERL_PREFER_CPAN_CLIENT'};
- unless( $ext ) {
- my $configured = 1;
- {
- local @INC = @INC;
- if ( $ENV{'HOME'} ) {
- unshift @INC, "$ENV{'HOME'}/.cpan";
- }
- $configured = eval { require CPAN::MyConfig } || eval { require CPAN::Config };
- }
- unless ( $configured ) {
- print <<END;
-You haven't configured the CPAN shell yet.
-Please run `/usr/bin/perl -MCPAN -e shell` to configure it.
-END
- exit(1);
- }
- my $rv = eval { require CPAN; CPAN::Shell->install($module) };
- return $rv unless $@;
-
- print <<END;
-Failed to load module CPAN.
-
--------- Error ---------
-$@
-------------------------
-
-When we tried to start installing RT's perl dependencies,
-we were unable to load the CPAN client. This module is usually distributed
-with Perl. This usually indicates that your vendor has shipped an unconfigured
-or incorrectly configured CPAN client.
-The error above may (or may not) give you a hint about what went wrong
-
-You have several choices about how to install dependencies in
-this situatation:
-
-1) use a different tool to install dependencies by running setting the following
- shell environment variable and rerunning this tool:
- RT_FIX_DEPS_CMD='/usr/bin/perl -MCPAN -e"install %s"'
-2) Attempt to configure CPAN by running:
- `/usr/bin/perl -MCPAN -e shell` program from shell.
- If this fails, you may have to manually upgrade CPAN (see below)
-3) Try to update the CPAN client. Download it from:
- http://search.cpan.org/dist/CPAN and try again
-4) Install each dependency manually by downloading them one by one from
- http://search.cpan.org
-
-END
- exit(1);
- }
-
- if( $ext =~ /\%s/) {
- $ext =~ s/\%s/$module/g; # sprintf( $ext, $module );
- } else {
- $ext .= " $module";
- }
- print "\t\tcommand: '$ext'\n";
- return scalar `$ext 1>&2`;
-}
-
-sub download_mods {
- my %modules;
- use CPAN;
-
- foreach my $key (keys %deps) {
- my @deps = (@{$deps{$key}});
- while (@deps) {
- my $mod = shift @deps;
- my $ver = shift @deps;
- next if ($mod =~ /^(DBD-|Apache-Request)/);
- $modules{$mod} = $ver;
- }
- }
- my @mods = keys %modules;
- CPAN::get();
- my $moddir = $args{'download'};
- foreach my $mod (@mods) {
- $CPAN::Config->{'build_dir'} = $moddir;
- CPAN::get($mod);
- }
-
- opendir(DIR, $moddir);
- while ( my $dir = readdir(DIR)) {
- print "Dir is $dir\n";
- next if ( $dir =~ /^\.\.?$/);
-
- # Skip things we've previously tagged
- my $out = `svn ls $args{'repository'}/tags/$dir`;
- next if ($out);
-
- if ($dir =~ /^(.*)-(.*?)$/) {
- `svn_load_dirs -no_user_input -t tags/$dir -v $args{'repository'} dists/$1 $moddir/$dir`;
- `rm -rf $moddir/$dir`;
-
- }
-
- }
- closedir(DIR);
- exit;
-}
-
-sub check_perl_version {
- section("perl");
- eval {require 5.008003};
- if ($@) {
- print_found("5.8.3", 0,"RT is known to be non-functional on versions of perl older than 5.8.3. Please upgrade to 5.8.3 or newer.");
- exit(1);
- } else {
- print_found( sprintf(">=5.8.3(%vd)", $^V), 1 );
- }
-}
-
-sub check_users {
- section("users");
- print_found("rt group (freeside)", defined getgrnam("freeside"));
- print_found("bin owner (root)", defined getpwnam("root"));
- print_found("libs owner (root)", defined getpwnam("root"));
- print_found("libs group (bin)", defined getgrnam("bin"));
- print_found("web owner (freeside)", defined getpwnam("freeside"));
- print_found("web group (freeside)", defined getgrnam("freeside"));
-}
-
-1;
-
-__END__
-
-=head1 NAME
-
-rt-test-dependencies - test rt's dependencies
-
-=head1 SYNOPSIS
-
- rt-test-dependencies
- rt-test-dependencies --install
- rt-test-dependencies --with-mysql --with-fastcgi
-
-=head1 DESCRIPTION
-
-by default, C<rt-test-dependencies> determines whether you have installed all
-the perl modules RT needs to run.
-
-the "RT_FIX_DEPS_CMD" environment variable, if set, will be used instead of
-the standard CPAN shell by --install to install any required modules. it will
-be called with the module name, or, if "RT_FIX_DEPS_CMD" contains a "%s", will
-replace the "%s" with the module name before calling the program.
-
-=head1 OPTIONS
-
-=over
-
-=item install
-
- install missing modules
-
-=item verbose
-
-list the status of all dependencies, rather than just the missing ones.
-
--v is equal to --verbose
-
-=item specify dependencies
-
-=over
-
-=item --with-mysql
-
- database interface for mysql
-
-=item --with-postgresql
-
- database interface for postgresql
-
-=item with-oracle
-
- database interface for oracle
-
-=item with-sqlite
-
- database interface and driver for sqlite (unsupported)
-
-=item with-fastcgi
-
- libraries needed to support the fastcgi handler
-
-=item with-modperl1
-
- libraries needed to support the modperl 1 handler
-
-=item with-modperl2
-
- libraries needed to support the modperl 2 handler
-
-=item with-dev
-
- tools needed for RT development
-
-=back
-
-=back
-
+++ /dev/null
-#!/usr/bin/perl
-# BEGIN BPS TAGGED BLOCK {{{
-#
-# COPYRIGHT:
-#
-# This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
-# <sales@bestpractical.com>
-#
-# (Except where explicitly superseded by other copyright notices)
-#
-#
-# LICENSE:
-#
-# This work is made available to you under the terms of Version 2 of
-# the GNU General Public License. A copy of that license should have
-# been provided with this software, but in any event can be snarfed
-# from www.gnu.org.
-#
-# This work is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301 or visit their web page on the internet at
-# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
-#
-#
-# CONTRIBUTION SUBMISSION POLICY:
-#
-# (The following paragraph is not intended to limit the rights granted
-# to you to modify and distribute this software under the terms of
-# the GNU General Public License and is only of importance to you if
-# you choose to contribute your changes and enhancements to the
-# community by submitting them to Best Practical Solutions, LLC.)
-#
-# By intentionally submitting any modifications, corrections or
-# derivatives to this work, or any other work intended for use with
-# Request Tracker, to Best Practical Solutions, LLC, you confirm that
-# you are the copyright holder for those contributions and you grant
-# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
-# royalty-free, perpetual, license to use, copy, create derivative
-# works based on those contributions, and sublicense and distribute
-# those contributions and any derivatives thereof.
-#
-# END BPS TAGGED BLOCK }}}
-use strict;
-use warnings;
-
-# fix lib paths, some may be relative
-BEGIN {
- require File::Spec;
- my @libs = ("/opt/rt3/lib", "/opt/rt3/local/lib");
- my $bin_path;
-
- for my $lib (@libs) {
- unless ( File::Spec->file_name_is_absolute($lib) ) {
- unless ($bin_path) {
- if ( File::Spec->file_name_is_absolute(__FILE__) ) {
- $bin_path = ( File::Spec->splitpath(__FILE__) )[1];
- }
- else {
- require FindBin;
- no warnings "once";
- $bin_path = $FindBin::Bin;
- }
- }
- $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
- }
- unshift @INC, $lib;
- }
-
-}
-
-use Getopt::Long;
-my %opt = ();
-GetOptions(
- \%opt,
- 'check|c',
- 'resolve',
- 'force',
- 'verbose|v',
- 'help|h',
-);
-
-if ( $opt{help} || !$opt{check} ) {
- require Pod::Usage;
- print Pod::Usage::pod2usage( { verbose => 2 } );
- exit;
-}
-
-usage_warning() if $opt{'resolve'} && !$opt{'force'};
-
-
-sub usage_warning {
- print <<END;
-This utility can fix some issues with DB by creating or updating. In some
-cases there is no enough data to resurect a missing record, but records which
-refers to a missing can be deleted. It's up to you to decide what to do.
-
-In any case it's highly recommended to have a backup before resolving anything.
-
-Press enter to continue.
-END
-# Read a line of text, any line of text
- <STDIN>;
-}
-
-use RT;
-RT::LoadConfig();
-RT::Init();
-
-my $dbh = $RT::Handle->dbh;
-my $db_type = RT->Config->Get('DatabaseType');
-
-my %TYPE = (
- 'Transactions.Field' => 'text',
- 'Transactions.OldValue' => 'text',
- 'Transactions.NewValue' => 'text',
-);
-
-my @models = qw(
- ACE
- Attachment
- Attribute
- CachedGroupMember
- CustomField
- CustomFieldValue
- GroupMember
- Group
- Link
- ObjectCustomField
- ObjectCustomFieldValue
- Principal
- Queue
- ScripAction
- ScripCondition
- Scrip
- Template
- Ticket
- Transaction
- User
-);
-
-my %redo_on;
-$redo_on{'Delete'} = {
- ACL => [],
-
- Attributes => [],
-
- Links => [],
-
- CustomFields => [],
- CustomFieldValues => [],
- ObjectCustomFields => [],
- ObjectCustomFieldValues => [],
-
- Queues => [],
-
- Scrips => [],
- ScripActions => [],
- ScripConditions => [],
- Templates => [],
-
- Tickets => [ 'Tickets -> other', 'Tickets <-> Role Groups' ],
- Transactions => [ 'Attachments -> other' ],
-
- Principals => ['User <-> ACL equivalence group', 'GMs -> Groups, Members' ],
- Users => ['User <-> ACL equivalence group', 'GMs -> Groups, Members', 'Principals -> Users' ],
- Groups => ['User <-> ACL equivalence group', 'GMs -> Groups, Members', 'CGM vs. GM', 'Principals -> Groups' ],
-
- GroupMembers => [ 'CGM vs. GM' ],
- CachedGroupMembers => [ 'CGM vs. GM' ],
-};
-$redo_on{'Create'} = {
- Principals => ['User <-> ACL equivalence group', 'GMs -> Groups, Members' ],
- Groups => ['User <-> ACL equivalence group', 'GMs -> Groups, Members', 'CGM vs. GM' ],
- GroupMembers => [ 'CGM vs. GM' ],
- CachedGroupMembers => [ 'CGM vs. GM' ],
-};
-$redo_on{'Update'} = {
- Groups => ['User Defined Group Name uniqueness'],
-};
-
-my %describe_cb;
-%describe_cb = (
- Attachments => sub {
- my $row = shift;
- my $txn_id = $row->{transactionid};
- my $res = 'Attachment #'. $row->{id} .' -> Txn #'. $txn_id;
- return $res .', '. describe( 'Transactions', $txn_id );
- },
- Transactions => sub {
- my $row = shift;
- return 'Transaction #'. $row->{id} .' -> object '. $row->{objecttype} .' #'. $row->{objectid};
- },
-);
-
-{ my %cache = ();
-sub m2t($) {
- my $model = shift;
- return $cache{$model} if $cache{$model};
- my $class = "RT::$model";
- my $object = $class->new( RT->SystemUser );
- return $cache{$model} = $object->Table;
-} }
-
-my (@do_check, %redo_check);
-
-my @CHECKS;
-foreach my $table ( qw(Users Groups) ) {
- push @CHECKS, "$table -> Principals" => sub {
- my $msg = "A record in $table refers to a nonexistent record in Principals."
- ." The script can either create the missing record in Principals"
- ." or delete the record in $table.";
- my ($type) = ($table =~ /^(.*)s$/);
- check_integrity(
- $table, 'id' => 'Principals', 'id',
- join_condition => 't.PrincipalType = ?',
- bind_values => [ $type ],
- action => sub {
- my $id = shift;
- return unless my $a = prompt_action( ['Delete', 'create'], $msg );
-
- if ( $a eq 'd' ) {
- delete_record( $table, $id );
- }
- elsif ( $a eq 'c' ) {
- my $principal_id = create_record( 'Principals',
- id => $id, PrincipalType => $type, ObjectId => $id, Disabled => 0
- );
- }
- else {
- die "Unknown action '$a'";
- }
- },
- );
- };
-
- push @CHECKS, "Principals -> $table" => sub {
- my $msg = "A record in Principals refers to a nonexistent record in $table."
- ." In some cases it's possible to manually resurrect such records,"
- ." but this utility can only delete records.";
-
- check_integrity(
- 'Principals', 'id' => $table, 'id',
- condition => 's.PrincipalType = ?',
- bind_values => [ $table =~ /^(.*)s$/ ],
- action => sub {
- my $id = shift;
- return unless prompt( 'Delete', $msg );
-
- delete_record( 'Principals', $id );
- },
- );
- };
-}
-
-push @CHECKS, 'User <-> ACL equivalence group' => sub {
- # from user to group
- check_integrity(
- 'Users', 'id' => 'Groups', 'Instance',
- join_condition => 't.Domain = ? AND t.Type = ?',
- bind_values => [ 'ACLEquivalence', 'UserEquiv' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Create', "Found an user that has no ACL equivalence group."
- );
-
- my $gid = create_record( 'Groups',
- Domain => 'ACLEquivalence', Type => 'UserEquiv', Instance => $id,
- );
- },
- );
- # from group to user
- check_integrity(
- 'Groups', 'Instance' => 'Users', 'id',
- condition => 's.Domain = ? AND s.Type = ?',
- bind_values => [ 'ACLEquivalence', 'UserEquiv' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found an user ACL equivalence group, but there is no user."
- );
-
- delete_record( 'Groups', $id );
- },
- );
- # one ACL equiv group for each user
- check_uniqueness(
- 'Groups',
- columns => ['Instance'],
- condition => '.Domain = ? AND .Type = ?',
- bind_values => [ 'ACLEquivalence', 'UserEquiv' ],
- );
-};
-
-# check integrity of Queue role groups
-push @CHECKS, 'Queues <-> Role Groups' => sub {
- # XXX: we check only that there is at least one group for a queue
- # from queue to group
- check_integrity(
- 'Queues', 'id' => 'Groups', 'Instance',
- join_condition => 't.Domain = ?',
- bind_values => [ 'RT::Queue-Role' ],
- );
- # from group to queue
- check_integrity(
- 'Groups', 'Instance' => 'Queues', 'id',
- condition => 's.Domain = ?',
- bind_values => [ 'RT::Queue-Role' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a role group of a nonexistent queue."
- );
-
- delete_record( 'Groups', $id );
- },
- );
-};
-
-# check integrity of Ticket role groups
-push @CHECKS, 'Tickets <-> Role Groups' => sub {
- # XXX: we check only that there is at least one group for a queue
- # from queue to group
- check_integrity(
- 'Tickets', 'id' => 'Groups', 'Instance',
- join_condition => 't.Domain = ?',
- bind_values => [ 'RT::Ticket-Role' ],
- );
- # from group to ticket
- check_integrity(
- 'Groups', 'Instance' => 'Tickets', 'id',
- condition => 's.Domain = ?',
- bind_values => [ 'RT::Ticket-Role' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a role group of a nonexistent ticket."
- );
-
- delete_record( 'Groups', $id );
- },
- );
-};
-
-# additional CHECKS on groups
-push @CHECKS, 'Role Groups (Instance, Type) uniqueness' => sub {
- # Check that Domain, Instance and Type are unique
- check_uniqueness(
- 'Groups',
- columns => ['Domain', 'Instance', 'Type'],
- condition => '.Domain LIKE ?',
- bind_values => [ '%-Role' ],
- );
-};
-
-push @CHECKS, 'System internal group uniqueness' => sub {
- check_uniqueness(
- 'Groups',
- columns => ['Instance', 'Type'],
- condition => '.Domain = ?',
- bind_values => [ 'SystemInternal' ],
- );
-};
-
-# CHECK that user defined group names are unique
-push @CHECKS, 'User Defined Group Name uniqueness' => sub {
- check_uniqueness(
- 'Groups',
- columns => ['Name'],
- condition => '.Domain = ?',
- bind_values => [ 'UserDefined' ],
- extra_tables => ['Principals sp', 'Principals tp'],
- extra_condition => join(" and ", map { "$_.id = ${_}p.ObjectId and ${_}p.PrincipalType = ? and ${_}p.Disabled != 1" } qw(s t)),
- extra_values => ['Group', 'Group'],
- action => sub {
- return unless prompt(
- 'Rename', "Found a user defined group with a non-unique Name."
- );
-
- my $id = shift;
- my %cols = @_;
- update_records('Groups', { id => $id }, { Name => join('-', $cols{'Name'}, $id) });
- },
- );
-};
-
-push @CHECKS, 'GMs -> Groups, Members' => sub {
- my $msg = "A record in GroupMembers references an object that doesn't exist."
- ." Maybe you deleted a group or principal directly from the database?"
- ." Usually it's OK to delete such records.";
- check_integrity(
- 'GroupMembers', 'GroupId' => 'Groups', 'id',
- action => sub {
- my $id = shift;
- return unless prompt( 'Delete', $msg );
-
- delete_record( 'GroupMembers', $id );
- },
- );
- check_integrity(
- 'GroupMembers', 'MemberId' => 'Principals', 'id',
- action => sub {
- my $id = shift;
- return unless prompt( 'Delete', $msg );
-
- delete_record( 'GroupMembers', $id );
- },
- );
-};
-
-# CGM and GM
-push @CHECKS, 'CGM vs. GM' => sub {
- # all GM record should be duplicated in CGM
- check_integrity(
- GroupMembers => ['GroupId', 'MemberId'],
- CachedGroupMembers => ['GroupId', 'MemberId'],
- join_condition => 't.ImmediateParentId = t.GroupId AND t.Via = t.id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Create',
- "Found a record in GroupMembers that has no direct duplicate in CachedGroupMembers table."
- );
-
- my $gm = RT::GroupMember->new( RT->SystemUser );
- $gm->Load( $id );
- die "Couldn't load GM record #$id" unless $gm->id;
- my $cgm = create_record( 'CachedGroupMembers',
- GroupId => $gm->GroupId, MemberId => $gm->MemberId,
- ImmediateParentId => $gm->GroupId, Via => undef,
- Disabled => 0, # XXX: we should check integrity of Disabled field
- );
- update_records( "CachedGroupMembers", { id => $cgm }, { Via => $cgm } );
- },
- );
- # all first level CGM records should have a GM record
- check_integrity(
- CachedGroupMembers => ['GroupId', 'MemberId'],
- GroupMembers => ['GroupId', 'MemberId'],
- condition => 's.ImmediateParentId = s.GroupId AND s.Via = s.id AND s.GroupId != s.MemberId',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a record in CachedGroupMembers for a (Group, Member) pair"
- ." that doesn't exist in the GroupMembers table."
- );
-
- delete_record( 'CachedGroupMembers', $id );
- },
- );
- # each group should have a CGM record where MemberId == GroupId
- check_integrity(
- Groups => ['id', 'id'],
- CachedGroupMembers => ['GroupId', 'MemberId'],
- join_condition => 't.ImmediateParentId = t.GroupId AND t.Via = t.id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Create',
- "Found a record in Groups that has no direct"
- ." duplicate in CachedGroupMembers table."
- );
-
- my $g = RT::Group->new( RT->SystemUser );
- $g->Load( $id );
- die "Couldn't load group #$id" unless $g->id;
- die "Loaded group by $id has id ". $g->id unless $g->id == $id;
- my $cgm = create_record( 'CachedGroupMembers',
- GroupId => $id, MemberId => $id,
- ImmediateParentId => $id, Via => undef,
- Disabled => $g->Disabled,
- );
- update_records( "CachedGroupMembers", { id => $cgm }, { Via => $cgm } );
- },
- );
-
- # and back, each record in CGM with MemberId == GroupId without exceptions
- # should reference a group
- check_integrity(
- CachedGroupMembers => ['GroupId', 'MemberId'],
- Groups => ['id', 'id'],
- condition => "s.GroupId = s.MemberId",
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a record in CachedGroupMembers for a group that doesn't exist."
- );
-
- delete_record( 'CachedGroupMembers', $id );
- },
- );
- # Via
- check_integrity(
- CachedGroupMembers => 'Via',
- CachedGroupMembers => 'id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a record in CachedGroupMembers with Via that references a nonexistent record."
- );
-
- delete_record( 'CachedGroupMembers', $id );
- },
- );
-
- # for every CGM where ImmediateParentId != GroupId there should be
- # matching parent record (first level)
- check_integrity(
- CachedGroupMembers => ['ImmediateParentId', 'MemberId'],
- CachedGroupMembers => ['GroupId', 'MemberId'],
- join_condition => 't.Via = t.id',
- condition => 's.ImmediateParentId != s.GroupId',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a record in CachedGroupMembers that references a nonexistent record in CachedGroupMembers table."
- );
-
- delete_record( 'CachedGroupMembers', $id );
- },
- );
-
- # for every CGM where ImmediateParentId != GroupId there should be
- # matching "grand" parent record
- check_integrity(
- CachedGroupMembers => ['GroupId', 'ImmediateParentId', 'Via'],
- CachedGroupMembers => ['GroupId', 'MemberId', 'id'],
- condition => 's.ImmediateParentId != s.GroupId',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a record in CachedGroupMembers that references a nonexistent record in CachedGroupMembers table."
- );
-
- delete_record( 'CachedGroupMembers', $id );
- },
- );
-
- # CHECK recursive records:
- # if we have CGM1 (G1,M1,V1,IP1) then for every GM2(G2, M2), where G2 == M1,
- # we should have CGM3 where G3 = G1, M3 = M2, V3 = ID1, IP3 = M1
- {
- my $query = <<END;
-SELECT cgm1.GroupId, gm2.MemberId, cgm1.id AS Via,
- cgm1.MemberId AS ImmediateParentId, cgm1.Disabled
-FROM
- CachedGroupMembers cgm1
- CROSS JOIN GroupMembers gm2
- LEFT JOIN CachedGroupMembers cgm3 ON (
- cgm3.GroupId = cgm1.GroupId
- AND cgm3.MemberId = gm2.MemberId
- AND cgm3.Via = cgm1.id
- AND cgm3.ImmediateParentId = cgm1.MemberId )
-WHERE cgm1.GroupId != cgm1.MemberId
-AND gm2.GroupId = cgm1.MemberId
-AND cgm3.id IS NULL
-END
-
- my $action = sub {
- my %props = @_;
- return unless prompt(
- 'Create',
- "Found records in CachedGroupMembers table without recursive duplicates."
- );
- my $cgm = create_record( 'CachedGroupMembers', %props );
- };
-
- my $sth = execute_query( $query );
- while ( my ($g, $m, $via, $ip, $dis) = $sth->fetchrow_array ) {
- print STDERR "Principal #$m is member of #$ip when #$ip is member of #$g,";
- print STDERR " but there is no cached GM record that $m is member of #$g.\n";
- $action->(
- GroupId => $g, MemberId => $m, Via => $via,
- ImmediateParentId => $ip, Disabled => $dis,
- );
- }
- }
-};
-
-# Tickets
-push @CHECKS, 'Tickets -> other' => sub {
- check_integrity(
- 'Tickets', 'EffectiveId' => 'Tickets', 'id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete',
- "Found a ticket that's been merged into a ticket that no longer exists."
- );
-
- delete_record( 'Tickets', $id );
- },
- );
- check_integrity(
- 'Tickets', 'Queue' => 'Queues', 'id',
- );
- check_integrity(
- 'Tickets', 'Owner' => 'Users', 'id',
- );
- # XXX: check that owner is only member of owner role group
-};
-
-
-push @CHECKS, 'Transactions -> other' => sub {
- foreach my $model ( @models ) {
- check_integrity(
- 'Transactions', 'ObjectId' => m2t($model), 'id',
- condition => 's.ObjectType = ?',
- bind_values => [ "RT::$model" ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction without object."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- }
- # type = CustomField
- check_integrity(
- 'Transactions', 'Field' => 'CustomFields', 'id',
- condition => 's.Type = ?',
- bind_values => [ 'CustomField' ],
- );
- # type = Take, Untake, Force, Steal or Give
- check_integrity(
- 'Transactions', 'OldValue' => 'Users', 'id',
- condition => 's.Type IN (?, ?, ?, ?, ?)',
- bind_values => [ qw(Take Untake Force Steal Give) ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction regarding Owner changes,"
- ." but the User with id stored in OldValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- check_integrity(
- 'Transactions', 'NewValue' => 'Users', 'id',
- condition => 's.Type IN (?, ?, ?, ?, ?)',
- bind_values => [ qw(Take Untake Force Steal Give) ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction regarding Owner changes,"
- ." but the User with id stored in NewValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- # type = DelWatcher
- check_integrity(
- 'Transactions', 'OldValue' => 'Principals', 'id',
- condition => 's.Type = ?',
- bind_values => [ 'DelWatcher' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction describing watcher changes,"
- ." but the User with id stored in OldValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- # type = AddWatcher
- check_integrity(
- 'Transactions', 'NewValue' => 'Principals', 'id',
- condition => 's.Type = ?',
- bind_values => [ 'AddWatcher' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction describing watcher changes,"
- ." but the User with id stored in NewValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
-
-# XXX: Links need more love, uri is stored instead of id
-# # type = DeleteLink
-# check_integrity(
-# 'Transactions', 'OldValue' => 'Links', 'id',
-# condition => 's.Type = ?',
-# bind_values => [ 'DeleteLink' ],
-# );
-# # type = AddLink
-# check_integrity(
-# 'Transactions', 'NewValue' => 'Links', 'id',
-# condition => 's.Type = ?',
-# bind_values => [ 'AddLink' ],
-# );
-
- # type = Set, Field = Queue
- check_integrity(
- 'Transactions', 'NewValue' => 'Queues', 'id',
- condition => 's.Type = ? AND s.Field = ?',
- bind_values => [ 'Set', 'Queue' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction describing a queue change,"
- ." but the Queue with id stored in the NewValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- check_integrity(
- 'Transactions', 'OldValue' => 'Queues', 'id',
- condition => 's.Type = ? AND s.Field = ?',
- bind_values => [ 'Set', 'Queue' ],
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found a transaction describing a queue change,"
- ." but the Queue with id stored in the OldValue column doesn't exist anymore."
- );
-
- delete_record( 'Transactions', $id );
- },
- );
- # Reminders
- check_integrity(
- 'Transactions', 'NewValue' => 'Tickets', 'id',
- join_condition => 't.Type = ?',
- condition => 's.Type IN (?, ?, ?)',
- bind_values => [ 'reminder', 'AddReminder', 'OpenReminder', 'ResolveReminder' ],
- );
-};
-
-# Attachments
-push @CHECKS, 'Attachments -> other' => sub {
- check_integrity(
- Attachments => 'TransactionId', Transactions => 'id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found an attachment without a transaction."
- );
- delete_record( 'Attachments', $id );
- },
- );
- check_integrity(
- Attachments => 'Parent', Attachments => 'id',
- action => sub {
- my $id = shift;
- return unless prompt(
- 'Delete', "Found an sub-attachment without its parent attachment."
- );
- delete_record( 'Attachments', $id );
- },
- );
- check_integrity(
- Attachments => 'Parent',
- Attachments => 'id',
- join_condition => 's.TransactionId = t.TransactionId',
- );
-};
-
-push @CHECKS, 'CustomFields and friends' => sub {
- #XXX: ObjectCustomFields needs more love
- check_integrity(
- 'CustomFieldValues', 'CustomField' => 'CustomFields', 'id',
- );
- check_integrity(
- 'ObjectCustomFieldValues', 'CustomField' => 'CustomFields', 'id',
- );
- foreach my $model ( @models ) {
- check_integrity(
- 'ObjectCustomFieldValues', 'ObjectId' => m2t($model), 'id',
- condition => 's.ObjectType = ?',
- bind_values => [ "RT::$model" ],
- );
- }
-};
-
-push @CHECKS, Templates => sub {
- check_integrity(
- 'Templates', 'Queue' => 'Queues', 'id',
- );
-};
-
-push @CHECKS, Scrips => sub {
- check_integrity(
- 'Scrips', 'Queue' => 'Queues', 'id',
- );
- check_integrity(
- 'Scrips', 'ScripCondition' => 'ScripConditions', 'id',
- );
- check_integrity(
- 'Scrips', 'ScripAction' => 'ScripActions', 'id',
- );
- check_integrity(
- 'Scrips', 'Template' => 'Templates', 'id',
- );
-};
-
-push @CHECKS, Attributes => sub {
- foreach my $model ( @models ) {
- check_integrity(
- 'Attributes', 'ObjectId' => m2t($model), 'id',
- condition => 's.ObjectType = ?',
- bind_values => [ "RT::$model" ],
- );
- }
-};
-
-# Fix situations when Creator or LastUpdatedBy references ACL equivalence
-# group of a user instead of user
-push @CHECKS, 'FIX: LastUpdatedBy and Creator' => sub {
- my %fix = ();
- foreach my $model ( @models ) {
- my $class = "RT::$model";
- my $object = $class->new( RT->SystemUser );
- foreach my $column ( qw(LastUpdatedBy Creator) ) {
- next unless $object->_Accessible( $column, 'auto' );
-
- my $table = m2t($model);
- my $query = <<END;
-SELECT m.id, g.id, g.Instance
-FROM
- Groups g JOIN $table m ON g.id = m.$column
-WHERE
- g.Domain = ?
- AND g.Type = ?
-END
- my $action = sub {
- my ($gid, $uid) = @_;
- return unless prompt(
- 'Update',
- "Looks like there were a bug in old versions of RT back in 2006\n"
- ."that has been fixed. If other checks are ok then it's ok to update\n"
- ."these records to point them to users instead of groups"
- );
- $fix{ $table }{ $column }{ $gid } = $uid;
- };
-
- my $sth = execute_query( $query, 'ACLEquivalence', 'UserEquiv' );
- while ( my ($rid, $gid, $uid) = $sth->fetchrow_array ) {
- print STDERR "Record #$rid in $table refers to ACL equivalence group #$gid of user #$uid";
- print STDERR " when must reference user.\n";
- $action->( $gid, $uid );
- if ( keys( %fix ) > 1000 ) {
- $sth->finish;
- last;
- }
- }
- }
- }
-
- if ( keys %fix ) {
- foreach my $table ( keys %fix ) {
- foreach my $column ( keys %{ $fix{ $table } } ) {
- my $query = "UPDATE $table SET $column = ? WHERE $column = ?";
- while ( my ($gid, $uid) = each %{ $fix{ $table }{ $column } } ) {
- update_records( $table, { $column => $gid }, { $column => $uid } );
- }
- }
- }
- $redo_check{'FIX: LastUpdatedBy and Creator'} = 1;
- }
-};
-
-push @CHECKS, 'LastUpdatedBy and Creator' => sub {
- foreach my $model ( @models ) {
- my $class = "RT::$model";
- my $object = $class->new( RT->SystemUser );
- my $table = $object->Table;
- foreach my $column ( qw(LastUpdatedBy Creator) ) {
- next unless $object->_Accessible( $column, 'auto' );
- check_integrity(
- $table, $column => 'Users', 'id',
- action => sub {
- my ($id, %prop) = @_;
- return unless my $replace_with = prompt_integer(
- 'Replace',
- "Column $column should point to a user, but there is record #$id in table $table\n"
- ."where it's not true. It's ok to replace these wrong references with id of any user.\n"
- ."Note that id you enter is not checked. You can peak any user from your DB, but it's\n"
- ."may be better to create a special user for this, for example 'user_that_has_been_deleted'\n"
- ."or something like that.",
- "$table.$column -> user #$prop{$column}"
- );
- update_records( $table, { id => $id, $column => $prop{$column} }, { $column => $replace_with } );
- },
- );
- }
- }
-};
-my %CHECKS = @CHECKS;
-
-@do_check = do { my $i = 1; grep $i++%2, @CHECKS };
-
-while ( my $check = shift @do_check ) {
- $CHECKS{ $check }->();
-
- foreach my $redo ( keys %redo_check ) {
- die "check $redo doesn't exist" unless $CHECKS{ $redo };
- delete $redo_check{ $redo };
- next if grep $_ eq $redo, @do_check; # don't do twice
- push @do_check, $redo;
- }
-}
-
-sub check_integrity {
- my ($stable, @scols) = (shift, shift);
- my ($ttable, @tcols) = (shift, shift);
- my %args = @_;
-
- @scols = @{ $scols[0] } if ref $scols[0];
- @tcols = @{ $tcols[0] } if ref $tcols[0];
-
- print "Checking integrity of $stable.{". join(', ', @scols) ."} => $ttable.{". join(', ', @tcols) ."}\n"
- if $opt{'verbose'};
-
- my $query = "SELECT s.id, ". join(', ', map "s.$_", @scols)
- ." FROM $stable s LEFT JOIN $ttable t"
- ." ON (". join(
- ' AND ', map columns_eq_cond('s', $stable, $scols[$_] => 't', $ttable, $tcols[$_]), (0..(@scols-1))
- ) .")"
- . ($args{'join_condition'}? " AND ( $args{'join_condition'} )": "")
- ." WHERE t.id IS NULL"
- ." AND ". join(' AND ', map "s.$_ IS NOT NULL", @scols);
-
- $query .= " AND ( $args{'condition'} )" if $args{'condition'};
-
- my @binds = @{ $args{'bind_values'} || [] };
- if ( $tcols[0] eq 'id' && @tcols == 1 ) {
- my $type = $TYPE{"$stable.$scols[0]"} || 'number';
- if ( $type eq 'number' ) {
- $query .= " AND s.$scols[0] != ?"
- }
- elsif ( $type eq 'text' ) {
- $query .= " AND s.$scols[0] NOT LIKE ?"
- }
- push @binds, 0;
- }
-
- my $sth = execute_query( $query, @binds );
- while ( my ($sid, @set) = $sth->fetchrow_array ) {
- print STDERR "Record #$sid in $stable references a nonexistent record in $ttable\n";
- for ( my $i = 0; $i < @scols; $i++ ) {
- print STDERR "\t$scols[$i] => '$set[$i]' => $tcols[$i]\n";
- }
- print STDERR "\t". describe( $stable, $sid ) ."\n";
- $args{'action'}->( $sid, map { $scols[$_] => $set[$_] } (0 .. (@scols-1)) ) if $args{'action'};
- }
-}
-
-sub describe {
- my ($table, $id) = @_;
- return '' unless my $cb = $describe_cb{ $table };
-
- my $row = load_record( $table, $id );
- unless ( $row->{id} ) {
- $table =~ s/s$//;
- return "$table doesn't exist";
- }
- return $cb->( $row );
-}
-
-sub columns_eq_cond {
- my ($la, $lt, $lc, $ra, $rt, $rc) = @_;
- my $ltype = $TYPE{"$lt.$lc"} || 'number';
- my $rtype = $TYPE{"$rt.$rc"} || 'number';
- return "$la.$lc = $ra.$rc" if $db_type ne 'Pg' || $ltype eq $rtype;
-
- if ( $rtype eq 'text' ) {
- return "$ra.$rc LIKE CAST($la.$lc AS text)";
- }
- elsif ( $ltype eq 'text' ) {
- return "$la.$lc LIKE CAST($ra.$rc AS text)";
- }
- else { die "don't know how to cast" }
-}
-
-sub check_uniqueness {
- my $on = shift;
- my %args = @_;
-
- my @columns = @{ $args{'columns'} };
-
- print "Checking uniqueness of ( ", join(', ', map "'$_'", @columns )," ) in table '$on'\n"
- if $opt{'verbose'};
-
- my ($scond, $tcond);
- if ( $scond = $tcond = $args{'condition'} ) {
- $scond =~ s/(\s|^)\./$1s./g;
- $tcond =~ s/(\s|^)\./$1t./g;
- }
-
- my $query = "SELECT s.id, t.id, ". join(', ', map "s.$_", @columns)
- ." FROM $on s LEFT JOIN $on t "
- ." ON s.id != t.id AND ". join(' AND ', map "s.$_ = t.$_", @columns)
- . ($tcond? " AND ( $tcond )": "")
- . ($args{'extra_tables'} ? join(", ", "", @{$args{'extra_tables'}}) : "")
- ." WHERE t.id IS NOT NULL "
- ." AND ". join(' AND ', map "s.$_ IS NOT NULL", @columns);
- $query .= " AND ( $scond )" if $scond;
- $query .= " AND ( $args{'extra_condition'} )" if $args{'extra_condition'};
-
- my $sth = execute_query(
- $query,
- $args{'bind_values'}? (@{ $args{'bind_values'} }, @{ $args{'bind_values'} }): (),
- $args{'extra_values'}? (@{ $args{'extra_values'} }): ()
- );
- while ( my ($sid, $tid, @set) = $sth->fetchrow_array ) {
- print STDERR "Record #$tid in $on has the same set of values as $sid\n";
- for ( my $i = 0; $i < @columns; $i++ ) {
- print STDERR "\t$columns[$i] => '$set[$i]'\n";
- }
- $args{'action'}->( $tid, map { $columns[$_] => $set[$_] } (0 .. (@columns-1)) ) if $args{'action'};
- }
-}
-
-sub load_record {
- my ($table, $id) = @_;
- my $sth = execute_query( "SELECT * FROM $table WHERE id = ?", $id );
- return $sth->fetchrow_hashref('NAME_lc');
-}
-
-sub delete_record {
- my ($table, $id) = (@_);
- print "Deleting record #$id in $table\n" if $opt{'verbose'};
- my $query = "DELETE FROM $table WHERE id = ?";
- $redo_check{ $_ } = 1 foreach @{ $redo_on{'Delete'}{ $table } || [] };
- return execute_query( $query, $id );
-}
-
-sub create_record {
- print "Creating a record in $_[0]\n" if $opt{'verbose'};
- $redo_check{ $_ } = 1 foreach @{ $redo_on{'Create'}{ $_[0] } || [] };
- return $RT::Handle->Insert( @_ );
-}
-
-sub update_records {
- my $table = shift;
- my $where = shift;
- my $what = shift;
-
- my (@where_cols, @where_binds);
- while ( my ($k, $v) = each %$where ) { push @where_cols, $k; push @where_binds, $v; }
-
- my (@what_cols, @what_binds);
- while ( my ($k, $v) = each %$what ) { push @what_cols, $k; push @what_binds, $v; }
-
- print "Updating record(s) in $table\n" if $opt{'verbose'};
- my $query = "UPDATE $table SET ". join(', ', map "$_ = ?", @what_cols)
- ." WHERE ". join(' AND ', map "$_ = ?", @where_cols);
- $redo_check{ $_ } = 1 foreach @{ $redo_on{'Update'}{ $table } || [] };
- return execute_query( $query, @what_binds, @where_binds );
-}
-
-sub execute_query {
- my ($query, @binds) = @_;
-
- print "Executing query: $query\n\n" if $opt{'verbose'};
-
- my $sth = $dbh->prepare( $query ) or die "couldn't prepare $query\n\tError: ". $dbh->errstr;
- $sth->execute( @binds ) or die "couldn't execute $query\n\tError: ". $sth->errstr;
- return $sth;
-}
-
-{ my %cached_answer;
-sub prompt {
- my $action = shift;
- my $msg = shift;
- my $token = shift || join ':', caller;
-
- return 0 unless $opt{'resolve'};
- return 1 if $opt{'force'};
-
- return $cached_answer{ $token } if exists $cached_answer{ $token };
-
- print $msg, "\n";
- print "$action ALL records with the same defect? [N]: ";
- my $a = <STDIN>;
- return $cached_answer{ $token } = 1 if $a =~ /^(y|yes)$/i;
- return $cached_answer{ $token } = 0;
-} }
-
-{ my %cached_answer;
-sub prompt_action {
- my $actions = shift;
- my $msg = shift;
- my $token = shift || join ':', caller;
-
- return '' unless $opt{'resolve'};
- return '' if $opt{'force'};
- return $cached_answer{ $token } if exists $cached_answer{ $token };
-
- print $msg, "\n";
- print join( ' or ', @$actions ) ." ALL records with the same defect? [do nothing]: ";
- my $a = <STDIN>;
- chomp $a;
- return $cached_answer{ $token } = '' unless $a;
- foreach ( grep rindex(lc $_, lc $a, 0) == 0, @$actions ) {
- return $cached_answer{ $token } = lc substr $a, 0, 1;
- }
- return $cached_answer{ $token } = '';
-} }
-
-{ my %cached_answer;
-sub prompt_integer {
- my $action = shift;
- my $msg = shift;
- my $token = shift || join ':', caller;
-
- return 0 unless $opt{'resolve'};
- return 0 if $opt{'force'};
-
- return $cached_answer{ $token } if exists $cached_answer{ $token };
-
- print $msg, "\n";
- print "$action ALL records with the same defect? [0]: ";
- my $a = <STDIN>; chomp $a; $a = int($a);
- return $cached_answer{ $token } = $a;
-} }
-
-1;
-
-__END__
-
-=head1 NAME
-
-rt-validator - check and correct validity of records in RT's database
-
-=head1 SYNOPSIS
-
- rt-validator --check
- rt-validator --check --verbose
- rt-validator --check --verbose --resolve
- rt-validator --check --verbose --resolve --force
-
-=head1 DESCRIPTION
-
-This script checks integrity of records in RT's DB. May delete some invalid
-records or ressurect accidentally deleted.
-
-=head1 OPTIONS
-
-=over
-
-=item check
-
- mandatory.
-
- it's equall to -c
-
-=item verbose
-
- print additional info to STDOUT
- it's equall to -v
-
-=item resolve
-
- enable resolver that can delete or create some records
-
-=item force
-
- resolve without asking questions
-
-=back
-
+++ /dev/null
-ServerRoot %%SERVER_ROOT%%
-PidFile %%PID_FILE%%
-LockFile %%LOCK_FILE%%
-ServerAdmin root@localhost
-
-%%LOAD_MODULES%%
-
-<IfModule !mpm_netware_module>
-<IfModule !mpm_winnt_module>
-User freeside
-Group freeside
-</IfModule>
-</IfModule>
-
-Listen %%LISTEN%%
-
-ErrorLog "%%LOG_FILE%%"
-LogLevel debug
-
-<Directory />
- Options FollowSymLinks
- AllowOverride None
- Order deny,allow
- Deny from all
-</Directory>
-
-AddDefaultCharset UTF-8
-
-FastCgiServer %%RT_SBIN_PATH%%/rt-server.fcgi \
- -socket %%TMP_DIR%%/socket \
- -processes 1 \
- -idle-timeout 180 \
- -initial-env RT_SITE_CONFIG=%%RT_SITE_CONFIG%% \
- -initial-env RT_TESTING=1
-
-Alias /NoAuth/images/ %%DOCUMENT_ROOT%%/NoAuth/images/
-ScriptAlias / %%RT_SBIN_PATH%%/rt-server.fcgi/
-
-DocumentRoot "%%DOCUMENT_ROOT%%"
-<Location />
- Order allow,deny
- Allow from all
-
-%%BASIC_AUTH%%
-
- Options +ExecCGI
- AddHandler fastcgi-script fcgi
-</Location>
-
+++ /dev/null
-<IfModule mpm_prefork_module>
- StartServers 1
- MinSpareServers 1
- MaxSpareServers 1
- MaxClients 1
- MaxRequestsPerChild 0
-</IfModule>
-
-<IfModule mpm_worker_module>
- StartServers 1
- MinSpareThreads 1
- MaxSpareThreads 1
- ThreadLimit 1
- ThreadsPerChild 1
- MaxClients 1
- MaxRequestsPerChild 0
-</IfModule>
-
-ServerRoot %%SERVER_ROOT%%
-PidFile %%PID_FILE%%
-LockFile %%LOCK_FILE%%
-ServerAdmin root@localhost
-
-%%LOAD_MODULES%%
-
-<IfModule !mpm_netware_module>
-<IfModule !mpm_winnt_module>
-User freeside
-Group freeside
-</IfModule>
-</IfModule>
-
-Listen %%LISTEN%%
-
-ErrorLog "%%LOG_FILE%%"
-LogLevel debug
-
-<Directory />
- Options FollowSymLinks
- AllowOverride None
- Order deny,allow
- Deny from all
-</Directory>
-
-AddDefaultCharset UTF-8
-PerlSetEnv RT_SITE_CONFIG %%RT_SITE_CONFIG%%
-
-DocumentRoot "%%DOCUMENT_ROOT%%"
-<Location />
- Order allow,deny
- Allow from all
-
-%%BASIC_AUTH%%
-
- SetHandler modperl
-
- PerlResponseHandler Plack::Handler::Apache2
- PerlSetVar psgi_app %%RT_SBIN_PATH%%/rt-server
-</Location>
-
-<Perl>
- $ENV{RT_TESTING}=1;
- use Plack::Handler::Apache2;
- Plack::Handler::Apache2->preload("%%RT_SBIN_PATH%%/rt-server");
-</Perl>
-
projects / freeside.git / commitdiff