%#
%# COPYRIGHT:
%#
-%# This software is Copyright (c) 1996-2007 Best Practical Solutions, LLC
+%# This software is Copyright (c) 1996-2005 Best Practical Solutions, LLC
%# <jesse@bestpractical.com>
%#
%# (Except where explicitly superseded by other copyright notices)
%#
%# You should have received a copy of the GNU General Public License
%# along with this program; if not, write to the Free Software
-%# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-%# 02110-1301 or visit their web page on the internet at
-%# http://www.gnu.org/copyleft/gpl.html.
+%# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
%#
%#
%# CONTRIBUTION SUBMISSION POLICY:
$RT::Handle->ForceRollback() if $RT::Handle->TransactionDepth;
-if ($RT::StatementLog) {
- $RT::Handle->ClearSQLStatementLog;
- $RT::Handle->LogSQLStatements(1);
-}
-
-local *session
- unless $m->is_subrequest; # avoid reentrancy, as suggested by masonbook
+local *session unless $m->is_subrequest; # avoid reentrancy, as suggested by masonbook
# Disable AutoFlush using an attribute
-if ( $m->request_comp->attr_exists('AutoFlush') ) {
- $m->autoflush( $m->request_comp->attr('AutoFlush') );
+if ($m->request_comp->attr_exists('AutoFlush')) {
+ $m->autoflush($m->request_comp->attr('AutoFlush'));
}
%ARGS = map {
-
- # if they've passed multiple values, they'll be an array. if they've
+ # if they've passed multiple values, they'll be an array. if they've
# passed just one, a scalar whatever they are, mark them as utf8
my $type = ref($_);
- ( !$type )
- ? Encode::is_utf8($_)
- ? $_
- : Encode::decode( utf8 => $_, Encode::FB_PERLQQ )
- : ( $type eq 'ARRAY' )
- ? [
- map {
- ( ref($_) or Encode::is_utf8($_) )
- ? $_
- : Encode::decode( utf8 => $_, Encode::FB_PERLQQ )
- } @$_
- ]
- : ( $type eq 'HASH' )
- ? {
- map {
- ( ref($_) or Encode::is_utf8($_) )
- ? $_
- : Encode::decode( utf8 => $_, Encode::FB_PERLQQ )
- } %$_
- }
- : $_
-} %ARGS;
-
-# Latter in the code we use
-# $m->comp( { base_comp => $m->request_comp }, $m->fetch_next, %ARGS );
-# instead of $m->call_next to avoid problems with UTF8 keys in arguments.
-# The call_next method pass through original arguments and if you have
-# an argument with unicode key then in a next component you'll get two
-# records in the args hash: one with key without UTF8 flag and another
-# with the flag, which may result into errors. "{ base_comp => $m->request_comp }"
-# is copied from mason's source to get the same results as we get from
-# call_next method, this feature is not documented, so we just leave it
-# here to avoid possible side effects.
-
-# This code canonicalizes time inputs in hours into minutes
-foreach my $field ( keys %ARGS ) {
- next unless $field =~ /^(.*)-TimeUnits$/i && $ARGS{$1};
- my $local = $1;
- $ARGS{$local} =~ s{\b (?: (\d+) \s+ )? (\d+)/(\d+) \b}
- {($1 || 0) + $3 ? $2 / $3 : 0}xe;
- if ( $ARGS{$field} && $ARGS{$field} =~ /hours/i ) {
- $ARGS{$local} *= 60;
- }
- delete $ARGS{$field};
-}
-
-$m->{'rt_base_time'} = [ Time::HiRes::gettimeofday() ];
-
-$m->comp( '/Elements/SetupSessionCookie', %ARGS );
-
-unless ( $session{'CurrentUser'} && $session{'CurrentUser'}->Id ) {
+ (!$type)
+ ? Encode::is_utf8($_) ? $_ : Encode::decode(utf8 => $_, Encode::FB_PERLQQ) :
+ ($type eq 'ARRAY')
+ ? [ map { (ref($_) or Encode::is_utf8($_)) ? $_ : Encode::decode(utf8 => $_, Encode::FB_PERLQQ) } @$_ ] :
+ ($type eq 'HASH')
+ ? { map { (ref($_) or Encode::is_utf8($_)) ? $_ : Encode::decode(utf8 => $_, Encode::FB_PERLQQ) } %$_ } : $_
+ } %ARGS;
+
+$m->{'rt_base_time'} = [Time::HiRes::gettimeofday()];
+
+$m->comp('/Elements/SetupSessionCookie', %ARGS);
+
+unless ($session{'CurrentUser'} && $session{'CurrentUser'}->Id) {
$session{'CurrentUser'} = RT::CurrentUser->new();
}
$r->content_type("text/html; charset=utf-8");
# If it's a noauth file, don't ask for auth.
-if ( $m->base_comp->path =~ $RT::WebNoAuthRegex ) {
- $m->comp( { base_comp => $m->request_comp }, $m->fetch_next, %ARGS);
- $m->abort;
+if ($m->base_comp->path =~ $RT::WebNoAuthRegex )
+{
+ $m->call_next(%ARGS);
+ $m->abort();
}
# If RT is configured for external auth, let's go through and get REMOTE_USER
-elsif ($RT::WebExternalAuth) {
+elsif ( $RT::WebExternalAuth ) {
# do we actually have a REMOTE_USER equivlent?
if ( RT::Interface::Web::WebCanonicalizeInfo() ) {
- my $orig_user = $user;
-
- $user = RT::Interface::Web::WebCanonicalizeInfo();
- $session{'CurrentUser'} = RT::CurrentUser->new();
- my $load_method = $RT::WebExternalGecos ? 'LoadByGecos' : 'Load';
-
- if ( $^O eq 'MSWin32' and $RT::WebExternalGecos ) {
- my $NodeName = Win32::NodeName();
- $user =~ s/^\Q$NodeName\E\\//i;
- }
-
- $session{'CurrentUser'}->$load_method($user);
-
- if ( $RT::WebExternalAuto and !$session{'CurrentUser'}->Id() ) {
-
- # Create users on-the-fly
-
- my $UserObj = RT::User->new( RT::CurrentUser->new('RT_System') );
-
- my ( $val, $msg ) = $UserObj->Create(
- %{ ref($RT::AutoCreate) ? $RT::AutoCreate : {} },
- Name => $user,
- Gecos => $user,
- );
-
- if ($val) {
-
- # now get user specific information, to better create our user.
- my $new_user_info
- = RT::Interface::Web::WebExternalAutoInfo($user);
-
- # set the attributes that have been defined.
- # FIXME: this is a horrible kludge. I'm sure there's something cleaner
- foreach my $attribute (
- 'Name', 'Comments',
- 'Signature', 'EmailAddress',
- 'PagerEmailAddress', 'FreeformContactInfo',
- 'Organization', 'Disabled',
- 'Privileged', 'RealName',
- 'NickName', 'Lang',
- 'EmailEncoding', 'WebEncoding',
- 'ExternalContactInfoId', 'ContactInfoSystem',
- 'ExternalAuthId', 'Gecos',
- 'HomePhone', 'WorkPhone',
- 'MobilePhone', 'PagerPhone',
- 'Address1', 'Address2',
- 'City', 'State',
- 'Zip', 'Country'
- )
- {
- $m->comp( '/Elements/Callback', %ARGS,
- _CallbackName => 'NewUser' );
-
- my $method = "Set$attribute";
- $UserObj->$method( $new_user_info->{$attribute} )
- if ( defined $new_user_info->{$attribute} );
- }
- $session{'CurrentUser'}->Load($user);
- }
- else {
-
- # we failed to successfully create the user. abort abort abort.
- delete $session{'CurrentUser'};
- $m->abort() unless $RT::WebFallbackToInternalAuth;
- $m->comp( '/Elements/Login', %ARGS,
- Error => loc( 'Cannot create user: [_1]', $msg ) );
- }
- }
-
- unless ( $session{'CurrentUser'}->Id() ) {
- delete $session{'CurrentUser'};
- $user = $orig_user;
-
- if ($RT::WebExternalOnly) {
- $m->comp( '/Elements/Login', %ARGS,
- Error => loc('You are not an authorized user') );
- $m->abort();
- }
- }
+ my $orig_user = $user;
+
+ $user = RT::Interface::Web::WebCanonicalizeInfo();
+ $session{'CurrentUser'} = RT::CurrentUser->new();
+ my $load_method = $RT::WebExternalGecos ? 'LoadByGecos' : 'Load';
+
+ if ($^O eq 'MSWin32' and $RT::WebExternalGecos) {
+ my $NodeName = Win32::NodeName();
+ $user =~ s/^\Q$NodeName\E\\//i;
+ }
+
+ $session{'CurrentUser'}->$load_method($user);
+
+ if ($RT::WebExternalAuto and !$session{'CurrentUser'}->Id() ) {
+ # Create users on-the-fly
+
+ my $UserObj = RT::User->new(RT::CurrentUser->new('RT_System'));
+
+ my ($val, $msg) = $UserObj->Create(
+ %{ref($RT::AutoCreate) ? $RT::AutoCreate : {}},
+ Name => $user,
+ Gecos => $user,
+ );
+
+ if ($val) {
+
+ # now get user specific information, to better create our user.
+ my $new_user_info = RT::Interface::Web::WebExternalAutoInfo($user);
+
+ # set the attributes that have been defined.
+ # FIXME: this is a horrible kludge. I'm sure there's something cleaner
+ foreach my $attribute ('Name', 'Comments', 'Signature', 'EmailAddress',
+ 'PagerEmailAddress', 'FreeformContactInfo',
+ 'Organization', 'Disabled', 'Privileged',
+ 'RealName', 'NickName', 'Lang', 'EmailEncoding',
+ 'WebEncoding', 'ExternalContactInfoId',
+ 'ContactInfoSystem', 'ExternalAuthId', 'Gecos',
+ 'HomePhone', 'WorkPhone', 'MobilePhone',
+ 'PagerPhone', 'Address1', 'Address2', 'City',
+ 'State', 'Zip', 'Country') {
+ $m->comp('/Elements/Callback', %ARGS, _CallbackName => 'NewUser');
+
+ my $method = "Set$attribute";
+ $UserObj->$method($new_user_info->{$attribute})
+ if( defined $new_user_info->{$attribute} );
+ }
+ $session{'CurrentUser'}->Load($user);
+ }
+ else {
+ # we failed to successfully create the user. abort abort abort.
+ delete $session{'CurrentUser'};
+ $m->abort() unless $RT::WebFallbackToInternalAuth;
+ $m->comp('/Elements/Login', %ARGS,
+ Error=> loc('Cannot create user: [_1]', $msg));
+ }
+ }
+
+ unless ( $session{'CurrentUser'}->Id() ) {
+ delete $session{'CurrentUser'};
+ $user = $orig_user;
+
+ if ( $RT::WebExternalOnly ) {
+ $m->comp('/Elements/Login', %ARGS,
+ Error=> loc('You are not an authorized user'));
+ $m->abort();
+ }
+ }
}
elsif ($RT::WebFallbackToInternalAuth) {
- unless ( defined( $session{'CurrentUser'} ) ) {
- $m->comp( '/Elements/Login', %ARGS,
- Error => loc('You are not an authorized user') );
- $m->abort();
- }
- }
- else {
-
- # WebExternalAuth is set, but we don't have a REMOTE_USER. abort
- delete $session{'CurrentUser'} if defined $session{'CurrentUser'};
+ unless (defined($session{'CurrentUser'})) {
+ $m->comp('/Elements/Login', %ARGS,
+ Error=> loc('You are not an authorized user'));
+ $m->abort();
+ }
+ } else {
+ # WebExternalAuth is set, but we don't have a REMOTE_USER. abort
+ delete $session{'CurrentUser'} if defined $session{'CurrentUser'};
}
}
delete $session{'CurrentUser'}
- unless $session{'CurrentUser'}
- and $session{'CurrentUser'}->Id;
+ unless $session{'CurrentUser'} and defined $session{'CurrentUser'}->Id;
+
# Process per-page authentication callbacks
-$m->comp( '/Elements/Callback', %ARGS, _CallbackName => 'Auth' );
+$m->comp('/Elements/Callback', %ARGS, _CallbackName => 'Auth');
# If the user is logging in, let's authenticate
-if ( !$session{'CurrentUser'} && defined $user && defined $pass ) {
+if (!$session{'CurrentUser'} && defined ($user) && defined ($pass) ){
$session{'CurrentUser'} = RT::CurrentUser->new();
$session{'CurrentUser'}->Load($user);
- unless ( $session{'CurrentUser'}->id
- && $session{'CurrentUser'}->IsPassword($pass) )
+ if (!$session{'CurrentUser'}->id() ||
+ !$session{'CurrentUser'}->IsPassword($pass))
{
delete $session{'CurrentUser'};
- $RT::Logger->error("FAILED LOGIN for $user from $ENV{'REMOTE_ADDR'}");
- $m->comp( '/Elements/Login', %ARGS,
- Error => loc('Your username or password is incorrect') );
- $m->comp( '/Elements/Callback', %ARGS, _CallbackName => 'FailedLogin' );
- $m->abort;
+ $RT::Logger->error("FAILED LOGIN for $user from $ENV{'REMOTE_ADDR'}");
+ $m->comp('/Elements/Login', %ARGS,
+ Error => loc('Your username or password is incorrect'));
+ $m->abort();
}
else {
- $RT::Logger->info(
- "Successful login for $user from $ENV{'REMOTE_ADDR'}");
- $m->comp( '/Elements/Callback', %ARGS, _CallbackName => 'SuccessfulLogin' );
+ $RT::Logger->info("Successful login for $user from $ENV{'REMOTE_ADDR'}");
}
}
-
+
# If we've got credentials, let's serve the file up.
-if ( ( defined $session{'CurrentUser'} )
- and ( $session{'CurrentUser'}->Id ) )
-{
-
+if ( (defined $session{'CurrentUser'}) and
+ ( $session{'CurrentUser'}->Id) ) {
+
# Process per-page global callbacks
- $m->comp( '/Elements/Callback', %ARGS );
+ $m->comp('/Elements/Callback', %ARGS);
# If the user isn't privileged, they can only see SelfService
- if ( not $session{'CurrentUser'}->Privileged ) {
-
- # if the user is trying to access a ticket, redirect them
- if ( $m->request_comp->path =~ '^(/+)Ticket/Display.html'
- and $ARGS{'id'} )
- {
- RT::Interface::Web::Redirect($RT::WebURL."SelfService/Display.html?id=".$ARGS{'id'});
- }
-
- # otherwise, drop the user at the SelfService default page
- elsif ( $m->base_comp->path !~ '^(/+)SelfService/' ) {
- RT::Interface::Web::Redirect($RT::WebURL."SelfService/");
- }
- else {
- $m->comp( { base_comp => $m->request_comp }, $m->fetch_next, %ARGS);
- }
+ if ((! $session{'CurrentUser'}->Privileged) and
+ ($m->base_comp->path !~ '^(/+)SelfService/') ) {
+ $m->comp('/SelfService/index.html');
+ $m->abort();
}
else {
- $m->comp( { base_comp => $m->request_comp }, $m->fetch_next, %ARGS);
+ $m->call_next(%ARGS);
}
}
# If we have no credentials
else {
- $m->comp( '/Elements/Login', %ARGS );
+ $m->comp('/Elements/Login', %ARGS);
$m->abort();
}
-
-if ($RT::StatementLog) {
- my @log = $RT::Handle->SQLStatementLog;
- $RT::Handle->ClearSQLStatementLog;
- for my $stmt (@log) {
- my ( $time, $sql, $bind, $duration ) = @{$stmt};
- my @bind;
- if ( ref $bind ) {
- @bind = @{$bind};
- }
- else {
-
- # Older DBIx-SB
- $duration = $bind;
- }
- $RT::Logger->log(
- level => $RT::StatementLog,
- message => "SQL(" . sprintf( "%.2f", $duration ) . "s): $sql;"
- . (
- @bind ? " [ bound values: @{[map{qq|'$_'|} @bind]} ]" : ""
- )
- );
- }
-}
-
</%INIT>
<& /Elements/Footer, %ARGS &>
<%ARGS>
projects / freeside.git / blobdiff