=item C<$MaxAttachmentSize>
C<$MaxAttachmentSize> sets the maximum size (in bytes) of attachments
-stored in the database.
+stored in the database. This setting is irrelevant unless one of
+$TruncateLongAttachments or $DropLongAttachments (below) are set.
=cut
perl etc/upgrade/generate-rtaddressregexp
-If left blank, RT will generate a regexp for you, based on your
-comment and correspond address settings on your queues; this comes at
-a small cost in start-up speed.
+If left blank, RT will compare each address to your configured
+C<$CorrespondAddress> and C<$CommentAddress> before searching for a
+Queue configured with a matching "Reply Address" or "Comment Address"
+on the Queue Admin page.
=cut
=cut
-Set($ExtractSubjectTagMatch, qr/\[.+? #\d+\]/);
+Set($ExtractSubjectTagMatch, qr/\[[^\]]+? #\d+\]/);
Set($ExtractSubjectTagNoMatch, ( ${RT::EmailSubjectTagRegex}
? qr/\[(?:${RT::EmailSubjectTagRegex}) #\d+\]/
: qr/\[\Q$RT::rtname\E #\d+\]/));
+=item C<$CheckMoreMSMailHeaders>
+
+Some email clients create a plain text version of HTML-formatted
+email to help other clients that read only plain text.
+Unfortunately, the plain text parts sometimes end up with
+doubled newlines and these can then end up in RT. This
+is most often seen in MS Outlook.
+
+Enable this option to have RT check for additional mail headers
+and attempt to identify email from MS Outlook. When detected,
+RT will then clean up double newlines. Note that it may
+clean up intentional double newlines as well.
+
+=cut
+
+Set( $CheckMoreMSMailHeaders, 0);
+
=back
to a temporary file. RT will log the location of the temporary file
so you can extract mail from it afterward.
+On shutdown, RT will clean up the temporary file created when using
+the 'testfile' option. If testing while the RT server is still running,
+you can find the files in the location noted in the log file. If you run
+a tool like C<rt-crontool> however, or if you look after stopping the server,
+the files will have been deleted when the process completed. If you need to
+keep the files for development or debugging, you can manually set
+C<< UNLINK => 0 >> where the testfile config is processed in
+F<lib/RT/Interface/Email.pm>.
+
=cut
#Set($MailCommand, "sendmailpipe");
Warning: If you use this setting, bounced mails will appear to be
incoming mail to the system, thus creating new tickets.
+If the value contains an C<@>, it is assumed to be an email address and used as
+a global envelope sender. Expected usage in this case is to simply set the
+same envelope sender on all mail from RT, without defining
+C<$OverrideOutgoingMailFrom>. If you do define C<$OverrideOutgoingMailFrom>,
+anything specified there overrides the global value (including Default).
+
+This option only works if C<$MailCommand> is set to 'sendmailpipe'.
+
=cut
Set($SetOutgoingMailFrom, 0);
there is no ticket involved, then the value of the C<Default> key will
be used.
-This option is irrelevant unless C<$SetOutgoingMailFrom> is set.
+This option only works if C<$SetOutgoingMailFrom> is enabled and
+C<$MailCommand> is set to 'sendmailpipe'.
=cut
jquery-ui-1.8.4.custom.min.js
jquery-ui-timepicker-addon.js
jquery-ui-patch-datepicker.js
+ jquery.cookie.js
titlebox-state.js
util.js
userautocomplete.js
=cut
-Set($HomepageComponents, [qw(QuickCreate Quicksearch MyCalendar MyAdminQueues MySupportQueues MyReminders RefreshHomepage Dashboards SavedSearches)]);
+Set(
+ $HomepageComponents,
+ [
+ qw(QuickCreate Quicksearch MyCalendar MyAdminQueues MySupportQueues MyReminders RefreshHomepage Dashboards SavedSearches ) # loc_qw
+ ]
+);
=back
OwnerName,
Priority,
'__NEWLINE__',
- '',
+ '__NBSP__',
'<small>__Requestors__</small>',
'<small>__CustomerTags__</small>',
'<small>__CreatedRelative__</small>',
Indexed => 0,
);
+=item C<$DontSearchFileAttachments>
+
+If C<$DontSearchFileAttachments> is set to 1, then uploaded files
+(attachments with file names) are not searched during content
+search.
+
+Note that if you use indexed FTS then named attachments are still
+indexed by default regardless of this option.
+
+=cut
+
+Set($DontSearchFileAttachments, undef);
=item C<$OnlySearchActiveTicketsInSimpleSearch>
If C<$ParseNewMessageForTicketCcs> is set to 1, RT will attempt to
divine Ticket 'Cc' watchers from the To and Cc lines of incoming
-messages. Be forewarned that if you have I<any> addresses which forward
-mail to RT automatically and you enable this option without modifying
-C<$RTAddressRegexp> below, you will get yourself into a heap of trouble.
+messages that create new Tickets. This option does not apply to replies
+or comments on existing Tickets. Be forewarned that if you have I<any>
+addresses which forward mail to RT automatically and you enable this
+option without modifying C<$RTAddressRegexp> below, you will get
+yourself into a heap of trouble.
=cut
=head1 Extra security
-=over 4
-
This is a list of extra security measures to enable that help keep your RT
safe. If you don't know what these mean, you should almost certainly leave the
defaults alone.
+=over 4
+
=item C<$DisallowExecuteCode>
If set to a true value, the C<ExecuteCode> right will be removed from
Set($RestrictLoginReferrer, 0);
-=item C<$ReferrerWhitelist>
+=item C<@ReferrerWhitelist>
This is a list of hostname:port combinations that RT will treat as being
part of RT's domain. This is particularly useful if you access RT as
# 'auto-key-locate' => 'keyserver',
# enables the automatic retrieving of keys when verifying signatures
-# 'auto-key-retrieve' => undef,
+# 'keyserver-options' => 'auto-key-retrieve',
);
=back
Queues =>
q{'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__id__</a>/TITLE:#'}
.q{,'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
- .q{,__Description__,__Address__,__Priority__,__DefaultDueIn__,'__Disabled__,__Lifecycle__},
+ .q{,__Description__,__Address__,__Priority__,__DefaultDueIn__,__Disabled__,__Lifecycle__},
Groups =>
q{'<a href="__WebPath__/Admin/Groups/Modify.html?id=__id__">__id__</a>/TITLE:#'}
This option has been deprecated. You can configure this site-wide
with L</Lifecycles> (see L</Labeling and defining actions>).
+=back
+
=cut
1;
projects / freeside.git / blobdiff