-# $Header: /home/cvs/cvsroot/freeside/rt/Makefile,v 1.1 2002-08-12 06:17:06 ivan Exp $
-# RT is Copyright 1996-2002 Jesse Vincent <jesse@bestpractical.com>
-# It is distributed under the terms of the GNU General Public License, version 2
+# BEGIN BPS TAGGED BLOCK {{{
+#
+# COPYRIGHT:
+#
+# This software is Copyright (c) 1996-2011 Best Practical Solutions, LLC
+# <sales@bestpractical.com>
+#
+# (Except where explicitly superseded by other copyright notices)
+#
+#
+# LICENSE:
+#
+# This work is made available to you under the terms of Version 2 of
+# the GNU General Public License. A copy of that license should have
+# been provided with this software, but in any event can be snarfed
+# from www.gnu.org.
+#
+# This work is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 or visit their web page on the internet at
+# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
+#
+#
+# CONTRIBUTION SUBMISSION POLICY:
+#
+# (The following paragraph is not intended to limit the rights granted
+# to you to modify and distribute this software under the terms of
+# the GNU General Public License and is only of importance to you if
+# you choose to contribute your changes and enhancements to the
+# community by submitting them to Best Practical Solutions, LLC.)
+#
+# By intentionally submitting any modifications, corrections or
+# derivatives to this work, or any other work intended for use with
+# Request Tracker, to Best Practical Solutions, LLC, you confirm that
+# you are the copyright holder for those contributions and you grant
+# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
+# royalty-free, perpetual, license to use, copy, create derivative
+# works based on those contributions, and sublicense and distribute
+# those contributions and any derivatives thereof.
+#
+# END BPS TAGGED BLOCK }}}
+#
+# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
+# Have a look at "configure" and "Makefile.in" instead
+#
+
+
+PERL = /usr/bin/perl
+INSTALL = /usr/bin/install -c
+
+RT_LAYOUT = Freeside
-PERL = /usr/bin/perl
+CONFIG_FILE_PATH = /opt/rt3/etc
+CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
+SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
-RT_VERSION_MAJOR = 2
-RT_VERSION_MINOR = 0
-RT_VERSION_PATCH = 14
+RT_VERSION_MAJOR = 3
+RT_VERSION_MINOR = 8
+RT_VERSION_PATCH = 11
-RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
-TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
+RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
+TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
-BRANCH = HEAD
# This is the group that all of the installed files will be chgrp'ed to.
-RTGROUP = rt
+RTGROUP = freeside
# User which should own rt binaries.
# Group that should own all of RT's libraries, generally root.
LIBS_GROUP = bin
+WEB_USER = freeside
+WEB_GROUP = freeside
+APACHECTL = /usr/sbin/apachectl
+
# {{{ Files and directories
# DESTDIR allows you to specify that RT be installed somewhere other than
-# where it will eventually reside
+# where it will eventually reside. DESTDIR _must_ have a trailing slash
+# if it's defined.
DESTDIR =
-# RT_PATH is the name of the directory you want make to install RT in
-# RT must be installed in its own directory (don't set this to /usr/local)
-
-RT_PATH = /opt/rt2
-
-# The rest of these paths are all configurable, but you probably don't want to
-# put them elsewhere
-
-RT_LIB_PATH = $(RT_PATH)/lib
-RT_ETC_PATH = $(RT_PATH)/etc
-RT_CONFIG_PATH = $(RT_ETC_PATH)
-RT_BIN_PATH = $(RT_PATH)/bin
-RT_MAN_PATH = $(RT_PATH)/man
-MASON_HTML_PATH = $(RT_PATH)/WebRT/html
-
-
-# RT allows sites to overlay the default web ui with
-# local customizations Those files can be placed in MASON_LOCAL_HTML_PATH
-MASON_LOCAL_HTML_PATH = $(RT_PATH)/local/WebRT/html
-
-# RT needs to be able to write to MASON_DATA_PATH and MASON_SESSION_PATH
-# RT will create and chown these directories. Don't just set them to /tmp
-MASON_DATA_PATH = $(RT_PATH)/WebRT/data
-MASON_SESSION_PATH = $(RT_PATH)/WebRT/sessiondata
-
-RT_LOG_PATH = /tmp
+RT_PATH = /opt/rt3
+RT_ETC_PATH = /opt/rt3/etc
+RT_BIN_PATH = /opt/rt3/bin
+RT_SBIN_PATH = /opt/rt3/sbin
+RT_LIB_PATH = /opt/rt3/lib
+RT_MAN_PATH = /opt/rt3/man
+RT_VAR_PATH = /opt/rt3/var
+RT_DOC_PATH = /opt/rt3/share/doc
+RT_FONT_PATH = /opt/rt3/share/fonts
+RT_LOCAL_PATH = /opt/rt3/local
+LOCAL_PLUGIN_PATH = /opt/rt3/local/plugins
+LOCAL_ETC_PATH = /opt/rt3/local/etc
+LOCAL_LIB_PATH = /opt/rt3/local/lib
+LOCAL_LEXICON_PATH = /opt/rt3/local/po
+MASON_HTML_PATH = /var/www/freeside/rt
+MASON_LOCAL_HTML_PATH = /opt/rt3/local/html
+MASON_DATA_PATH = /usr/local/etc/freeside/masondata
+MASON_SESSION_PATH = /opt/rt3/var/session_data
+RT_LOG_PATH = /opt/rt3/var/log
# RT_READABLE_DIR_MODE is the mode of directories that are generally meant
# to be accessable
-# The location of your rt configuration file
-RT_CONFIG = $(RT_CONFIG_PATH)/config.pm
-# RT_MODPERL_HANDLER is the mason handler script for mod_perl
-RT_MODPERL_HANDLER = $(RT_BIN_PATH)/webmux.pl
+# {{{ all these define the places that RT's binaries should get installed
+# RT_MODPERL_HANDLER is the mason handler script for mod_perl
+RT_MODPERL_HANDLER = webmux.pl
+# RT_STANDALONE_SERVER is a stand-alone HTTP server
+RT_STANDALONE_SERVER = standalone_httpd
+# RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
+RT_SPEEDYCGI_HANDLER = mason_handler.scgi
# RT_FASTCGI_HANDLER is the mason handler script for FastCGI
-# THIS HANDLER IS NOT CURRENTLY SUPPORTED
-RT_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.fcgi
+RT_FASTCGI_HANDLER = mason_handler.fcgi
+# RT_FASTCGI_SERVER is the FastCGI server
+RT_FASTCGI_SERVER = fastcgi_server
+# RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
+RT_WIN32_FASTCGI_HANDLER = mason_handler.svc
+# RT's CLI
+RT_CLI_BIN = rt
+# RT's mail gateway
+RT_MAILGATE_BIN = rt-mailgate
+# RT's cron tool
+RT_CRON_BIN = rt-crontool
-# RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
-# THIS HANDLER IS NOT CURRENTLY SUPPORTED
-RT_SPEEDYCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.scgi
+# }}}
+
+
+BINARIES = $(RT_MODPERL_HANDLER) \
+ $(RT_MAILGATE_BIN) \
+ $(RT_CLI_BIN) \
+ $(RT_CRON_BIN) \
+ $(RT_STANDALONE_SERVER) \
+ $(RT_SPEEDYCGI_HANDLER) \
+ $(RT_FASTCGI_HANDLER) \
+ $(RT_FASTCGI_SERVER) \
+ $(RT_WIN32_FASTCGI_HANDLER)
+
+
+
+
+
+SYSTEM_BINARIES = rt-attributes-viewer \
+ rt-dump-database \
+ rt-setup-database \
+ rt-email-digest \
+ rt-email-dashboards \
+ rt-email-group-admin \
+ rt-server \
+ rt-session-viewer \
+ rt-test-dependencies \
+ rt-clean-sessions \
+ rt-shredder \
+ rt-validator
+
+
+ETC_FILES = acl.Informix \
+ acl.Pg \
+ acl.Oracle \
+ acl.mysql \
+ acl.Sybase \
+ schema.Informix \
+ schema.Pg \
+ schema.Oracle \
+ schema.mysql-4.0 \
+ schema.mysql-4.1 \
+ schema.Sybase \
+ schema.SQLite \
+ initialdata
-# The following are the names of the various binaries which make up RT
+# }}}
+
+# {{{ Web frontend
-RT_CLI_BIN = $(RT_BIN_PATH)/rt
-RT_CLI_ADMIN_BIN = $(RT_BIN_PATH)/rtadmin
-RT_MAILGATE_BIN = $(RT_BIN_PATH)/rt-mailgate
+WEB_HANDLER = modperl2
# }}}
# DB_TYPE defines what sort of database RT trys to talk to
# "mysql" is known to work.
# "Pg" is known to work
-# "Oracle" is in the early stages of working.
-
-DB_TYPE = mysql
+# "Informix" is known to work
-# DB_HOME is where the Database's commandline tools live. $DB_HOME/bin
-# should contain the binaries themselves, e.g. if "which mysql" gives
-# "/usr/local/mysql/bin/mysql", $DB_HOME should be "/usr/local/mysql"
-
-DB_HOME = /usr
+DB_TYPE = Pg
# Set DBA to the name of a unix account with the proper permissions and
-# environment to run your commandline SQL tools
+# environment to run your commandline SQL sbin
# Set DB_DBA to the name of a DB user with permission to create new databases
-# Set DB_DBA_PASSWORD to that user's password (if you don't, you'll be prompted
-# later)
# For mysql, you probably want 'root'
# For Pg, you probably want 'postgres'
-# For oracle, you want 'system'
+# For Oracle, you want 'system'
+# For Informix, you want 'informix'
-DB_DBA = root
-DB_DBA_PASSWORD =
-
-#
-# Set this to the Fully Qualified Domain Name of your database server.
-# If the database is local, rather than on a remote host, using "localhost"
-# will greatly enhance performance.
+DB_DBA = freeside
DB_HOST = localhost
DB_PORT =
+
+
+
#
# Set this to the canonical name of the interface RT will be talking to the
# database on. If you said that the RT_DB_HOST above was "localhost," this
# set this to the name you want to give to the RT database in
# your database server. For Oracle, this should be the name of your sid
-DB_DATABASE = rt2
-
-# Set this to the name of the rt database user
-
-DB_RT_USER = rt_user
-
-# Set this to the password used by the rt database user
-# *** Change This Before Installation***
-
-DB_RT_PASS = rt_pass
+DB_DATABASE = freeside
+DB_RT_USER = freeside
+DB_RT_PASS =
# }}}
-# {{{ Web configuration
-
-# The user your webserver runs as. needed so that webrt can cache mason
-# objectcode
-
-WEB_USER = www
-WEB_GROUP = rt
-# }}}
+TEST_FILES = t/*.t t/*/*.t
+TEST_VERBOSE = 0
####################################################################
-# No user servicable parts below this line. Frob at your own risk #
-####################################################################
-default:
- @echo "Please read RT's readme before installing. Not doing so could"
- @echo "be dangerous."
+all: default
-install: dirs initialize.$(DB_TYPE) upgrade insert instruct
+default:
+ @echo "Please read RT's README before beginning your installation."
-instruct:
- @echo "Congratulations. RT has been installed. "
- @echo "You must now configure it by editing $(RT_CONFIG)."
- @echo "From here on in, you should refer to the users guide."
-insert: insert-install
- $(PERL) -I$(DESTDIR)/$(RT_ETC_PATH) -I$(DESTDIR)/$(RT_LIB_PATH) $(DESTDIR)/$(RT_ETC_PATH)/insertdata
+instruct:
+ @echo "Congratulations. RT is now installed."
+ @echo ""
+ @echo ""
+ @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
+ @echo ""
+ @echo "(You will definitely need to set RT's database password in "
+ @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
+ @echo "very dangerous. Note that you do not have to manually add a "
+ @echo "database user or set up a database for RT. These actions will be "
+ @echo "taken care of in the next step.)"
+ @echo ""
+ @echo "After that, you need to initialize RT's database by running"
+ @echo " 'make initialize-database'"
-upgrade: dirs config-replace upgrade-noclobber upgrade-instruct
upgrade-instruct:
- @echo "Congratulations. RT has been upgraded. You should now check-over"
- @echo "$(RT_CONFIG) for any necessary site customization. Additionally,"
+ @echo "Congratulations. RT has been upgraded. You should now check over"
+ @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
@echo "you should update RT's system database objects by running "
- @echo " $(RT_ETC_PATH)/insertdata <version>"
- @echo "where <version> is the version of RT you're upgrading from."
+ @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action upgrade"
-upgrade-noclobber: insert-install libs-install html-install bin-install nondestruct
-nondestruct: fixperms
+upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
-testdeps:
- $(PERL) ./tools/testdeps -warn $(DB_TYPE)
+upgrade-noclobber: config-install dirs libs-install html-install bin-install local-install doc-install font-install fixperms
-fixdeps:
- $(PERL) ./tools/testdeps -fix $(DB_TYPE)
+# {{{ dependencies
+
+my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
+testdeps:
+ $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
+
+depends: fixdeps
+fixdeps:
+ $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
-all:
- @echo "Read the readme."
+#}}}
+# {{{ fixperms
fixperms:
# Make the libraries readable
- chmod -R $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)/$(RT_LIB_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(RT_LIB_PATH)
+ chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
+ chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
+ chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
+ chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
- chown -R $(BIN_OWNER) $(DESTDIR)/$(RT_BIN_PATH)
- chgrp -R $(RTGROUP) $(DESTDIR)/$(RT_BIN_PATH)
+ chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH)
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH)
-
- chmod 0755 $(DESTDIR)/$(RT_ETC_PATH)
- chmod 0500 $(DESTDIR)/$(RT_ETC_PATH)/*
+ chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
+ cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
#TODO: the config file should probably be able to have its
- # owner set seperately from the binaries.
- chown -R $(BIN_OWNER) $(DESTDIR)/$(RT_ETC_PATH)
- chgrp -R $(RTGROUP) $(DESTDIR)/$(RT_ETC_PATH)
-
- chmod 0550 $(DESTDIR)/$(RT_CONFIG)
-
- # Make the interfaces executable and setgid rt
- chown $(BIN_OWNER) $(DESTDIR)/$(RT_MAILGATE_BIN) \
- $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CLI_ADMIN_BIN)
-
- chgrp $(RTGROUP) $(DESTDIR)/$(RT_MAILGATE_BIN) \
- $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CLI_ADMIN_BIN)
-
- chmod 0755 $(DESTDIR)/$(RT_MAILGATE_BIN) \
- $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CLI_ADMIN_BIN)
-
- chmod g+s $(DESTDIR)/$(RT_MAILGATE_BIN) \
- $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CLI_ADMIN_BIN)
+ # owner set separately from the binaries.
+ chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
+ chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
+
+ chmod 0440 $(DESTDIR)$(CONFIG_FILE)
+ chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
+ # Make this externally readable
+ chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata
+
+ # Make the system binaries
+ cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
+
+ # Make the system binaries executable also
+ cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
# Make the web ui readable by all.
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
+ chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
+ $(DESTDIR)$(LOCAL_LEXICON_PATH)
+ chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
+ chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
# Make the web ui's data dir writable
- chmod 0770 $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
- chown -R $(WEB_USER) $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
- chgrp -R $(WEB_GROUP) $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
+ chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+ chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+ chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+# }}}
+
+# {{{ dirs
dirs:
- mkdir -p $(DESTDIR)/$(RT_BIN_PATH)
- mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)
- mkdir -p $(DESTDIR)/$(MASON_SESSION_PATH)
- mkdir -p $(DESTDIR)/$(RT_ETC_PATH)
- mkdir -p $(DESTDIR)/$(RT_LIB_PATH)
- mkdir -p $(DESTDIR)/$(MASON_HTML_PATH)
- mkdir -p $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
+# }}}
+
+install: testdeps config-install dirs files-install fixperms instruct
+
+files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install font-install
+
+config-install:
+ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
+ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
+ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
+ @echo "Installed configuration. About to install RT in $(RT_PATH)"
+
+test:
+ $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
+
+parallel-test: test-parallel
+test-parallel:
+ RT_TEST_PARALLEL=1 HARNESS_OPTIONS="j4" $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
+
+regression-install: config-install
+ $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)$(CONFIG_FILE)
+
+# {{{ database-installation
+
+regression-reset-db: force-dropdb
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
+
+initdb :: initialize-database
+
+initialize-database:
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
+
+dropdb:
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password
+
+force-dropdb:
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force
+
+# }}}
+
+# {{{ libs-install
libs-install:
- [ -d $(DESTDIR)/$(RT_LIB_PATH) ] || mkdir $(DESTDIR)/$(RT_LIB_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)/$(RT_LIB_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(RT_LIB_PATH)
- chmod -R $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_LIB_PATH)
- ( cd ./lib; \
- $(PERL) Makefile.PL INSTALLSITELIB=$(DESTDIR)/$(RT_LIB_PATH) \
- INSTALLMAN1DIR=$(DESTDIR)/$(RT_MAN_PATH)/man1 \
- INSTALLMAN3DIR=$(DESTDIR)/$(RT_MAN_PATH)/man3 \
- && make \
- && make test \
- && $(PERL) -p -i -e " s'!!RT_VERSION!!'$(RT_VERSION)'g;" blib/lib/RT.pm ;\
- make install \
- INSTALLSITEMAN1DIR=$(DESTDIR)/$(RT_MAN_PATH)/man1 \
- INSTALLSITEMAN3DIR=$(DESTDIR)/$(RT_MAN_PATH)/man3 \
- )
+ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
+ -( cd lib && find . -type d -print ) | while read dir ; do \
+ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
+ done
+ -( cd lib && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
+ done
+# }}}
+# {{{ html-install
html-install:
- cp -rp ./webrt/* $(DESTDIR)/$(MASON_HTML_PATH)
+ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
+ -( cd share/html && find . -type d -print ) | while read dir ; do \
+ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
+ done
+ -( cd share/html && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
+ done
+# }}}
+# {{{ font-install
+font-install:
+ [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
+ -( cd share/fonts && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
+ done
+# }}}
+# {{{ doc-install
+doc-install:
+ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
+ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
+ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
+ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
+# }}}
-genschema:
- $(PERL) tools/initdb '$(DB_TYPE)' '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_DBA)' '$(DB_DATABASE)' generate
+# {{{ etc-install
+etc-install:
+ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
+ for file in $(ETC_FILES) ; do \
+ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
+ done
+# }}}
-initialize.Pg: createdb initdb.dba acls
+# {{{ sbin-install
-initialize.mysql: createdb acls initdb.rtuser
+sbin-install:
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
+ for file in $(SYSTEM_BINARIES) ; do \
+ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
+ done
-initialize.Oracle: acls initdb.rtuser
+# }}}
-acls:
- cp etc/acl.$(DB_TYPE) '$(DESTDIR)/$(RT_ETC_PATH)/acl.$(DB_TYPE)'
- $(PERL) -p -i -e " s'!!DB_TYPE!!'"$(DB_TYPE)"'g;\
- s'!!DB_HOST!!'"$(DB_HOST)"'g;\
- s'!!DB_RT_PASS!!'"$(DB_RT_PASS)"'g;\
- s'!!DB_RT_HOST!!'"$(DB_RT_HOST)"'g;\
- s'!!DB_RT_USER!!'"$(DB_RT_USER)"'g;\
- s'!!DB_DATABASE!!'"$(DB_DATABASE)"'g;" $(DESTDIR)/$(RT_ETC_PATH)/acl.$(DB_TYPE)
- bin/initacls.$(DB_TYPE) '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_DBA)' '$(DB_DBA_PASSWORD)' '$(DB_DATABASE)' '$(DESTDIR)/$(RT_ETC_PATH)/acl.$(DB_TYPE)'
+# {{{ bin-install
+bin-install:
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
+ for file in $(BINARIES) ; do \
+ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
+ done
+
+# {{{ local-install
+local-install:
+ -( cd local/html && find . -type d -print ) | while read dir ; do \
+ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
+ done
+ -( cd local/html && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
+ done
+ -( cd local/po && find . -type d -print ) | while read dir ; do \
+ $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
+ done
+ -( cd local/po && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
+ done
+ -( cd local/etc && find . -type d -print ) | while read dir ; do \
+ $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
+ done
+ -( cd local/etc && find . -type f -print ) | while read file ; do \
+ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
+ done
+# }}}
+# {{{ Best Practical Build targets -- no user servicable parts inside
-dropdb:
- $(PERL) tools/initdb '$(DB_TYPE)' '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_DBA)' '$(DB_DATABASE)' drop
+regenerate-catalogs:
+ $(PERL) sbin/extract-message-catalog
+license-tag:
+ $(PERL) sbin/license_tag
-createdb:
- $(PERL) tools/initdb '$(DB_TYPE)' '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_DBA)' '$(DB_DATABASE)' create
-initdb.dba:
- $(PERL) tools/initdb '$(DB_TYPE)' '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_DBA)' '$(DB_DATABASE)' insert
+factory: initialize-database
+ cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
-initdb.rtuser:
- $(PERL) tools/initdb '$(DB_TYPE)' '$(DB_HOME)' '$(DB_HOST)' '$(DB_PORT)' '$(DB_RT_USER)' '$(DB_DATABASE)' insert
+reconfigure:
+ aclocal -I m4
+ autoconf
+ chmod 755 ./configure
+ ./configure
+start-httpd:
+ $(PERL) bin/standalone_httpd &
+start-server:
+ $(PERL) sbin/rt-server &
-insert-install:
- cp -rp ./tools/insertdata \
- $(DESTDIR)/$(RT_ETC_PATH)
- $(PERL) -p -i -e " s'!!RT_ETC_PATH!!'$(RT_ETC_PATH)'g;\
- s'!!RT_LIB_PATH!!'$(RT_LIB_PATH)'g;"\
- $(DESTDIR)/$(RT_ETC_PATH)/insertdata
+apachectl:
+ $(APACHECTL) stop
+ sleep 10
+ $(APACHECTL) start
+ sleep 5
-bin-install:
- cp -p ./bin/webmux.pl $(DESTDIR)/$(RT_MODPERL_HANDLER)
- cp -p ./bin/rt-mailgate $(DESTDIR)/$(RT_MAILGATE_BIN)
- cp -p ./bin/rtadmin $(DESTDIR)/$(RT_CLI_ADMIN_BIN)
- cp -p ./bin/rt $(DESTDIR)/$(RT_CLI_BIN)
- cp -p ./bin/mason_handler.fcgi $(DESTDIR)/$(RT_FASTCGI_HANDLER)
- cp -p ./bin/mason_handler.scgi $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER)
-
- $(PERL) -p -i -e "s'!!RT_PATH!!'"$(RT_PATH)"'g;\
- s'!!PERL!!'"$(PERL)"'g;\
- s'!!RT_VERSION!!'"$(RT_VERSION)"'g;\
- s'!!RT_ETC_PATH!!'"$(RT_CONFIG_PATH)"'g;\
- s'!!RT_LIB_PATH!!'"$(RT_LIB_PATH)"'g;"\
- $(DESTDIR)/$(RT_MODPERL_HANDLER) \
- $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CLI_ADMIN_BIN) \
- $(DESTDIR)/$(RT_MAILGATE_BIN)
-
-
-config-replace:
- -[ -f $(DESTDIR)/$(RT_CONFIG) ] && \
- mv $(DESTDIR)/$(RT_CONFIG) $(DESTDIR)/$(RT_CONFIG).old && \
- chmod 000 $(DESTDIR)/$(RT_CONFIG).old
- cp -rp ./etc/config.pm $(DESTDIR)/$(RT_CONFIG)
- $(PERL) -p -i -e "\
- s'!!DB_TYPE!!'"$(DB_TYPE)"'g;\
- s'!!DB_HOST!!'"$(DB_HOST)"'g;\
- s'!!DB_PORT!!'"$(DB_PORT)"'g;\
- s'!!DB_RT_PASS!!'"$(DB_RT_PASS)"'g;\
- s'!!DB_RT_USER!!'"$(DB_RT_USER)"'g;\
- s'!!DB_DATABASE!!'"$(DB_DATABASE)"'g;\
- s'!!MASON_HTML_PATH!!'"$(MASON_HTML_PATH)"'g;\
- s'!!MASON_LOCAL_HTML_PATH!!'"$(MASON_LOCAL_HTML_PATH)"'g;\
- s'!!MASON_SESSION_PATH!!'"$(MASON_SESSION_PATH)"'g;\
- s'!!MASON_DATA_PATH!!'"$(MASON_DATA_PATH)"'g;\
- s'!!RT_LOG_PATH!!'"$(RT_LOG_PATH)"'g;\
- s'!!RT_VERSION!!'"$(RT_VERSION)"'g;\
- " $(DESTDIR)/$(RT_CONFIG)
-
-
-commit:
- cvs commit
-
-predist: commit
- cvs tag -r $(BRANCH) -F $(TAG)
- rm -rf /tmp/$(TAG)
- cvs co -d /tmp/$(TAG) -r $(TAG) rt
- cd /tmp/$(TAG); chmod 600 Makefile; /usr/local/bin/cvs2cl.pl \
- --no-wrap --separate-header \
- --window 120
- cd /tmp; tar czvf /home/ftp/pub/rt/devel/$(TAG).tar.gz $(TAG)/
- chmod 644 /home/ftp/pub/rt/devel/$(TAG).tar.gz
-
-dist: commit predist
- rm -rf /home/ftp/pub/rt/devel/rt.tar.gz
- ln -s ./$(TAG).tar.gz /home/ftp/pub/rt/devel/rt.tar.gz
-
-
-rpm:
- (cd ..; tar czvf /usr/src/redhat/SOURCES/rt.tar.gz rt)
- rpm -ba etc/rt.spec
+SNAPSHOT=$(shell git describe --tags)
+snapshot:
+ git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
+ ( cd $(SNAPSHOT) && autoconf && PERL=/usr/bin/perl ./configure )
+ tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
+ rm -fr "$(SNAPSHOT)/"
+
+# }}}
projects / freeside.git / blobdiff