FS::svc_CGPRule_Mixin
FS::svc_Radius_Mixin
FS::svc_Tower_Mixin
+ FS::svc_IP_Mixin
FS::svc_Common );
use vars qw( $DEBUG $me $conf $skip_fuzzyfiles
$dir_prefix @shells $usernamemin
$username_noperiod $username_nounderscore $username_nodash
$username_uppercase $username_percent $username_colon
$username_slash $username_equals $username_pound
+ $username_exclamation
$password_noampersand $password_noexclamation
$warning_template $warning_from $warning_subject $warning_mimetype
$warning_cc
$username_slash = $conf->exists('username-slash');
$username_equals = $conf->exists('username-equals');
$username_pound = $conf->exists('username-pound');
+ $username_exclamation = $conf->exists('username-exclamation');
$password_noampersand = $conf->exists('password-noexclamation');
$password_noexclamation = $conf->exists('password-noexclamation');
$dirhash = $conf->config('dirhash') || 0;
|| $self->ut_foreign_key( 'domsvc', 'svc_domain', 'svcnum' )
|| $self->ut_foreign_keyn('pbxsvc', 'svc_pbx', 'svcnum' )
|| $self->ut_foreign_keyn('sectornum','tower_sector','sectornum')
+ || $self->ut_foreign_keyn('routernum','router','routernum')
+ || $self->ut_foreign_keyn('blocknum','addr_block','blocknum')
|| $self->ut_textn('sec_phrase')
|| $self->ut_snumbern('seconds')
|| $self->ut_snumbern('upbytes')
;
return $error if $error;
+ # assign IP address, etc.
+ if ( $conf->exists('svc_acct-ip_addr') ) {
+ my $error = $self->svc_ip_check;
+ return $error if $error;
+ } else { # I think this is correct
+ $self->routernum('');
+ $self->blocknum('');
+ }
+
my $cust_pkg;
local $username_letter = $username_letter;
local $username_uppercase = $username_uppercase;
my $ulen = $usernamemax || $self->dbdef_table->column('username')->length;
- $recref->{username} =~ /^([a-z0-9_\-\.\&\%\:\/\=\#]{$usernamemin,$ulen})$/i
+ $recref->{username} =~ /^([a-z0-9_\-\.\&\%\:\/\=\#\!]{$usernamemin,$ulen})$/i
or return gettext('illegal_username'). " ($usernamemin-$ulen): ". $recref->{username};
$recref->{username} = $1;
unless ( $username_pound ) {
$recref->{username} =~ /\#/ and return $uerror;
}
+ unless ( $username_exclamation ) {
+ $recref->{username} =~ /\!/ and return $uerror;
+ }
$recref->{popnum} =~ /^(\d*)$/ or return "Illegal popnum: ".$recref->{popnum};
unless ( $part_svc->part_svc_column('slipip')->columnflag eq 'F' ) {
if ( $recref->{slipip} eq '' ) {
- $recref->{slipip} = '';
+ $recref->{slipip} = ''; # eh?
} elsif ( $recref->{slipip} eq '0e0' ) {
$recref->{slipip} = '0e0';
} else {
or return "Illegal slipip: ". $self->slipip;
$recref->{slipip} = $1;
}
-
}
#arbitrary RADIUS stuff; allow ut_textn for now
else {
return "invalid password encoding ('".$recref->{_password_encoding}."'";
}
+
$self->SUPER::check;
}
$self->username. '@'. $self->domain(@_);
}
+
=item acct_snarf
Returns an array of FS::acct_snarf records associated with the account.
=cut
+# unused as originally intended, but now by Communigate Pro "RPOP"
sub acct_snarf {
my $self = shift;
qsearch({
=cut
-sub search {
- my ($class, $params) = @_;
+sub _search_svc {
+ my( $class, $params, $from, $where ) = @_;
- my @where = ();
+ #these two should probably move to svc_Domain_Mixin ?
# domain
if ( $params->{'domain'} ) {
my $svc_domain = qsearchs('svc_domain', { 'domain'=>$params->{'domain'} } );
#preserve previous behavior & bubble up an error if $svc_domain not found?
- push @where, 'domsvc = '. $svc_domain->svcnum if $svc_domain;
+ push @$where, 'domsvc = '. $svc_domain->svcnum if $svc_domain;
}
# domsvc
if ( $params->{'domsvc'} =~ /^(\d+)$/ ) {
- push @where, "domsvc = $1";
- }
-
- #unlinked
- push @where, 'pkgnum IS NULL' if $params->{'unlinked'};
-
- #agentnum
- if ( $params->{'agentnum'} =~ /^(\d+)$/ and $1 ) {
- push @where, "cust_main.agentnum = $1";
+ push @$where, "domsvc = $1";
}
- #custnum
- if ( $params->{'custnum'} =~ /^(\d+)$/ and $1 ) {
- push @where, "custnum = $1";
- }
-
- #pkgpart
- if ( $params->{'pkgpart'} && scalar(@{ $params->{'pkgpart'} }) ) {
- #XXX untaint or sql quote
- push @where,
- 'cust_pkg.pkgpart IN ('. join(',', @{ $params->{'pkgpart'} } ). ')';
- }
# popnum
if ( $params->{'popnum'} =~ /^(\d+)$/ ) {
- push @where, "popnum = $1";
+ push @$where, "popnum = $1";
}
- # svcpart
- if ( $params->{'svcpart'} =~ /^(\d+)$/ ) {
- push @where, "svcpart = $1";
- }
+
+ #and these in svc_Tower_Mixin, or maybe we never should have done svc_acct
+ # towers (or, as mark thought, never should have done svc_broadband)
# sector and tower
my @where_sector = $class->tower_sector_sql($params);
- push @where, @where_sector if @where_sector;
-
- # here is the agent virtualization
- #if ($params->{CurrentUser}) {
- # my $access_user =
- # qsearchs('access_user', { username => $params->{CurrentUser} });
- #
- # if ($access_user) {
- # push @where, $access_user->agentnums_sql('table'=>'cust_main');
- # }else{
- # push @where, "1=0";
- # }
- #} else {
- push @where, $FS::CurrentUser::CurrentUser->agentnums_sql(
- 'table' => 'cust_main',
- 'null_right' => 'View/link unlinked services',
- );
- #}
-
- push @where, @{ $params->{'where'} } if $params->{'where'};
-
- my $extra_sql = scalar(@where) ? ' WHERE '. join(' AND ', @where) : '';
-
- my $addl_from = ' LEFT JOIN cust_svc USING ( svcnum ) '.
- ' LEFT JOIN part_svc USING ( svcpart ) '.
- ' LEFT JOIN cust_pkg USING ( pkgnum ) '.
- ' LEFT JOIN cust_main USING ( custnum ) ';
-
- $addl_from .= ' LEFT JOIN tower_sector USING ( sectornum )'
- if @where_sector;
-
- my $count_query = "SELECT COUNT(*) FROM svc_acct $addl_from $extra_sql";
- #if ( keys %svc_acct ) {
- # $count_query .= ' WHERE '.
- # join(' AND ', map "$_ = ". dbh->quote($svc_acct{$_}),
- # keys %svc_acct
- # );
- #}
-
- my $sql_query = {
- 'table' => 'svc_acct',
- 'hashref' => {}, # \%svc_acct,
- 'select' => join(', ',
- 'svc_acct.*',
- 'part_svc.svc',
- 'cust_main.custnum',
- FS::UI::Web::cust_sql_fields($params->{'cust_fields'}),
- ),
- 'addl_from' => $addl_from,
- 'extra_sql' => $extra_sql,
- 'order_by' => $params->{'order_by'},
- 'count_query' => $count_query,
- };
+ if ( @where_sector ) {
+ push @$where, @where_sector;
+ push @$from, ' LEFT JOIN tower_sector USING ( sectornum )';
+ }
}
projects / freeside.git / blobdiff