tax engine refactoring for Avalara and Billsoft tax vendors, #25718

[freeside.git] / FS / FS / cdr.pm

diff --git a/FS/FS/cdr.pm b/FS/FS/cdr.pm
index 3af776b..306dbd0 100644 (file)
--- a/FS/FS/cdr.pm
+++ b/FS/FS/cdr.pm
@@ -161,6 +161,8 @@ following fields are currently supported:
 
 =item cdrbatch
 
+=item detailnum - Link to invoice detail (L<FS::cust_bill_pkg_detail>)
+
 =back
 
 =head1 METHODS
@@ -226,6 +228,7 @@ sub table_info {
         'freesiderewritestatus' => 'Freeside rewrite status',
         'cdrbatch'              => 'Legacy batch',
         'cdrbatchnum'           => 'Batch',
+        'detailnum'             => 'Freeside invoice detail line',
     },
 
   };
@@ -337,8 +340,12 @@ sub check {
 
   #check the foreign keys even?
   #do we want to outright *reject* the CDR?
-  my $error =
-       $self->ut_numbern('acctid');
+  my $error = $self->ut_numbern('acctid');
+  return $error if $error;
+
+  if ( $self->freesidestatus ne 'done' ) {
+    $self->set('detailnum', ''); # can't have this on an unbilled call
+  }
 
   #add a config option to turn these back on if someone needs 'em
   #
@@ -351,8 +358,6 @@ sub check {
   #  # Telstra =1, Optus = 2, RSL COM = 3
   #  || $self->ut_foreign_keyn('carrierid', 'cdr_carrier', 'carrierid' )
 
-  return $error if $error;
-
   $self->SUPER::check;
 }
 
@@ -368,7 +373,14 @@ to inspect other field.
 sub is_tollfree {
   my $self = shift;
   my $field = scalar(@_) ? shift : 'dst';
-  ( $self->$field() =~ /^(\+?1)?8(8|([02-7])\3)/ ) ? 1 : 0;
+  my $country = $conf->config('tollfree-country') || '';
+  if ( $country eq 'AU' ) { 
+    ( $self->$field() =~ /^(\+?61)?(1800|1300)/ ) ? 1 : 0;
+  } elsif ( $country eq 'NZ' ) { 
+    ( $self->$field() =~ /^(\+?64)?(800|508)/ ) ? 1 : 0;
+  } else { #NANPA (US/Canaada)
+    ( $self->$field() =~ /^(\+?1)?8(8|([02-7])\3)/ ) ? 1 : 0;
+  }
 }
 
 =item set_charged_party
@@ -792,8 +804,8 @@ sub rate_prefix {
 
   }
 
+  my $regionnum = $rate_detail->dest_regionnum;
   my $rate_region = $rate_detail->dest_region;
-  my $regionnum = $rate_region->regionnum;
   warn "  found rate for regionnum $regionnum ".
        "and rate detail $rate_detail\n"
     if $DEBUG;
@@ -820,9 +832,10 @@ sub rate_prefix {
   # We don't round _anything_ (except granularizing) 
   # until the final $charge = sprintf("%.2f"...).
 
-  my $seconds_left = $part_pkg->option_cacheable('use_duration')
-                       ? $self->duration
-                       : $self->billsec;
+  my $rated_seconds = $part_pkg->option_cacheable('use_duration')
+                        ? $self->duration
+                        : $self->billsec;
+  my $seconds_left = $rated_seconds;
 
   #no, do this later so it respects (group) included minutes
   #  # charge for the first (conn_sec) seconds
@@ -830,10 +843,15 @@ sub rate_prefix {
   #  $seconds_left -= $seconds; 
   #  $weektime     += $seconds;
   #  my $charge = $rate_detail->conn_charge; 
-  my $seconds = 0;
+  #my $seconds = 0;
   my $charge = 0;
   my $connection_charged = 0;
 
+  # before doing anything else, if there's an upstream multiplier and 
+  # an upstream price, add that to the charge. (usually the rate detail 
+  # will then have a minute charge of zero, but not necessarily.)
+  $charge += ($self->upstream_price || 0) * $rate_detail->upstream_mult_charge;
+
   my $etime;
   while($seconds_left) {
     my $ratetimenum = $rate_detail->ratetimenum; # may be empty
@@ -888,7 +906,7 @@ sub rate_prefix {
       $seconds_left = 0;
     }
 
-    $seconds += $charge_sec;
+    #$seconds += $charge_sec;
 
     if ( $rate_detail->min_included ) {
       # the old, kind of deprecated way to do this:
@@ -981,8 +999,8 @@ sub rate_prefix {
     $price,
     $opt{'svcnum'},
     'rated_pretty_dst'    => $pretty_dst,
-    'rated_regionname'    => $rate_region->regionname,
-    'rated_seconds'       => $seconds,
+    'rated_regionname'    => ($rate_region ? $rate_region->regionname : ''),
+    'rated_seconds'       => $rated_seconds, #$seconds,
     'rated_granularity'   => $rate_detail->sec_granularity, #$granularity
     'rated_ratedetailnum' => $rate_detail->ratedetailnum,
     'rated_classnum'      => $rate_detail->classnum, #rated_ratedetailnum?
@@ -1065,10 +1083,15 @@ sub rate_cost {
   my $rate_detail =
     qsearchs('rate_detail', { 'ratedetailnum' => $self->rated_ratedetailnum } );
 
-  return $rate_detail->min_cost if $self->rated_granularity == 0;
+  my $charge = 0;
+  $charge += ($self->upstream_price || 0) * ($rate_detail->upstream_mult_cost);
 
-  my $minutes = $self->rated_seconds / 60;
-  my $charge = $rate_detail->conn_cost + $minutes * $rate_detail->min_cost;
+  if ( $self->rated_granularity == 0 ) {
+    $charge += $rate_detail->min_cost;
+  } else {
+    my $minutes = $self->rated_seconds / 60;
+    $charge += $rate_detail->conn_cost + $minutes * $rate_detail->min_cost;
+  }
 
   sprintf('%.2f', $charge + .00001 );
 
@@ -1250,7 +1273,7 @@ sub export_formats {
   my $conf = new FS::Conf;
   my $date_format = $conf->config('date_format') || '%m/%d/%Y';
 
-  # call duration in the largest units that accurately reflect the  granularity
+  # call duration in the largest units that accurately reflect the granularity
   my $duration_sub = sub {
     my($cdr, %opt) = @_;
     my $sec = $opt{seconds} || $cdr->billsec;
@@ -1519,8 +1542,8 @@ as keys (for use with batch_import) and "pretty" format names as values.
 
 my %cdr_info;
 foreach my $INC ( @INC ) {
-  warn "globbing $INC/FS/cdr/*.pm\n" if $DEBUG;
-  foreach my $file ( glob("$INC/FS/cdr/*.pm") ) {
+  warn "globbing $INC/FS/cdr/[a-z]*.pm\n" if $DEBUG;
+  foreach my $file ( glob("$INC/FS/cdr/[a-z]*.pm") ) {
     warn "attempting to load CDR format info from $file\n" if $DEBUG;
     $file =~ /\/(\w+)\.pm$/ or do {
       warn "unrecognized file in $INC/FS/cdr/: $file\n";
@@ -1609,7 +1632,7 @@ sub _cdr_date_parse {
     # optionally without seconds
     ($mon, $day, $year, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
     $sec = 0 if !defined($sec);
-  } elsif ( $date  =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d+\.\d+)(\D|$)/ ) {
+   } elsif ( $date  =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})(\.\d+$)/ ) {
     # broadsoft: 20081223201938.314
     ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
   } elsif ( $date  =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})\d+(\D|$)/ ) {