#!@PERL@
-# {{{ BEGIN BPS TAGGED BLOCK
+# BEGIN BPS TAGGED BLOCK {{{
#
# COPYRIGHT:
#
-# This software is Copyright (c) 1996-2004 Best Practical Solutions, LLC
+# This software is Copyright (c) 1996-2009 Best Practical Solutions, LLC
# <jesse@bestpractical.com>
#
# (Except where explicitly superseded by other copyright notices)
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 or visit their web page on the internet at
+# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
#
#
# CONTRIBUTION SUBMISSION POLICY:
# works based on those contributions, and sublicense and distribute
# those contributions and any derivatives thereof.
#
-# }}} END BPS TAGGED BLOCK
+# END BPS TAGGED BLOCK }}}
#
# This is just a basic script that checks to make sure that all
# the modules needed by RT before you can install it.
use strict;
no warnings qw(numeric redefine);
use Getopt::Long;
-use CPAN;
my %args;
my %deps;
-GetOptions(\%args, 'v|verbose', 'install', 'with-MYSQL', 'with-POSTGRESQL|with-pg|with-pgsql', 'with-SQLITE', 'with-ORACLE', 'with-FASTCGI', 'with-SPEEDYCGI', 'with-MODPERL1', 'with-MODPERL2' ,'with-DEV', 'download=s');
-
-if (!keys %args) {
+GetOptions(
+ \%args, 'v|verbose',
+ 'install', 'with-MYSQL',
+ 'with-POSTGRESQL|with-pg|with-pgsql', 'with-SQLITE',
+ 'with-ORACLE', 'with-FASTCGI',
+ 'with-SPEEDYCGI', 'with-MODPERL1',
+ 'with-MODPERL2', 'with-DEV',
+ 'with-STANDALONE',
+ 'download=s',
+ 'repository=s'
+);
+
+unless (keys %args) {
help();
exit(0);
}
-if ($args{'with-MODPERL2'}) {
- warn_modperl2();
-}
-
-$args{'with-MASON'} = 1;
-$args{'with-CORE'} = 1;
-$args{'with-DEV'} =1;
-$args{'with-CLI'} =1;
-$args{'with-MAILGATE'} =1;
-
-sub warn_modperl2 {
- print <<'.';
- NOTE: mod_perl 2.0 isn't quite ready for prime_time just yet;
- Best Practical Solutions strongly recommends that sites use
- Apache 1.3 or FastCGI. If you MUST use mod_perl 2.0 (or 1.99),
- please read the mailing list archives before asking for help.
-.
- sleep 5;
+# Set up defaults
+my %default = (
+ 'with-MASON' => 1,
+ 'with-CORE' => 1,
+ 'with-CLI' => 1,
+ 'with-MAILGATE' => 1,
+ 'with-DEV' => @RT_DEVEL_MODE@,
+ 'with-STANDALONE' => @RT_STANDALONE@,
+);
+$args{$_} = $default{$_} foreach grep !exists $args{$_}, keys %default;
+
+
+{
+ my $section;
+ my %always_show_sections = (
+ perl => 1,
+ users => 1,
+ );
+
+ sub section {
+ my $s = shift;
+ $section = $s;
+ print "$s:\n";
+ }
+
+ my $any_missing = 0;
+ sub found {
+ my $msg = shift;
+ my $test = shift;
+ my $extra = shift;
+
+ $any_missing = 1 unless $test;
+ if ($args{'v'} or not $test or $always_show_sections{$section}) {
+ print "\t$msg...";
+ print $test ? "found" : "MISSING";
+ print "\n";
+ }
+
+ print "\t\t$extra\n" if defined $extra;
+ }
+
+ sub conclude {
+ if ($any_missing) {
+ print "\nSOMETHING WAS MISSING!\n";
+ exit 1;
+ } else {
+ print "\nEverything was found.\n";
+ }
+ }
}
-
sub help {
print <<'.';
--with-sqlite Database interface and driver for SQLite (unsupported)
--with-oracle Database interface for oracle (unsupported)
+ --with-standalone Libraries needed to support the standalone simple pure perl server
--with-fastcgi Libraries needed to support the fastcgi handler
--with-speedycgi Libraries needed to support the speedycgi handler
--with-modperl1 Libraries needed to support the modperl 1 handler
You can also specify -v or --verbose to list the status of all dependencies,
rather than just the missing ones.
+
+The "RT_FIX_DEPS_CMD" environment variable, if set, will be used
+instead of the standard CPAN shell by --install to install any
+required modules. It will be called with the module name, or, if
+"RT_FIX_DEPS_CMD" contains a "%s", will replace the "%s" with the
+module name before calling the program.
.
}
-sub _ {
- map { /(\S+)\s*(\S*)/; $1 => ($2 ? $2 :'') } split ( /\n/, $_[0] );
+sub text_to_hash {
+ my %hash;
+ for my $line ( split /\n/, $_[0] ) {
+ my($key, $value) = $line =~ /(\S+)\s*(\S*)/;
+ $value ||= '';
+ $hash{$key} = $value;
+ }
+
+ return %hash;
}
-$deps{'CORE'} = [ _( << '.') ];
+$deps{'CORE'} = [ text_to_hash( << '.') ];
Digest::base
Digest::MD5 2.27
DBI 1.37
-Test::Inline
Class::ReturnValue 0.40
-DBIx::SearchBuilder 1.01
+Date::Format
+DBIx::SearchBuilder 1.53
Text::Template
File::Spec 0.8
HTML::Entities
HTML::Scrubber 0.08
-Net::Domain
Log::Dispatch 2.0
Locale::Maketext 1.06
Locale::Maketext::Lexicon 0.32
Net::SMTP
Text::Wrapper
Time::ParseDate
+Time::HiRes
File::Temp
-Term::ReadKey
Text::Autoformat
-Text::Quoted 1.3
+Text::Quoted 2.02
Tree::Simple 1.04
+Regexp::Common
Scalar::Util
-Module::Versions::Report
+Module::Versions::Report 1.03
+Cache::Simple::TimedExpiry
+UNIVERSAL::require
+Calendar::Simple
+CSS::Squish 0.06
+Devel::StackTrace 1.19
.
-$deps{'MASON'} = [ _( << '.') ];
-Params::Validate 0.02
-Cache::Cache
-Exception::Class 1.14
+$deps{'MASON'} = [ text_to_hash( << '.') ];
HTML::Mason 1.23
-MLDBM
Errno
-FreezeThaw
Digest::MD5 2.27
CGI::Cookie 1.20
Storable 2.08
Apache::Session 1.53
-XML::RSS
+XML::RSS 1.05
+GD
+GD::Graph
+GD::Text
+Text::WikiFormat 0.76
+CSS::Squish 0.06
+.
+
+$deps{'STANDALONE'} = [ text_to_hash( << '.') ];
+HTTP::Server::Simple 0.07
+HTTP::Server::Simple::Mason 0.09
.
-$deps{'MAILGATE'} = [ _( << '.') ];
+$deps{'MAILGATE'} = [ text_to_hash( << '.') ];
HTML::TreeBuilder
HTML::FormatText
Getopt::Long
LWP::UserAgent
+Pod::Usage
.
-$deps{'CLI'} = [ _( << '.') ];
+$deps{'CLI'} = [ text_to_hash( << '.') ];
Getopt::Long 2.24
+LWP
+HTTP::Request::Common
+Text::ParseWords
+Term::ReadLine
+Term::ReadKey
.
-$deps{'DEV'} = [ _( << '.') ];
-Regexp::Common
-Time::HiRes
+$deps{'DEV'} = [ text_to_hash( << '.') ];
Test::Inline
Apache::Test
HTML::Form
HTML::TokeParser
WWW::Mechanize
+Test::WWW::Mechanize 1.04
+Module::Refresh 0.03
+Test::Expect 0.30
+XML::Simple
+File::Find
.
-$deps{'FASTCGI'} = [ _( << '.') ];
+$deps{'FASTCGI'} = [ text_to_hash( << '.') ];
CGI 2.92
FCGI
CGI::Fast
.
-$deps{'SPEEDYCGI'} = [ _( << '.') ];
+$deps{'SPEEDYCGI'} = [ text_to_hash( << '.') ];
CGI 2.92
CGI::SpeedyCGI
.
-$deps{'MODPERL1'} = [ _( << '.') ];
+$deps{'MODPERL1'} = [ text_to_hash( << '.') ];
CGI 2.92
Apache::Request
Apache::DBI 0.92
.
-$deps{'MODPERL2'} = [ _( << '.') ];
-CGI 2.92
+$deps{'MODPERL2'} = [ text_to_hash( << '.') ];
+CGI 3.10
Apache::DBI
+HTML::Mason 1.31
.
-$deps{'MYSQL'} = [ _( << '.') ];
+$deps{'MYSQL'} = [ text_to_hash( << '.') ];
DBD::mysql 2.1018
.
-$deps{'ORACLE'} = [ _( << '.') ];
+$deps{'ORACLE'} = [ text_to_hash( << '.') ];
DBD::Oracle
.
-$deps{'POSTGRESQL'} = [ _( << '.') ];
-DBD::Pg
+$deps{'POSTGRESQL'} = [ text_to_hash( << '.') ];
+DBD::Pg 1.43
.
-$deps{'SQLITE'} = [ _( << '.') ];
-DBD::SQLite
+$deps{'SQLITE'} = [ text_to_hash( << '.') ];
+DBD::SQLite 1.00
.
if ($args{'download'}) {
- my %modules;
-
- foreach my $key (keys %deps) {
- my @deps = (@{$deps{$key}});
- while (@deps) {
- my $mod = shift @deps;
- my $ver = shift @deps;
- next if ($mod =~ /^(DBD-|Apache-Request)/);
- $modules{$mod} = $ver;
- }
- }
- my @mods = keys %modules;
- CPAN::get();
- my $moddir = $args{'download'};
- foreach my $mod (@mods) {
- $CPAN::Config->{'build_dir'} = $moddir;
- CPAN::get($mod);
- }
-
- opendir(DIR, $moddir);
- while ( my $dir = readdir(DIR)) {
- print "Dir is $dir\n";
- next if ( $dir =~ /^\.\.?$/);
-
- if ($dir =~ /^(.*)-(.*?)$/) {
- print "$1 -- $2\n";
- `svn_load_dirs.pl file:///Users/jesse/mod-repo $1 $moddir/$dir`;
- `rm -rf $moddir/$dir`;
-
- }
-
- }
- closedir(DIR);
- exit;
+ download_mods();
}
-print "perl:\n";
-print "\t5.8.3";
-eval {require 5.008003};
-if ($@) {
- print "...MISSING.\n";
- eval {require 5.008000};
- if ($@) {
- print "\nRT is known to be non-functional on versions of perl older than 5.8.3.\nPlease upgrade to 5.8.3 or newer\n\n";
- die;
- }
+check_perl_version();
- eval {require 5.008003};
- if ($@) {
- print "\nRT is known to be non-functional on versions of perl older than 5.8.3.\nPlease upgrade to 5.8.3 or newer\n\n";
- }
-} else {
- print "...found\n" if $args{'v'};
-}
+check_users();
-print "users:\n";
-print "\trt group (@RTGROUP@)...", (defined getgrnam("@RTGROUP@") ? "found" : "MISSING"), "\n";
-print "\tbin owner (@BIN_OWNER@)...", (defined getpwnam("@BIN_OWNER@") ? "found" : "MISSING"), "\n";
-print "\tlibs owner (@LIBS_OWNER@)...", (defined getpwnam("@LIBS_OWNER@") ? "found" : "MISSING"), "\n";
-print "\tlibs group (@LIBS_GROUP@)...", (defined getgrnam("@LIBS_GROUP@") ? "found" : "MISSING"), "\n";
-print "\tweb owner (@WEB_USER@)...", (defined getpwnam("@WEB_USER@") ? "found" : "MISSING"), "\n";
-print "\tweb group (@WEB_GROUP@)...", (defined getgrnam("@WEB_GROUP@") ? "found" : "MISSING"), "\n";
-foreach my $type (keys %args) {
+foreach my $type (sort grep $args{$_}, keys %args) {
next unless ($type =~ /^with-(.*?)$/);
- my $type = $1;
- print "$type dependencies:\n";
- my @deps = (@{$deps{$type}});
+
+ $type = $1;
+ section("$type dependencies");
+
+ my @missing;
+ my @deps = @{ $deps{$type} };
while (@deps) {
my $module = shift @deps;
my $version = shift @deps;
- my $ret = test_dep($module, $version);
+ my $ret = test_dep($module, $version);
- if ($args{'install'} && !$ret) {
- resolve_dep($module);
+ push @missing, $module, $version unless $ret;
+ }
+ if ( $args{'install'} ) {
+ while( @missing ) {
+ resolve_dep(shift @missing, shift @missing);
}
}
}
+conclude();
+
sub test_dep {
my $module = shift;
my $version = shift;
if ($@) {
my $error = $@;
$error =~ s/\n(.*)$//s;
- print "\t$module $version";
- print "...MISSING\n";
- print "\t\t$error\n" if $error =~ /this is only/;
+ undef $error unless $error =~ /this is only/;
+ found("$module $version", 0, $error);
return undef;
} else {
- print "\t$module $version...found\n" if $args{'v'};
+ my $msg = "$module";
+ $msg .= " >=$version" if $version;
+ found($msg, 1);
return 1;
}
}
sub resolve_dep {
my $module = shift;
- use CPAN;
- CPAN::Shell->install($module);
-}
+ my $version = shift;
+
+ print "\nInstall module $module\n";
+
+ my $ext = $ENV{'RT_FIX_DEPS_CMD'};
+ unless( $ext ) {
+ my $configured = 1;
+ {
+ local @INC = @INC;
+ if ( $ENV{'HOME'} ) {
+ unshift @INC, "$ENV{'HOME'}/.cpan";
+ }
+ $configured = eval { require CPAN::MyConfig } || eval { require CPAN::Config };
+ }
+ unless ( $configured ) {
+ print <<END;
+You didn't configure CPAN shell yet.
+Please run `@PERL@ -MCPAN -e shell` tool and configure it.
+END
+ exit(1);
+ }
+ my $rv = eval { require CPAN; CPAN::Shell->install($module) };
+ return $rv unless $@;
+
+ print <<END;
+Failed to load module CPAN.
+
+-------- Error ---------
+$@
+------------------------
+
+When we tried to start installing RT's perl dependencies,
+we were unable to load the CPAN client. This module is usually distributed
+with Perl. This usually indicates that your vendor has shipped an unconfigured
+or incorrectly configured CPAN client.
+The error above may (or may not) give you a hint about what went wrong
+
+You have several choices about how to install dependencies in
+this situatation:
+
+1) use a different tool to install dependencies by running setting the following
+ shell environment variable and rerunning this tool:
+ RT_FIX_DEPS_CMD='@PERL@ -MCPAN -e"install %s"'
+2) Attempt to configure CPAN by running:
+ `@PERL@ -MCPAN -e shell` program from shell.
+ If this fails, you may have to manually upgrade CPAN (see below)
+3) Try to update the CPAN client. Download it from:
+ http://search.cpan.org/dist/CPAN and try again
+4) Install each dependency manually by downloading them one by one from
+ http://search.cpan.org
+
+END
+ exit(1);
+ }
+ if( $ext =~ /\%s/) {
+ $ext =~ s/\%s/$module/g; # sprintf( $ext, $module );
+ } else {
+ $ext .= " $module";
+ }
+ print "\t\tcommand: '$ext'\n";
+ return scalar `$ext 1>&2`;
+}
-sub print_help {
- print << "EOF";
+sub download_mods {
+ my %modules;
+ use CPAN;
+
+ foreach my $key (keys %deps) {
+ my @deps = (@{$deps{$key}});
+ while (@deps) {
+ my $mod = shift @deps;
+ my $ver = shift @deps;
+ next if ($mod =~ /^(DBD-|Apache-Request)/);
+ $modules{$mod} = $ver;
+ }
+ }
+ my @mods = keys %modules;
+ CPAN::get();
+ my $moddir = $args{'download'};
+ foreach my $mod (@mods) {
+ $CPAN::Config->{'build_dir'} = $moddir;
+ CPAN::get($mod);
+ }
-$0 FLAG DBTYPE
+ opendir(DIR, $moddir);
+ while ( my $dir = readdir(DIR)) {
+ print "Dir is $dir\n";
+ next if ( $dir =~ /^\.\.?$/);
+ # Skip things we've previously tagged
+ my $out = `svn ls $args{'repository'}/tags/$dir`;
+ next if ($out);
-$0 is a tool for RT that will tell you if you've got all
-the modules RT depends on properly installed.
+ if ($dir =~ /^(.*)-(.*?)$/) {
+ `svn_load_dirs -no_user_input -t tags/$dir -v $args{'repository'} dists/$1 $moddir/$dir`;
+ `rm -rf $moddir/$dir`;
-Flags: (only one flag is valid for a given run)
+ }
--quiet will check to see if we've got everything we need
- and will exit with a return code of (1) if we don't.
+ }
+ closedir(DIR);
+ exit;
+}
--warn will tell you what isn't properly installed
+sub check_perl_version {
+ section("perl");
+ eval {require 5.008003};
+ if ($@) {
+ found("5.8.3", 0,"RT is known to be non-functional on versions of perl older than 5.8.3. Please upgrade to 5.8.3 or newer.");
+ exit(1);
+ } else {
+ found( ">=5.8.3($])", 1);
+ }
+}
--fix will use CPANPLUS.pm or CPAN.pm to magically make everything better
+sub check_users {
+ section("users");
+ found("rt group (@RTGROUP@)", defined getgrnam("@RTGROUP@"));
+ found("bin owner (@BIN_OWNER@)", defined getpwnam("@BIN_OWNER@"));
+ found("libs owner (@LIBS_OWNER@)", defined getpwnam("@LIBS_OWNER@"));
+ found("libs group (@LIBS_GROUP@)", defined getgrnam("@LIBS_GROUP@"));
+ found("web owner (@WEB_USER@)", defined getpwnam("@WEB_USER@"));
+ found("web group (@WEB_GROUP@)", defined getgrnam("@WEB_GROUP@"));
+}
-DBTYPE is one of:
- oracle, pg, mysql
-EOF
- exit(0);
-}
+1;