-# BEGIN LICENSE BLOCK
+# BEGIN BPS TAGGED BLOCK {{{
#
-# Copyright (c) 1996-2002 Jesse Vincent <jesse@bestpractical.com>
+# COPYRIGHT:
#
-# (Except where explictly superceded by other copyright notices)
+# This software is Copyright (c) 1996-2009 Best Practical Solutions, LLC
+# <jesse@bestpractical.com>
+#
+# (Except where explicitly superseded by other copyright notices)
+#
+#
+# LICENSE:
#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
-# from www.gnu.org
+# from www.gnu.org.
#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 or visit their web page on the internet at
+# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
+#
+#
+# CONTRIBUTION SUBMISSION POLICY:
#
-# Unless otherwise specified, all modifications, corrections or
-# extensions to this work which alter its source code become the
-# property of Best Practical Solutions, LLC when submitted for
-# inclusion in the work.
+# (The following paragraph is not intended to limit the rights granted
+# to you to modify and distribute this software under the terms of
+# the GNU General Public License and is only of importance to you if
+# you choose to contribute your changes and enhancements to the
+# community by submitting them to Best Practical Solutions, LLC.)
#
+# By intentionally submitting any modifications, corrections or
+# derivatives to this work, or any other work intended for use with
+# Request Tracker, to Best Practical Solutions, LLC, you confirm that
+# you are the copyright holder for those contributions and you grant
+# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
+# royalty-free, perpetual, license to use, copy, create derivative
+# works based on those contributions, and sublicense and distribute
+# those contributions and any derivatives thereof.
#
-# END LICENSE BLOCK
+# END BPS TAGGED BLOCK }}}
+use strict;
+use warnings;
package RT;
-use strict;
-use RT::I18N;
-use RT::CurrentUser;
-use RT::System;
-
-use vars qw($VERSION $System $SystemUser $Nobody $Handle $Logger
- $CORE_CONFIG_FILE
- $SITE_CONFIG_FILE
- $BasePath
- $EtcPath
- $VarPath
- $LocalPath
- $LocalEtcPath
- $LocalLexiconPath
- $LogDir
- $MasonComponentRoot
- $MasonLocalComponentRoot
- $MasonDataDir
- $MasonSessionDir
-);
-
-$VERSION = '@RT_VERSION_MAJOR@.@RT_VERSION_MINOR@.@RT_VERSION_PATCH@';
-$CORE_CONFIG_FILE = "@CONFIG_FILE_PATH@/RT_Config.pm";
-$SITE_CONFIG_FILE = "@CONFIG_FILE_PATH@/RT_SiteConfig.pm";
-
-$BasePath = '@RT_PATH@';
-
-$EtcPath = '@RT_ETC_PATH@';
-$VarPath = '@RT_VAR_PATH@';
-$LocalPath = '@RT_LOCAL_PATH@';
-$LocalEtcPath = '@LOCAL_ETC_PATH@';
-$LocalLexiconPath = '@LOCAL_LEXICON_PATH@';
+
+
+use File::Spec ();
+use Cwd ();
+
+use vars qw($Config $System $SystemUser $Nobody $Handle $Logger $_INSTALL_MODE);
+
+our $VERSION = '@RT_VERSION_MAJOR@.@RT_VERSION_MINOR@.@RT_VERSION_PATCH@';
+
+@DATABASE_ENV_PREF@
+
+our $BasePath = '@RT_PATH@';
+our $EtcPath = '@RT_ETC_PATH@';
+our $BinPath = '@RT_BIN_PATH@';
+our $SbinPath = '@RT_SBIN_PATH@';
+our $VarPath = '@RT_VAR_PATH@';
+our $PluginPath = '@RT_PLUGIN_PATH@';
+our $LocalPath = '@RT_LOCAL_PATH@';
+our $LocalEtcPath = '@LOCAL_ETC_PATH@';
+our $LocalLibPath = '@LOCAL_LIB_PATH@';
+our $LocalLexiconPath = '@LOCAL_LEXICON_PATH@';
+our $LocalPluginPath = $LocalPath."/plugins";
+
# $MasonComponentRoot is where your rt instance keeps its mason html files
-$MasonComponentRoot = '@MASON_HTML_PATH@';
+our $MasonComponentRoot = '@MASON_HTML_PATH@';
# $MasonLocalComponentRoot is where your rt instance keeps its site-local
# mason html files.
-$MasonLocalComponentRoot = '@MASON_LOCAL_HTML_PATH@';
+our $MasonLocalComponentRoot = '@MASON_LOCAL_HTML_PATH@';
# $MasonDataDir Where mason keeps its datafiles
-$MasonDataDir = '@MASON_DATA_PATH@';
+our $MasonDataDir = '@MASON_DATA_PATH@';
# RT needs to put session data (for preserving state between connections
# via the web interface)
-$MasonSessionDir = '@MASON_SESSION_PATH@';
+our $MasonSessionDir = '@MASON_SESSION_PATH@';
+
+unless ( File::Spec->file_name_is_absolute($EtcPath) ) {
+
+# if BasePath exists and is absolute, we won't infer it from $INC{'RT.pm'}.
+# otherwise RT.pm will make src dir(where we configure RT) be the BasePath
+# instead of the --prefix one
+ unless ( -d $BasePath && File::Spec->file_name_is_absolute($BasePath) ) {
+ my $pm_path = ( File::Spec->splitpath( $INC{'RT.pm'} ) )[1];
+
+ # need rel2abs here is to make sure path is absolute, since $INC{'RT.pm'}
+ # is not always absolute
+ $BasePath =
+ File::Spec->rel2abs(
+ File::Spec->catdir( $pm_path, File::Spec->updir ) );
+ }
+ $BasePath = Cwd::realpath( $BasePath );
+
+ for my $path ( qw/EtcPath BinPath SbinPath VarPath LocalPath LocalEtcPath
+ LocalLibPath LocalLexiconPath PluginPath LocalPluginPath
+ MasonComponentRoot MasonLocalComponentRoot MasonDataDir
+ MasonSessionDir/ ) {
+ no strict 'refs';
+ # just change relative ones
+ $$path = File::Spec->catfile( $BasePath, $$path )
+ unless File::Spec->file_name_is_absolute( $$path );
+ }
+}
=head1 NAME
- RT - Request Tracker
+RT - Request Tracker
=head1 SYNOPSIS
- A fully featured request tracker package
+A fully featured request tracker package
=head1 DESCRIPTION
+=head2 INITIALIZATION
-=cut
+=head2 LoadConfig
-=item LoadConfig
+Load RT's config file. First, the site configuration file
+(F<RT_SiteConfig.pm>) is loaded, in order to establish overall site
+settings like hostname and name of RT instance. Then, the core
+configuration file (F<RT_Config.pm>) is loaded to set fallback values
+for all settings; it bases some values on settings from the site
+configuration file.
-Load RT's config file. First, go after the core config file.
-After that, go after the site config.
+In order for the core configuration to not override the site's
+settings, the function C<Set> is used; it only sets values if they
+have not been set already.
=cut
sub LoadConfig {
- local *Set = sub { $_[0] = $_[1] unless defined $_[0] };
- if ( -f "$SITE_CONFIG_FILE" ) {
- require $SITE_CONFIG_FILE
- || die ("Couldn't load RT config file '$SITE_CONFIG_FILE'\n$@");
+ require RT::Config;
+ $Config = new RT::Config;
+ $Config->LoadConfigs;
+ require RT::I18N;
+
+ # RT::Essentials mistakenly recommends that WebPath be set to '/'.
+ # If the user does that, do what they mean.
+ $RT::WebPath = '' if ($RT::WebPath eq '/');
+
+ # fix relative LogDir and GnuPG homedir
+ unless ( File::Spec->file_name_is_absolute( $Config->Get('LogDir') ) ) {
+ $Config->Set( LogDir =>
+ File::Spec->catfile( $BasePath, $Config->Get('LogDir') ) );
}
- require $CORE_CONFIG_FILE
- || die ("Couldn't load RT config file '$CORE_CONFIG_FILE'\n$@");
+
+ my $gpgopts = $Config->Get('GnuPGOptions');
+ unless ( File::Spec->file_name_is_absolute( $gpgopts->{homedir} ) ) {
+ $gpgopts->{homedir} = File::Spec->catfile( $BasePath, $gpgopts->{homedir} );
+ }
+
RT::I18N->Init;
}
-=item Init
+=head2 Init
+
+L<Connect to the database /ConnectToDatabase>, L<initilizes system objects /InitSystemObjects>,
+L<preloads classes /InitClasses> and L<set up logging /InitLogging>.
- Conenct to the database, set up logging.
-
=cut
sub Init {
+ my @arg = @_;
+
+ CheckPerlRequirements();
+
+ InitPluginPaths();
+
#Get a database connection
ConnectToDatabase();
+ InitSystemObjects();
+ InitClasses();
+ InitLogging(@arg);
+ InitPlugins();
+ RT->Config->PostLoadCheck;
- #RT's system user is a genuine database user. its id lives here
- $SystemUser = new RT::CurrentUser();
- $SystemUser->LoadByName('RT_System');
-
- #RT's "nobody user" is a genuine database user. its ID lives here.
- $Nobody = new RT::CurrentUser();
- $Nobody->LoadByName('Nobody');
-
- $System = RT::System->new();
-
- InitLogging();
}
-
=head2 ConnectToDatabase
-Get a database connection
+Get a database connection. See also </Handle>.
=cut
-
+
sub ConnectToDatabase {
require RT::Handle;
- unless ($Handle && $Handle->dbh && $Handle->dbh->ping) {
- $Handle = RT::Handle->new();
- }
- $Handle->Connect();
+ $Handle = new RT::Handle unless $Handle;
+ $Handle->Connect;
+ return $Handle;
}
-
+
=head2 InitLogging
-Create the RT::Logger object.
+Create the Logger object and set up signal handlers.
=cut
+
sub InitLogging {
- # We have to set the record seperator ($, man perlvar)
+ my %arg = @_;
+
+ # We have to set the record separator ($, man perlvar)
# or Log::Dispatch starts getting
# really pissy, as some other module we use unsets it.
-
$, = '';
use Log::Dispatch 1.6;
- unless ($RT::Logger) {
-
- $RT::Logger=Log::Dispatch->new();
-
- if ($RT::LogToFile) {
- my ($filename, $logdir);
- if ($RT::LogToFileNamed =~ m![/\\]!) {
- # looks like an absolute path.
- $filename = $RT::LogToFileNamed;
- ($logdir) = $RT::LogToFileNamed =~ m!^(.*[/\\])!;
- }
- else {
- $filename = "$RT::LogDir/$RT::LogToFileNamed";
- $logdir = $RT::LogDir;
- }
-
- unless ( -d $logdir && ( ( -f $filename && -w $filename ) || -w $logdir ) ) {
- # localizing here would be hard when we don't have a current user yet
- # die $self->loc("Log directory [_1] not found or couldn't be written.\n RT can't run.", $RT::LogDir);
- die ("Log file $filename couldn't be written or created.\n RT can't run.");
- }
-
- require Log::Dispatch::File;
-
-
- $RT::Logger->add(Log::Dispatch::File->new
- ( name=>'rtlog',
- min_level=> $RT::LogToFile,
- filename=> $filename,
- mode=>'append',
- callbacks => sub { my %p = @_;
- my ($package, $filename, $line) = caller(5);
- return "[".gmtime(time)."] [".$p{level}."]: $p{message} ($filename:$line)\n"}
-
-
-
- ));
- }
- if ($RT::LogToScreen) {
- require Log::Dispatch::Screen;
- $RT::Logger->add(Log::Dispatch::Screen->new
- ( name => 'screen',
- min_level => $RT::LogToScreen,
- callbacks => sub { my %p = @_;
- my ($package, $filename, $line) = caller(5);
- return "[".gmtime(time)."] [".$p{level}."]: $p{message} ($filename:$line)\n"
- },
-
- stderr => 1
- ));
- }
- if ($RT::LogToSyslog) {
- require Log::Dispatch::Syslog;
- $RT::Logger->add(Log::Dispatch::Syslog->new
- ( name => 'syslog',
- ident => 'RT',
- min_level => $RT::LogToSyslog,
- callbacks => sub { my %p = @_;
- my ($package, $filename, $line) = caller(5);
-
- # syswrite() cannot take utf8; turn it off here.
- Encode::_utf8_off($p{message});
-
- if ($p{level} eq 'debug') {
-
- return "$p{message}\n" }
- else {
- return "$p{message} ($filename:$line)\n"}
- },
-
- stderr => 1,
- @RT::LogToSyslogConf
- ));
+ my %level_to_num = (
+ map( { $_ => } 0..7 ),
+ debug => 0,
+ info => 1,
+ notice => 2,
+ warning => 3,
+ error => 4, 'err' => 4,
+ critical => 5, crit => 5,
+ alert => 6,
+ emergency => 7, emerg => 7,
+ );
+
+ unless ( $RT::Logger ) {
+
+ $RT::Logger = Log::Dispatch->new;
+
+ my $stack_from_level;
+ if ( $stack_from_level = RT->Config->Get('LogStackTraces') ) {
+ # if option has old style '\d'(true) value
+ $stack_from_level = 0 if $stack_from_level =~ /^\d+$/;
+ $stack_from_level = $level_to_num{ $stack_from_level } || 0;
+ } else {
+ $stack_from_level = 99; # don't log
+ }
+
+ my $simple_cb = sub {
+ # if this code throw any warning we can get segfault
+ no warnings;
+ my %p = @_;
+
+ # skip Log::* stack frames
+ my $frame = 0;
+ $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
+ my ($package, $filename, $line) = caller($frame);
+
+ $p{'message'} =~ s/(?:\r*\n)+$//;
+ return "[". gmtime(time) ."] [". $p{'level'} ."]: "
+ . $p{'message'} ." ($filename:$line)\n";
+ };
+
+ my $syslog_cb = sub {
+ # if this code throw any warning we can get segfault
+ no warnings;
+ my %p = @_;
+
+ my $frame = 0; # stack frame index
+ # skip Log::* stack frames
+ $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
+ my ($package, $filename, $line) = caller($frame);
+
+ # syswrite() cannot take utf8; turn it off here.
+ Encode::_utf8_off($p{message});
+
+ $p{message} =~ s/(?:\r*\n)+$//;
+ if ($p{level} eq 'debug') {
+ return "$p{message}\n";
+ } else {
+ return "$p{message} ($filename:$line)\n";
+ }
+ };
+
+ my $stack_cb = sub {
+ no warnings;
+ my %p = @_;
+ return $p{'message'} unless $level_to_num{ $p{'level'} } >= $stack_from_level;
+
+ require Devel::StackTrace;
+ my $trace = Devel::StackTrace->new( ignore_class => [ 'Log::Dispatch', 'Log::Dispatch::Base' ] );
+ return $p{'message'} . $trace->as_string;
+
+ # skip calling of the Log::* subroutins
+ my $frame = 0;
+ $frame++ while caller($frame) && caller($frame) =~ /^Log::/;
+ $frame++ while caller($frame) && (caller($frame))[3] =~ /^Log::/;
+
+ $p{'message'} .= "\nStack trace:\n";
+ while( my ($package, $filename, $line, $sub) = caller($frame++) ) {
+ $p{'message'} .= "\t$sub(...) called at $filename:$line\n";
+ }
+ return $p{'message'};
+ };
+
+ if ( $Config->Get('LogToFile') ) {
+ my ($filename, $logdir) = (
+ $Config->Get('LogToFileNamed') || 'rt.log',
+ $Config->Get('LogDir') || File::Spec->catdir( $VarPath, 'log' ),
+ );
+ if ( $filename =~ m![/\\]! ) { # looks like an absolute path.
+ ($logdir) = $filename =~ m{^(.*[/\\])};
+ }
+ else {
+ $filename = File::Spec->catfile( $logdir, $filename );
+ }
+
+ unless ( -d $logdir && ( ( -f $filename && -w $filename ) || -w $logdir ) ) {
+ # localizing here would be hard when we don't have a current user yet
+ die "Log file '$filename' couldn't be written or created.\n RT can't run.";
+ }
+
+ require Log::Dispatch::File;
+ $RT::Logger->add( Log::Dispatch::File->new
+ ( name=>'file',
+ min_level=> $Config->Get('LogToFile'),
+ filename=> $filename,
+ mode=>'append',
+ callbacks => [ $simple_cb, $stack_cb ],
+ ));
+ }
+ if ( $Config->Get('LogToScreen') ) {
+ require Log::Dispatch::Screen;
+ $RT::Logger->add( Log::Dispatch::Screen->new
+ ( name => 'screen',
+ min_level => $Config->Get('LogToScreen'),
+ callbacks => [ $simple_cb, $stack_cb ],
+ stderr => 1,
+ ));
+ }
+ if ( $Config->Get('LogToSyslog') ) {
+ require Log::Dispatch::Syslog;
+ $RT::Logger->add(Log::Dispatch::Syslog->new
+ ( name => 'syslog',
+ ident => 'RT',
+ min_level => $Config->Get('LogToSyslog'),
+ callbacks => [ $syslog_cb, $stack_cb ],
+ stderr => 1,
+ $Config->Get('LogToSyslogConf'),
+ ));
+ }
}
+ InitSignalHandlers(%arg);
+}
- }
+sub InitSignalHandlers {
-# {{{ Signal handlers
+ my %arg = @_;
+# Signal handlers
## This is the default handling of warnings and die'ings in the code
## (including other used modules - maybe except for errors catched by
## Mason). It will log all problems through the standard logging
## mechanism (see above).
-$SIG{__WARN__} = sub {$RT::Logger->warning($_[0])};
+ unless ( $arg{'NoSignalHandlers'} ) {
+
+ $SIG{__WARN__} = sub {
+ # The 'wide character' warnings has to be silenced for now, at least
+ # until HTML::Mason offers a sane way to process both raw output and
+ # unicode strings.
+ # use 'goto &foo' syntax to hide ANON sub from stack
+ if( index($_[0], 'Wide character in ') != 0 ) {
+ unshift @_, $RT::Logger, qw(level warning message);
+ goto &Log::Dispatch::log;
+ }
+ };
+
+ #When we call die, trap it and log->crit with the value of the die.
+
+ $SIG{__DIE__} = sub {
+ # if we are not in eval and perl is not parsing code
+ # then rollback transactions and log RT error
+ unless ($^S || !defined $^S ) {
+ $RT::Handle->Rollback(1) if $RT::Handle;
+ $RT::Logger->crit("$_[0]") if $RT::Logger;
+ }
+ die $_[0];
+ };
-#When we call die, trap it and log->crit with the value of the die.
+ }
+}
-$SIG{__DIE__} = sub {
- unless ($^S || !defined $^S ) {
- $RT::Handle->Rollback();
- $RT::Logger->crit("$_[0]");
- exit(-1);
+
+sub CheckPerlRequirements {
+ if ($^V < 5.008003) {
+ die sprintf "RT requires Perl v5.8.3 or newer. Your current Perl is v%vd\n", $^V;
}
- else {
- #Get out of here if we're in an eval
- die $_[0];
+
+ local ($@);
+ eval {
+ my $x = '';
+ my $y = \$x;
+ require Scalar::Util; Scalar::Util::weaken($y);
+ };
+ if ($@) {
+ die <<"EOF";
+
+RT requires the Scalar::Util module be built with support for the 'weaken'
+function.
+
+It is sometimes the case that operating system upgrades will replace
+a working Scalar::Util with a non-working one. If your system was working
+correctly up until now, this is likely the cause of the problem.
+
+Please reinstall Scalar::Util, being careful to let it build with your C
+compiler. Ususally this is as simple as running the following command as
+root.
+
+ perl -MCPAN -e'install Scalar::Util'
+
+EOF
+
}
-};
+}
-# }}}
+=head2 InitClasses
+Load all modules that define base classes.
+
+=cut
+
+sub InitClasses {
+ shift if @_%2; # so we can call it as a function or method
+ my %args = (@_);
+ require RT::Tickets;
+ require RT::Transactions;
+ require RT::Attachments;
+ require RT::Users;
+ require RT::Principals;
+ require RT::CurrentUser;
+ require RT::Templates;
+ require RT::Queues;
+ require RT::ScripActions;
+ require RT::ScripConditions;
+ require RT::Scrips;
+ require RT::Groups;
+ require RT::GroupMembers;
+ require RT::CustomFields;
+ require RT::CustomFieldValues;
+ require RT::ObjectCustomFields;
+ require RT::ObjectCustomFieldValues;
+ require RT::Attributes;
+ require RT::Dashboard;
+ require RT::Approval;
+
+ # on a cold server (just after restart) people could have an object
+ # in the session, as we deserialize it so we never call constructor
+ # of the class, so the list of accessible fields is empty and we die
+ # with "Method xxx is not implemented in RT::SomeClass"
+ $_->_BuildTableAttributes foreach qw(
+ RT::Ticket
+ RT::Transaction
+ RT::Attachment
+ RT::User
+ RT::Principal
+ RT::Template
+ RT::Queue
+ RT::ScripAction
+ RT::ScripCondition
+ RT::Scrip
+ RT::Group
+ RT::GroupMember
+ RT::CustomField
+ RT::CustomFieldValue
+ RT::ObjectCustomField
+ RT::ObjectCustomFieldValue
+ RT::Attribute
+ );
+
+ if ( $args{'Heavy'} ) {
+ # load scrips' modules
+ my $scrips = RT::Scrips->new($RT::SystemUser);
+ $scrips->Limit( FIELD => 'Stage', OPERATOR => '!=', VALUE => 'Disabled' );
+ while ( my $scrip = $scrips->Next ) {
+ $scrip->LoadModules;
+ }
+
+ foreach my $class ( grep $_, RT->Config->Get('CustomFieldValuesSources') ) {
+ local $@;
+ eval "require $class; 1" or $RT::Logger->error(
+ "Class '$class' is listed in CustomFieldValuesSources option"
+ ." in the config, but we failed to load it:\n$@\n"
+ );
+ }
+
+ RT::I18N->LoadLexicons;
+ }
}
-# }}}
+=head2 InitSystemObjects
+
+Initializes system objects: C<$RT::System>, C<$RT::SystemUser>
+and C<$RT::Nobody>.
+
+=cut
+sub InitSystemObjects {
-sub SystemUser {
- return($SystemUser);
-}
+ #RT's system user is a genuine database user. its id lives here
+ require RT::CurrentUser;
+ $SystemUser = new RT::CurrentUser;
+ $SystemUser->LoadByName('RT_System');
-sub Nobody {
- return ($Nobody);
+ #RT's "nobody user" is a genuine database user. its ID lives here.
+ $Nobody = new RT::CurrentUser;
+ $Nobody->LoadByName('Nobody');
+
+ require RT::System;
+ $System = RT::System->new( $SystemUser );
+}
+
+=head1 CLASS METHODS
+
+=head2 Config
+
+Returns the current L<config object RT::Config>, but note that
+you must L<load config /LoadConfig> first otherwise this method
+returns undef.
+
+Method can be called as class method.
+
+=cut
+
+sub Config { return $Config }
+
+=head2 DatabaseHandle
+
+Returns the current L<database handle object RT::Handle>.
+
+See also L</ConnectToDatabase>.
+
+=cut
+
+sub DatabaseHandle { return $Handle }
+
+=head2 Logger
+
+Returns the logger. See also L</InitLogging>.
+
+=cut
+
+sub Logger { return $Logger }
+
+=head2 System
+
+Returns the current L<system object RT::System>. See also
+L</InitSystemObjects>.
+
+=cut
+
+sub System { return $System }
+
+=head2 SystemUser
+
+Returns the system user's object, it's object of
+L<RT::CurrentUser> class that represents the system. See also
+L</InitSystemObjects>.
+
+=cut
+
+sub SystemUser { return $SystemUser }
+
+=head2 Nobody
+
+Returns object of Nobody. It's object of L<RT::CurrentUser> class
+that represents a user who can own ticket and nothing else. See
+also L</InitSystemObjects>.
+
+=cut
+
+sub Nobody { return $Nobody }
+
+=head2 Plugins
+
+Returns a listref of all Plugins currently configured for this RT instance.
+You can define plugins by adding them to the @Plugins list in your RT_SiteConfig
+
+=cut
+
+our @PLUGINS = ();
+sub Plugins {
+ my $self = shift;
+ unless (@PLUGINS) {
+ $self->InitPluginPaths;
+ @PLUGINS = $self->InitPlugins;
+ }
+ return \@PLUGINS;
}
+=head2 PluginDirs
-=head2 DropSetGIDPermissions
+Takes optional subdir (e.g. po, lib, etc.) and return plugins' dirs that exist.
-Drops setgid permissions.
+This code chacke plugins names or anything else and required when main config
+is loaded to load plugins' configs.
=cut
-sub DropSetGIDPermissions {
- # Now that we got the config read in, we have the database
- # password and don't need to be setgid
- # make the effective group the real group
- $) = $(;
+sub PluginDirs {
+ my $self = shift;
+ my $subdir = shift;
+
+ require RT::Plugin;
+
+ my @res;
+ foreach my $plugin (grep $_, RT->Config->Get('Plugins')) {
+ my $path = RT::Plugin->new( name => $plugin )->Path( $subdir );
+ next unless -d $path;
+ push @res, $path;
+ }
+ return @res;
}
+=head2 InitPluginPaths
-=head1 SYNOPSIS
+Push plugins' lib paths into @INC right after F<local/lib>.
+In case F<local/lib> isn't in @INC, append them to @INC
-=head1 BUGS
+=cut
-Please report them to rt-3.0-bugs@fsck.com, if you know what's broken and have at least some idea of what needs to be fixed.
-If you're not sure what's going on, report them rt-devel@lists.fsck.com.
+sub InitPluginPaths {
+ my $self = shift || __PACKAGE__;
-=head1 SEE ALSO
+ my @lib_dirs = $self->PluginDirs('lib');
-L<RT::StyleGuide>
-L<DBIx::SearchBuilder>
+ my @tmp_inc;
+ my $added;
+ for (@INC) {
+ if ( Cwd::realpath($_) eq $RT::LocalLibPath) {
+ push @tmp_inc, $_, @lib_dirs;
+ $added = 1;
+ } else {
+ push @tmp_inc, $_;
+ }
+ }
+ # append @lib_dirs in case $RT::LocalLibPath isn't in @INC
+ push @tmp_inc, @lib_dirs unless $added;
+ my %seen;
+ @INC = grep !$seen{$_}++, @tmp_inc;
+}
-=begin testing
+=head2 InitPlugins
+Initialze all Plugins found in the RT configuration file, setting up their lib and HTML::Mason component roots.
+
+=cut
+
+sub InitPlugins {
+ my $self = shift;
+ my @plugins;
+ require RT::Plugin;
+ foreach my $plugin (grep $_, RT->Config->Get('Plugins')) {
+ $plugin->require;
+ die $UNIVERSAL::require::ERROR if ($UNIVERSAL::require::ERROR);
+ push @plugins, RT::Plugin->new(name =>$plugin);
+ }
+ return @plugins;
+}
+
+
+sub InstallMode {
+ my $self = shift;
+ if (@_) {
+ $_INSTALL_MODE = shift;
+ if($_INSTALL_MODE) {
+ require RT::CurrentUser;
+ $SystemUser = RT::CurrentUser->new();
+ }
+ }
+ return $_INSTALL_MODE;
+}
-ok ($RT::Nobody->Name() eq 'Nobody', "Nobody is nobody");
-ok ($RT::Nobody->Name() ne 'root', "Nobody isn't named root");
-ok ($RT::SystemUser->Name() eq 'RT_System', "The system user is RT_System");
-ok ($RT::SystemUser->Name() ne 'noname', "The system user isn't noname");
+=head1 BUGS
+
+Please report them to rt-bugs@bestpractical.com, if you know what's
+broken and have at least some idea of what needs to be fixed.
+
+If you're not sure what's going on, report them rt-devel@lists.bestpractical.com.
+
+=head1 SEE ALSO
+
+L<RT::StyleGuide>
+L<DBIx::SearchBuilder>
-=end testing
=cut
+eval "require RT_Vendor";
+die $@ if ($@ && $@ !~ qr{^Can't locate RT_Vendor.pm});
eval "require RT_Local";
die $@ if ($@ && $@ !~ qr{^Can't locate RT_Local.pm});