-# BEGIN LICENSE BLOCK
+# BEGIN BPS TAGGED BLOCK {{{
#
-# Copyright (c) 1996-2002 Jesse Vincent <jesse@bestpractical.com>
+# COPYRIGHT:
+#
+# This software is Copyright (c) 1996-2007 Best Practical Solutions, LLC
+# <jesse@bestpractical.com>
#
-# (Except where explictly superceded by other copyright notices)
+# (Except where explicitly superseded by other copyright notices)
+#
+#
+# LICENSE:
#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
-# from www.gnu.org
+# from www.gnu.org.
#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 or visit their web page on the internet at
+# http://www.gnu.org/copyleft/gpl.html.
#
-# Unless otherwise specified, all modifications, corrections or
-# extensions to this work which alter its source code become the
-# property of Best Practical Solutions, LLC when submitted for
-# inclusion in the work.
#
+# CONTRIBUTION SUBMISSION POLICY:
#
-# END LICENSE BLOCK
-
-
+# (The following paragraph is not intended to limit the rights granted
+# to you to modify and distribute this software under the terms of
+# the GNU General Public License and is only of importance to you if
+# you choose to contribute your changes and enhancements to the
+# community by submitting them to Best Practical Solutions, LLC.)
+#
+# By intentionally submitting any modifications, corrections or
+# derivatives to this work, or any other work intended for use with
+# Request Tracker, to Best Practical Solutions, LLC, you confirm that
+# you are the copyright holder for those contributions and you grant
+# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
+# royalty-free, perpetual, license to use, copy, create derivative
+# works based on those contributions, and sublicense and distribute
+# those contributions and any derivatives thereof.
+#
+# END BPS TAGGED BLOCK }}}
#
# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
# Have a look at "configure" and "Makefile.in" instead
WEB_USER = @WEB_USER@
WEB_GROUP = @WEB_GROUP@
+
+APACHECTL = @APACHECTL@
+
# {{{ Files and directories
# DESTDIR allows you to specify that RT be installed somewhere other than
RT_DOC_PATH = @RT_DOC_PATH@
RT_LOCAL_PATH = @RT_LOCAL_PATH@
LOCAL_ETC_PATH = @LOCAL_ETC_PATH@
+LOCAL_LIB_PATH = @LOCAL_LIB_PATH@
LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH@
MASON_HTML_PATH = @MASON_HTML_PATH@
MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH@
# RT_MODPERL_HANDLER is the mason handler script for mod_perl
RT_MODPERL_HANDLER = $(RT_BIN_PATH)/webmux.pl
+# RT_STANDALONE_SERVER is a stand-alone HTTP server
+RT_STANDALONE_SERVER = $(RT_BIN_PATH)/standalone_httpd
+# RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
+RT_SPEEDYCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.scgi
# RT_FASTCGI_HANDLER is the mason handler script for FastCGI
RT_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.fcgi
# RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
RT_WIN32_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.svc
-# RT's admin CLI
-RT_CLI_ADMIN_BIN = $(RT_BIN_PATH)/rtadmin
+# RT's CLI
+RT_CLI_BIN = $(RT_BIN_PATH)/rt
# RT's mail gateway
RT_MAILGATE_BIN = $(RT_BIN_PATH)/rt-mailgate
# RT's cron tool
# }}}
-SETGID_BINARIES = $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_WIN32_FASTCGI_HANDLER)
BINARIES = $(DESTDIR)/$(RT_MODPERL_HANDLER) \
$(DESTDIR)/$(RT_MAILGATE_BIN) \
+ $(DESTDIR)/$(RT_CLI_BIN) \
$(DESTDIR)/$(RT_CRON_BIN) \
- $(SETGID_BINARIES)
+ $(DESTDIR)/$(RT_STANDALONE_SERVER) \
+ $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \
+ $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
+ $(DESTDIR)/$(RT_WIN32_FASTCGI_HANDLER)
SYSTEM_BINARIES = $(DESTDIR)/$(RT_SBIN_PATH)/
-
# }}}
# {{{ Database setup
# DB_TYPE defines what sort of database RT trys to talk to
# "mysql" is known to work.
# "Pg" is known to work
+# "Informix" is known to work
DB_TYPE = @DB_TYPE@
# For mysql, you probably want 'root'
# For Pg, you probably want 'postgres'
-# For oracle, you want 'system'
+# For Oracle, you want 'system'
+# For Informix, you want 'informix'
DB_DBA = @DB_DBA@
@echo ""
@echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
@echo ""
- @echo "(You will definitely need to set RT's database password before continuing."
- @echo " Not doing so could be very dangerous)"
+ @echo "(You will definitely need to set RT's database password in "
+ @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
+ @echo "very dangerous. Note that you do not have to manually add a "
+ @echo "database user or set up a database for RT. These actions will be "
+ @echo "taken care of in the next step.)"
@echo ""
@echo "After that, you need to initialize RT's database by running"
@echo " 'make initialize-database'"
@echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
@echo "you should update RT's system database objects by running "
@echo " ls etc/upgrade"
- @echo "For each file in that directory whose name is greater than"
+ @echo ""
+ @echo "For each item in that directory whose name is greater than"
@echo "your previously installed RT version, run:"
- @echo " $(RT_SBIN_PATH)/rt-setup-database --action insert --datafile etc/upgrade/<version>"
+ @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action schema --datadir etc/upgrade/<version>"
+ @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action acl --datadir etc/upgrade/<version>"
+ @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action insert --datadir etc/upgrade/<version>"
-upgrade: dirs upgrade-noclobber upgrade-instruct
+upgrade: config-install dirs files-install fixperms upgrade-instruct
upgrade-noclobber: config-install libs-install html-install bin-install local-install doc-install fixperms
# {{{ dependencies
testdeps:
- $(PERL) ./sbin/rt-test-dependencies --with-$(DB_TYPE)
+ $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE)
+
+depends: fixdeps
fixdeps:
- $(PERL) ./sbin/rt-test-dependencies --install --with-$(DB_TYPE)
+ $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE)
#}}}
chmod 0500 $(DESTDIR)/$(RT_ETC_PATH)/*
#TODO: the config file should probably be able to have its
- # owner set seperately from the binaries.
+ # owner set separately from the binaries.
chown -R $(BIN_OWNER) $(DESTDIR)/$(RT_ETC_PATH)
chgrp -R $(RTGROUP) $(DESTDIR)/$(RT_ETC_PATH)
chmod 0550 $(DESTDIR)/$(CONFIG_FILE)
chmod 0550 $(DESTDIR)/$(SITE_CONFIG_FILE)
- # Make the interfaces executable and setgid rt
+ # Make the interfaces executable
chown $(BIN_OWNER) $(BINARIES)
chgrp $(RTGROUP) $(BINARIES)
chmod 0755 $(BINARIES)
- chmod g+s $(SETGID_BINARIES)
# Make the web ui readable by all.
chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(MASON_HTML_PATH) \
$(DESTDIR)/$(MASON_SESSION_PATH)
# }}}
-fixperms-nosetgid: fixperms
- @echo "You should never be running RT this way. it's unsafe"
- chmod 0555 $(SETGID_BINARIES)
- chmod 0555 $(DESTDIR)/$(CONFIG_FILE)
- chmod 0555 $(DESTDIR)/$(SITE_CONFIG_FILE)
-
# {{{ dirs
dirs:
mkdir -p $(DESTDIR)/$(RT_LOG_PATH)
mkdir -p $(DESTDIR)/$(MASON_HTML_PATH)
mkdir -p $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
mkdir -p $(DESTDIR)/$(LOCAL_ETC_PATH)
+ mkdir -p $(DESTDIR)/$(LOCAL_LIB_PATH)
mkdir -p $(DESTDIR)/$(LOCAL_LEXICON_PATH)
# }}}
config-install:
mkdir -p $(DESTDIR)/$(CONFIG_FILE_PATH)
- cp etc/RT_Config.pm $(DESTDIR)/$(CONFIG_FILE)
+ -cp etc/RT_Config.pm $(DESTDIR)/$(CONFIG_FILE)
[ -f $(DESTDIR)/$(SITE_CONFIG_FILE) ] || cp etc/RT_SiteConfig.pm $(DESTDIR)/$(SITE_CONFIG_FILE)
chgrp $(RTGROUP) $(DESTDIR)/$(CONFIG_FILE)
test:
$(PERL) -Ilib lib/t/00smoke.t
-regression-nosetgid-quiet: config-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms-nosetgid apachectl
- $(PERL) sbin/regression_harness
+regression-install: config-install
+ $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)/$(CONFIG_FILE)
-regression-nosetgid: config-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms-nosetgid apachectl
- $(PERL) lib/t/02regression.t
+regression: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms apachectl run-regression
-regression: config-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods apachectl
- $(PERL) lib/t/02regression.t
+run-regression:
+ prove -Ilib lib/t/setup_regression.t lib/t/autogen/ lib/t/regression/
+
+
+regression-noapache: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms start-httpd run-regression
regression-quiet:
$(PERL) sbin/regression_harness
# {{{ database-installation
regression-reset-db:
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --dba-password ''
+ $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force
$(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
+initdb :: initialize-database
+
initialize-database:
$(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
# {{{ libs-install
libs-install:
- [ -d $(DESTDIR)/$(RT_LIB_PATH) ] || mkdir $(DESTDIR)/$(RT_LIB_PATH)
+ [ -d $(DESTDIR)/$(RT_LIB_PATH) ] || mkdir -p $(DESTDIR)/$(RT_LIB_PATH)
-cp -rp lib/* $(DESTDIR)/$(RT_LIB_PATH)
# }}}
# {{{ html-install
html-install:
- [ -d $(DESTDIR)/$(MASON_HTML_PATH) ] || mkdir $(DESTDIR)/$(MASON_HTML_PATH)
+ [ -d $(DESTDIR)/$(MASON_HTML_PATH) ] || mkdir -p $(DESTDIR)/$(MASON_HTML_PATH)
-cp -rp ./html/* $(DESTDIR)/$(MASON_HTML_PATH)
# }}}
doc-install:
# RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
-[ -f $(DESTDIR)/$(RT_DOC_PATH) ] && rm $(DESTDIR)/$(RT_DOC_PATH)
- [ -d $(DESTDIR)/$(RT_DOC_PATH) ] || mkdir $(DESTDIR)/$(RT_DOC_PATH)
+ [ -d $(DESTDIR)/$(RT_DOC_PATH) ] || mkdir -p $(DESTDIR)/$(RT_DOC_PATH)
-cp -rp ./README $(DESTDIR)/$(RT_DOC_PATH)
# }}}
sbin-install:
mkdir -p $(DESTDIR)/$(RT_SBIN_PATH)
- chmod +x sbin/rt-setup-database \
+ chmod +x \
+ sbin/rt-dump-database \
+ sbin/rt-setup-database \
sbin/rt-test-dependencies
-cp -rp \
+ sbin/rt-dump-database \
sbin/rt-setup-database \
sbin/rt-test-dependencies \
$(DESTDIR)/$(RT_SBIN_PATH)
-cp -rp \
bin/rt-mailgate \
bin/mason_handler.fcgi \
+ bin/mason_handler.scgi \
+ bin/standalone_httpd \
bin/mason_handler.svc \
+ bin/rt \
bin/webmux.pl \
bin/rt-crontool \
$(DESTDIR)/$(RT_BIN_PATH)
testify-pods:
[ -d lib/t/autogen ] || mkdir lib/t/autogen
- find lib -name \*pm |grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE)
- find bin -type f |grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE)
+ find lib -name \*pm |grep -v .svn | grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE)
+ find bin -type f |grep -v .svn | grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE)
+ find lib -name \*pm |grep -v .svn | grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE)
+ find bin -type f |grep -v .svn | grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE)
factory: initialize-database
cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
-commit:
- aegis -build ; aegis -diff ; aegis -test; aegis -develop_end
-
-integrate:
- aegis -integrate_begin; aegis -build; aegis -diff; aegis -test ; aegis -integrate_pass
-
-predist: commit tag-and-tar
-
-tag-and-release-baseline:
- aegis -cp -ind Makefile -output /tmp/Makefile.tagandrelease; \
- $(MAKE) -f /tmp/Makefile.tagandrelease tag-and-release-never-by-hand
-
-
-# Running this target in a working directory is
-# WRONG WRONG WRONG.
-# it will tag the current baseline with the version of RT defined
-# in the currently-being-worked-on makefile. which is wrong.
-# you want tag-and-release-baseline
-
-tag-and-release-never-by-hand:
- aegis --delta-name $(TAG)
- rm -rf /tmp/$(TAG)
- mkdir /tmp/$(TAG)
- cd /tmp/$(TAG); \
- aegis -cp -ind -delta $(TAG) . ;\
- make reconfigure;\
- chmod 600 Makefile;\
- aegis --report --project rt.$(RT_VERSION_MAJOR) \
- --page_width 80 \
- --page_length 9999 \
- --change $(RT_VERSION_MINOR) --output Changelog Change_Log
-
- cd /tmp; tar czvf /home/ftp/pub/rt/devel/$(TAG).tar.gz $(TAG)/
- chmod 644 /home/ftp/pub/rt/devel/$(TAG).tar.gz
-
-
reconfigure:
aclocal -I m4
autoconf
chmod 755 ./configure
./configure
-rpm:
- (cd ..; tar czvf /usr/src/redhat/SOURCES/rt.tar.gz rt)
- rpm -ba etc/rt.spec
-
+start-httpd:
+ $(PERL) bin/standalone_httpd &
apachectl:
- apachectl stop
- sleep 3
- apachectl start
+ $(APACHECTL) stop
+ sleep 10
+ $(APACHECTL) start
+ sleep 5
# }}}