);
use strict;
-use Carp qw(cluck);
+use Carp qw(cluck croak);
use Scalar::Util qw( blessed );
use List::Util qw(min max sum);
use Tie::IxHash;
$same_pkgpart = 0;
}
- if ($opt->{'waive_setup'}) { $self->set('waive_setup', $opt->{'waive_setup'}) }
- else { $self->set('waive_setup', ''); }
+ # Discounts:
+ # When a new discount level is specified in $opt:
+ # If new discountnum matches old discountnum, months_used/end_date are
+ # carried over as the discount is applied to the new cust_pkg
+ #
+ # Legacy behavior:
+ # Unless discount-related fields have been set within $opt, change()
+ # sets no discounts on the changed packages unless the new pkgpart is the
+ # same as the old pkgpart. In that case, discounts from the old cust_pkg
+ # are copied onto the new cust_pkg
+
+ # Read discount fields from $opt
+ my %new_discount = $self->_parse_new_discounts($opt);
+ $self->set(waive_setup => $opt->{waive_setup} ? $opt->{waive_setup} : '');
# Before going any further here: if the package is still in the pre-setup
# state, it's safe to modify it in place. No need to charge/credit for
} # done transferring services
+ # Set waive_setup as directed
+ if ( !$error && exists $opt->{waive_setup} ) {
+ $self->set(waive_setup => $opt->{waive_setup});
+ $error = $self->replace;
+ }
+
+ # Set discounts if explicitly specified in $opt
+ if ( !$error && %new_discount ) {
+ $error = $self->change_discount(%new_discount);
+ }
+
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+
$dbh->commit if $oldAutoCommit;
return $self;
$keep_dates = 0;
$hash{'last_bill'} = '';
$hash{'bill'} = '';
+
+ # Optionally, carry over the next bill date from the changed cust_pkg
+ # so an invoice isn't generated until the customer's usual billing date
+ if ( $self->part_pkg->option('prorate_defer_change_bill', 1) ) {
+ $hash{bill} = $self->bill;
+ }
}
if ( $keep_dates ) {
}
}
- # transfer discounts, if we're not changing pkgpart
- if ( $same_pkgpart ) {
+ if (%new_discount && !$error) {
+
+ # If discounts were explicitly specified in $opt
+ $error = $cust_pkg->change_discount(%new_discount);
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "applying discounts: $error";
+ }
+
+ } elsif ( $same_pkgpart ) {
+
+ # transfer discounts, if we're not changing pkgpart
foreach my $old_discount ($self->cust_pkg_discount_active) {
# don't remove the old discount, we may still need to bill that package.
my $new_discount = new FS::cust_pkg_discount {
$opt->{'locationnum'} = $opt->{'cust_location'}->locationnum;
}
+ # Discounts:
+ # Applies discounts to the newly created future_change package
+ #
+ # If a new discount is the same as the old discount, carry over the
+ # old discount's months_used/end_date fields too
+ #
+ # Legacy behavior:
+ # Legacy behavior was to create the next package with no discount.
+ # This behavior is preserved. Without the discount fields in $opt,
+ # the new package will be created with no discounts.
+
+ # parse discount information from $opt
+ my %new_discount = $self->_parse_new_discounts($opt);
+
if ( $self->change_to_pkgnum ) {
my $change_to = FS::cust_pkg->by_key($self->change_to_pkgnum);
my $new_pkgpart = $opt->{'pkgpart'}
$change_to->set('start_date', $date);
$error = $self->replace || $change_to->replace;
}
+
+ if ( !$error && exists $opt->{waive_setup} ) {
+ $change_to->set(waive_setup => $opt->{waive_setup} );
+ $error = $change_to->insert();
+ }
+
+ if ( !$error && %new_discount ) {
+ $error = $change_to->change_discount(%new_discount);
+ }
+
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
return $error;
} );
$error = $new->insert('change' => 1,
'allow_pkgpart' => ($new_pkgpart ? 0 : 1));
+
+ if ( !$error && %new_discount ) {
+ $error = $new->change_discount(%new_discount);
+ }
+
if ( !$error ) {
$self->set('change_to_pkgnum', $new->pkgnum);
$self->set('expire', $date);
$error = $self->replace;
}
+
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
} else {
$error;
}
+# Helper method reads $opt hashref from change() and change_later()
+# Returns a hash of %new_discount suitable for passing to change_discount()
+sub _parse_new_discounts {
+ my ($self, $opt) = @_;
+
+ croak "Bad parameter list" unless ref $opt;
+
+ my %old_discount =
+ map { $_->setuprecur => $_ }
+ qsearch('cust_pkg_discount', {
+ pkgnum => $self->pkgnum,
+ disabled => '',
+ });
+
+ my %new_discount;
+ for my $type(qw|setup recur|) {
+
+ if (exists $opt->{"${type}_discountnum"}) {
+ $new_discount{$type} = {
+ discountnum => $opt->{"${type}_discountnum"},
+ amount => $opt->{"${type}_discountnum_amount"},
+ percent => $opt->{"${type}_discountnum_percent"},
+ months => $opt->{"${type}_discountnum_months"},
+ };
+ }
+
+ # Specified discountnum same as old discountnum, carry over addl fields
+ if (
+ exists $opt->{"${type}_discountnum"}
+ && exists $old_discount{$type}
+ && $opt->{"${type}_discountnum"} eq $old_discount{$type}->discountnum
+ ){
+ $new_discount{$type}->{months} = $old_discount{$type}->months;
+ $new_discount{$type}->{end_date} = $old_discount{$type}->end_date;
+ }
+
+ # No new discount specified, carryover old discount
+ # If we wanted to abandon legacy behavior, and always carry old discounts
+ # uncomment this:
+
+ # if (!exists $new_discount{$type} && $old_discount{$type}) {
+ # $new_discount{$type} = {
+ # discountnum => $old_discount{$type}->discountnum,
+ # amount => $old_discount{$type}->amount,
+ # percent => $old_discount{$type}->percent,
+ # months => $old_discount{$type}->months,
+ # end_date => $old_discount{$type}->end_date,
+ # };
+ # }
+ }
+
+ if ($DEBUG) {
+ warn "_parse_new_discounts(), pkgnum: ".$self->pkgnum." \n";
+ warn "Determine \%old_discount, \%new_discount: \n";
+ warn Dumper(\%old_discount);
+ warn Dumper(\%new_discount);
+ }
+
+ %new_discount;
+}
+
=item abort_change
Cancels a future package change scheduled by C<change_later>.
my $param = shift;
warn Dumper($param) if $DEBUG;
- my $old_part_pkg = qsearchs('part_pkg',
- { pkgpart => $param->{'old_pkgpart'} });
my $new_part_pkg = qsearchs('part_pkg',
{ pkgpart => $param->{'new_pkgpart'} });
- die "Must select a new package type\n" unless $new_part_pkg;
+ die "Must select a new package definition\n" unless $new_part_pkg;
+
#my $keep_dates = $param->{'keep_dates'} || 0;
my $keep_dates = 1; # there is no good reason to turn this off
local $FS::UID::AutoCommit = 0;
my $dbh = dbh;
- my @cust_pkgs = qsearch('cust_pkg', { 'pkgpart' => $param->{'old_pkgpart'} } );
+ my @old_pkgpart = ref($param->{'old_pkgpart'}) ? @{ $param->{'old_pkgpart'} }
+ : $param->{'old_pkgpart'};
+
+ my @cust_pkgs = qsearch({
+ 'table' => 'cust_pkg',
+ 'extra_sql' => ' WHERE pkgpart IN ('.
+ join(',', @old_pkgpart). ')',
+ });
my $i = 0;
foreach my $old_cust_pkg ( @cust_pkgs ) {
'';
}
+=item change_discount %opt
+
+Method checks if the given values represent a change in either setup or
+discount level. If so, the existing discounts are revoked, the new
+discounts are recorded.
+
+Usage:
+
+$error = change_discount(
+ setup => {
+
+ # -1: Indicates a "custom discount"
+ # 0: Indicates to remove any discount
+ # >0: discountnum to apply
+ discountnum => [-1, 0, discountnum],
+
+ # When discountnum is "-1" to indicate custom discount, include
+ # the additional fields:
+ amount => AMOUNT_DISCOUNT
+ percent => PERCENTAGE_DISCOUNT
+ months => -1,
+ },
+
+ recur => {...}
+);
+
+
+=cut
+
+sub change_discount {
+ my ($self, %opt) = @_;
+ return "change_discount() called with bad \%opt"
+ unless %opt;
+
+ for (keys %opt) {
+ return "change_discount() called with unknown bad key $_"
+ unless $_ eq 'setup' || $_ eq 'recur';
+ }
+
+ my @old_discount =
+ qsearch('cust_pkg_discount',{
+ pkgnum => $self->pkgnum,
+ disabled => '',
+ });
+
+ if ($DEBUG) {
+ warn "change_discount() pkgnum: ".$self->pkgnum." \n";
+ warn "change_discount() \%opt: \n";
+ warn Dumper(\%opt);
+ }
+
+ my @to_be_disabled;
+
+ for my $type (qw|setup recur|) {
+ next unless ref $opt{$type};
+ my %change = %{$opt{$type}};
+
+ return "change_discount() called with bad \$opt($type)"
+ unless $change{discountnum} =~ /^-?\d+$/;
+
+ if ($change{discountnum} eq 0) {
+ # Removing old discount
+
+ delete $opt{$type};
+ push @to_be_disabled, grep {$_->setuprecur eq $type} @old_discount;
+ } else {
+
+ if (
+ grep {
+ $_->discountnum eq $change{discountnum}
+ && $_->setuprecur eq $type
+ } @old_discount
+ ){
+ # Duplicate, disregard this entry
+ delete $opt{$type};
+ next;
+ } else {
+ # Mark any discounts we're replacing
+ push @to_be_disabled, grep{ $_->setuprecur eq $type} @old_discount;
+ }
+
+ }
+ }
+
+
+ # If we still have changes queued, pass them to insert_discount()
+ # by setting values into object fields
+ for my $type (keys %opt) {
+ $self->set("${type}_discountnum", $opt{$type}->{discountnum});
+
+ if ($opt{$type}->{discountnum} eq '-1') {
+ $self->set("${type}_discountnum_${_}", $opt{$type}->{$_})
+ for qw(amount percent months);
+ }
+
+ }
+
+ if ($DEBUG) {
+ warn "change_discount() \% opt before insert \n";
+ warn Dumper \%opt;
+ warn "\@to_be_disabled \n";
+ warn Dumper \@to_be_disabled;
+ }
+
+ # Roll these updates into a transaction
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::AutoCommit = 0;
+ my $dbh = dbh;
+
+ my $error;
+
+ # The "waive setup fee" flag has traditionally been handled by setting
+ # $cust_pkg->waive_setup_fee = Y. This has been appropriately, and separately
+ # handled, and it operates on a differetnt table than cust_pkg_discount,
+ # so the "-2 for waive setup fee" option is not being reimplemented
+ # here. Perhaps this may change later.
+ #
+ # When a setup discount is entered, we still need unset waive_setup
+ if ( $opt{setup} && $opt{setup} > -2 && $self->waive_setup ) {
+ $self->set(waive_setup => '');
+ $error = $self->replace();
+ }
+
+ # Create new discounts
+ $error ||= $self->insert_discount();
+
+ # Disabling old discounts
+ for my $tbd (@to_be_disabled) {
+ unless ($error) {
+ $tbd->set(disabled => 'Y');
+ $error = $tbd->replace();
+ }
+ }
+
+ if ($error) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+
+ $dbh->commit if $oldAutoCommit;
+ return undef;
+}
+
=item set_usage USAGE_VALUE_HASHREF
USAGE_VALUE_HASHREF is a hashref of svc_acct usage columns and the amounts
}
+=item fcc_477_record
+
+Returns a fcc_477 record based on option name.
+
+=cut
+
+sub fcc_477_record {
+ my ($self, $option_name) = @_;
+
+ my $fcc_record = qsearchs({
+ 'table' => 'part_pkg_fcc_option',
+ 'hashref' => { 'pkgpart' => $self->{Hash}->{pkgpart}, 'fccoptionname' => $option_name, },
+ });
+
+ return ( $fcc_record );
+
+}
+
=item tax_locationnum_sql
Returns an SQL expression for the tax location for a package, based
=item order CUSTNUM, PKGPARTS_ARYREF, [ REMOVE_PKGNUMS_ARYREF [ RETURN_CUST_PKG_ARRAYREF [ REFNUM ] ] ]
+=item order \%PARAMS
+
Bulk cancel + order subroutine. Perhaps slightly deprecated, only used by the
bulk cancel+order in the web UI and nowhere else (edit/process/cust_pkg.cgi)
refnums as keys. If no I<refnum> is defined, a default FS::pkg_referral
record will be created corresponding to cust_main.refnum.
+LOCATIONNUM, if specified, will be set on newly created cust_pkg records
+
=cut
sub order {
- my ($custnum, $pkgparts, $remove_pkgnum, $return_cust_pkg, $refnum) = @_;
+ my ($custnum, $pkgparts, $remove_pkgnum, $return_cust_pkg, $refnum,
+ $locationnum);
+
+ if ( ref $_[0] ) {
+ my $args = $_[0];
+ $custnum = $args->{custnum};
+ $pkgparts = $args->{pkgparts};
+ $remove_pkgnum = $args->{remove_pkgnum};
+ $return_cust_pkg = $args->{return_cust_pkg};
+ $refnum = $args->{refnum};
+ $locationnum = $args->{locationnum};
+ } else {
+ ($custnum, $pkgparts, $remove_pkgnum, $return_cust_pkg, $refnum) = @_;
+ }
my $conf = new FS::Conf;
}
+ $hash{locationnum} = $locationnum if $locationnum;
+
# Create the new packages.
foreach my $pkgpart (@$pkgparts) {
=cut
1;
-