use Time::Local qw( timelocal timelocal_nocheck );
use MIME::Entity;
use FS::UID qw( dbh driver_name );
-use FS::Misc qw( send_email );
use FS::Record qw( qsearch qsearchs fields );
use FS::CurrentUser;
use FS::cust_svc;
# for modify_charge
use FS::cust_credit;
+# temporary fix; remove this once (un)suspend admin notices are cleaned up
+use FS::Misc qw(send_email);
+
# need to 'use' these instead of 'require' in sub { cancel, suspend, unsuspend,
# setup }
# because they load configuration by setting FS::UID::callback (see TODO)
our $upgrade = 0; #go away after setup+start dates cleaned up for old customers
+our $cache_enabled = 0;
+
+sub _simplecache {
+ my( $self, $hashref ) = @_;
+ if ( $cache_enabled && $hashref->{'pkg'} && $hashref->{'plan'} ) {
+ $self->{'_pkgpart'} = FS::part_pkg->new($hashref);
+ }
+}
+
sub _cache {
my $self = shift;
my ( $hashref, $cache ) = @_;
- #if ( $hashref->{'pkgpart'} ) {
- if ( $hashref->{'pkg'} ) {
- # #@{ $self->{'_pkgnum'} } = ();
- # my $subcache = $cache->subcache('pkgpart', 'part_pkg');
- # $self->{'_pkgpart'} = $subcache;
- # #push @{ $self->{'_pkgnum'} },
- # FS::part_pkg->new_or_cached($hashref, $subcache);
- $self->{'_pkgpart'} = FS::part_pkg->new($hashref);
- }
+# #if ( $hashref->{'pkgpart'} ) {
+# if ( $hashref->{'pkg'} ) {
+# # #@{ $self->{'_pkgnum'} } = ();
+# # my $subcache = $cache->subcache('pkgpart', 'part_pkg');
+# # $self->{'_pkgpart'} = $subcache;
+# # #push @{ $self->{'_pkgnum'} },
+# # FS::part_pkg->new_or_cached($hashref, $subcache);
+# $self->{'_pkgpart'} = FS::part_pkg->new($hashref);
+# }
if ( exists $hashref->{'svcnum'} ) {
#@{ $self->{'_pkgnum'} } = ();
my $subcache = $cache->subcache('svcnum', 'cust_svc', $hashref->{pkgnum});
$seconds = $record->seconds_since($timestamp);
+ #bulk cancel+order... perhaps slightly deprecated, only used by the bulk
+ # cancel+order in the web UI and nowhere else (edit/process/cust_pkg.cgi)
$error = FS::cust_pkg::order( $custnum, \@pkgparts );
$error = FS::cust_pkg::order( $custnum, \@pkgparts, \@remove_pkgnums ] );
order taker (see L<FS::access_user>)
-=item manual_flag
-
-If this field is set to 1, disables the automatic
-unsuspension of this package when using the B<unsuspendauto> config option.
-
=item quantity
If not set, defaults to 1
' (cust_pkg.pkgnum '. $self->pkgnum. ')';
}
+=item set_initial_timers
+
+If required by the package definition, sets any automatic expire, adjourn,
+or contract_end timers to some number of months after the start date
+(or setup date, if the package has already been setup). If the package has
+a delayed setup fee after a period of "free days", will also set the
+start date to the end of that period.
+
+If the package has an automatic transfer rule (C<change_to_pkgnum>), then
+this will also order the package and set its start date.
+
+=cut
+
+sub set_initial_timers {
+ my $self = shift;
+ my $part_pkg = $self->part_pkg;
+ my $start = $self->start_date || $self->setup || time;
+
+ foreach my $action ( qw(expire adjourn contract_end) ) {
+ my $months = $part_pkg->get("${action}_months");
+ if($months and !$self->get($action)) {
+ $self->set($action, $part_pkg->add_freq($start, $months) );
+ }
+ }
+
+ # if this package has an expire date and a change_to_pkgpart, set automatic
+ # package transfer
+ # (but don't call change_later, as that would call $self->replace, and we're
+ # probably in the middle of $self->insert right now)
+ if ( $part_pkg->expire_months and $part_pkg->change_to_pkgpart ) {
+ if ( $self->change_to_pkgnum ) {
+ # this can happen if a package is ordered on hold, scheduled for a
+ # future change _while on hold_, and then released from hold, causing
+ # the automatic transfer to schedule.
+ #
+ # what's correct behavior in that case? I think it's to disallow
+ # future-changing an on-hold package that has an automatic transfer.
+ # but if we DO get into this situation, let the manual package change
+ # win.
+ warn "pkgnum ".$self->pkgnum.": manual future package change blocks ".
+ "automatic transfer.\n";
+ } else {
+ my $change_to = FS::cust_pkg->new( {
+ start_date => $self->get('expire'),
+ pkgpart => $part_pkg->change_to_pkgpart,
+ map { $_ => $self->get($_) }
+ qw( custnum locationnum quantity refnum salesnum contract_end )
+ } );
+ my $error = $change_to->insert;
+
+ return $error if $error;
+ $self->set('change_to_pkgnum', $change_to->pkgnum);
+ }
+ }
+
+ # if this package has "free days" and delayed setup fee, then
+ # set start date that many days in the future.
+ # (this should have been set in the UI, but enforce it here)
+ if ( $part_pkg->option('free_days',1)
+ && $part_pkg->option('delay_setup',1)
+ )
+ {
+ $self->start_date( $part_pkg->default_start_date );
+ }
+
+ '';
+}
+
=item insert [ OPTION => VALUE ... ]
Adds this billing item to the database ("Orders" the item). If there is an
sub insert {
my( $self, %options ) = @_;
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::AutoCommit = 0;
+ my $dbh = dbh;
+
my $error;
$error = $self->check_pkgpart unless $options{'allow_pkgpart'};
- return $error if $error;
my $part_pkg = $self->part_pkg;
if ( ! $import && ! $options{'change'} ) {
+ # set order date to now
+ $self->order_date(time) unless ($import && $self->order_date);
+
# if the package def says to start only on the first of the month:
if ( $part_pkg->option('start_1st', 1) && !$self->start_date ) {
my ($sec,$min,$hour,$mday,$mon,$year) = (localtime(time) )[0,1,2,3,4,5];
$self->start_date( timelocal_nocheck(0,0,0,1,$mon,$year) );
}
- # set up any automatic expire/adjourn/contract_end timers
- # based on the start date
- foreach my $action ( qw(expire adjourn contract_end) ) {
- my $months = $part_pkg->option("${action}_months",1);
- if($months and !$self->$action) {
- my $start = $self->start_date || $self->setup || time;
- $self->$action( $part_pkg->add_freq($start, $months) );
- }
- }
-
- # if this package has "free days" and delayed setup fee, then
- # set start date that many days in the future.
- # (this should have been set in the UI, but enforce it here)
- if ( ! $options{'change'}
- && $part_pkg->option('free_days', 1)
- && $part_pkg->option('delay_setup',1)
- #&& ! $self->start_date
- )
- {
- $self->start_date( $part_pkg->default_start_date );
+ if ($self->susp eq 'now' or $part_pkg->start_on_hold) {
+ # if the package was ordered on hold:
+ # - suspend it
+ # - don't set the start date (it will be started manually)
+ $self->set('susp', $self->order_date);
+ $self->set('start_date', '');
+ } else {
+ # set expire/adjourn/contract_end timers, and free days, if appropriate
+ # and automatic package transfer, which can fail, so capture the result
+ $error = $self->set_initial_timers;
}
- }
-
- # set order date unless it was specified as part of an import
- # or this was previously a different package
- $self->order_date(time) unless ($import && $self->order_date)
- or $self->change_pkgnum;
-
- $self->susp( $self->order_date ) if $self->susp eq 'now';
+ } # else this is a package change, and shouldn't have "new package" behavior
- my $oldAutoCommit = $FS::UID::AutoCommit;
- local $FS::UID::AutoCommit = 0;
- my $dbh = dbh;
-
- $error = $self->SUPER::insert($options{options} ? %{$options{options}} : ());
+ $error ||= $self->SUPER::insert($options{options} ? %{$options{options}} : ());
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
return $error;
}
}
- if ( $self->discountnum ) {
+ if ( $self->setup_discountnum || $self->recur_discountnum ) {
my $error = $self->insert_discount();
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
my $conf = new FS::Conf;
+ if ($self->locationnum) {
+ my @part_export =
+ map qsearch( 'part_export', {exportnum=>$_} ),
+ $conf->config('cust_location-exports'); #, $agentnum
+
+ foreach my $part_export ( @part_export ) {
+ my $error = $part_export->export_pkg_location($self); #, @$export_args);
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "exporting to ". $part_export->exporttype.
+ " (transaction rolled back): $error";
+ }
+ }
+ }
+
if ( ! $import && $conf->config('ticket_system') && $options{ticket_subject} ) {
#this init stuff is still inefficient, but at least its limited to
=cut
+# this is still used internally to abort future package changes, so it
+# does need to work
+
sub delete {
my $self = shift;
+ # The following foreign keys to cust_pkg are not cleaned up here, and will
+ # cause package deletion to fail:
+ #
+ # cust_credit.pkgnum and commission_pkgnum (and cust_credit_void)
+ # cust_credit_bill.pkgnum
+ # cust_pay_pending.pkgnum
+ # cust_pay.pkgnum (and cust_pay_void)
+ # cust_bill_pay.pkgnum (wtf, shouldn't reference pkgnum)
+ # cust_pkg_usage.pkgnum
+ # cust_pkg.uncancel_pkgnum, change_pkgnum, main_pkgnum, and change_to_pkgnum
+
+ # cust_svc is handled by canceling the package before deleting it
+ # cust_pkg_option is handled via option_Common
+
my $oldAutoCommit = $FS::UID::AutoCommit;
local $FS::UID::AutoCommit = 0;
my $dbh = dbh;
}
}
- #pkg_referral?
+ foreach my $pkg_referral ( $self->pkg_referral ) {
+ my $error = $pkg_referral->delete;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+ }
my $error = $self->SUPER::delete(@_);
if ( $error ) {
}
}
+ # also run exports if removing locationnum?
+ # doesn't seem to happen, and we don't export blank locationnum on insert...
+ if ($new->locationnum and ($new->locationnum != $old->locationnum)) {
+ my $conf = new FS::Conf;
+ my @part_export =
+ map qsearch( 'part_export', {exportnum=>$_} ),
+ $conf->config('cust_location-exports'); #, $agentnum
+
+ foreach my $part_export ( @part_export ) {
+ my $error = $part_export->export_pkg_location($new); #, @$export_args);
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "exporting to ". $part_export->exporttype.
+ " (transaction rolled back): $error";
+ }
+ }
+ }
+
$dbh->commit or die $dbh->errstr if $oldAutoCommit;
'';
|| $self->ut_numbern('resume')
|| $self->ut_numbern('expire')
|| $self->ut_numbern('dundate')
- || $self->ut_enum('no_auto', [ '', 'Y' ])
- || $self->ut_enum('waive_setup', [ '', 'Y' ])
+ || $self->ut_flag('no_auto', [ '', 'Y' ])
+ || $self->ut_flag('waive_setup', [ '', 'Y' ])
+ || $self->ut_flag('separate_bill')
|| $self->ut_textn('agent_pkgid')
|| $self->ut_enum('recur_show_zero', [ '', 'Y', 'N', ])
|| $self->ut_enum('setup_show_zero', [ '', 'Y', 'N', ])
$self->usernum($FS::CurrentUser::CurrentUser->usernum) unless $self->usernum;
- if ( $self->dbdef_table->column('manual_flag') ) {
- $self->manual_flag('') if $self->manual_flag eq ' ';
- $self->manual_flag =~ /^([01]?)$/
- or return "Illegal manual_flag ". $self->manual_flag;
- $self->manual_flag($1);
- }
-
$self->SUPER::check;
}
case. If it's not set, the 'unused_credit_cancel' part_pkg option will
be used.
+=item no_delay_cancel - prevents delay_cancel behavior
+no matter what other options say, for use when changing packages (or any
+other time you're really sure you want an immediate cancel)
+
=back
If there is an error, returns the error, otherwise returns false.
=cut
+#NOT DOCUMENTING - this should only be used when calling recursively
+#=item delay_cancel - for internal use, to allow proper handling of
+#supplemental packages when the main package is flagged to suspend
+#before cancelling, probably shouldn't be used otherwise (set the
+#corresponding package option instead)
+
sub cancel {
my( $self, %options ) = @_;
my $error;
- # pass all suspend/cancel actions to the main package
- if ( $self->main_pkgnum and !$options{'from_main'} ) {
- return $self->main_pkg->cancel(%options);
- }
+ # supplemental packages can now be separately canceled, though the UI
+ # shouldn't permit it
+ #
+ ## pass all suspend/cancel actions to the main package
+ ## (unless the pkglinknum has been removed, then the link is defunct and
+ ## this package can be canceled on its own)
+ #if ( $self->main_pkgnum and $self->pkglinknum and !$options{'from_main'} ) {
+ # return $self->main_pkg->cancel(%options);
+ #}
my $conf = new FS::Conf;
my $date = $options{'date'} if $options{'date'}; # expire/cancel later
$date = '' if ($date && $date <= $cancel_time); # complain instead?
+ my $delay_cancel = $options{'no_delay_cancel'} ? 0 : $options{'delay_cancel'};
+ if ( !$date && $self->part_pkg->option('delay_cancel',1)
+ && (($self->status eq 'active') || ($self->status eq 'suspended'))
+ && !$options{'no_delay_cancel'}
+ ) {
+ my $expdays = $conf->config('part_pkg-delay_cancel-days') || 1;
+ my $expsecs = 60*60*24*$expdays;
+ my $suspfor = $self->susp ? $cancel_time - $self->susp : 0;
+ $expsecs = $expsecs - $suspfor if $suspfor;
+ unless ($expsecs <= 0) { #if it's already been suspended long enough, don't re-suspend
+ $delay_cancel = 1;
+ $date = $cancel_time + $expsecs;
+ }
+ }
+
#race condition: usage could be ongoing until unprovisioned
#resolved by performing a change package instead (which unprovisions) and
#later cancelling
}
}
+ # if a reasonnum was passed, get the actual reason object so we can check
+ # unused_credit
+
+ my $reason;
+ if ($options{'reason'} =~ /^\d+$/) {
+ $reason = FS::reason->by_key($options{'reason'});
+ }
+
unless ($date) {
- # credit remaining time if appropriate
+ # credit remaining time if any of these are true:
+ # - unused_credit => 1 was passed (this happens when canceling a package
+ # for a package change when unused_credit_change is set)
+ # - no unused_credit option, and there is a cancel reason, and the cancel
+ # reason says to credit the package
+ # - no unused_credit option, and the package definition says to credit the
+ # package on cancellation
my $do_credit;
if ( exists($options{'unused_credit'}) ) {
$do_credit = $options{'unused_credit'};
- }
- else {
+ } elsif ( defined($reason) && $reason->unused_credit ) {
+ $do_credit = 1;
+ } else {
$do_credit = $self->part_pkg->option('unused_credit_cancel', 1);
}
if ( $do_credit ) {
return $error;
}
}
-
} #unless $date
my %hash = $self->hash;
if ( $date ) {
$hash{'expire'} = $date;
+ if ($delay_cancel) {
+ # just to be sure these are clear
+ $hash{'adjourn'} = undef;
+ $hash{'resume'} = undef;
+ }
} else {
$hash{'cancel'} = $cancel_time;
}
$hash{'change_custnum'} = $options{'change_custnum'};
+ # if this is a supplemental package that's lost its part_pkg_link, and it's
+ # being canceled for real, unlink it completely
+ if ( !$date and ! $self->pkglinknum ) {
+ $hash{main_pkgnum} = '';
+ }
+
+ # if there is a future package change scheduled, unlink from it (like
+ # abort_change) first, then delete it.
+ $hash{'change_to_pkgnum'} = '';
+
+ # save the package state
my $new = new FS::cust_pkg ( \%hash );
$error = $new->replace( $self, options => { $self->options } );
+
if ( $self->change_to_pkgnum ) {
my $change_to = FS::cust_pkg->by_key($self->change_to_pkgnum);
- $error ||= $change_to->cancel || $change_to->delete;
+ $error ||= $change_to->cancel('no_delay_cancel' => 1) || $change_to->delete;
}
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
}
foreach my $supp_pkg ( $self->supplemental_pkgs ) {
- $error = $supp_pkg->cancel(%options, 'from_main' => 1);
+ $error = $supp_pkg->cancel(%options,
+ 'from_main' => 1,
+ 'date' => $date, #in case it got changed by delay_cancel
+ 'delay_cancel' => $delay_cancel,
+ );
if ( $error ) {
$dbh->rollback if $oldAutoCommit;
return "canceling supplemental pkg#".$supp_pkg->pkgnum.": $error";
}
}
- foreach my $usage ( $self->cust_pkg_usage ) {
- $error = $usage->delete;
- if ( $error ) {
- $dbh->rollback if $oldAutoCommit;
- return "deleting usage pools: $error";
+ if ($delay_cancel && !$options{'from_main'}) {
+ $error = $new->suspend(
+ 'from_cancel' => 1,
+ 'time' => $cancel_time
+ );
+ }
+
+ unless ($date) {
+ foreach my $usage ( $self->cust_pkg_usage ) {
+ $error = $usage->delete;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "deleting usage pools: $error";
+ }
}
}
$error = $msg_template->send( 'cust_main' => $self->cust_main,
'object' => $self );
}
- else {
- $error = send_email(
- 'from' => $conf->config('invoice_from', $self->cust_main->agentnum),
- 'to' => \@invoicing_list,
- 'subject' => ( $conf->config('cancelsubject') || 'Cancellation Notice' ),
- 'body' => [ map "$_\n", $conf->config('cancelmessage') ],
- 'custnum' => $self->custnum,
- 'msgtype' => '', #admin?
- );
- }
#should this do something on errors?
}
setup
susp adjourn resume expire start_date contract_end dundate
change_date change_pkgpart change_locationnum
- manual_flag no_auto quantity agent_pkgid recur_show_zero setup_show_zero
+ no_auto separate_bill quantity agent_pkgid
+ recur_show_zero setup_show_zero
),
};
=over 4
-=item reason - can be set to a cancellation reason (see L<FS:reason>),
+=item reason - can be set to a cancellation reason (see L<FS:reason>),
either a reasonnum of an existing reason, or passing a hashref will create
a new reason. The hashref should have the following keys:
- typenum - Reason type (see L<FS::reason_type>
=item from_main - allows a supplemental package to be suspended, rather
than redirecting the method call to its main package. For internal use.
+=item from_cancel - used when suspending from the cancel method, forces
+this to skip everything besides basic suspension. For internal use.
+
=back
If there is an error, returns the error, otherwise returns false.
my( $self, %options ) = @_;
my $error;
- # pass all suspend/cancel actions to the main package
+ # supplemental packages still can't be separately suspended, but silently
+ # exit instead of failing or passing the action to the main package (so
+ # that the "Suspend customer" action doesn't trip over the supplemental
+ # packages and die)
+
if ( $self->main_pkgnum and !$options{'from_main'} ) {
- return $self->main_pkg->suspend(%options);
+ return;
}
my $oldAutoCommit = $FS::UID::AutoCommit;
}
# some false laziness with sub cancel
- if ( !$options{nobill} && !$date &&
+ if ( !$options{nobill} && !$date && !$options{'from_cancel'} &&
$self->part_pkg->option('bill_suspend_as_cancel',1) ) {
# kind of a kludge--'bill_suspend_as_cancel' to avoid having to
# make the entire cust_main->bill path recognize 'suspend' and
if $error;
}
+ my $cust_pkg_reason;
if ( $options{'reason'} ) {
$error = $self->insert_reason( 'reason' => $options{'reason'},
'action' => $date ? 'adjourn' : 'suspend',
dbh->rollback if $oldAutoCommit;
return "Error inserting cust_pkg_reason: $error";
}
+ $cust_pkg_reason = qsearchs('cust_pkg_reason', {
+ 'date' => $date ? $date : $suspend_time,
+ 'action' => $date ? 'A' : 'S',
+ 'pkgnum' => $self->pkgnum,
+ });
+ }
+
+ # if a reasonnum was passed, get the actual reason object so we can check
+ # unused_credit
+ # (passing a reason hashref is still allowed, but it can't be used with
+ # the fancy behavioral options.)
+
+ my $reason;
+ if ($options{'reason'} =~ /^\d+$/) {
+ $reason = FS::reason->by_key($options{'reason'});
}
my %hash = $self->hash;
return $error;
}
- unless ( $date ) {
- # credit remaining time if appropriate
- if ( $self->part_pkg->option('unused_credit_suspend', 1) ) {
- my $error = $self->credit_remaining('suspend', $suspend_time);
- if ($error) {
- $dbh->rollback if $oldAutoCommit;
- return $error;
+ unless ( $date ) { # then we are suspending now
+
+ unless ($options{'from_cancel'}) {
+ # credit remaining time if appropriate
+ # (if required by the package def, or the suspend reason)
+ my $unused_credit = $self->part_pkg->option('unused_credit_suspend',1)
+ || ( defined($reason) && $reason->unused_credit );
+
+ if ( $unused_credit ) {
+ warn "crediting unused time on pkg#".$self->pkgnum."\n" if $DEBUG;
+ my $error = $self->credit_remaining('suspend', $suspend_time);
+ if ($error) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
}
}
- my @labels = ();
+ my @cust_svc = qsearch( 'cust_svc', { 'pkgnum' => $self->pkgnum } );
+
+ #attempt ordering ala cust_svc_suspend_cascade (without infinite-looping
+ # on the circular dep case)
+ # (this is too simple for multi-level deps, we need to use something
+ # to resolve the DAG properly when possible)
+ my %svcpart = ();
+ $svcpart{$_->svcpart} = 0 foreach @cust_svc;
+ foreach my $svcpart ( keys %svcpart ) {
+ foreach my $part_svc_link (
+ FS::part_svc_link->by_agentnum($self->cust_main->agentnum,
+ src_svcpart => $svcpart,
+ link_type => 'cust_svc_suspend_cascade'
+ )
+ ) {
+ $svcpart{$part_svc_link->dst_svcpart} = max(
+ $svcpart{$part_svc_link->dst_svcpart},
+ $svcpart{$part_svc_link->src_svcpart} + 1
+ );
+ }
+ }
+ @cust_svc = sort { $svcpart{ $a->svcpart } <=> $svcpart{ $b->svcpart } }
+ @cust_svc;
- foreach my $cust_svc (
- qsearch( 'cust_svc', { 'pkgnum' => $self->pkgnum } )
- ) {
- my $part_svc = qsearchs( 'part_svc', { 'svcpart' => $cust_svc->svcpart } );
+ my @labels = ();
+ foreach my $cust_svc ( @cust_svc ) {
+ $cust_svc->suspend( 'labels_arrayref' => \@labels );
+ }
- $part_svc->svcdb =~ /^([\w\-]+)$/ or do {
- $dbh->rollback if $oldAutoCommit;
- return "Illegal svcdb value in part_svc!";
- };
- my $svcdb = $1;
- require "FS/$svcdb.pm";
+ # suspension fees: if there is a feepart, and it's not an unsuspend fee,
+ # and this is not a suspend-before-cancel
+ if ( $cust_pkg_reason ) {
+ my $reason_obj = $cust_pkg_reason->reason;
+ if ( $reason_obj->feepart and
+ ! $reason_obj->fee_on_unsuspend and
+ ! $options{'from_cancel'} ) {
- my $svc = qsearchs( $svcdb, { 'svcnum' => $cust_svc->svcnum } );
- if ($svc) {
- $error = $svc->suspend;
- if ( $error ) {
- $dbh->rollback if $oldAutoCommit;
- return $error;
- }
- my( $label, $value ) = $cust_svc->label;
- push @labels, "$label: $value";
+ # register the need to charge a fee, cust_main->bill will do the rest
+ warn "registering suspend fee: pkgnum ".$self->pkgnum.", feepart ".$reason->feepart."\n"
+ if $DEBUG;
+ my $cust_pkg_reason_fee = FS::cust_pkg_reason_fee->new({
+ 'pkgreasonnum' => $cust_pkg_reason->num,
+ 'pkgnum' => $self->pkgnum,
+ 'feepart' => $reason->feepart,
+ 'nextbill' => $reason->fee_hold,
+ });
+ $error ||= $cust_pkg_reason_fee->insert;
}
}
my $conf = new FS::Conf;
- if ( $conf->config('suspend_email_admin') ) {
+ if ( $conf->config('suspend_email_admin') && !$options{'from_cancel'} ) {
my $error = send_email(
'from' => $conf->config('invoice_from', $self->cust_main->agentnum),
=cut
+# Implementation note:
+#
+# If you pkgpart-change a package that has been billed, and it's set to give
+# credit on package change, then this method gets called and then the new
+# package will have no last_bill date. Therefore the customer will be credited
+# only once (per billing period) even if there are multiple package changes.
+#
+# If you location-change a package that has been billed, this method will NOT
+# be called and the new package WILL have the last bill date of the old
+# package.
+#
+# If the new package is then canceled within the same billing cycle,
+# credit_remaining needs to run calc_remain on the OLD package to determine
+# the amount of unused time to credit.
+
sub credit_remaining {
# Add a credit for remaining service
my ($self, $mode, $time) = @_;
and $next_bill > 0 # the package has a next bill date
and $next_bill >= $time # which is in the future
) {
- my $remaining_value = $self->calc_remain('time' => $time);
+ my @cust_credit_source_bill_pkg = ();
+ my $remaining_value = 0;
+
+ my $remain_pkg = $self;
+ $remaining_value = $remain_pkg->calc_remain(
+ 'time' => $time,
+ 'cust_credit_source_bill_pkg' => \@cust_credit_source_bill_pkg,
+ );
+
+ # we may have to walk back past some package changes to get to the
+ # one that actually has unused time
+ while ( $remaining_value == 0 ) {
+ if ( $remain_pkg->change_pkgnum ) {
+ $remain_pkg = FS::cust_pkg->by_key($remain_pkg->change_pkgnum);
+ } else {
+ # the package has really never been billed
+ return;
+ }
+ $remaining_value = $remain_pkg->calc_remain(
+ 'time' => $time,
+ 'cust_credit_source_bill_pkg' => \@cust_credit_source_bill_pkg,
+ );
+ }
+
if ( $remaining_value > 0 ) {
warn "Crediting for $remaining_value on package ".$self->pkgnum."\n"
if $DEBUG;
$remaining_value,
'Credit for unused time on '. $self->part_pkg->pkg,
'reason_type' => $reason_type,
+ 'cust_credit_source_bill_pkg' => \@cust_credit_source_bill_pkg,
);
return "Error crediting customer \$$remaining_value for unused time".
" on ". $self->part_pkg->pkg. ": $error"
return ""; # no error # complain instead?
}
+ # handle the case of setting a future unsuspend (resume) date
+ # and do not continue to actually unsuspend the package
my $date = $opt{'date'};
if ( $date and $date > time ) { # return an error if $date <= time?
} #if $date
+ if (!$self->setup) {
+ # then this package is being released from on-hold status
+ $error = $self->set_initial_timers;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+ }
+
my @labels = ();
foreach my $cust_svc (
my $conf = new FS::Conf;
#adjust the next bill date forward
- $hash{'bill'} = ( $hash{'bill'} || $hash{'setup'} ) + $inactive
- if $inactive > 0
+ # increment next bill date if certain conditions are met:
+ # - it was due to be billed at some point
+ # - either the global or local config says to do this
+ my $adjust_bill = 0;
+ if (
+ $inactive > 0
&& ( $hash{'bill'} || $hash{'setup'} )
&& ( $opt{'adjust_next_bill'}
|| $conf->exists('unsuspend-always_adjust_next_bill_date')
|| $self->part_pkg->option('unsuspend_adjust_bill', 1)
)
- && ! $self->option('suspend_bill',1)
- && ( ! $self->part_pkg->option('suspend_bill',1)
- || $self->option('no_suspend_bill',1)
- )
- && $hash{'order_date'} != $hash{'susp'}
- ;
+ ) {
+ $adjust_bill = 1;
+ }
+
+ # but not if:
+ # - the package billed during suspension
+ # - or it was ordered on hold
+ # - or the customer was credited for the unused time
+
+ if ( $self->option('suspend_bill',1)
+ or ( $self->part_pkg->option('suspend_bill',1)
+ and ! $self->option('no_suspend_bill',1)
+ )
+ or $hash{'order_date'} == $hash{'susp'}
+ ) {
+ $adjust_bill = 0;
+ }
+
+ if ( $adjust_bill ) {
+ if ( $self->part_pkg->option('unused_credit_suspend')
+ or ( ref($reason) and $reason->unused_credit ) ) {
+ # then the customer was credited for the unused time before suspending,
+ # so their next bill should be immediate
+ $hash{'bill'} = time;
+ } else {
+ # add the length of time suspended to the bill date
+ $hash{'bill'} = ( $hash{'bill'} || $hash{'setup'} ) + $inactive;
+ }
+ }
$hash{'susp'} = '';
$hash{'adjourn'} = '' if $hash{'adjourn'} and $hash{'adjourn'} < time;
my $unsusp_pkg;
- if ( $reason && $reason->unsuspend_pkgpart ) {
- my $part_pkg = FS::part_pkg->by_key($reason->unsuspend_pkgpart)
- or $error = "Unsuspend package definition ".$reason->unsuspend_pkgpart.
- " not found.";
- my $start_date = $self->cust_main->next_bill_date
- if $reason->unsuspend_hold;
-
- if ( $part_pkg ) {
- $unsusp_pkg = FS::cust_pkg->new({
- 'custnum' => $self->custnum,
- 'pkgpart' => $reason->unsuspend_pkgpart,
- 'start_date' => $start_date,
- 'locationnum' => $self->locationnum,
- # discount? probably not...
+ if ( $reason ) {
+ if ( $reason->unsuspend_pkgpart ) {
+ warn "Suspend reason '".$reason->reason."' uses deprecated unsuspend_pkgpart feature.\n";
+ my $part_pkg = FS::part_pkg->by_key($reason->unsuspend_pkgpart)
+ or $error = "Unsuspend package definition ".$reason->unsuspend_pkgpart.
+ " not found.";
+ my $start_date = $self->cust_main->next_bill_date
+ if $reason->unsuspend_hold;
+
+ if ( $part_pkg ) {
+ $unsusp_pkg = FS::cust_pkg->new({
+ 'custnum' => $self->custnum,
+ 'pkgpart' => $reason->unsuspend_pkgpart,
+ 'start_date' => $start_date,
+ 'locationnum' => $self->locationnum,
+ # discount? probably not...
+ });
+
+ $error ||= $self->cust_main->order_pkg( 'cust_pkg' => $unsusp_pkg );
+ }
+ }
+ # new way, using fees
+ if ( $reason->feepart and $reason->fee_on_unsuspend ) {
+ # register the need to charge a fee, cust_main->bill will do the rest
+ warn "registering unsuspend fee: pkgnum ".$self->pkgnum.", feepart ".$reason->feepart."\n"
+ if $DEBUG;
+ my $cust_pkg_reason_fee = FS::cust_pkg_reason_fee->new({
+ 'pkgreasonnum' => $cust_pkg_reason->num,
+ 'pkgnum' => $self->pkgnum,
+ 'feepart' => $reason->feepart,
+ 'nextbill' => $reason->fee_hold,
});
-
- $error ||= $self->cust_main->order_pkg( 'cust_pkg' => $unsusp_pkg );
+ $error ||= $cust_pkg_reason_fee->insert;
}
if ( $error ) {
If unprotect_svcs is true, this method will transfer as many services as
it can and then unconditionally cancel the old package.
+=item contract_end
+
+If specified, sets this value for the contract_end date on the new package
+(without regard for keep_dates or the usual date-preservation behavior.)
+Will throw an error if defined but false; the UI doesn't allow editing
+this unless it already exists, making removal impossible to undo.
+
=back
At least one of locationnum, cust_location, pkgpart, refnum, cust_main, or
=cut
+#used by change and change_later
+#didn't put with documented check methods because it depends on change-specific opts
+#and it also possibly edits the value of opts
+sub _check_change {
+ my $self = shift;
+ my $opt = shift;
+ if ( defined($opt->{'contract_end'}) ) {
+ my $current_contract_end = $self->get('contract_end');
+ unless ($opt->{'contract_end'}) {
+ if ($current_contract_end) {
+ return "Cannot remove contract end date when changing packages";
+ } else {
+ #shouldn't even pass this option if there's not a current value
+ #but can be handled gracefully if the option is empty
+ warn "Contract end date passed unexpectedly";
+ delete $opt->{'contract_end'};
+ return '';
+ }
+ }
+ unless ($current_contract_end) {
+ #option shouldn't be passed, throw error if it's non-empty
+ return "Cannot add contract end date when changing packages " . $self->pkgnum;
+ }
+ }
+ return '';
+}
+
#some false laziness w/order
sub change {
my $self = shift;
my $conf = new FS::Conf;
+ # handle contract_end on cust_pkg same as passed option
+ if ( $opt->{'cust_pkg'} ) {
+ $opt->{'contract_end'} = $opt->{'cust_pkg'}->contract_end;
+ delete $opt->{'contract_end'} unless $opt->{'contract_end'};
+ }
+
+ # check contract_end, prevent adding/removing
+ my $error = $self->_check_change($opt);
+ return $error if $error;
+
# Transactionize this whole mess
my $oldAutoCommit = $FS::UID::AutoCommit;
local $FS::UID::AutoCommit = 0;
my $dbh = dbh;
- my $error;
+ if ( $opt->{'cust_location'} ) {
+ $error = $opt->{'cust_location'}->find_or_insert;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "creating location record: $error";
+ }
+ $opt->{'locationnum'} = $opt->{'cust_location'}->locationnum;
+ }
+
+ # Before going any further here: if the package is still in the pre-setup
+ # state, it's safe to modify it in place. No need to charge/credit for
+ # partial period, transfer services, transfer usage pools, copy invoice
+ # details, or change any dates.
+ if ( ! $self->setup and ! $opt->{cust_pkg} and ! $opt->{cust_main} ) {
+ foreach ( qw( locationnum pkgpart quantity refnum salesnum ) ) {
+ if ( length($opt->{$_}) ) {
+ $self->set($_, $opt->{$_});
+ }
+ }
+ # almost. if the new pkgpart specifies start/adjourn/expire timers,
+ # apply those.
+ if ( $opt->{'pkgpart'} and $opt->{'pkgpart'} != $self->pkgpart ) {
+ $error ||= $self->set_initial_timers;
+ }
+ # but if contract_end was explicitly specified, that overrides all else
+ $self->set('contract_end', $opt->{'contract_end'})
+ if $opt->{'contract_end'};
+ $error ||= $self->replace;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "modifying package: $error";
+ } else {
+ $dbh->commit if $oldAutoCommit;
+ return $self;
+ }
+ }
my %hash = ();
my $time = time;
- $hash{'setup'} = $time if $self->setup;
+ $hash{'setup'} = $time if $self->get('setup');
$hash{'change_date'} = $time;
$hash{"change_$_"} = $self->$_()
foreach qw( pkgnum pkgpart locationnum );
- if ( $opt->{'cust_location'} ) {
- $error = $opt->{'cust_location'}->find_or_insert;
- if ( $error ) {
- $dbh->rollback if $oldAutoCommit;
- return "creating location record: $error";
- }
- $opt->{'locationnum'} = $opt->{'cust_location'}->locationnum;
- }
-
if ( $opt->{'cust_pkg'} ) {
# treat changing to a package with a different pkgpart as a
# pkgpart change (because it is)
my $unused_credit = 0;
my $keep_dates = $opt->{'keep_dates'};
- # Special case. If the pkgpart is changing, and the customer is
- # going to be credited for remaining time, don't keep setup, bill,
- # or last_bill dates, and DO pass the flag to cancel() to credit
- # the customer.
+
+ # Special case. If the pkgpart is changing, and the customer is going to be
+ # credited for remaining time, don't keep setup, bill, or last_bill dates,
+ # and DO pass the flag to cancel() to credit the customer. If the old
+ # package had a setup date, set the new package's setup to the package
+ # change date so that it has the same status as before.
if ( $opt->{'pkgpart'}
and $opt->{'pkgpart'} != $self->pkgpart
and $self->part_pkg->option('unused_credit_change', 1) ) {
$unused_credit = 1;
$keep_dates = 0;
- $hash{$_} = '' foreach qw(setup bill last_bill);
+ $hash{'last_bill'} = '';
+ $hash{'bill'} = '';
}
if ( $keep_dates ) {
- foreach my $date ( qw(setup bill last_bill susp adjourn cancel expire
- resume start_date contract_end ) ) {
+ foreach my $date ( qw(setup bill last_bill) ) {
$hash{$date} = $self->getfield($date);
}
}
- # always keep this date, regardless of anything
- # (the date of the package change is in a different field)
- $hash{'order_date'} = $self->getfield('order_date');
+ # always keep the following dates
+ foreach my $date (qw(order_date susp adjourn cancel expire resume
+ start_date contract_end)) {
+ $hash{$date} = $self->getfield($date);
+ }
+ # but if contract_end was explicitly specified, that overrides all else
+ $hash{'contract_end'} = $opt->{'contract_end'}
+ if $opt->{'contract_end'};
# allow $opt->{'locationnum'} = '' to specifically set it to null
# (i.e. customer default location)
# 2. (more importantly) changing a package before it's billed
$hash{'waive_setup'} = $self->waive_setup;
+ # if this package is scheduled for a future package change, preserve that
+ $hash{'change_to_pkgnum'} = $self->change_to_pkgnum;
+
my $custnum = $self->custnum;
if ( $opt->{cust_main} ) {
my $cust_main = $opt->{cust_main};
# changed from this package.
$cust_pkg = $opt->{'cust_pkg'};
- foreach ( qw( pkgnum pkgpart locationnum ) ) {
- $cust_pkg->set("change_$_", $self->get($_));
+ # follow all the above rules for date changes, etc.
+ foreach (keys %hash) {
+ $cust_pkg->set($_, $hash{$_});
+ }
+ # except those that implement the future package change behavior
+ foreach (qw(change_to_pkgnum start_date expire)) {
+ $cust_pkg->set($_, '');
}
- $cust_pkg->set('change_date', $time);
+
$error = $cust_pkg->replace;
} else {
}
# Transfer services and cancel old package.
-
+ # Enforce service limits only if this is a pkgpart change.
+ local $FS::cust_svc::ignore_quantity;
+ $FS::cust_svc::ignore_quantity = 1 if $same_pkgpart;
$error = $self->transfer($cust_pkg);
if ($error and $error == 0) {
# $old_pkg->transfer failed.
}
}
- # transfer usage pricing add-ons, if we're not changing pkgpart
- if ( $same_pkgpart ) {
- foreach my $old_cust_pkg_usageprice ($self->cust_pkg_usageprice) {
+ # transfer usage pricing add-ons, if we're not changing pkgpart or if they were specified
+ if ( $same_pkgpart || $opt->{'cust_pkg_usageprice'}) {
+ my @old_cust_pkg_usageprice;
+ if ($opt->{'cust_pkg_usageprice'}) {
+ @old_cust_pkg_usageprice = @{ $opt->{'cust_pkg_usageprice'} };
+ } else {
+ @old_cust_pkg_usageprice = $self->cust_pkg_usageprice;
+ }
+ foreach my $old_cust_pkg_usageprice (@old_cust_pkg_usageprice) {
my $new_cust_pkg_usageprice = new FS::cust_pkg_usageprice {
'pkgnum' => $cust_pkg->pkgnum,
'usagepricepart' => $old_cust_pkg_usageprice->usagepricepart,
unused_credit => $unused_credit,
nobill => $keep_dates,
change_custnum => ( $self->custnum != $custnum ? $custnum : '' ),
+ no_delay_cancel => 1,
);
if ($error) {
$dbh->rollback if $oldAutoCommit;
=item quantity
-The pkgpart. locationnum, and quantity of the new package, with the same
-meaning as in C<change>.
+=item contract_end
+
+The pkgpart, locationnum, quantity and optional contract_end of the new
+package, with the same meaning as in C<change>.
=back
my $self = shift;
my $opt = ref($_[0]) ? shift : { @_ };
+ # check contract_end, prevent adding/removing
+ my $error = $self->_check_change($opt);
+ return $error if $error;
+
my $oldAutoCommit = $FS::UID::AutoCommit;
local $FS::UID::AutoCommit = 0;
my $dbh = dbh;
return "start_date $date is in the past";
}
- my $error;
-
if ( $self->change_to_pkgnum ) {
my $change_to = FS::cust_pkg->by_key($self->change_to_pkgnum);
my $new_pkgpart = $opt->{'pkgpart'}
if $opt->{'locationnum'} and $opt->{'locationnum'} != $change_to->locationnum;
my $new_quantity = $opt->{'quantity'}
if $opt->{'quantity'} and $opt->{'quantity'} != $change_to->quantity;
- if ( $new_pkgpart or $new_locationnum or $new_quantity ) {
+ my $new_contract_end = $opt->{'contract_end'}
+ if $opt->{'contract_end'} and $opt->{'contract_end'} != $change_to->contract_end;
+ if ( $new_pkgpart or $new_locationnum or $new_quantity or $new_contract_end ) {
# it hasn't been billed yet, so in principle we could just edit
# it in place (w/o a package change), but that's bad form.
# So change the package according to the new options...
$error = $self->replace ||
$err_or_pkg->replace ||
- $change_to->cancel ||
- $change_to->delete;
+ #because change() might've edited existing scheduled change in place
+ (($err_or_pkg->pkgnum == $change_to->pkgnum) ? '' :
+ $change_to->cancel('no_delay_cancel' => 1) ||
+ $change_to->delete);
} else {
$error = $err_or_pkg;
}
if $opt->{'locationnum'} and $opt->{'locationnum'} != $self->locationnum;
my $new_quantity = $opt->{'quantity'}
if $opt->{'quantity'} and $opt->{'quantity'} != $self->quantity;
+ my $new_contract_end = $opt->{'contract_end'}
+ if $opt->{'contract_end'} and $opt->{'contract_end'} != $self->contract_end;
- return '' unless $new_pkgpart or $new_locationnum or $new_quantity; # wouldn't do anything
+ return '' unless $new_pkgpart or $new_locationnum or $new_quantity or $new_contract_end; # wouldn't do anything
# allow $opt->{'locationnum'} = '' to specifically set it to null
# (i.e. customer default location)
locationnum => $opt->{'locationnum'},
start_date => $date,
map { $_ => ( $opt->{$_} || $self->$_() ) }
- qw( pkgpart quantity refnum salesnum )
+ qw( pkgpart quantity refnum salesnum contract_end )
} );
$error = $new->insert('change' => 1,
'allow_pkgpart' => ($new_pkgpart ? 0 : 1));
sub abort_change {
my $self = shift;
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::AutoCommit = 0;
+
my $pkgnum = $self->change_to_pkgnum;
my $change_to = FS::cust_pkg->by_key($pkgnum) if $pkgnum;
my $error;
- if ( $change_to ) {
- $error = $change_to->cancel || $change_to->delete;
- return $error if $error;
- }
$self->set('change_to_pkgnum', '');
$self->set('expire', '');
- $self->replace;
+ $error = $self->replace;
+ if ( $change_to ) {
+ $error ||= $change_to->cancel || $change_to->delete;
+ }
+
+ if ( $oldAutoCommit ) {
+ if ( $error ) {
+ dbh->rollback;
+ } else {
+ dbh->commit;
+ }
+ }
+
+ return $error;
}
=item set_quantity QUANTITY
- start_date: the date when it will be billed
- amount: the setup fee to be charged
- quantity: the multiplier for the setup fee
+- separate_bill: whether to put the charge on a separate invoice
If you pass 'adjust_commission' => 1, and the classnum changes, and there are
commission credits linked to this charge, they will be recalculated.
}
if ( !$self->get('setup') ) {
- # not yet billed, so allow amount and quantity
+ # not yet billed, so allow amount, setup_cost, quantity, start_date,
+ # and separate_bill
+
+ if ( exists($opt{'amount'})
+ and $part_pkg->option('setup_fee') != $opt{'amount'}
+ and $opt{'amount'} > 0 ) {
+
+ $pkg_opt{'setup_fee'} = $opt{'amount'};
+ $pkg_opt_modified = 1;
+ }
+
+ if ( exists($opt{'setup_cost'})
+ and $part_pkg->setup_cost != $opt{'setup_cost'}
+ and $opt{'setup_cost'} > 0 ) {
+
+ $part_pkg->set('setup_cost', $opt{'setup_cost'});
+ }
+
if ( exists($opt{'quantity'})
and $opt{'quantity'} != $self->quantity
and $opt{'quantity'} > 0 ) {
$self->set('quantity', $opt{'quantity'});
}
+
if ( exists($opt{'start_date'})
and $opt{'start_date'} != $self->start_date ) {
$self->set('start_date', $opt{'start_date'});
}
- if ( exists($opt{'amount'})
- and $part_pkg->option('setup_fee') != $opt{'amount'}
- and $opt{'amount'} > 0 ) {
-
- $pkg_opt{'setup_fee'} = $opt{'amount'};
- $pkg_opt_modified = 1;
+ if ( exists($opt{'separate_bill'})
+ and $opt{'separate_bill'} ne $self->separate_bill ) {
+ $self->set('separate_bill', $opt{'separate_bill'});
}
+
+
} # else simply ignore them; the UI shouldn't allow editing the fields
+
+ if ( exists($opt{'taxclass'})
+ and $part_pkg->taxclass ne $opt{'taxclass'}) {
+
+ $part_pkg->set('taxclass', $opt{'taxclass'});
+ }
+
my $error;
if ( $part_pkg->modified or $pkg_opt_modified ) {
# can we safely modify the package def?
-use Storable 'thaw';
-use MIME::Base64;
use Data::Dumper;
sub process_bulk_cust_pkg {
my $job = shift;
- my $param = thaw(decode_base64(shift));
+ my $param = shift;
warn Dumper($param) if $DEBUG;
my $old_part_pkg = qsearchs('part_pkg',
}
my %search = (
- 'table' => 'cust_svc',
- 'hashref' => { 'pkgnum' => $self->pkgnum },
+ 'select' => 'cust_svc.*, part_svc.*',
+ 'table' => 'cust_svc',
+ 'hashref' => { 'pkgnum' => $self->pkgnum },
+ 'addl_from' => 'LEFT JOIN part_svc USING ( svcpart )',
);
- if ( $opt{svcpart} ) {
- $search{hashref}->{svcpart} = $opt{'svcpart'};
- }
- if ( $opt{'svcdb'} ) {
- $search{addl_from} = ' LEFT JOIN part_svc USING ( svcpart ) ';
- $search{extra_sql} = ' AND svcdb = '. dbh->quote( $opt{'svcdb'} );
- }
+ $search{hashref}->{svcpart} = $opt{svcpart}
+ if $opt{svcpart};
+ $search{extra_sql} = ' AND svcdb = '. dbh->quote( $opt{svcdb} )
+ if $opt{svcdb};
[ qsearch(\%search) ];
if $DEBUG;
my ($end, $start, $mode) = @_;
+
+ local($FS::Record::qsearch_qualify_columns) = 0;
+
my @cust_svc = $self->_sort_cust_svc(
[ qsearch( 'h_cust_svc',
{ 'pkgnum' => $self->pkgnum, },
FS::h_cust_svc->sql_h_search(@_),
) ]
);
+
if ( defined($mode) && $mode eq 'I' ) {
my %hidden_svcpart = map { $_->svcpart => $_->hidden } $self->part_svc;
return grep { !$hidden_svcpart{$_->svcpart} } @cust_svc;
package but not yet provisioned. Each FS::part_svc object also has an extra
field, I<num_avail>, which specifies the number of available services.
+Accepts option I<provision_hold>; if true, only returns part_svc for which the
+associated pkg_svc has the provision_hold flag set.
+
=cut
sub available_part_svc {
my $self = shift;
+ my %opt = @_;
my $pkg_quantity = $self->quantity || 1;
grep { $_->num_avail > 0 }
- map {
- my $part_svc = $_->part_svc;
- $part_svc->{'Hash'}{'num_avail'} = #evil encapsulation-breaking
- $pkg_quantity * $_->quantity - $self->num_cust_svc($_->svcpart);
-
- # more evil encapsulation breakage
- if($part_svc->{'Hash'}{'num_avail'} > 0) {
- my @exports = $part_svc->part_export_did;
- $part_svc->{'Hash'}{'can_get_dids'} = scalar(@exports);
- }
-
- $part_svc;
- }
- $self->part_pkg->pkg_svc;
+ map {
+ my $part_svc = $_->part_svc;
+ $part_svc->{'Hash'}{'num_avail'} = #evil encapsulation-breaking
+ $pkg_quantity * $_->quantity - $self->num_cust_svc($_->svcpart);
+
+ # more evil encapsulation breakage
+ if ($part_svc->{'Hash'}{'num_avail'} > 0) {
+ my @exports = $part_svc->part_export_did;
+ $part_svc->{'Hash'}{'can_get_dids'} = scalar(@exports);
+ }
+
+ $part_svc;
+ }
+ grep { $opt{'provision_hold'} ? $_->provision_hold : 1 }
+ $self->part_pkg->pkg_svc;
}
=item part_svc [ OPTION => VALUE ... ]
=cut
tie my %statuscolor, 'Tie::IxHash',
- 'on hold' => '7E0079', #purple!
+ 'on hold' => 'FF00F5', #brighter purple!
'not yet billed' => '009999', #teal? cyan?
'one-time charge' => '0000CC', #blue #'000000',
'active' => '00CC00',
$statuscolor{$self->status};
}
+=item is_status_delay_cancel
+
+Returns true if part_pkg has option delay_cancel,
+cust_pkg status is 'suspended' and expire is set
+to cancel package within the next day (or however
+many days are set in global config part_pkg-delay_cancel-days.
+
+Accepts option I<part_pkg-delay_cancel-days> which should be
+the value of the config setting, to avoid looking it up again.
+
+This is not a real status, this only meant for hacking display
+values, because otherwise treating the package as suspended is
+really the whole point of the delay_cancel option.
+
+=cut
+
+sub is_status_delay_cancel {
+ my ($self,%opt) = @_;
+ if ( $self->main_pkgnum and $self->pkglinknum ) {
+ return $self->main_pkg->is_status_delay_cancel;
+ }
+ return 0 unless $self->part_pkg->option('delay_cancel',1);
+ return 0 unless $self->status eq 'suspended';
+ return 0 unless $self->expire;
+ my $expdays = $opt{'part_pkg-delay_cancel-days'};
+ unless ($expdays) {
+ my $conf = new FS::Conf;
+ $expdays = $conf->config('part_pkg-delay_cancel-days') || 1;
+ }
+ my $expsecs = 60*60*24*$expdays;
+ return 0 unless $self->expire < time + $expsecs;
+ return 1;
+}
+
=item pkg_label
Returns a label for this package. (Currently "pkgnum: pkg - comment" or
$reasonnum = $reason->reasonnum;
} else {
- return "Unparsable reason: ". $options{'reason'};
+ return "Unparseable reason: ". $options{'reason'};
}
my $cust_pkg_reason =
Associates this package with a discount (see L<FS::cust_pkg_discount>, possibly
inserting a new discount on the fly (see L<FS::discount>).
-Available options are:
-
-=over 4
-
-=item discountnum
-
-=back
+This will look at the cust_pkg for a pseudo-field named "setup_discountnum",
+and if present, will create a setup discount. If the discountnum is -1,
+a new discount definition will be inserted using the value in
+"setup_discountnum_amount" or "setup_discountnum_percent". Likewise for recur.
If there is an error, returns the error, otherwise returns false.
#my ($self, %options) = @_;
my $self = shift;
- my $cust_pkg_discount = new FS::cust_pkg_discount {
- 'pkgnum' => $self->pkgnum,
- 'discountnum' => $self->discountnum,
- 'months_used' => 0,
- 'end_date' => '', #XXX
- #for the create a new discount case
- '_type' => $self->discountnum__type,
- 'amount' => $self->discountnum_amount,
- 'percent' => $self->discountnum_percent,
- 'months' => $self->discountnum_months,
- 'setup' => $self->discountnum_setup,
- #'disabled' => $self->discountnum_disabled,
- };
+ foreach my $x (qw(setup recur)) {
+ if ( my $discountnum = $self->get("${x}_discountnum") ) {
+ my $cust_pkg_discount = FS::cust_pkg_discount->new( {
+ 'pkgnum' => $self->pkgnum,
+ 'discountnum' => $discountnum,
+ 'setuprecur' => $x,
+ 'months_used' => 0,
+ 'end_date' => '', #XXX
+ #for the create a new discount case
+ 'amount' => $self->get("${x}_discountnum_amount"),
+ 'percent' => $self->get("${x}_discountnum_percent"),
+ 'months' => $self->get("${x}_discountnum_months"),
+ } );
+ if ( $x eq 'setup' ) {
+ $cust_pkg_discount->setup('Y');
+ $cust_pkg_discount->months('');
+ }
+ my $error = $cust_pkg_discount->insert;
+ return $error if $error;
+ }
+ }
- $cust_pkg_discount->insert;
+ '';
}
=item set_usage USAGE_VALUE_HASHREF
=item order CUSTNUM, PKGPARTS_ARYREF, [ REMOVE_PKGNUMS_ARYREF [ RETURN_CUST_PKG_ARRAYREF [ REFNUM ] ] ]
+Bulk cancel + order subroutine. Perhaps slightly deprecated, only used by the
+bulk cancel+order in the web UI and nowhere else (edit/process/cust_pkg.cgi)
+
CUSTNUM is a customer (see L<FS::cust_main>)
PKGPARTS is a list of pkgparts specifying the the billing item definitions (see
$dbh->rollback if $oldAutoCommit;
return "Unable to transfer all services from package ".$old_pkg->pkgnum;
}
- $error = $old_pkg->cancel( quiet=>1 );
+ $error = $old_pkg->cancel( quiet=>1, 'no_delay_cancel'=>1 );
if ($error) {
$dbh->rollback;
return $error;
'';
}
+=item forward_emails
+
+Returns a hash of svcnums and corresponding email addresses
+for svc_acct services that can be used as source or dest
+for svc_forward services provisioned in this package.
+
+Accepts options I<svc_forward> OR I<svcnum> for a svc_forward
+service; if included, will ensure the current values of the
+specified service are included in the list, even if for some
+other reason they wouldn't be. If called as a class method
+with a specified service, returns only these current values.
+
+Caution: does not actually check if svc_forward services are
+available to be provisioned on this package.
+
+=cut
+
+sub forward_emails {
+ my $self = shift;
+ my %opt = @_;
+
+ #load optional service, thoroughly validated
+ die "Use svcnum or svc_forward, not both"
+ if $opt{'svcnum'} && $opt{'svc_forward'};
+ my $svc_forward = $opt{'svc_forward'};
+ $svc_forward ||= qsearchs('svc_forward',{ 'svcnum' => $opt{'svcnum'} })
+ if $opt{'svcnum'};
+ die "Specified service is not a forward service"
+ if $svc_forward && (ref($svc_forward) ne 'FS::svc_forward');
+ die "Specified service not found"
+ if ($opt{'svcnum'} || $opt{'svc_forward'}) && !$svc_forward;
+
+ my %email;
+
+ ## everything below was basically copied from httemplate/edit/svc_forward.cgi
+ ## with minimal refactoring, not sure why we can't just load all svc_accts for this custnum
+
+ #add current values from specified service, if there was one
+ if ($svc_forward) {
+ foreach my $method (qw( srcsvc_acct dstsvc_acct )) {
+ my $svc_acct = $svc_forward->$method();
+ $email{$svc_acct->svcnum} = $svc_acct->email if $svc_acct;
+ }
+ }
+
+ if (ref($self) eq 'FS::cust_pkg') {
+
+ #and including the rest for this customer
+ my($u_part_svc,@u_acct_svcparts);
+ foreach $u_part_svc ( qsearch('part_svc',{'svcdb'=>'svc_acct'}) ) {
+ push @u_acct_svcparts,$u_part_svc->getfield('svcpart');
+ }
+
+ my $custnum = $self->getfield('custnum');
+ foreach my $i_cust_pkg ( qsearch('cust_pkg',{'custnum'=>$custnum}) ) {
+ my $cust_pkgnum = $i_cust_pkg->getfield('pkgnum');
+ #now find the corresponding record(s) in cust_svc (for this pkgnum!)
+ foreach my $acct_svcpart (@u_acct_svcparts) {
+ foreach my $i_cust_svc (
+ qsearch( 'cust_svc', { 'pkgnum' => $cust_pkgnum,
+ 'svcpart' => $acct_svcpart } )
+ ) {
+ my $svc_acct = qsearchs( 'svc_acct', { 'svcnum' => $i_cust_svc->svcnum } );
+ $email{$svc_acct->svcnum} = $svc_acct->email;
+ }
+ }
+ }
+ }
+
+ return %email;
+}
+
# Used by FS::Upgrade to migrate to a new database.
sub _upgrade_data { # class method
my ($class, %opts) = @_;
my $sth = dbh->prepare($sql);
$sth->execute or die $sth->errstr;
}
+
+ # RT31194: supplemental package links that are deleted don't clean up
+ # linked records
+ my @pkglinknums = qsearch({
+ 'select' => 'DISTINCT cust_pkg.pkglinknum',
+ 'table' => 'cust_pkg',
+ 'addl_from' => ' LEFT JOIN part_pkg_link USING (pkglinknum) ',
+ 'extra_sql' => ' WHERE cust_pkg.pkglinknum IS NOT NULL
+ AND part_pkg_link.pkglinknum IS NULL',
+ });
+ foreach (@pkglinknums) {
+ my $pkglinknum = $_->pkglinknum;
+ warn "cleaning part_pkg_link #$pkglinknum\n";
+ my $part_pkg_link = FS::part_pkg_link->new({pkglinknum => $pkglinknum});
+ my $error = $part_pkg_link->remove_linked;
+ die $error if $error;
+ }
}
=back