+ },
+
+ #Operator Specific Information: beyond the scope of TAP and has been bilaterally agreed
+ 'operatorSpecInformation' => [
+ $self->userfield, ##'|Seq: 178 Loc: 1|'
+ ],
+
+ #The type of service used together with all related charging information
+ 'basicServiceUsedList' => [
+ {
+ #identifies the actual Basic Service used
+ 'basicService' => {
+ #one of Teleservice Code or Bearer Service Code as determined by the service type used
+ 'serviceCode' => {
+ #XXX
+ #00 All teleservices
+ #10 All Speech transmission services
+ #11 Telephony
+ #12 Emergency calls
+ #20 All SMS Services
+ #21 Short Message MT/PP
+ #22 Short Message MO/PP
+ #60 All Fax Services
+ #61 Facsimile Group 3 & alternative speech
+ #62 Automatic Facsimile Group 3
+ #63 Automatic Facsimile Group 4
+ #70 All data teleservices (compound)
+ #80 All teleservices except SMS (compound)
+ #90 All voice group call services
+ #91 Voice group call
+ #92 Voice broadcast call
+ 'teleServiceCode' => $self->servicecode, #'11'
+
+ #Bearer Service Code
+ # Must be present within group Service Code where the type of service used
+ # was a bearer service. Must not be present when the type of service used
+ # was a tele service and, therefore, Teleservice Code is present.
+ # Group Bearer Codes, identifiable by the description ‘All’, should only
+ # be used where details of the specific services affected are not
+ # available from the network.
+ #00 All Bearer Services
+ #20 All Data Circuit Asynchronous Services
+ #21 Duplex Asynch. 300bps data circuit
+ #22 Duplex Asynch. 1200bps data circuit
+ #23 Duplex Asynch. 1200/75bps data circuit
+ #24 Duplex Asynch. 2400bps data circuit
+ #25 Duplex Asynch. 4800bps data circuit
+ #26 Duplex Asynch. 9600bps data circuit
+ #27 General Data Circuit Asynchronous Service
+ #30 All Data Circuit Synchronous Services
+ #32 Duplex Synch. 1200bps data circuit
+ #34 Duplex Synch. 2400bps data circuit
+ #35 Duplex Synch. 4800bps data circuit
+ #36 Duplex Synch. 9600bps data circuit
+ #37 General Data Circuit Synchronous Service
+ #40 All Dedicated PAD Access Services
+ #41 Duplex Asynch. 300bps PAD access
+ #42 Duplex Asynch. 1200bps PAD access
+ #43 Duplex Asynch. 1200/75bps PAD access
+ #44 Duplex Asynch. 2400bps PAD access
+ #45 Duplex Asynch. 4800bps PAD access
+ #46 Duplex Asynch. 9600bps PAD access
+ #47 General PAD Access Service
+ #50 All Dedicated Packet Access Services
+ #54 Duplex Synch. 2400bps PAD access
+ #55 Duplex Synch. 4800bps PAD access
+ #56 Duplex Synch. 9600bps PAD access
+ #57 General Packet Access Service
+ #60 All Alternat Speech/Asynchronous Services
+ #70 All Alternate Speech/Synchronous Services
+ #80 All Speech followed by Data Asynchronous Services
+ #90 All Speech followed by Data Synchronous Services
+ #A0 All Data Circuit Asynchronous Services (compound)
+ #B0 All Data Circuit Synchronous Services (compound)
+ #C0 All Asynchronous Services (compound)
+ }
+ #conditionally also contain the following for UMTS: Transparency Indicator, Fixed Network User
+ # Rate, User Protocol Indicator, Guaranteed Bit Rate and Maximum Bit Rate
+ },
+
+ #Charge information is provided for all chargeable elements except within Messaging Event and Mobile Session call events
+ # must contain Charged Item and at least one occurrence of Charge Detail
+ 'chargeInformationList' => [
+ {
+ #XXX
+ #mandatory
+ # the charging principle applied and the unitisation of Chargeable Units. It
+ # is not intended to identify the service used.
+ #A: Call set up attempt
+ #C: Content
+ #D: Duration based charge
+ #E: Event based charge
+ #F: Fixed (one-off) charge
+ #L: Calendar (for example daily usage charge)
+ #V: Volume (outgoing) based charge
+ #W: Volume (incoming) based charge
+ #X: Volume (total volume) based charge
+ #(?? fields to be used as a basis for the calculation of the correct Charge
+ # A: Chargeable Units (if present)
+ # D,V,W,X: Chargeable Units
+ # C: Depends on the content
+ # E: Not Applicable
+ # F: Not Applicable
+ # L: Call Event Start Timestamp)
+ 'chargedItem' => 'D',
+
+ # the IOT used by the VPMN to price the call
+ 'callTypeGroup' => {
+
+ #The highest category call type in respect of the destination of the call
+ #0: Unknown/Not Applicable
+ #1: National
+ #2: International
+ #10: HGGSN/HP-GW
+ #11: VGGSN/VP-GW
+ #12: Other GGSN/Other P-GW
+ #100: WLAN
+ 'callTypeLevel1' => $self->calltypenum,
+
+ #the sub category of Call Type Level 1
+ #0: Unknown/Not Applicable
+ #1: Mobile
+ #2: PSTN
+ #3: Non Geographic
+ #4: Premium Rate
+ #5: Satellite destination
+ #6: Forwarded call
+ #7: Non forwarded call
+ #10: Broadband
+ #11: Narrowband
+ #12: Conversational
+ #13: Streaming
+ #14: Interactive
+ #15: Background
+ 'callTypeLevel2' => 0,
+
+ #the sub category of Call Type Level 2
+ 'callTypeLevel3' => 0,
+ },
+
+ #mandatory, at least one occurence must be present
+ #A repeating group detailing the Charge and/or charge element
+ # Note that, where a Charge has been levied, even where that Charge is zero,
+ # there must be one occurance, and only one, with a Charge Type of '00'
+ 'chargeDetailList' => [
+ {
+ #mandatory
+ # after discounts have been deducted but before any tax is added
+ 'charge' => $self->rated_price * 100000, #XXX numberOfDecimalPlaces
+
+ #mandatory
+ # the type of charge represented
+ #00: Total charge for Charge Information (the invoiceable value)
+ #01: Airtime charge
+ #02: reserved
+ #03: Toll charge
+ #04: Directory assistance
+ #05–20: reserved
+ #21: VPMN surcharge
+ #50: Total charge for Charge Information according to the published IOT
+ # Note that the use of value 50 is only for use by bilateral agreement, use without
+ # bilateral agreement can be treated as per reserved values, that is ‘out of range’
+ #69–99: reserved
+ 'chargeType' => '00',
+
+ #conditional
+ # the number of units which are chargeable within the Charge Detail, this may not
+ # correspond to the number of rounded units charged.
+ # The item Charged Item defines what the units represent.
+ 'chargeableUnits' => $self->quantity_able,
+
+ #optional
+ # the rounded number of units which are actually charged for
+ 'chargedUnits' => $self->quantity,
+ }
+ ],
+ 'exchangeRateCode' => 1, #from header
+ }
+ ]
+ }
+ ],
+
+ #MO Basic Call Information provides the basic detail of who made the call and where to in respect of mobile originated traffic.
+ 'basicCallInformation' => {
+ #mandatory
+ # the identification of the chargeable subscriber.
+ # The group must contain either the IMSI or the MIN of the Chargeable Subscriber, but not both.
+ 'chargeableSubscriber' => {
+ 'simChargeableSubscriber' => {
+ 'msisdn' => $self->charged_party, #src
+ 'imsi' => $self->charged_party_imsi,
+ }
+ },
+ # the start of the call event
+ 'callEventStartTimeStamp' => {
+ 'localTimeStamp' => time2str('%Y%m%d%H%M%S', $self->startdate),
+ 'utcTimeOffsetCode' => 1
+ },
+
+ # the actual total duration of a call event as a number of seconds
+ 'totalCallEventDuration' => $self->duration,
+
+ #conditional
+ # the number dialled by the subscriber (Called Number)
+ # or the SMSC Address in case of SMS usage or in cases involving supplementary services
+ # such as call forwarding or transfer etc., the number to which the call is routed
+ 'destination' => {
+ #the international representation of the destination
+ 'calledNumber' => $self->dst,
+
+ #the actual digits as dialled by the subscriber, i.e. unmodified, in establishing a call
+ # This will contain ‘+’ and ‘#’ where appropriate.
+ #'dialledDigits' => '322221350'
+ },
+ }
+ }
+ };
+