1 # BEGIN BPS TAGGED BLOCK {{{
5 # This software is Copyright (c) 1996-2009 Best Practical Solutions, LLC
6 # <jesse@bestpractical.com>
8 # (Except where explicitly superseded by other copyright notices)
13 # This work is made available to you under the terms of Version 2 of
14 # the GNU General Public License. A copy of that license should have
15 # been provided with this software, but in any event can be snarfed
18 # This work is distributed in the hope that it will be useful, but
19 # WITHOUT ANY WARRANTY; without even the implied warranty of
20 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 # General Public License for more details.
23 # You should have received a copy of the GNU General Public License
24 # along with this program; if not, write to the Free Software
25 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
26 # 02110-1301 or visit their web page on the internet at
27 # http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
30 # CONTRIBUTION SUBMISSION POLICY:
32 # (The following paragraph is not intended to limit the rights granted
33 # to you to modify and distribute this software under the terms of
34 # the GNU General Public License and is only of importance to you if
35 # you choose to contribute your changes and enhancements to the
36 # community by submitting them to Best Practical Solutions, LLC.)
38 # By intentionally submitting any modifications, corrections or
39 # derivatives to this work, or any other work intended for use with
40 # Request Tracker, to Best Practical Solutions, LLC, you confirm that
41 # you are the copyright holder for those contributions and you grant
42 # Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
43 # royalty-free, perpetual, license to use, copy, create derivative
44 # works based on those contributions, and sublicense and distribute
45 # those contributions and any derivatives thereof.
47 # END BPS TAGGED BLOCK }}}
49 # DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
50 # Have a look at "configure" and "Makefile.in" instead
57 RT_LAYOUT = @rt_layout_name@
59 CONFIG_FILE_PATH = @CONFIG_FILE_PATH_R@
60 CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
61 SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
64 RT_VERSION_MAJOR = @RT_VERSION_MAJOR@
65 RT_VERSION_MINOR = @RT_VERSION_MINOR@
66 RT_VERSION_PATCH = @RT_VERSION_PATCH@
68 RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
69 TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
72 # This is the group that all of the installed files will be chgrp'ed to.
76 # User which should own rt binaries.
77 BIN_OWNER = @BIN_OWNER@
79 # User that should own all of RT's libraries, generally root.
80 LIBS_OWNER = @LIBS_OWNER@
82 # Group that should own all of RT's libraries, generally root.
83 LIBS_GROUP = @LIBS_GROUP@
86 WEB_GROUP = @WEB_GROUP@
89 APACHECTL = @APACHECTL@
91 # {{{ Files and directories
93 # DESTDIR allows you to specify that RT be installed somewhere other than
94 # where it will eventually reside. DESTDIR _must_ have a trailing slash
101 RT_PATH = @RT_PATH_R@
102 RT_ETC_PATH = @RT_ETC_PATH_R@
103 RT_BIN_PATH = @RT_BIN_PATH_R@
104 RT_SBIN_PATH = @RT_SBIN_PATH_R@
105 RT_LIB_PATH = @RT_LIB_PATH_R@
106 RT_MAN_PATH = @RT_MAN_PATH_R@
107 RT_VAR_PATH = @RT_VAR_PATH_R@
108 RT_DOC_PATH = @RT_DOC_PATH_R@
109 RT_LOCAL_PATH = @RT_LOCAL_PATH_R@
110 LOCAL_PLUGIN_PATH = @RT_LOCAL_PATH_R@/plugins
111 LOCAL_ETC_PATH = @LOCAL_ETC_PATH_R@
112 LOCAL_LIB_PATH = @LOCAL_LIB_PATH_R@
113 LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH_R@
114 MASON_HTML_PATH = @MASON_HTML_PATH_R@
115 MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH_R@
116 MASON_DATA_PATH = @MASON_DATA_PATH_R@
117 MASON_SESSION_PATH = @MASON_SESSION_PATH_R@
118 RT_LOG_PATH = @RT_LOG_PATH_R@
120 # RT_READABLE_DIR_MODE is the mode of directories that are generally meant
122 RT_READABLE_DIR_MODE = 0755
127 # {{{ all these define the places that RT's binaries should get installed
129 # RT_MODPERL_HANDLER is the mason handler script for mod_perl
130 RT_MODPERL_HANDLER = webmux.pl
131 # RT_STANDALONE_SERVER is a stand-alone HTTP server
132 RT_STANDALONE_SERVER = standalone_httpd
133 # RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
134 RT_SPEEDYCGI_HANDLER = mason_handler.scgi
135 # RT_FASTCGI_HANDLER is the mason handler script for FastCGI
136 RT_FASTCGI_HANDLER = mason_handler.fcgi
137 # RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
138 RT_WIN32_FASTCGI_HANDLER = mason_handler.svc
142 RT_MAILGATE_BIN = rt-mailgate
144 RT_CRON_BIN = rt-crontool
149 BINARIES = $(RT_MODPERL_HANDLER) \
153 $(RT_STANDALONE_SERVER) \
154 $(RT_SPEEDYCGI_HANDLER) \
155 $(RT_FASTCGI_HANDLER) \
156 $(RT_WIN32_FASTCGI_HANDLER)
162 SYSTEM_BINARIES = rt-dump-database \
165 rt-email-dashboards \
166 rt-email-group-admin \
168 rt-test-dependencies \
174 ETC_FILES = acl.Informix \
192 WEB_HANDLER = @WEB_HANDLER@
199 # DB_TYPE defines what sort of database RT trys to talk to
200 # "mysql" is known to work.
201 # "Pg" is known to work
202 # "Informix" is known to work
206 # Set DBA to the name of a unix account with the proper permissions and
207 # environment to run your commandline SQL sbin
209 # Set DB_DBA to the name of a DB user with permission to create new databases
211 # For mysql, you probably want 'root'
212 # For Pg, you probably want 'postgres'
213 # For Oracle, you want 'system'
214 # For Informix, you want 'informix'
220 # If you're not running your database server on its default port,
221 # specifiy the port the database server is running on below.
222 # It's generally safe to leave this blank
230 # Set this to the canonical name of the interface RT will be talking to the
231 # database on. If you said that the RT_DB_HOST above was "localhost," this
232 # should be too. This value will be used to grant rt access to the database.
233 # If you want to access the RT database from multiple hosts, you'll need
234 # to grant those database rights by hand.
237 DB_RT_HOST = @DB_RT_HOST@
239 # set this to the name you want to give to the RT database in
240 # your database server. For Oracle, this should be the name of your sid
242 DB_DATABASE = @DB_DATABASE@
243 DB_RT_USER = @DB_RT_USER@
244 DB_RT_PASS = @DB_RT_PASS@
249 TEST_FILES = t/*.t t/*/*.t
253 ####################################################################
258 @echo "Please read RT's README before beginning your installation."
263 @echo "Congratulations. RT is now installed."
266 @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
268 @echo "(You will definitely need to set RT's database password in "
269 @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
270 @echo "very dangerous. Note that you do not have to manually add a "
271 @echo "database user or set up a database for RT. These actions will be "
272 @echo "taken care of in the next step.)"
274 @echo "After that, you need to initialize RT's database by running"
275 @echo " 'make initialize-database'"
279 @echo "Congratulations. RT has been upgraded. You should now check over"
280 @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
281 @echo "you should update RT's system database objects by running "
282 @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action upgrade"
285 upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
287 upgrade-noclobber: config-install dirs libs-install html-install bin-install local-install doc-install fixperms
292 my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
294 $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
299 $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
305 # Make the libraries readable
306 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
307 chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
308 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
309 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
312 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
314 chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
315 cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
317 #TODO: the config file should probably be able to have its
318 # owner set separately from the binaries.
319 chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
320 chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
322 chmod 0440 $(DESTDIR)$(CONFIG_FILE)
323 chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
325 # Make the system binaries
326 cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
328 # Make the system binaries executable also
329 cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
331 # Make the web ui readable by all.
332 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
333 $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
334 $(DESTDIR)$(LOCAL_LEXICON_PATH)
335 chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
336 $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
337 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
338 $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
340 # Make the web ui's data dir writable
341 chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
342 $(DESTDIR)$(MASON_SESSION_PATH)
343 chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
344 $(DESTDIR)$(MASON_SESSION_PATH)
345 chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
346 $(DESTDIR)$(MASON_SESSION_PATH)
351 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
352 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
353 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
354 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
355 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
356 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
357 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
358 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
359 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
360 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
361 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
362 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
365 install: testdeps config-install dirs files-install fixperms instruct
367 files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install
370 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
371 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
372 @COMMENT_INPLACE_LAYOUT@ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
373 @COMMENT_INPLACE_LAYOUT@ @echo "Installed configuration. About to install RT in $(RT_PATH)"
376 $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
378 parallel-test: test-parallel
381 RT_TEST_PARALLEL=1 HARNESS_OPTIONS="j4" $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
383 regression-install: config-install
384 $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)$(CONFIG_FILE)
386 # {{{ database-installation
388 regression-reset-db: force-dropdb
389 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
391 initdb :: initialize-database
394 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
397 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password
400 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force
406 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
407 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type d -print ) | while read dir ; do \
408 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
409 @COMMENT_INPLACE_LAYOUT@ done
410 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type f -print ) | while read file ; do \
411 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
412 @COMMENT_INPLACE_LAYOUT@ done
417 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
418 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type d -print ) | while read dir ; do \
419 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
420 @COMMENT_INPLACE_LAYOUT@ done
421 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type f -print ) | while read file ; do \
422 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
423 @COMMENT_INPLACE_LAYOUT@ done
428 @COMMENT_INPLACE_LAYOUT@ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
429 @COMMENT_INPLACE_LAYOUT@ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
430 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
431 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
437 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
438 @COMMENT_INPLACE_LAYOUT@ for file in $(ETC_FILES) ; do \
439 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
440 @COMMENT_INPLACE_LAYOUT@ done
446 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
447 @COMMENT_INPLACE_LAYOUT@ for file in $(SYSTEM_BINARIES) ; do \
448 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
449 @COMMENT_INPLACE_LAYOUT@ done
456 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
457 @COMMENT_INPLACE_LAYOUT@ for file in $(BINARIES) ; do \
458 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
459 @COMMENT_INPLACE_LAYOUT@ done
463 -( cd local/html && find . -type d -print ) | while read dir ; do \
464 $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
466 -( cd local/html && find . -type f -print ) | while read file ; do \
467 $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
469 -( cd local/po && find . -type d -print ) | while read dir ; do \
470 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
472 -( cd local/po && find . -type f -print ) | while read file ; do \
473 $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
475 -( cd local/etc && find . -type d -print ) | while read dir ; do \
476 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
478 -( cd local/etc && find . -type f -print ) | while read file ; do \
479 $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
483 # {{{ Best Practical Build targets -- no user servicable parts inside
486 $(PERL) sbin/extract-message-catalog
489 $(PERL) sbin/license_tag
491 factory: initialize-database
492 cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
497 chmod 755 ./configure
501 $(PERL) bin/standalone_httpd &
504 $(PERL) sbin/rt-server &
512 SNAPSHOT=$(shell git describe --tags)
514 git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
515 ( cd $(SNAPSHOT) && autoconf && ./configure )
516 tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
517 rm -fr "$(SNAPSHOT)/"