1 # BEGIN BPS TAGGED BLOCK {{{
5 # This software is Copyright (c) 1996-2009 Best Practical Solutions, LLC
6 # <jesse@bestpractical.com>
8 # (Except where explicitly superseded by other copyright notices)
13 # This work is made available to you under the terms of Version 2 of
14 # the GNU General Public License. A copy of that license should have
15 # been provided with this software, but in any event can be snarfed
18 # This work is distributed in the hope that it will be useful, but
19 # WITHOUT ANY WARRANTY; without even the implied warranty of
20 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 # General Public License for more details.
23 # You should have received a copy of the GNU General Public License
24 # along with this program; if not, write to the Free Software
25 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
26 # 02110-1301 or visit their web page on the internet at
27 # http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
30 # CONTRIBUTION SUBMISSION POLICY:
32 # (The following paragraph is not intended to limit the rights granted
33 # to you to modify and distribute this software under the terms of
34 # the GNU General Public License and is only of importance to you if
35 # you choose to contribute your changes and enhancements to the
36 # community by submitting them to Best Practical Solutions, LLC.)
38 # By intentionally submitting any modifications, corrections or
39 # derivatives to this work, or any other work intended for use with
40 # Request Tracker, to Best Practical Solutions, LLC, you confirm that
41 # you are the copyright holder for those contributions and you grant
42 # Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
43 # royalty-free, perpetual, license to use, copy, create derivative
44 # works based on those contributions, and sublicense and distribute
45 # those contributions and any derivatives thereof.
47 # END BPS TAGGED BLOCK }}}
49 # DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
50 # Have a look at "configure" and "Makefile.in" instead
57 RT_LAYOUT = @rt_layout_name@
59 CONFIG_FILE_PATH = @CONFIG_FILE_PATH_R@
60 CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
61 SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
64 RT_VERSION_MAJOR = @RT_VERSION_MAJOR@
65 RT_VERSION_MINOR = @RT_VERSION_MINOR@
66 RT_VERSION_PATCH = @RT_VERSION_PATCH@
68 RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
69 TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
72 # This is the group that all of the installed files will be chgrp'ed to.
76 # User which should own rt binaries.
77 BIN_OWNER = @BIN_OWNER@
79 # User that should own all of RT's libraries, generally root.
80 LIBS_OWNER = @LIBS_OWNER@
82 # Group that should own all of RT's libraries, generally root.
83 LIBS_GROUP = @LIBS_GROUP@
86 WEB_GROUP = @WEB_GROUP@
89 APACHECTL = @APACHECTL@
91 # {{{ Files and directories
93 # DESTDIR allows you to specify that RT be installed somewhere other than
94 # where it will eventually reside. DESTDIR _must_ have a trailing slash
101 RT_PATH = @RT_PATH_R@
102 RT_ETC_PATH = @RT_ETC_PATH_R@
103 RT_BIN_PATH = @RT_BIN_PATH_R@
104 RT_SBIN_PATH = @RT_SBIN_PATH_R@
105 RT_LIB_PATH = @RT_LIB_PATH_R@
106 RT_MAN_PATH = @RT_MAN_PATH_R@
107 RT_VAR_PATH = @RT_VAR_PATH_R@
108 RT_DOC_PATH = @RT_DOC_PATH_R@
109 RT_FONT_PATH = @RT_FONT_PATH_R@
110 RT_LOCAL_PATH = @RT_LOCAL_PATH_R@
111 LOCAL_PLUGIN_PATH = @RT_LOCAL_PATH_R@/plugins
112 LOCAL_ETC_PATH = @LOCAL_ETC_PATH_R@
113 LOCAL_LIB_PATH = @LOCAL_LIB_PATH_R@
114 LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH_R@
115 MASON_HTML_PATH = @MASON_HTML_PATH_R@
116 MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH_R@
117 MASON_DATA_PATH = @MASON_DATA_PATH_R@
118 MASON_SESSION_PATH = @MASON_SESSION_PATH_R@
119 RT_LOG_PATH = @RT_LOG_PATH_R@
121 # RT_READABLE_DIR_MODE is the mode of directories that are generally meant
123 RT_READABLE_DIR_MODE = 0755
128 # {{{ all these define the places that RT's binaries should get installed
130 # RT_MODPERL_HANDLER is the mason handler script for mod_perl
131 RT_MODPERL_HANDLER = webmux.pl
132 # RT_STANDALONE_SERVER is a stand-alone HTTP server
133 RT_STANDALONE_SERVER = standalone_httpd
134 # RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI
135 RT_SPEEDYCGI_HANDLER = mason_handler.scgi
136 # RT_FASTCGI_HANDLER is the mason handler script for FastCGI
137 RT_FASTCGI_HANDLER = mason_handler.fcgi
138 # RT_FASTCGI_SERVER is the FastCGI server
139 RT_FASTCGI_SERVER = fastcgi_server
140 # RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
141 RT_WIN32_FASTCGI_HANDLER = mason_handler.svc
145 RT_MAILGATE_BIN = rt-mailgate
147 RT_CRON_BIN = rt-crontool
152 BINARIES = $(RT_MODPERL_HANDLER) \
156 $(RT_STANDALONE_SERVER) \
157 $(RT_SPEEDYCGI_HANDLER) \
158 $(RT_FASTCGI_HANDLER) \
159 $(RT_FASTCGI_SERVER) \
160 $(RT_WIN32_FASTCGI_HANDLER)
166 SYSTEM_BINARIES = rt-dump-database \
169 rt-email-dashboards \
170 rt-email-group-admin \
172 rt-test-dependencies \
178 ETC_FILES = acl.Informix \
196 WEB_HANDLER = @WEB_HANDLER@
203 # DB_TYPE defines what sort of database RT trys to talk to
204 # "mysql" is known to work.
205 # "Pg" is known to work
206 # "Informix" is known to work
210 # Set DBA to the name of a unix account with the proper permissions and
211 # environment to run your commandline SQL sbin
213 # Set DB_DBA to the name of a DB user with permission to create new databases
215 # For mysql, you probably want 'root'
216 # For Pg, you probably want 'postgres'
217 # For Oracle, you want 'system'
218 # For Informix, you want 'informix'
224 # If you're not running your database server on its default port,
225 # specifiy the port the database server is running on below.
226 # It's generally safe to leave this blank
234 # Set this to the canonical name of the interface RT will be talking to the
235 # database on. If you said that the RT_DB_HOST above was "localhost," this
236 # should be too. This value will be used to grant rt access to the database.
237 # If you want to access the RT database from multiple hosts, you'll need
238 # to grant those database rights by hand.
241 DB_RT_HOST = @DB_RT_HOST@
243 # set this to the name you want to give to the RT database in
244 # your database server. For Oracle, this should be the name of your sid
246 DB_DATABASE = @DB_DATABASE@
247 DB_RT_USER = @DB_RT_USER@
248 DB_RT_PASS = @DB_RT_PASS@
253 TEST_FILES = t/*.t t/*/*.t
257 ####################################################################
262 @echo "Please read RT's README before beginning your installation."
267 @echo "Congratulations. RT is now installed."
270 @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
272 @echo "(You will definitely need to set RT's database password in "
273 @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
274 @echo "very dangerous. Note that you do not have to manually add a "
275 @echo "database user or set up a database for RT. These actions will be "
276 @echo "taken care of in the next step.)"
278 @echo "After that, you need to initialize RT's database by running"
279 @echo " 'make initialize-database'"
283 @echo "Congratulations. RT has been upgraded. You should now check over"
284 @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
285 @echo "you should update RT's system database objects by running "
286 @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action upgrade"
289 upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
291 upgrade-noclobber: config-install dirs libs-install html-install bin-install local-install doc-install font-install fixperms
296 my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
298 $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
303 $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
309 # Make the libraries readable
310 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
311 chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
312 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
313 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
316 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
318 chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
319 cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
321 #TODO: the config file should probably be able to have its
322 # owner set separately from the binaries.
323 chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
324 chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
326 chmod 0440 $(DESTDIR)$(CONFIG_FILE)
327 chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
329 # Make the system binaries
330 cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
332 # Make the system binaries executable also
333 cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
335 # Make the web ui readable by all.
336 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
337 $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
338 $(DESTDIR)$(LOCAL_LEXICON_PATH)
339 chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
340 $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
341 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
342 $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
344 # Make the web ui's data dir writable
345 chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
346 $(DESTDIR)$(MASON_SESSION_PATH)
347 chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
348 $(DESTDIR)$(MASON_SESSION_PATH)
349 chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
350 $(DESTDIR)$(MASON_SESSION_PATH)
355 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
356 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
357 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
358 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
359 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
360 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
361 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
362 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
363 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
364 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
365 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
366 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
367 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
370 install: testdeps config-install dirs files-install fixperms instruct
372 files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install font-install
375 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
376 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
377 @COMMENT_INPLACE_LAYOUT@ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
378 @COMMENT_INPLACE_LAYOUT@ @echo "Installed configuration. About to install RT in $(RT_PATH)"
381 $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
383 parallel-test: test-parallel
386 RT_TEST_PARALLEL=1 HARNESS_OPTIONS="j4" $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
388 regression-install: config-install
389 $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)$(CONFIG_FILE)
391 # {{{ database-installation
393 regression-reset-db: force-dropdb
394 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
396 initdb :: initialize-database
399 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
402 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password
405 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force
411 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
412 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type d -print ) | while read dir ; do \
413 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
414 @COMMENT_INPLACE_LAYOUT@ done
415 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type f -print ) | while read file ; do \
416 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
417 @COMMENT_INPLACE_LAYOUT@ done
422 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
423 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type d -print ) | while read dir ; do \
424 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
425 @COMMENT_INPLACE_LAYOUT@ done
426 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type f -print ) | while read file ; do \
427 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
428 @COMMENT_INPLACE_LAYOUT@ done
433 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
434 @COMMENT_INPLACE_LAYOUT@ -( cd share/fonts && find . -type f -print ) | while read file ; do \
435 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
436 @COMMENT_INPLACE_LAYOUT@ done
441 @COMMENT_INPLACE_LAYOUT@ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
442 @COMMENT_INPLACE_LAYOUT@ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
443 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
444 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
450 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
451 @COMMENT_INPLACE_LAYOUT@ for file in $(ETC_FILES) ; do \
452 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
453 @COMMENT_INPLACE_LAYOUT@ done
459 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
460 @COMMENT_INPLACE_LAYOUT@ for file in $(SYSTEM_BINARIES) ; do \
461 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
462 @COMMENT_INPLACE_LAYOUT@ done
469 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
470 @COMMENT_INPLACE_LAYOUT@ for file in $(BINARIES) ; do \
471 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
472 @COMMENT_INPLACE_LAYOUT@ done
476 -( cd local/html && find . -type d -print ) | while read dir ; do \
477 $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
479 -( cd local/html && find . -type f -print ) | while read file ; do \
480 $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
482 -( cd local/po && find . -type d -print ) | while read dir ; do \
483 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
485 -( cd local/po && find . -type f -print ) | while read file ; do \
486 $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
488 -( cd local/etc && find . -type d -print ) | while read dir ; do \
489 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
491 -( cd local/etc && find . -type f -print ) | while read file ; do \
492 $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
496 # {{{ Best Practical Build targets -- no user servicable parts inside
499 $(PERL) sbin/extract-message-catalog
502 $(PERL) sbin/license_tag
504 factory: initialize-database
505 cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
510 chmod 755 ./configure
514 $(PERL) bin/standalone_httpd &
517 $(PERL) sbin/rt-server &
525 SNAPSHOT=$(shell git describe --tags)
527 git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
528 ( cd $(SNAPSHOT) && autoconf && ./configure )
529 tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
530 rm -fr "$(SNAPSHOT)/"