4 use vars qw( @ISA @EXPORT_OK $DEBUG $me
5 $conf $cdr_prerate %cdr_prerate_cdrtypenums
8 use List::Util qw(first min);
13 use List::Util qw( first min );
15 use FS::UID qw( dbh );
17 use FS::Record qw( qsearch qsearchs );
22 use FS::cdr_termination;
27 @ISA = qw(FS::Record);
28 @EXPORT_OK = qw( _cdr_date_parser_maker _cdr_min_parser_maker );
33 #ask FS::UID to run this stuff for us later
34 FS::UID->install_callback( sub {
37 my @cdr_prerate_cdrtypenums;
38 $cdr_prerate = $conf->exists('cdr-prerate');
39 @cdr_prerate_cdrtypenums = $conf->config('cdr-prerate-cdrtypenums')
41 %cdr_prerate_cdrtypenums = map { $_=>1 } @cdr_prerate_cdrtypenums;
46 FS::cdr - Object methods for cdr records
52 $record = new FS::cdr \%hash;
53 $record = new FS::cdr { 'column' => 'value' };
55 $error = $record->insert;
57 $error = $new_record->replace($old_record);
59 $error = $record->delete;
61 $error = $record->check;
65 An FS::cdr object represents an Call Data Record, typically from a telephony
66 system or provider of some sort. FS::cdr inherits from FS::Record. The
67 following fields are currently supported:
71 =item acctid - primary key
73 =item calldate - Call timestamp (SQL timestamp)
75 =item clid - Caller*ID with text
77 =item src - Caller*ID number / Source number
79 =item dst - Destination extension
81 =item dcontext - Destination context
83 =item channel - Channel used
85 =item dstchannel - Destination channel if appropriate
87 =item lastapp - Last application if appropriate
89 =item lastdata - Last application data
91 =item src_ip_addr - Source IP address (dotted quad, zero-filled)
93 =item dst_ip_addr - Destination IP address (same)
95 =item dst_term - Terminating destination number (if different from dst)
97 =item startdate - Start of call (UNIX-style integer timestamp)
99 =item answerdate - Answer time of call (UNIX-style integer timestamp)
101 =item enddate - End time of call (UNIX-style integer timestamp)
103 =item duration - Total time in system, in seconds
105 =item billsec - Total time call is up, in seconds
107 =item disposition - What happened to the call: ANSWERED, NO ANSWER, BUSY
109 =item amaflags - What flags to use: BILL, IGNORE etc, specified on a per channel basis like accountcode.
113 #ignore the "omit" and "documentation" AMAs??
114 #AMA = Automated Message Accounting.
115 #default: Sets the system default.
116 #omit: Do not record calls.
117 #billing: Mark the entry for billing
118 #documentation: Mark the entry for documentation.
120 =item accountcode - CDR account number to use: account
122 =item uniqueid - Unique channel identifier (Unitel/RSLCOM Event ID)
124 =item userfield - CDR user-defined field
126 =item cdr_type - CDR type - see L<FS::cdr_type> (Usage = 1, S&E = 7, OC&C = 8)
128 =item charged_party - Service number to be billed
130 =item upstream_currency - Wholesale currency from upstream
132 =item upstream_price - Wholesale price from upstream
134 =item upstream_rateplanid - Upstream rate plan ID
136 =item rated_price - Rated (or re-rated) price
138 =item distance - km (need units field?)
140 =item islocal - Local - 1, Non Local = 0
142 =item calltypenum - Type of call - see L<FS::cdr_calltype>
144 =item description - Description (cdr_type 7&8 only) (used for cust_bill_pkg.itemdesc)
146 =item quantity - Number of items (cdr_type 7&8 only)
148 =item carrierid - Upstream Carrier ID (see L<FS::cdr_carrier>)
152 #Telstra =1, Optus = 2, RSL COM = 3
154 =item upstream_rateid - Upstream Rate ID
156 =item svcnum - Link to customer service (see L<FS::cust_svc>)
158 =item freesidestatus - NULL, processing-tiered, rated, done, skipped, no-charge, failed
160 =item freesiderewritestatus - NULL, done, skipped
164 =item detailnum - Link to invoice detail (L<FS::cust_bill_pkg_detail>)
174 Creates a new CDR. To add the CDR to the database, see L<"insert">.
176 Note that this stores the hash reference, not a distinct copy of the hash it
177 points to. You can ask the object for a copy with the I<hash> method.
181 # the new method can be inherited from FS::Record, if a table method is defined
188 #XXX fill in some (more) nice names
190 'calldate' => 'Call date',
191 'clid' => 'Caller ID',
193 'dst' => 'Destination',
194 'dcontext' => 'Dest. context',
195 'channel' => 'Channel',
196 'dstchannel' => 'Destination channel',
199 'src_ip_addr' => 'Source IP',
200 'dst_ip_addr' => 'Dest. IP',
201 'dst_term' => 'Termination dest.',
202 'startdate' => 'Start date',
203 'answerdate' => 'Answer date',
204 'enddate' => 'End date',
205 'duration' => 'Duration',
206 'billsec' => 'Billable seconds',
207 'disposition' => 'Disposition',
208 'amaflags' => 'AMA flags',
209 'accountcode' => 'Account code',
211 'userfield' => 'User field',
213 'charged_party' => 'Charged party',
214 #'upstream_currency' => '',
215 'upstream_price' => 'Upstream price',
216 #'upstream_rateplanid' => '',
217 #'ratedetailnum' => '',
218 'rated_price' => 'Rated price',
219 'rated_cost' => 'Rated cost',
222 #'calltypenum' => '',
223 #'description' => '',
225 'carrierid' => 'Carrier ID',
226 #'upstream_rateid' => '',
227 'svcnum' => 'Freeside service',
228 'freesidestatus' => 'Freeside status',
229 'freesiderewritestatus' => 'Freeside rewrite status',
230 'cdrbatch' => 'Legacy batch',
231 'cdrbatchnum' => 'Batch',
232 'detailnum' => 'Freeside invoice detail line',
241 Adds this record to the database. If there is an error, returns the error,
242 otherwise returns false.
246 # the insert method can be inherited from FS::Record
250 Delete this record from the database.
254 # the delete method can be inherited from FS::Record
256 =item replace OLD_RECORD
258 Replaces the OLD_RECORD with this one in the database. If there is an error,
259 returns the error, otherwise returns false.
263 # the replace method can be inherited from FS::Record
267 Checks all fields to make sure this is a valid CDR. If there is
268 an error, returns the error, otherwise returns false. Called by the insert
271 Note: Unlike most types of records, we don't want to "reject" a CDR and we want
272 to process them as quickly as possible, so we allow the database to check most
280 # we don't want to "reject" a CDR like other sorts of input...
282 # $self->ut_numbern('acctid')
283 ## || $self->ut_('calldate')
284 # || $self->ut_text('clid')
285 # || $self->ut_text('src')
286 # || $self->ut_text('dst')
287 # || $self->ut_text('dcontext')
288 # || $self->ut_text('channel')
289 # || $self->ut_text('dstchannel')
290 # || $self->ut_text('lastapp')
291 # || $self->ut_text('lastdata')
292 # || $self->ut_numbern('startdate')
293 # || $self->ut_numbern('answerdate')
294 # || $self->ut_numbern('enddate')
295 # || $self->ut_number('duration')
296 # || $self->ut_number('billsec')
297 # || $self->ut_text('disposition')
298 # || $self->ut_number('amaflags')
299 # || $self->ut_text('accountcode')
300 # || $self->ut_text('uniqueid')
301 # || $self->ut_text('userfield')
302 # || $self->ut_numbern('cdrtypenum')
303 # || $self->ut_textn('charged_party')
304 ## || $self->ut_n('upstream_currency')
305 ## || $self->ut_n('upstream_price')
306 # || $self->ut_numbern('upstream_rateplanid')
307 ## || $self->ut_n('distance')
308 # || $self->ut_numbern('islocal')
309 # || $self->ut_numbern('calltypenum')
310 # || $self->ut_textn('description')
311 # || $self->ut_numbern('quantity')
312 # || $self->ut_numbern('carrierid')
313 # || $self->ut_numbern('upstream_rateid')
314 # || $self->ut_numbern('svcnum')
315 # || $self->ut_textn('freesidestatus')
316 # || $self->ut_textn('freesiderewritestatus')
318 # return $error if $error;
320 for my $f ( grep { $self->$_ =~ /\D/ } qw(startdate answerdate enddate)){
321 $self->$f( str2time($self->$f) );
324 $self->calldate( $self->startdate_sql )
325 if !$self->calldate && $self->startdate;
327 #was just for $format eq 'taqua' but can't see the harm... add something to
328 #disable if it becomes a problem
329 if ( $self->duration eq '' && $self->enddate && $self->startdate ) {
330 $self->duration( $self->enddate - $self->startdate );
332 if ( $self->billsec eq '' && $self->enddate && $self->answerdate ) {
333 $self->billsec( $self->enddate - $self->answerdate );
336 if ( ! $self->enddate && $self->startdate && $self->duration ) {
337 $self->enddate( $self->startdate + $self->duration );
340 $self->set_charged_party;
342 #check the foreign keys even?
343 #do we want to outright *reject* the CDR?
344 my $error = $self->ut_numbern('acctid');
345 return $error if $error;
347 if ( $self->freesidestatus ne 'done' ) {
348 $self->set('detailnum', ''); # can't have this on an unbilled call
351 #add a config option to turn these back on if someone needs 'em
353 # #Usage = 1, S&E = 7, OC&C = 8
354 # || $self->ut_foreign_keyn('cdrtypenum', 'cdr_type', 'cdrtypenum' )
356 # #the big list in appendix 2
357 # || $self->ut_foreign_keyn('calltypenum', 'cdr_calltype', 'calltypenum' )
359 # # Telstra =1, Optus = 2, RSL COM = 3
360 # || $self->ut_foreign_keyn('carrierid', 'cdr_carrier', 'carrierid' )
365 =item is_tollfree [ COLUMN ]
367 Returns true when the cdr represents a toll free number and false otherwise.
369 By default, inspects the dst field, but an optional column name can be passed
370 to inspect other field.
376 my $field = scalar(@_) ? shift : 'dst';
377 my $country = $conf->config('tollfree-country') || '';
378 if ( $country eq 'AU' ) {
379 ( $self->$field() =~ /^(\+?61)?(1800|1300)/ ) ? 1 : 0;
380 } elsif ( $country eq 'NZ' ) {
381 ( $self->$field() =~ /^(\+?64)?(800|508)/ ) ? 1 : 0;
382 } else { #NANPA (US/Canaada)
383 ( $self->$field() =~ /^(\+?1)?8(8|([02-7])\3)/ ) ? 1 : 0;
387 =item set_charged_party
389 If the charged_party field is already set, does nothing. Otherwise:
391 If the cdr-charged_party-accountcode config option is enabled, sets the
392 charged_party to the accountcode.
394 Otherwise sets the charged_party normally: to the src field in most cases,
395 or to the dst field if it is a toll free number.
399 sub set_charged_party {
402 my $conf = new FS::Conf;
404 unless ( $self->charged_party ) {
406 if ( $conf->exists('cdr-charged_party-accountcode') && $self->accountcode ){
408 my $charged_party = $self->accountcode;
409 $charged_party =~ s/^0+//
410 if $conf->exists('cdr-charged_party-accountcode-trim_leading_0s');
411 $self->charged_party( $charged_party );
413 } elsif ( $conf->exists('cdr-charged_party-field') ) {
415 my $field = $conf->config('cdr-charged_party-field');
416 $self->charged_party( $self->$field() );
420 if ( $self->is_tollfree ) {
421 $self->charged_party($self->dst);
423 $self->charged_party($self->src);
430 # my $prefix = $conf->config('cdr-charged_party-truncate_prefix');
431 # my $prefix_len = length($prefix);
432 # my $trunc_len = $conf->config('cdr-charged_party-truncate_length');
434 # $self->charged_party( substr($self->charged_party, 0, $trunc_len) )
435 # if $prefix_len && $trunc_len
436 # && substr($self->charged_party, 0, $prefix_len) eq $prefix;
440 =item set_status STATUS
442 Sets the status to the provided string. If there is an error, returns the
443 error, otherwise returns false.
445 If status is being changed from 'rated' to some other status, also removes
446 any usage allocations to this CDR.
451 my($self, $status) = @_;
452 my $old_status = $self->freesidestatus;
453 $self->freesidestatus($status);
454 my $error = $self->replace;
455 if ( $old_status eq 'rated' and $status ne 'done' ) {
456 # deallocate any usage
457 foreach (qsearch('cdr_cust_pkg_usage', {acctid => $self->acctid})) {
458 my $cust_pkg_usage = $_->cust_pkg_usage;
459 $cust_pkg_usage->set('minutes', $cust_pkg_usage->minutes + $_->minutes);
460 $error ||= $cust_pkg_usage->replace || $_->delete;
466 =item set_status_and_rated_price STATUS RATED_PRICE [ SVCNUM [ OPTION => VALUE ... ] ]
468 Sets the status and rated price.
470 Available options are: inbound, rated_pretty_dst, rated_regionname,
471 rated_seconds, rated_minutes, rated_granularity, rated_ratedetailnum,
472 rated_classnum, rated_ratename. If rated_ratedetailnum is provided,
473 will also set a recalculated L</rate_cost> in the rated_cost field
474 after the other fields are set (does not work with inbound.)
476 If there is an error, returns the error, otherwise returns false.
480 sub set_status_and_rated_price {
481 my($self, $status, $rated_price, $svcnum, %opt) = @_;
483 if ($opt{'inbound'}) {
485 my $term = $self->cdr_termination( 1 ); #1: inbound
488 warn "replacing existing cdr status (".$self->acctid.")\n" if $term;
489 $error = $term->delete;
490 return $error if $error;
492 $term = FS::cdr_termination->new({
493 acctid => $self->acctid,
495 rated_price => $rated_price,
498 $term->rated_seconds($opt{rated_seconds}) if exists($opt{rated_seconds});
499 $term->rated_minutes($opt{rated_minutes}) if exists($opt{rated_minutes});
500 $term->svcnum($svcnum) if $svcnum;
501 return $term->insert;
505 $self->freesidestatus($status);
506 $self->rated_price($rated_price);
508 foreach grep exists($opt{$_}), map "rated_$_",
509 qw( pretty_dst regionname seconds minutes granularity
510 ratedetailnum classnum ratename );
511 $self->svcnum($svcnum) if $svcnum;
512 $self->rated_cost($self->rate_cost) if $opt{'rated_ratedetailnum'};
514 return $self->replace();
519 =item parse_number [ OPTION => VALUE ... ]
521 Returns two scalars, the countrycode and the rest of the number.
523 Options are passed as name-value pairs. Currently available options are:
529 The column containing the number to be parsed. Defaults to dst.
531 =item international_prefix
533 The digits for international dialing. Defaults to '011' The value '+' is
536 =item domestic_prefix
538 The digits for domestic long distance dialing. Defaults to '1'
545 my ($self, %options) = @_;
547 my $field = $options{column} || 'dst';
548 my $intl = $options{international_prefix} || '011';
549 # Still, don't break anyone's CDR rating if they have an empty string in
550 # there. Require an explicit statement that there's no prefix.
551 $intl = '' if lc($intl) eq 'none';
552 my $countrycode = '';
553 my $number = $self->$field();
555 my $to_or_from = 'concerning';
556 $to_or_from = 'from' if $field eq 'src';
557 $to_or_from = 'to' if $field eq 'dst';
558 warn "parsing call $to_or_from $number\n" if $DEBUG;
560 #remove non-phone# stuff and whitespace
563 # $dest =~ s/^(\w+):// and $proto = $1; #sip:
565 # $dest =~ s/\@(.*)$// and $siphost = $1; # @10.54.32.1, @sip.example.com
567 if ( $number =~ /^$intl(((\d)(\d))(\d))(\d+)$/
568 || $number =~ /^\+(((\d)(\d))(\d))(\d+)$/
572 my( $three, $two, $one, $u1, $u2, $rest ) = ( $1,$2,$3,$4,$5,$6 );
573 #first look for 1 digit country code
574 if ( qsearch('rate_prefix', { 'countrycode' => $one } ) ) {
576 $number = $u1.$u2.$rest;
577 } elsif ( qsearch('rate_prefix', { 'countrycode' => $two } ) ) { #or 2
580 } else { #3 digit country code
581 $countrycode = $three;
586 my $domestic_prefix =
587 exists($options{domestic_prefix}) ? $options{domestic_prefix} : '';
588 $countrycode = length($domestic_prefix) ? $domestic_prefix : '1';
589 $number =~ s/^$countrycode//;# if length($number) > 10;
592 return($countrycode, $number);
596 =item rate [ OPTION => VALUE ... ]
598 Rates this CDR according and sets the status to 'rated'.
600 Available options are: part_pkg, svcnum, plan_included_min,
601 detail_included_min_hashref.
603 part_pkg is required.
605 If svcnum is specified, will also associate this CDR with the specified svcnum.
607 plan_included_min should be set to a scalar reference of the number of
608 included minutes and will be decremented by the rated minutes of this
611 detail_included_min_hashref should be set to an empty hashref at the
612 start of a month's rating and then preserved across CDRs.
617 my( $self, %opt ) = @_;
618 my $part_pkg = $opt{'part_pkg'} or return "No part_pkg specified";
621 warn "rating CDR $self\n".
622 join('', map { " $_ => ". $self->{$_}. "\n" } keys %$self );
625 my $rating_method = $part_pkg->option_cacheable('rating_method') || 'prefix';
626 my $method = "rate_$rating_method";
627 $self->$method(%opt);
631 our %interval_cache = (); # for timed rates
634 my( $self, %opt ) = @_;
635 my $part_pkg = $opt{'part_pkg'} or return "No part_pkg specified";
636 my $cust_pkg = $opt{'cust_pkg'};
639 # this will result in those CDRs being marked as done... is that
642 if ( $part_pkg->option_cacheable('411_rewrite') ) {
643 my $dirass = $part_pkg->option_cacheable('411_rewrite');
645 @dirass = split(',', $dirass);
648 if ( length($self->dst) && grep { $self->dst eq $_ } @dirass ) {
653 my $reason = $part_pkg->check_chargable( $self,
654 'da_rewrote' => $da_rewrote,
657 warn "not charging for CDR ($reason)\n" if $DEBUG;
658 return $self->set_status_and_rated_price( 'skipped',
664 if ( $part_pkg->option_cacheable('skip_same_customer')
665 and ! $self->is_tollfree ) {
666 my ($dst_countrycode, $dst_number) = $self->parse_number(
668 international_prefix => $part_pkg->option_cacheable('international_prefix'),
669 domestic_prefix => $part_pkg->option_cacheable('domestic_prefix'),
671 my $dst_same_cust = FS::Record->scalar_sql(
672 'SELECT COUNT(svc_phone.svcnum) AS count '.
674 'JOIN cust_svc USING (pkgnum) ' .
675 'JOIN svc_phone USING (svcnum) ' .
676 'WHERE svc_phone.countrycode = ' . dbh->quote($dst_countrycode) .
677 ' AND svc_phone.phonenum = ' . dbh->quote($dst_number) .
678 ' AND cust_pkg.custnum = ' . $cust_pkg->custnum,
680 if ( $dst_same_cust > 0 ) {
681 warn "not charging for CDR (same source and destination customer)\n" if $DEBUG;
682 return $self->set_status_and_rated_price( 'skipped',
693 # look up rate details based on called station id
694 # (or calling station id for toll free calls)
697 my $eff_ratenum = $self->is_tollfree('accountcode')
698 ? $part_pkg->option_cacheable('accountcode_tollfree_ratenum')
701 my( $to_or_from, $column );
704 && ! $part_pkg->option_cacheable('disable_tollfree')
707 && $part_pkg->option_cacheable('accountcode_tollfree_field') eq 'src'
711 $to_or_from = 'from';
713 } else { #regular call
718 #determine the country code
719 my ($countrycode, $number) = $self->parse_number(
721 international_prefix => $part_pkg->option_cacheable('international_prefix'),
722 domestic_prefix => $part_pkg->option_cacheable('domestic_prefix'),
725 warn "rating call $to_or_from +$countrycode $number\n" if $DEBUG;
726 my $pretty_dst = "+$countrycode $number";
727 #asterisks here causes inserting the detail to barf, so:
728 $pretty_dst =~ s/\*//g;
731 my $intrastate_ratenum = $part_pkg->option_cacheable('intrastate_ratenum');
732 if ( $intrastate_ratenum && !$self->is_tollfree ) {
733 $ratename = 'Interstate'; #until proven otherwise
734 # this is relatively easy only because:
735 # -assume all numbers are valid NANP numbers NOT in a fully-qualified format
736 # -disregard toll-free
737 # -disregard private or unknown numbers
738 # -there is exactly one record in rate_prefix for a given NPANXX
739 # -default to interstate if we can't find one or both of the prefixes
740 my (undef, $dstprefix) = $self->parse_number(
742 international_prefix => $part_pkg->option_cacheable('international_prefix'),
743 domestic_prefix => $part_pkg->option_cacheable('domestic_prefix'),
745 $dstprefix =~ /^(\d{6})/;
746 $dstprefix = qsearchs('rate_prefix', { 'countrycode' => '1',
749 my (undef, $srcprefix) = $self->parse_number(
751 international_prefix => $part_pkg->option_cacheable('international_prefix'),
752 domestic_prefix => $part_pkg->option_cacheable('domestic_prefix'),
754 $srcprefix =~ /^(\d{6})/;
755 $srcprefix = qsearchs('rate_prefix', { 'countrycode' => '1',
758 if ($srcprefix && $dstprefix
759 && $srcprefix->state && $dstprefix->state
760 && $srcprefix->state eq $dstprefix->state) {
761 $eff_ratenum = $intrastate_ratenum;
762 $ratename = 'Intrastate'; # XXX possibly just use the ratename?
766 $eff_ratenum ||= $part_pkg->option_cacheable('ratenum');
767 my $rate = qsearchs('rate', { 'ratenum' => $eff_ratenum })
768 or die "ratenum $eff_ratenum not found!";
770 my @ltime = localtime($self->startdate);
771 my $weektime = $ltime[0] +
772 $ltime[1]*60 + #minutes
773 $ltime[2]*3600 + #hours
774 $ltime[6]*86400; #days since sunday
775 # if there's no timed rate_detail for this time/region combination,
776 # dest_detail returns the default. There may still be a timed rate
777 # that applies after the starttime of the call, so be careful...
778 my $rate_detail = $rate->dest_detail({ 'countrycode' => $countrycode,
779 'phonenum' => $number,
780 'weektime' => $weektime,
781 'cdrtypenum' => $self->cdrtypenum,
784 unless ( $rate_detail ) {
786 if ( $part_pkg->option_cacheable('ignore_unrateable') ) {
788 if ( $part_pkg->option_cacheable('ignore_unrateable') == 2 ) {
789 # mark the CDR as unrateable
790 return $self->set_status_and_rated_price(
795 } elsif ( $part_pkg->option_cacheable('ignore_unrateable') == 1 ) {
797 warn "no rate_detail found for CDR.acctid: ". $self->acctid.
802 die "unknown ignore_unrateable, pkgpart ". $part_pkg->pkgpart;
807 die "FATAL: no rate_detail found in ".
808 $rate->ratenum. ":". $rate->ratename. " rate plan ".
809 "for +$countrycode $number (CDR acctid ". $self->acctid. "); ".
810 "add a rate or set ignore_unrateable flag on the package def\n";
815 my $regionnum = $rate_detail->dest_regionnum;
816 my $rate_region = $rate_detail->dest_region;
817 warn " found rate for regionnum $regionnum ".
818 "and rate detail $rate_detail\n"
821 if ( !exists($interval_cache{$regionnum}) ) {
823 sort { $a->stime <=> $b->stime }
824 map { $_->rate_time->intervals }
825 qsearch({ 'table' => 'rate_detail',
826 'hashref' => { 'ratenum' => $rate->ratenum },
827 'extra_sql' => 'AND ratetimenum IS NOT NULL',
830 $interval_cache{$regionnum} = \@intervals;
831 warn " cached ".scalar(@intervals)." interval(s)\n"
836 # find the price and add detail to the invoice
839 # About this section:
840 # We don't round _anything_ (except granularizing)
841 # until the final $charge = sprintf("%.2f"...).
843 my $rated_seconds = $part_pkg->option_cacheable('use_duration')
846 my $seconds_left = $rated_seconds;
848 #no, do this later so it respects (group) included minutes
849 # # charge for the first (conn_sec) seconds
850 # my $seconds = min($seconds_left, $rate_detail->conn_sec);
851 # $seconds_left -= $seconds;
852 # $weektime += $seconds;
853 # my $charge = $rate_detail->conn_charge;
856 my $connection_charged = 0;
858 # before doing anything else, if there's an upstream multiplier and
859 # an upstream price, add that to the charge. (usually the rate detail
860 # will then have a minute charge of zero, but not necessarily.)
861 $charge += ($self->upstream_price || 0) * $rate_detail->upstream_mult_charge;
864 while($seconds_left) {
865 my $ratetimenum = $rate_detail->ratetimenum; # may be empty
867 # find the end of the current rate interval
868 if(@{ $interval_cache{$regionnum} } == 0) {
869 # There are no timed rates in this group, so just stay
870 # in the default rate_detail for the entire duration.
871 # Set an "end" of 1 past the end of the current call.
872 $etime = $weektime + $seconds_left + 1;
874 elsif($ratetimenum) {
875 # This is a timed rate, so go to the etime of this interval.
876 # If it's followed by another timed rate, the stime of that
877 # interval should match the etime of this one.
878 my $interval = $rate_detail->rate_time->contains($weektime);
879 $etime = $interval->etime;
882 # This is a default rate, so use the stime of the next
883 # interval in the sequence.
884 my $next_int = first { $_->stime > $weektime }
885 @{ $interval_cache{$regionnum} };
887 $etime = $next_int->stime;
890 # weektime is near the end of the week, so decrement
891 # it by a full week and use the stime of the first
893 $weektime -= (3600*24*7);
894 $etime = $interval_cache{$regionnum}->[0]->stime;
898 my $charge_sec = min($seconds_left, $etime - $weektime);
900 $seconds_left -= $charge_sec;
902 my $granularity = $rate_detail->sec_granularity;
905 if ( $granularity ) { # charge per minute
906 # Round up to the nearest $granularity
907 if ( $charge_sec and $charge_sec % $granularity ) {
908 $charge_sec += $granularity - ($charge_sec % $granularity);
910 $minutes = $charge_sec / 60; #don't round this
917 #$seconds += $charge_sec;
919 if ( $rate_detail->min_included ) {
920 # the old, kind of deprecated way to do this:
922 # The rate detail itself has included minutes. We MUST have a place
924 my $included_min = $opt{'detail_included_min_hashref'}
925 or return "unable to rate CDR: rate detail has included minutes, but ".
926 "no detail_included_min_hashref provided.\n";
928 # by default, set the included minutes for this region/time to
929 # what's in the rate_detail
930 $included_min->{$regionnum}{$ratetimenum} = $rate_detail->min_included
931 unless exists $included_min->{$regionnum}{$ratetimenum};
933 if ( $included_min->{$regionnum}{$ratetimenum} >= $minutes ) {
935 $included_min->{$regionnum}{$ratetimenum} -= $minutes;
937 $charge_sec -= ($included_min->{$regionnum}{$ratetimenum} * 60);
938 $included_min->{$regionnum}{$ratetimenum} = 0;
940 } elsif ( $opt{plan_included_min} && ${ $opt{plan_included_min} } > 0 ) {
941 # The package definition has included minutes, but only for in-group
942 # rate details. Decrement them if this is an in-group call.
943 if ( $rate_detail->region_group ) {
944 if ( ${ $opt{'plan_included_min'} } >= $minutes ) {
946 ${ $opt{'plan_included_min'} } -= $minutes;
948 $charge_sec -= (${ $opt{'plan_included_min'} } * 60);
949 ${ $opt{'plan_included_min'} } = 0;
954 my $applied_min = $cust_pkg->apply_usage(
956 'rate_detail' => $rate_detail,
957 'minutes' => $minutes
959 # for now, usage pools deal only in whole minutes
960 $charge_sec -= $applied_min * 60;
963 if ( $charge_sec > 0 ) {
965 #NOW do connection charges here... right?
966 #my $conn_seconds = min($seconds_left, $rate_detail->conn_sec);
967 my $conn_seconds = 0;
968 unless ( $connection_charged++ ) { #only one connection charge
969 $conn_seconds = min($charge_sec, $rate_detail->conn_sec);
970 $seconds_left -= $conn_seconds;
971 $weektime += $conn_seconds;
972 $charge += $rate_detail->conn_charge;
975 #should preserve (display?) this
976 if ( $granularity == 0 ) { # per call rate
977 $charge += $rate_detail->min_charge;
979 my $charge_min = ( $charge_sec - $conn_seconds ) / 60;
980 $charge += ($rate_detail->min_charge * $charge_min) if $charge_min > 0; #still not rounded
985 # choose next rate_detail
986 $rate_detail = $rate->dest_detail({ 'countrycode' => $countrycode,
987 'phonenum' => $number,
988 'weektime' => $etime,
989 'cdrtypenum' => $self->cdrtypenum })
991 # we have now moved forward to $etime
994 } #while $seconds_left
996 # this is why we need regionnum/rate_region....
997 warn " (rate region $rate_region)\n" if $DEBUG;
1000 my $rounding = $part_pkg->option_cacheable('rounding') || 2;
1001 my $sprintformat = '%.'. $rounding. 'f';
1002 my $roundup = 10**(-3-$rounding);
1003 my $price = sprintf($sprintformat, $charge + $roundup);
1005 $self->set_status_and_rated_price(
1009 'rated_pretty_dst' => $pretty_dst,
1010 'rated_regionname' => ($rate_region ? $rate_region->regionname : ''),
1011 'rated_seconds' => $rated_seconds, #$seconds,
1012 'rated_granularity' => $rate_detail->sec_granularity, #$granularity
1013 'rated_ratedetailnum' => $rate_detail->ratedetailnum,
1014 'rated_classnum' => $rate_detail->classnum, #rated_ratedetailnum?
1015 'rated_ratename' => $ratename, #not rate_detail - Intrastate/Interstate
1020 sub rate_upstream_simple {
1021 my( $self, %opt ) = @_;
1023 $self->set_status_and_rated_price(
1025 sprintf('%.3f', $self->upstream_price),
1027 'rated_classnum' => $self->calltypenum,
1028 'rated_seconds' => $self->billsec,
1029 # others? upstream_*_regionname => rated_regionname is possible
1033 sub rate_single_price {
1034 my( $self, %opt ) = @_;
1035 my $part_pkg = $opt{'part_pkg'} or return "No part_pkg specified";
1037 # a little false laziness w/abov
1038 # $rate_detail = new FS::rate_detail({sec_granularity => ... }) ?
1040 my $granularity = length($part_pkg->option_cacheable('sec_granularity'))
1041 ? $part_pkg->option_cacheable('sec_granularity')
1044 my $seconds = $part_pkg->option_cacheable('use_duration')
1048 $seconds += $granularity - ( $seconds % $granularity )
1049 if $seconds # don't granular-ize 0 billsec calls (bills them)
1050 && $granularity # 0 is per call
1051 && $seconds % $granularity;
1052 my $minutes = $granularity ? ($seconds / 60) : 1;
1054 my $charge_min = $minutes;
1056 ${$opt{plan_included_min}} -= $minutes;
1057 if ( ${$opt{plan_included_min}} > 0 ) {
1060 $charge_min = 0 - ${$opt{plan_included_min}};
1061 ${$opt{plan_included_min}} = 0;
1065 sprintf('%.4f', ( $part_pkg->option_cacheable('min_charge') * $charge_min )
1066 + 0.0000000001 ); #so 1.00005 rounds to 1.0001
1068 $self->set_status_and_rated_price(
1072 'rated_granularity' => $granularity,
1073 'rated_seconds' => $seconds,
1080 Rates an already-rated CDR according to the cost fields from the rate plan.
1089 return 0 unless $self->rated_ratedetailnum;
1092 qsearchs('rate_detail', { 'ratedetailnum' => $self->rated_ratedetailnum } );
1095 $charge += ($self->upstream_price || 0) * ($rate_detail->upstream_mult_cost);
1097 if ( $self->rated_granularity == 0 ) {
1098 $charge += $rate_detail->min_cost;
1100 my $minutes = $self->rated_seconds / 60;
1101 $charge += $rate_detail->conn_cost + $minutes * $rate_detail->min_cost;
1104 sprintf('%.2f', $charge + .00001 );
1108 =item cdr_termination [ TERMPART ]
1112 sub cdr_termination {
1115 if ( scalar(@_) && $_[0] ) {
1116 my $termpart = shift;
1118 qsearchs('cdr_termination', { acctid => $self->acctid,
1119 termpart => $termpart,
1125 qsearch('cdr_termination', { acctid => $self->acctid, } );
1133 Parses the calldate in SQL string format and returns a UNIX timestamp.
1138 str2time(shift->calldate);
1143 Parses the startdate in UNIX timestamp format and returns a string in SQL
1149 my($sec,$min,$hour,$mday,$mon,$year) = localtime(shift->startdate);
1152 "$year-$mon-$mday $hour:$min:$sec";
1157 Returns the FS::cdr_carrier object associated with this CDR, or false if no
1158 carrierid is defined.
1162 my %carrier_cache = ();
1166 return '' unless $self->carrierid;
1167 $carrier_cache{$self->carrierid} ||=
1168 qsearchs('cdr_carrier', { 'carrierid' => $self->carrierid } );
1173 Returns the carrier name (see L<FS::cdr_carrier>), or the empty string if
1174 no FS::cdr_carrier object is assocated with this CDR.
1180 my $cdr_carrier = $self->cdr_carrier;
1181 $cdr_carrier ? $cdr_carrier->carriername : '';
1186 Returns the FS::cdr_calltype object associated with this CDR, or false if no
1187 calltypenum is defined.
1191 my %calltype_cache = ();
1195 return '' unless $self->calltypenum;
1196 $calltype_cache{$self->calltypenum} ||=
1197 qsearchs('cdr_calltype', { 'calltypenum' => $self->calltypenum } );
1202 Returns the call type name (see L<FS::cdr_calltype>), or the empty string if
1203 no FS::cdr_calltype object is assocated with this CDR.
1209 my $cdr_calltype = $self->cdr_calltype;
1210 $cdr_calltype ? $cdr_calltype->calltypename : '';
1213 =item downstream_csv [ OPTION => VALUE, ... ]
1217 # in the future, load this dynamically from detail_format classes
1219 my %export_names = (
1222 'invoice_header' => "Date,Time,Name,Destination,Duration,Price",
1225 'name' => 'Simple with source',
1226 'invoice_header' => "Date,Time,Called From,Destination,Duration,Price",
1227 #"Date,Time,Name,Called From,Destination,Duration,Price",
1229 'accountcode_simple' => {
1230 'name' => 'Simple with accountcode',
1231 'invoice_header' => "Date,Time,Called From,Account,Duration,Price",
1235 'invoice_header' => "Date/Time,Called Number,Min/Sec,Price",
1237 'basic_upstream_dst_regionname' => {
1238 'name' => 'Basic with upstream destination name',
1239 'invoice_header' => "Date/Time,Called Number,Destination,Min/Sec,Price",
1242 'name' => 'Default',
1243 'invoice_header' => 'Date,Time,Number,Destination,Duration,Price',
1245 'source_default' => {
1246 'name' => 'Default with source',
1247 'invoice_header' => 'Caller,Date,Time,Number,Destination,Duration,Price',
1249 'accountcode_default' => {
1250 'name' => 'Default plus accountcode',
1251 'invoice_header' => 'Date,Time,Account,Number,Destination,Duration,Price',
1253 'description_default' => {
1254 'name' => 'Default with description field as destination',
1255 'invoice_header' => 'Caller,Date,Time,Number,Destination,Duration,Price',
1258 'name' => 'Summary, one line per service',
1259 'invoice_header' => 'Caller,Rate,Calls,Minutes,Price',
1262 'name' => 'Number of calls, one line per service',
1263 'invoice_header' => 'Caller,Rate,Messages,Price',
1265 'sum_duration_prefix' => {
1266 'name' => 'Summary, one line per destination prefix',
1267 'invoice_header' => 'Caller,Rate,Calls,Minutes,Price',
1269 'sum_count_class' => {
1270 'name' => 'Summary, one line per usage class',
1271 'invoice_header' => 'Caller,Class,Calls,Price',
1275 my %export_formats = ();
1276 sub export_formats {
1279 return %export_formats if keys %export_formats;
1281 my $conf = new FS::Conf;
1282 my $date_format = $conf->config('date_format') || '%m/%d/%Y';
1284 # call duration in the largest units that accurately reflect the granularity
1285 my $duration_sub = sub {
1286 my($cdr, %opt) = @_;
1287 my $sec = $opt{seconds} || $cdr->billsec;
1288 if ( defined $opt{granularity} &&
1289 $opt{granularity} == 0 ) { #per call
1292 elsif ( defined $opt{granularity} && $opt{granularity} == 60 ) {#full minutes
1293 my $min = int($sec/60);
1297 else { #anything else
1298 return sprintf("%dm %ds", $sec/60, $sec%60);
1302 my $price_sub = sub {
1303 my ($cdr, %opt) = @_;
1305 if ( defined($opt{charge}) ) {
1306 $price = $opt{charge};
1308 elsif ( $opt{inbound} ) {
1309 my $term = $cdr->cdr_termination(1); # 1 = inbound
1310 $price = $term->rated_price if defined $term;
1313 $price = $cdr->rated_price;
1315 length($price) ? ($opt{money_char} . $price) : '';
1318 my $src_sub = sub { $_[0]->clid || $_[0]->src };
1322 sub { time2str($date_format, shift->calldate_unix ) }, #DATE
1323 sub { time2str('%r', shift->calldate_unix ) }, #TIME
1325 'dst', #NUMBER_DIALED
1326 $duration_sub, #DURATION
1327 #sub { sprintf('%.3f', shift->upstream_price ) }, #PRICE
1331 sub { time2str($date_format, shift->calldate_unix ) }, #DATE
1332 sub { time2str('%r', shift->calldate_unix ) }, #TIME
1334 $src_sub, #called from
1335 'dst', #NUMBER_DIALED
1336 $duration_sub, #DURATION
1337 #sub { sprintf('%.3f', shift->upstream_price ) }, #PRICE
1340 'accountcode_simple' => [
1341 sub { time2str($date_format, shift->calldate_unix ) }, #DATE
1342 sub { time2str('%r', shift->calldate_unix ) }, #TIME
1343 $src_sub, #called from
1344 'accountcode', #NUMBER_DIALED
1345 $duration_sub, #DURATION
1349 # for summary formats, the CDR is a fictitious object containing the
1350 # total billsec and the phone number of the service
1352 sub { my($cdr, %opt) = @_; $opt{ratename} },
1353 sub { my($cdr, %opt) = @_; $opt{count} },
1354 sub { my($cdr, %opt) = @_; int($opt{seconds}/60).'m' },
1359 sub { my($cdr, %opt) = @_; $opt{ratename} },
1360 sub { my($cdr, %opt) = @_; $opt{count} },
1364 sub { time2str('%d %b - %I:%M %p', shift->calldate_unix) },
1372 sub { time2str($date_format, shift->calldate_unix ) },
1373 # #time2str("%Y %b %d - %r", $cdr->calldate_unix ),
1376 sub { time2str('%r', shift->calldate_unix ) },
1377 # time2str("%c", $cdr->calldate_unix), #XXX this should probably be a config option dropdown so they can select US vs- rest of world dates or whatnot
1380 sub { my($cdr, %opt) = @_; $opt{pretty_dst} || $cdr->dst; },
1382 #REGIONNAME ("Destination")
1383 sub { my($cdr, %opt) = @_; $opt{dst_regionname}; },
1392 $export_formats{'source_default'} = [ $src_sub, @{ $export_formats{'default'} }, ];
1393 $export_formats{'accountcode_default'} =
1394 [ @{ $export_formats{'default'} }[0,1],
1396 @{ $export_formats{'default'} }[2..5],
1398 my @default = @{ $export_formats{'default'} };
1399 $export_formats{'description_default'} =
1400 [ $src_sub, @default[0..2],
1401 sub { my($cdr, %opt) = @_; $cdr->description },
1404 return %export_formats;
1407 =item downstream_csv OPTION => VALUE ...
1409 Returns a string of formatted call details for display on an invoice.
1415 charge - override the 'rated_price' field of the CDR
1417 seconds - override the 'billsec' field of the CDR
1419 count - number of usage events included in this record, for summary formats
1421 ratename - name of the rate table used to rate this call
1427 sub downstream_csv {
1428 my( $self, %opt ) = @_;
1430 my $format = $opt{'format'};
1431 my %formats = $self->export_formats;
1432 return "Unknown format $format" unless exists $formats{$format};
1434 #my $conf = new FS::Conf;
1435 #$opt{'money_char'} ||= $conf->config('money_char') || '$';
1436 $opt{'money_char'} ||= FS::Conf->new->config('money_char') || '$';
1438 my $csv = new Text::CSV_XS;
1442 ref($_) ? &{$_}($self, %opt) : $self->$_();
1444 @{ $formats{$format} };
1446 return @columns if defined $opt{'keeparray'};
1448 my $status = $csv->combine(@columns);
1449 die "FS::CDR: error combining ". $csv->error_input(). "into downstream CSV"
1458 =head1 CLASS METHODS
1462 =item invoice_formats
1464 Returns an ordered list of key value pairs containing invoice format names
1465 as keys (for use with part_pkg::voip_cdr) and "pretty" format names as values.
1469 # in the future, load this dynamically from detail_format classes
1471 sub invoice_formats {
1472 map { ($_ => $export_names{$_}->{'name'}) }
1473 grep { $export_names{$_}->{'invoice_header'} }
1474 sort keys %export_names;
1477 =item invoice_header FORMAT
1479 Returns a scalar containing the CSV column header for invoice format FORMAT.
1483 sub invoice_header {
1485 $export_names{$format}->{'invoice_header'};
1490 Clears cdr and any associated cdr_termination statuses - used for
1499 local $SIG{HUP} = 'IGNORE';
1500 local $SIG{INT} = 'IGNORE';
1501 local $SIG{QUIT} = 'IGNORE';
1502 local $SIG{TERM} = 'IGNORE';
1503 local $SIG{TSTP} = 'IGNORE';
1504 local $SIG{PIPE} = 'IGNORE';
1506 my $oldAutoCommit = $FS::UID::AutoCommit;
1507 local $FS::UID::AutoCommit = 0;
1510 if ( $cdr_prerate && $cdr_prerate_cdrtypenums{$self->cdrtypenum}
1511 && $self->rated_ratedetailnum #avoid putting old CDRs back in "rated"
1512 && $self->freesidestatus eq 'done'
1516 $self->freesidestatus('rated');
1518 $self->freesidestatus('');
1521 my $error = $self->replace;
1523 $dbh->rollback if $oldAutoCommit;
1527 foreach my $cdr_termination ( $self->cdr_termination ) {
1528 #$cdr_termination->status('');
1529 #$error = $cdr_termination->replace;
1530 $error = $cdr_termination->delete;
1532 $dbh->rollback if $oldAutoCommit;
1537 $dbh->commit or die $dbh->errstr if $oldAutoCommit;
1542 =item import_formats
1544 Returns an ordered list of key value pairs containing import format names
1545 as keys (for use with batch_import) and "pretty" format names as values.
1549 #false laziness w/part_pkg & part_export
1552 foreach my $INC ( @INC ) {
1553 warn "globbing $INC/FS/cdr/[a-z]*.pm\n" if $DEBUG;
1554 foreach my $file ( glob("$INC/FS/cdr/[a-z]*.pm") ) {
1555 warn "attempting to load CDR format info from $file\n" if $DEBUG;
1556 $file =~ /\/(\w+)\.pm$/ or do {
1557 warn "unrecognized file in $INC/FS/cdr/: $file\n";
1561 my $info = eval "use FS::cdr::$mod; ".
1562 "\\%FS::cdr::$mod\::info;";
1564 die "error using FS::cdr::$mod (skipping): $@\n" if $@;
1567 unless ( keys %$info ) {
1568 warn "no %info hash found in FS::cdr::$mod, skipping\n";
1571 warn "got CDR format info from FS::cdr::$mod: $info\n" if $DEBUG;
1572 if ( exists($info->{'disabled'}) && $info->{'disabled'} ) {
1573 warn "skipping disabled CDR format FS::cdr::$mod" if $DEBUG;
1576 $cdr_info{$mod} = $info;
1580 tie my %import_formats, 'Tie::IxHash',
1581 map { $_ => $cdr_info{$_}->{'name'} }
1582 sort { $cdr_info{$a}->{'weight'} <=> $cdr_info{$b}->{'weight'} }
1583 grep { exists($cdr_info{$_}->{'import_fields'}) }
1586 sub import_formats {
1590 sub _cdr_min_parser_maker {
1592 my @fields = ref($field) ? @$field : ($field);
1593 @fields = qw( billsec duration ) unless scalar(@fields) && $fields[0];
1595 my( $cdr, $min ) = @_;
1596 my $sec = eval { _cdr_min_parse($min) };
1597 die "error parsing seconds for @fields from $min minutes: $@\n" if $@;
1598 $cdr->$_($sec) foreach @fields;
1602 sub _cdr_min_parse {
1604 sprintf('%.0f', $min * 60 );
1607 sub _cdr_date_parser_maker {
1610 my @fields = ref($field) ? @$field : ($field);
1612 my( $cdr, $datestring ) = @_;
1613 my $unixdate = eval { _cdr_date_parse($datestring, %options) };
1614 die "error parsing date for @fields from $datestring: $@\n" if $@;
1615 $cdr->$_($unixdate) foreach @fields;
1619 sub _cdr_date_parse {
1623 return '' unless length($date); #that's okay, it becomes NULL
1624 return '' if $date eq 'NA'; #sansay
1626 if ( $date =~ /^([a-z]{3})\s+([a-z]{3})\s+(\d{1,2})\s+(\d{1,2}):(\d{1,2}):(\d{1,2})\s+(\d{4})$/i && $7 > 1970 ) {
1627 my $time = str2time($date);
1628 return $time if $time > 100000; #just in case
1631 my($year, $mon, $day, $hour, $min, $sec);
1633 #$date =~ /^\s*(\d{4})[\-\/]\(\d{1,2})[\-\/](\d{1,2})\s+(\d{1,2}):(\d{1,2}):(\d{1,2})\s*$/
1634 #taqua #2007-10-31 08:57:24.113000000
1636 if ( $date =~ /^\s*(\d{4})\D(\d{1,2})\D(\d{1,2})\D+(\d{1,2})\D(\d{1,2})\D(\d{1,2})(\D|$)/ ) {
1637 ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1638 } elsif ( $date =~ /^\s*(\d{1,2})\D(\d{1,2})\D(\d{4})\s+(\d{1,2})\D(\d{1,2})(?:\D(\d{1,2}))?(\D|$)/ ) {
1639 # 8/26/2010 12:20:01
1640 # optionally without seconds
1641 ($mon, $day, $year, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1642 $sec = 0 if !defined($sec);
1643 } elsif ( $date =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})(\.\d+)$/ ) {
1644 # broadsoft: 20081223201938.314
1645 ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1646 } elsif ( $date =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})\d+(\D|$)/ ) {
1647 # Taqua OM: 20050422203450943
1648 ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1649 } elsif ( $date =~ /^\s*(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})$/ ) {
1650 # WIP: 20100329121420
1651 ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1652 } elsif ( $date =~ /^(\d{4})-(\d{2})-(\d{2})T(\d{2}):(\d{2}):(\d{2})Z$/) {
1653 # Telos 2014-10-10T05:30:33Z
1654 ($year, $mon, $day, $hour, $min, $sec) = ( $1, $2, $3, $4, $5, $6 );
1657 die "unparsable date: $date"; #maybe we shouldn't die...
1660 return '' if ( $year == 1900 || $year == 1970 ) && $mon == 1 && $day == 1
1661 && $hour == 0 && $min == 0 && $sec == 0;
1663 if ($options{gmt}) {
1664 timegm($sec, $min, $hour, $day, $mon-1, $year);
1666 timelocal($sec, $min, $hour, $day, $mon-1, $year);
1670 =item batch_import HASHREF
1672 Imports CDR records. Available options are:
1684 Hash reference of preset fields, typically cdrbatch
1688 Set true to prevent throwing an error on empty imports
1694 my %import_options = (
1697 'batch_keycol' => 'cdrbatchnum',
1698 'batch_table' => 'cdr_batch',
1699 'batch_namecol' => 'cdrbatch',
1701 'formats' => { map { $_ => $cdr_info{$_}->{'import_fields'}; }
1705 #drop the || 'csv' to allow auto xls for csv types?
1706 'format_types' => { map { $_ => lc($cdr_info{$_}->{'type'} || 'csv'); }
1710 'format_headers' => { map { $_ => ( $cdr_info{$_}->{'header'} || 0 ); }
1714 'format_sep_chars' => { map { $_ => $cdr_info{$_}->{'sep_char'}; }
1718 'format_fixedlength_formats' =>
1719 { map { $_ => $cdr_info{$_}->{'fixedlength_format'}; }
1723 'format_xml_formats' =>
1724 { map { $_ => $cdr_info{$_}->{'xml_format'}; }
1728 'format_asn_formats' =>
1729 { map { $_ => $cdr_info{$_}->{'asn_format'}; }
1733 'format_row_callbacks' =>
1734 { map { $_ => $cdr_info{$_}->{'row_callback'}; }
1738 'format_parser_opts' =>
1739 { map { $_ => $cdr_info{$_}->{'parser_opt'}; }
1744 sub _import_options {
1751 my $iopt = _import_options;
1752 $opt->{$_} = $iopt->{$_} foreach keys %$iopt;
1754 if ( defined $opt->{'cdrtypenum'} ) {
1755 $opt->{'preinsert_callback'} = sub {
1756 my($record,$param) = (shift,shift);
1757 $record->cdrtypenum($opt->{'cdrtypenum'});
1762 FS::Record::batch_import( $opt );
1766 =item process_batch_import
1770 sub process_batch_import {
1773 my $opt = _import_options;
1774 # $opt->{'params'} = [ 'format', 'cdrbatch' ];
1776 FS::Record::process_batch_import( $job, $opt, @_ );
1779 # if ( $format eq 'simple' ) { #should be a callback or opt in FS::cdr::simple
1780 # @columns = map { s/^ +//; $_; } @columns;
1785 # Used by FS::Upgrade to migrate to a new database.
1788 my ($class, %opts) = @_;
1790 warn "$me upgrading $class\n" if $DEBUG;
1792 my $sth = dbh->prepare(
1793 'SELECT DISTINCT(cdrbatch) FROM cdr WHERE cdrbatch IS NOT NULL'
1794 ) or die dbh->errstr;
1796 $sth->execute or die $sth->errstr;
1798 my %cdrbatchnum = ();
1799 while (my $row = $sth->fetchrow_arrayref) {
1801 my $cdr_batch = qsearchs( 'cdr_batch', { 'cdrbatch' => $row->[0] } );
1802 unless ( $cdr_batch ) {
1803 $cdr_batch = new FS::cdr_batch { 'cdrbatch' => $row->[0] };
1804 my $error = $cdr_batch->insert;
1805 die $error if $error;
1808 $cdrbatchnum{$row->[0]} = $cdr_batch->cdrbatchnum;
1811 $sth = dbh->prepare('UPDATE cdr SET cdrbatch = NULL, cdrbatchnum = ? WHERE cdrbatch IS NOT NULL AND cdrbatch = ?') or die dbh->errstr;
1813 foreach my $cdrbatch (keys %cdrbatchnum) {
1814 $sth->execute($cdrbatchnum{$cdrbatch}, $cdrbatch) or die $sth->errstr;
1819 =item ip_addr_sql FIELD RANGE
1821 Returns an SQL condition to search for CDRs with an IP address
1822 within RANGE. FIELD is either 'src_ip_addr' or 'dst_ip_addr'. RANGE
1823 should be in the form "a.b.c.d-e.f.g.h' (dotted quads), where any of
1824 the leftmost octets of the second address can be omitted if they're
1825 the same as the first address.
1831 my ($field, $range) = @_;
1832 $range =~ /^[\d\.-]+$/ or die "bad ip address range '$range'";
1833 my @r = split('-', $range);
1834 my @saddr = split('\.', $r[0] || '');
1835 my @eaddr = split('\.', $r[1] || '');
1836 unshift @eaddr, (undef) x (4 - scalar @eaddr);
1838 $eaddr[$_] = $saddr[$_] if !defined $eaddr[$_];
1840 "$field >= '".sprintf('%03d.%03d.%03d.%03d', @saddr) . "' AND ".
1841 "$field <= '".sprintf('%03d.%03d.%03d.%03d', @eaddr) . "'";
1850 L<FS::Record>, schema.html from the base documentation.