diff options
Diffstat (limited to 'rt/Makefile')
| -rw-r--r-- | rt/Makefile | 572 |
1 files changed, 0 insertions, 572 deletions
diff --git a/rt/Makefile b/rt/Makefile deleted file mode 100644 index 1ad55304f..000000000 --- a/rt/Makefile +++ /dev/null @@ -1,572 +0,0 @@ -# BEGIN BPS TAGGED BLOCK {{{ -# -# COPYRIGHT: -# -# This software is Copyright (c) 1996-2014 Best Practical Solutions, LLC -# <sales@bestpractical.com> -# -# (Except where explicitly superseded by other copyright notices) -# -# -# LICENSE: -# -# This work is made available to you under the terms of Version 2 of -# the GNU General Public License. A copy of that license should have -# been provided with this software, but in any event can be snarfed -# from www.gnu.org. -# -# This work is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301 or visit their web page on the internet at -# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html. -# -# -# CONTRIBUTION SUBMISSION POLICY: -# -# (The following paragraph is not intended to limit the rights granted -# to you to modify and distribute this software under the terms of -# the GNU General Public License and is only of importance to you if -# you choose to contribute your changes and enhancements to the -# community by submitting them to Best Practical Solutions, LLC.) -# -# By intentionally submitting any modifications, corrections or -# derivatives to this work, or any other work intended for use with -# Request Tracker, to Best Practical Solutions, LLC, you confirm that -# you are the copyright holder for those contributions and you grant -# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable, -# royalty-free, perpetual, license to use, copy, create derivative -# works based on those contributions, and sublicense and distribute -# those contributions and any derivatives thereof. -# -# END BPS TAGGED BLOCK }}} -# -# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated. -# Have a look at "configure" and "Makefile.in" instead -# - - -PERL = /usr/bin/perl -INSTALL = /usr/bin/install -c -CC = @CC@ - -RT_LAYOUT = Freeside - -CONFIG_FILE_PATH = /opt/rt3/etc -CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm -SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm - - -RT_VERSION_MAJOR = 4 -RT_VERSION_MINOR = 0 -RT_VERSION_PATCH = 22 - -RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH) -TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH) - - -# This is the group that all of the installed files will be chgrp'ed to. -RTGROUP = freeside - - -# User which should own rt binaries. -BIN_OWNER = root - -# User that should own all of RT's libraries, generally root. -LIBS_OWNER = root - -# Group that should own all of RT's libraries, generally root. -LIBS_GROUP = bin - -WEB_USER = freeside -WEB_GROUP = freeside - - -APACHECTL = /usr/sbin/apachectl - - -# DESTDIR allows you to specify that RT be installed somewhere other than -# where it will eventually reside. DESTDIR _must_ have a trailing slash -# if it's defined. - -DESTDIR = - - - -RT_PATH = /opt/rt3 -RT_ETC_PATH = /opt/rt3/etc -RT_BIN_PATH = /opt/rt3/bin -RT_SBIN_PATH = /opt/rt3/sbin -RT_LIB_PATH = /opt/rt3/lib -RT_MAN_PATH = /opt/rt3/man -RT_VAR_PATH = /opt/rt3/var -RT_DOC_PATH = /opt/rt3/docs -RT_FONT_PATH = /opt/rt3/share/fonts -RT_LEXICON_PATH = /opt/rt3/share/po -RT_LOCAL_PATH = /opt/rt3/local -LOCAL_PLUGIN_PATH = /opt/rt3/local/plugins -LOCAL_ETC_PATH = /opt/rt3/local/etc -LOCAL_LIB_PATH = /opt/rt3/local/lib -LOCAL_LEXICON_PATH = /opt/rt3/local/po -MASON_HTML_PATH = /var/www/freeside/rt -MASON_LOCAL_HTML_PATH = /opt/rt3/local/html -MASON_DATA_PATH = /usr/local/etc/freeside/masondata -MASON_SESSION_PATH = /opt/rt3/var/session_data -RT_LOG_PATH = /opt/rt3/var/log - -# RT_READABLE_DIR_MODE is the mode of directories that are generally meant -# to be accessable -RT_READABLE_DIR_MODE = 0755 - - - - - -# RT's CLI -RT_CLI_BIN = rt -# RT's mail gateway -RT_MAILGATE_BIN = rt-mailgate -# RT's cron tool -RT_CRON_BIN = rt-crontool - - - -BINARIES = $(RT_MAILGATE_BIN) \ - $(RT_CLI_BIN) \ - $(RT_CRON_BIN) - -SYSTEM_BINARIES = rt-attributes-viewer \ - rt-clean-sessions \ - rt-dump-metadata \ - rt-email-dashboards \ - rt-email-digest \ - rt-email-group-admin \ - rt-fulltext-indexer \ - rt-preferences-viewer \ - rt-server \ - rt-session-viewer \ - rt-server.fcgi \ - rt-session-viewer \ - rt-setup-database \ - rt-setup-fulltext-index \ - rt-shredder \ - rt-test-dependencies \ - rt-validator \ - rt-validate-aliases \ - standalone_httpd - - -ETC_FILES = acl.Pg \ - acl.Oracle \ - acl.mysql \ - schema.Pg \ - schema.Oracle \ - schema.mysql \ - schema.SQLite \ - initialdata - - - -WEB_HANDLER = modperl2 - - - -# -# DB_TYPE defines what sort of database RT trys to talk to -# "mysql", "Oracle", "Pg", and "SQLite" are known to work. - -DB_TYPE = Pg - -# Set DBA to the name of a unix account with the proper permissions and -# environment to run your commandline SQL sbin - -# Set DB_DBA to the name of a DB user with permission to create new databases - -# For mysql, you probably want 'root' -# For Pg, you probably want 'postgres' -# For Oracle, you want 'system' - -DB_DBA = freeside - -DB_HOST = localhost - -# If you're not running your database server on its default port, -# specifiy the port the database server is running on below. -# It's generally safe to leave this blank - -DB_PORT = - - - - -# -# Set this to the canonical name of the interface RT will be talking to the -# database on. If you said that the RT_DB_HOST above was "localhost," this -# should be too. This value will be used to grant rt access to the database. -# If you want to access the RT database from multiple hosts, you'll need -# to grant those database rights by hand. -# - -DB_RT_HOST = localhost - -# set this to the name you want to give to the RT database in -# your database server. For Oracle, this should be the name of your sid - -DB_DATABASE = freeside -DB_RT_USER = freeside -DB_RT_PASS = - - - -TEST_FILES = t/*.t t/*/*.t -TEST_VERBOSE = 0 - -RT_TEST_PARALLEL_NUM ?= 5 - - -#################################################################### - -all: default - -default: - @echo "Please read RT's README before beginning your installation." - - - -instruct: - @echo "Congratulations. RT is now installed." - @echo "" - @echo "" - @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)." - @echo "" - @echo "(You will definitely need to set RT's database password in " - @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be " - @echo "very dangerous. Note that you do not have to manually add a " - @echo "database user or set up a database for RT. These actions will be " - @echo "taken care of in the next step.)" - @echo "" - @echo "After that, you need to initialize RT's database by running" - @echo " 'make initialize-database'" - - -upgrade-instruct: - @echo "Congratulations. RT has been upgraded. You should now check over" - @echo "$(CONFIG_FILE) for any necessary site customization. Additionally," - @echo "you should update RT's system database objects by running " - @echo " make upgrade-database" - - -upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct - -my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"') -testdeps: - $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers) - -depends: fixdeps - -fixdeps: - $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers) - -#}}} - -fixperms: - # Make the libraries readable - chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH) - chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH) - chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH) - chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH) - - - chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH) - - chmod 0755 $(DESTDIR)$(RT_ETC_PATH) - cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true - - #TODO: the config file should probably be able to have its - # owner set separately from the binaries. - chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH) - chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH) - - chmod 0440 $(DESTDIR)$(CONFIG_FILE) - chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE) - # Make this externally readable - chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata - - # Make the system binaries - cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES)) - - # Make the system binaries executable also - cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES)) - - # Make upgrade scripts executable if they are in the source. - # - # Note that we use the deprecated (by GNU/POSIX find) -perm +0NNN syntax - # instead of -perm /0NNN since BSD find doesn't support the latter. - ( cd etc/upgrade && find . -type f -not -name '*.in' -perm +0111 -print ) | while read file ; do \ - chmod a+x "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \ - done - - # Make the web ui readable by all. - chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \ - $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ - $(DESTDIR)$(RT_LEXICON_PATH) \ - $(DESTDIR)$(LOCAL_LEXICON_PATH) - chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \ - $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ - $(DESTDIR)$(RT_LEXICON_PATH) \ - $(DESTDIR)$(LOCAL_LEXICON_PATH) - chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \ - $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ - $(DESTDIR)$(RT_LEXICON_PATH) \ - $(DESTDIR)$(LOCAL_LEXICON_PATH) - - # Make the web ui's data dir writable - chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \ - $(DESTDIR)$(MASON_SESSION_PATH) - chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \ - $(DESTDIR)$(MASON_SESSION_PATH) - chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \ - $(DESTDIR)$(MASON_SESSION_PATH) - -dirs: - $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH) - $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH) - $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache - $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc - $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj - $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH) - $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH) - -install: testdeps config-install dirs files-install fixperms instruct - -files-install: libs-install etc-install config-install bin-install sbin-install html-install doc-install font-install po-install - -config-install: - $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH) - -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE) - [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE) - @echo "Installed configuration. About to install RT in $(RT_PATH)" - -test: - $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES) - -parallel-test: test-parallel - -test-parallel: - RT_TEST_PARALLEL=1 $(PERL) "-MApp::Prove" -e 'my $$p = App::Prove->new(); $$p->process_args("-wlrj$(RT_TEST_PARALLEL_NUM)","--state=slow,save", "t"); exit( $$p->run() ? 0 : 1 )' - -regression-reset-db: force-dropdb - $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba-password '' - -initdb :: initialize-database - -initialize-database: - $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --prompt-for-dba-password - -upgrade-database: - $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action upgrade --prompt-for-dba-password - -dropdb: - $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --prompt-for-dba-password - -force-dropdb: - $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba-password '' --force - -critic: - perlcritic --quiet sbin bin lib - -libs-install: - [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH) - -( cd lib && find . -type d -print ) | while read dir ; do \ - $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \ - done - -( cd lib && find . -type f -print ) | while read file ; do \ - $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \ - done - -html-install: - [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH) - -( cd share/html && find . -type d -print ) | while read dir ; do \ - $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \ - done - -( cd share/html && find . -type f -print ) | while read file ; do \ - $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \ - done - -font-install: - [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH) - -( cd share/fonts && find . -type f -print ) | while read file ; do \ - $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \ - done - - -po-install: - [ -d $(DESTDIR)$(RT_LEXICON_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH) - -( cd share/po && find . -type f -print ) | while read file ; do \ - $(INSTALL) -m 0644 "share/po/$$file" "$(DESTDIR)$(RT_LEXICON_PATH)/$$file" ; \ - done - - - -doc-install: - # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir - -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH) - [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH) - -( cd docs && find . -type d -print ) | while read dir ; do \ - $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_DOC_PATH)/$$dir" ; \ - done - -( cd docs && find . -type f -print ) | while read file ; do \ - $(INSTALL) -m 0644 "docs/$$file" "$(DESTDIR)$(RT_DOC_PATH)/$$file" ; \ - done - -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/ - - -etc-install: - [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH) - for file in $(ETC_FILES) ; do \ - $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \ - done - [ -d $(DESTDIR)$(RT_ETC_PATH)/upgrade ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)/upgrade - -( cd etc/upgrade && find . -type d -print ) | while read dir ; do \ - $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$dir" ; \ - done - -( cd etc/upgrade && find . -type f -not -name '*.in' -print ) | while read file ; do \ - $(INSTALL) -m 0644 "etc/upgrade/$$file" "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \ - done - - -sbin-install: - $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH) - for file in $(SYSTEM_BINARIES) ; do \ - $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \ - done - - - -bin-install: - $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH) - for file in $(BINARIES) ; do \ - $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \ - done - - - -regenerate-catalogs: - $(PERL) devel/tools/extract-message-catalog - -license-tag: - $(PERL) devel/tools/license_tag - -factory: initialize-database - cd lib; $(PERL) ../devel/tools/factory $(DB_DATABASE) RT - -start-httpd: - $(PERL) sbin/standalone_httpd & - -start-server: - $(PERL) sbin/rt-server & - -apachectl: - $(APACHECTL) stop - sleep 10 - $(APACHECTL) start - sleep 5 - -SNAPSHOT=$(shell git describe --tags) -THIRD_PARTY=devel/third-party/ -snapshot: build-snapshot build-third-party clearsign-snapshot clearsign-third-party snapshot-shasums - -build-snapshot: - git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf - - ( cd $(SNAPSHOT) && \ - echo "$(SNAPSHOT)" > .tag && \ - autoconf && \ - INSTALL=./install-sh PERL=/usr/bin/perl ./configure \ - --with-db-type=SQLite \ - --enable-layout=relative \ - --with-web-handler=standalone && \ - rm -rf autom4te.cache \ - config.status config.log config.pld \ - ) - tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/" - rm -fr "$(SNAPSHOT)/" - -clearsign-snapshot: - gpg --no-armor --detach-sign "$(SNAPSHOT).tar.gz" - -build-third-party: - git archive --prefix "$(SNAPSHOT)/$(THIRD_PARTY)" HEAD:$(THIRD_PARTY) \ - | gzip > "$(SNAPSHOT)-third-party-source.tar.gz" - rm -rf "$(SNAPSHOT)/$(THIRD_PARTY)" - -clearsign-third-party: - gpg --no-armor --detach-sign "$(SNAPSHOT)-third-party-source.tar.gz" - -snapshot-shasums: - sha1sum $(SNAPSHOT)*.tar.gz* - -vessel-import: build-snapshot - [ -d $(VESSEL) ] || (echo "VESSEL isn't a path to your shipwright vessel" && exit -1) - cp $(VESSEL)/scripts/RT/build.pl /tmp/build.pl - ./sbin/rt-test-dependencies --with-standalone --with-fastcgi --with-sqlite --list > /tmp/rt.yml - shipwright import file:$(SNAPSHOT).tar.gz \ - --require-yml /tmp/rt.yml \ - --build-script /tmp/build.pl \ - --name RT \ - --repository fs:$(VESSEL) \ - --log-level=info \ - --skip cpan-capitalization,cpan-mod_perl,cpan-Encode,cpan-PPI,cpan-Test-Exception-LessClever,cpan-Test-Manifest,cpan-Test-Object,cpan-Test-Pod,cpan-Test-Requires,cpan-Test-SubCalls,cpan-Test-cpan-Tester,cpan-Test-Warn --skip-all-recommends - mv $(VESSEL)/scripts/RT/build $(VESSEL)/scripts/RT/build.pl - -JSMIN_URL = http://download.bestpractical.com/mirror/jsmin-2011-01-22.c -JSMIN_SHA = 8a6b3b980a52c028eb73aee4a82ebe060c1ee854 - -jsmin: jsmin-checkcc jsmin-fetch jsmin-verify jsmin-confirm jsmin-build jsmin-install - @echo "" - @echo "To configure RT to use jsmin, add the following line to $(DESTDIR)$(RT_ETC_PATH)/RT_SiteConfig.pm:" - @echo "" - @echo " Set(\$$JSMinPath, '$(DESTDIR)$(RT_BIN_PATH)/jsmin');" - @echo "" - -jsmin-checkcc: - @[ -n "$(CC)" ] || (echo "You don't appear to have a C compiler, please set CC and re-run configure" && exit 1) - -jsmin-confirm: - @echo "jsmin is distributed under a slightly unusual license and can't be shipped" - @echo "with RT. Before configuring RT to use jsmin, please read jsmin's license" - @echo "below:" - @echo "" - @$(PERL) -pe 'print && exit if /^\*\// or /^#include/' jsmin.c - @echo "" - @echo "Press Enter to accept the license, or Ctrl-C to stop now." - @$(PERL) -e '<STDIN>' - -jsmin-fetch: - @echo "" - @echo "Downloading jsmin.c from $(JSMIN_URL)" - @echo "" - @$(PERL) -MLWP::Simple -e 'exit not is_success(getstore("$(JSMIN_URL)", "jsmin.c"))' \ - || (echo "Failed to download $(JSMIN_URL)" && exit 1) - -jsmin-verify: - @$(PERL) -MDigest::SHA -e \ - 'exit not Digest::SHA->new(1)->addfile("jsmin.c")->hexdigest eq "$(JSMIN_SHA)"' \ - || (echo "Verification of jsmin.c failed! Possible man in the middle?" && exit 1) - -jsmin-build: - $(CC) -o jsmin jsmin.c - -jsmin-install: - $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "jsmin" "$(DESTDIR)$(RT_BIN_PATH)/" |