-#
-# WARNING: NEVER EDIT RT_Config.pm. Instead, copy any sections you want to change to RT_SiteConfig.pm
-# and edit them there.
-#
package RT;
=cut
-# {{{ Base Configuration
+=head1 WARNING
-# $rtname is the string that RT will look for in mail messages to
-# figure out what ticket a new piece of mail belongs to
+NEVER EDIT RT_Config.pm.
-# Your domain name is recommended, so as not to pollute the namespace.
-# once you start using a given tag, you should probably never change it.
-# (otherwise, mail for existing tickets won't get put in the right place
+Instead, copy any sections you want to change to F<RT_SiteConfig.pm> and edit them there.
+
+=cut
+
+=head1 Base Configuration
+
+=over 4
+
+=item C<$rtname>
+
+C<$rtname> is the string that RT will look for in mail messages to
+figure out what ticket a new piece of mail belongs to.
+
+Your domain name is recommended, so as not to pollute the namespace.
+once you start using a given tag, you should probably never change it.
+(otherwise, mail for existing tickets won't get put in the right place)
+
+=cut
Set($rtname , "example.com");
-# This regexp controls what subject tags RT recognizes as its own.
-# If you're not dealing with historical $rtname values, you'll likely
-# never have to enable this feature.
-#
-# Be VERY CAREFUL with it. Note that it overrides $rtname for subject
-# token matching and that you should use only "non-capturing" parenthesis
-# grouping. For example:
-#
-# Set($EmailSubjectTagRegex, qr/(?:example.com|example.org)/i );
-#
-# and NOT
-#
-# Set($EmailSubjectTagRegex, qr/(example.com|example.org)/i );
-#
-# This setting would make RT behave exactly as it does without the
-# setting enabled.
-#
-# Set($EmailSubjectTagRegex, qr/\Q$rtname\E/i );
+=item C<$EmailSubjectTagRegex>
+
+This regexp controls what subject tags RT recognizes as its own.
+If you're not dealing with historical C<$rtname> values, you'll likely
+never have to enable this feature.
+
+Be VERY CAREFUL with it. Note that it overrides C<$rtname> for subject
+token matching and that you should use only "non-capturing" parenthesis
+grouping. For example:
+
+C<Set($EmailSubjectTagRegex, qr/(?:example.com|example.org)/i );>
+
+and NOT
+
+C<Set($EmailSubjectTagRegex, qr/(example.com|example.org)/i );>
+
+This setting would make RT behave exactly as it does without the
+setting enabled.
+
+=cut
+
+#Set($EmailSubjectTagRegex, qr/\Q$rtname\E/i );
+
+
+=item C<$Organization>
+You should set this to your organization's DNS domain. For example,
+I<fsck.com> or I<asylum.arkham.ma.us>. It's used by the linking interface to
+guarantee that ticket URIs are unique and easy to construct.
-# You should set this to your organization's DNS domain. For example,
-# fsck.com or asylum.arkham.ma.us. It's used by the linking interface to
-# guarantee that ticket URIs are unique and easy to construct.
+=cut
Set($Organization , "example.com");
-# $user_passwd_min defines the minimum length for user passwords. Setting
-# it to 0 disables this check
+=item C<$MinimumPasswordLength>
+
+C<$MinimumPasswordLength> defines the minimum length for user
+passwords. Setting it to 0 disables this check.
+
+=cut
+
Set($MinimumPasswordLength , "5");
-# $Timezone is used to convert times entered by users into GMT and back again
-# It should be set to a timezone recognized by your local unix box.
+=item C<$Timezone>
+
+C<$Timezone> is used to convert times entered by users into GMT and back again
+It should be set to a timezone recognized by your local unix box.
+
+=cut
+
Set($Timezone , 'US/Eastern');
-# }}}
+=back
+
+=head1 Database Configuration
+
+=over 4
+
+=item C<$DatabaseType>
-# {{{ Database Configuration
+Database driver being used; case matters.
-# Database driver beeing used. Case matters
-# Valid types are "mysql", "Oracle" and "Pg"
+Valid types are "mysql", "Oracle" and "Pg"
+
+=cut
Set($DatabaseType , '@DB_TYPE@');
-# The domain name of your database server
-# If you're running mysql and it's on localhost,
-# leave it blank for enhanced performance
+=item C<$DatabaseHost>, C<$DatabaseRTHost>
+
+The domain name of your database server.
+
+If you're running mysql and it's on localhost,
+leave it blank for enhanced performance
+
+=cut
+
Set($DatabaseHost , '@DB_HOST@');
Set($DatabaseRTHost , '@DB_RT_HOST@');
-# The port that your database server is running on. Ignored unless it's
-# a positive integer. It's usually safe to leave this blank
+=item C<$DatabasePort>
+
+The port that your database server is running on. Ignored unless it's
+a positive integer. It's usually safe to leave this blank
+
+=cut
+
Set($DatabasePort , '@DB_PORT@');
-#The name of the database user (inside the database)
+=item C<$DatabaseUser>
+
+The name of the database user (inside the database)
+
+=cut
+
Set($DatabaseUser , '@DB_RT_USER@');
-# Password the DatabaseUser should use to access the database
+=item C<$DatabasePassword>
+
+Password the C<$DatabaseUser> should use to access the database
+
+=cut
+
Set($DatabasePassword , '@DB_RT_PASS@');
-# The name of the RT's database on your database server
+=item C<$DatabaseName>
+
+The name of the RT's database on your database server. For Oracle
+it's SID, DB objects are created in L<$DatabaseUser>'s schema.
+
+=cut
+
Set($DatabaseName , '@DB_DATABASE@');
-# If you're using Postgres and have compiled in SSL support,
-# set DatabaseRequireSSL to 1 to turn on SSL communication
+=item C<$DatabaseRequireSSL>
+
+If you're using Postgres and have compiled in SSL support,
+set C<$DatabaseRequireSSL> to 1 to turn on SSL communication
+
+=cut
+
Set($DatabaseRequireSSL , undef);
-# }}}
+=item C<$UseSQLForACLChecks>
+
+In RT for ages ACL are checked after search what in some situtations
+result in empty search pages and wrong count of tickets.
+
+Set C<$UseSQLForACLChecks> to 1 to use SQL and get rid of these problems.
+
+However, this option is beta. In some cases it result in performance
+improvements, but some setups can not handle it.
+
+=cut
+
+Set($UseSQLForACLChecks, undef);
+
+=item C<$TicketsItemMapSize>
+
+In RT at display page of a ticket and there is the current search,
+then links for first, next, previous and last ticket are shown in
+the menu.
+
+To build full map RT has to fetch full result set out of DB what can
+eat lots of resourses. Using this option it's possible to limit number
+of tickets fetched.
+
+Set C<$TicketsItemMapSize> to number of tickets you want RT to look
+at to build the map. If full result set is bigger than that number
+then there would be no 'last' link in the menu.
+
+Set this to zero to return back to old behaviour.
+
+=cut
+
+Set($TicketsItemMapSize, 1000);
+
+=back
+
+=head1 Incoming Mail Gateway Configuration
+
+=over 4
-# {{{ Incoming mail gateway configuration
+=item C<$OwnerEmail>
-# OwnerEmail is the address of a human who manages RT. RT will send
-# errors generated by the mail gateway to this address. This address
-# should _not_ be an address that's managed by your RT instance.
+C<$OwnerEmail> is the address of a human who manages RT. RT will send
+errors generated by the mail gateway to this address. This address
+should _not_ be an address that's managed by your RT instance.
+
+=cut
Set($OwnerEmail , 'root');
-# If $LoopsToRTOwner is defined, RT will send mail that it believes
-# might be a loop to $RT::OwnerEmail
+=item C<$LoopsToRTOwner>
+
+If C<$LoopsToRTOwner> is defined, RT will send mail that it believes
+might be a loop to C<$OwnerEmail>
+
+=cut
Set($LoopsToRTOwner , 1);
-# If $StoreLoops is defined, RT will record messages that it believes
-# to be part of mail loops.
-# As it does this, it will try to be careful not to send mail to the
-# sender of these messages
+=item C<$StoreLoops>
+
+If C<$StoreLoops> is defined, RT will record messages that it believes
+to be part of mail loops.
+
+As it does this, it will try to be careful not to send mail to the
+sender of these messages
+
+=cut
Set($StoreLoops , undef);
-# $MaxAttachmentSize sets the maximum size (in bytes) of attachments stored
-# in the database.
+=item C<$MaxAttachmentSize>
+
+C<$MaxAttachmentSize> sets the maximum size (in bytes) of attachments stored
+in the database.
+
+For mysql and oracle, we set this size at 10 megabytes.
+If you're running a postgres version earlier than 7.1, you will need
+to drop this to 8192. (8k)
+
+=cut
-# For mysql and oracle, we set this size at 10 megabytes.
-# If you're running a postgres version earlier than 7.1, you will need
-# to drop this to 8192. (8k)
Set($MaxAttachmentSize , 10000000);
-# $TruncateLongAttachments: if this is set to a non-undef value,
-# RT will truncate attachments longer than MaxAttachmentSize.
+=item C<$TruncateLongAttachments>
+
+C<$TruncateLongAttachments>: if this is set to a non-undef value,
+RT will truncate attachments longer than C<$MaxAttachmentSize>.
+
+=cut
Set($TruncateLongAttachments , undef);
-# $DropLongAttachments: if this is set to a non-undef value,
-# RT will silently drop attachments longer than MaxAttachmentSize.
+=item C<$DropLongAttachments>
+
+C<$DropLongAttachments>: if this is set to a non-undef value,
+RT will silently drop attachments longer than C<MaxAttachmentSize>.
+
+=cut
Set($DropLongAttachments , undef);
-# If $ParseNewMessageForTicketCcs is true, RT will attempt to divine
-# Ticket 'Cc' watchers from the To and Cc lines of incoming messages
-# Be forewarned that if you have _any_ addresses which forward mail to
-# RT automatically and you enable this option without modifying
-# "RTAddressRegexp" below, you will get yourself into a heap of trouble.
+=item C<$ParseNewMessageForTicketCcs>
+
+If C<$ParseNewMessageForTicketCcs> is true, RT will attempt to divine
+Ticket 'Cc' watchers from the To and Cc lines of incoming messages
+Be forewarned that if you have _any_ addresses which forward mail to
+RT automatically and you enable this option without modifying
+C<$RTAddressRegexp> below, you will get yourself into a heap of trouble.
+
+=cut
Set($ParseNewMessageForTicketCcs , undef);
-# RTAddressRegexp is used to make sure RT doesn't add itself as a ticket CC if
-# the setting above is enabled.
+=item C<$RTAddressRegexp>
+
+C<$RTAddressRegexp> is used to make sure RT doesn't add itself as a ticket CC if
+the setting above is enabled. It is important that you set this to a
+regular expression that matches all addresses used by your RT. This lets RT
+avoid sending mail to itself. It will also hide RT addresses from the list of
+"One-time Cc" and Bcc lists on ticket reply.
+
+If you have a number of addresses configured in your RT database already, you
+can generate a naive first pass regexp by using
+
+ perl etc/upgrade/generate-rtaddressregexp
+
+=cut
+
+Set($RTAddressRegexp , undef);
-Set($RTAddressRegexp , '^rt\@example.com$');
+=item C<$IgnoreCcRegexp>
-# RT provides functionality which allows the system to rewrite
-# incoming email addresses. In its simplest form,
-# you can substitute the value in CanonicalizeEmailAddressReplace
-# for the value in CanonicalizeEmailAddressMatch
-# (These values are passed to the CanonicalizeEmailAddress subroutine in RT/User.pm)
-# By default, that routine performs a s/$Match/$Replace/gi on any address passed to it
+C<$IgnoreCcRegexp> is a regexp to exclude addresses from automatic addition
+to the Cc list. Use this for addresses that are I<not> received by RT but
+are sometimes added to Cc lists by mistake. Unlike C<$RTAddressRegexp>,
+these addresses can still receive email from RT otherwise.
+
+=cut
+
+Set($IgnoreCcRegexp, undef);
+
+=item C<$CanonicalizeEmailAddressMatch>, C<$CanonicalizeEmailAddressReplace>
+
+RT provides functionality which allows the system to rewrite
+incoming email addresses. In its simplest form,
+you can substitute the value in $<CanonicalizeEmailAddressReplace>
+for the value in $<CanonicalizeEmailAddressMatch>
+(These values are passed to the $<CanonicalizeEmailAddress> subroutine in
+ F<RT/User.pm>)
+
+By default, that routine performs a C<s/$Match/$Replace/gi> on any address
+passed to it.
+
+=cut
#Set($CanonicalizeEmailAddressMatch , '@subdomain\.example\.com$');
#Set($CanonicalizeEmailAddressReplace , '@example.com');
-# set this to true and the create new user page will use the values that you
-# enter in the form but use the function CanonicalizeUserInfo in User_Local.pm
-Set($CanonicalizeOnCreate , 0);
+=item C<$CanonicalizeEmailAddressMatch>
+
+Set this to true and the create new user page will use the values that you
+enter in the form but use the function CanonicalizeUserInfo in
+F<RT/User_Local.pm>
+
+=cut
+
+Set($CanonicalizeOnCreate, 0);
+
+=item C<$ValidateUserEmailAddresses>
+
+If C<$ValidateUserEmailAddresses> is true, RT will refuse to create users with
+an invalid email address (as specified in RFC 2822) or with an email address
+made of multiple email adresses.
+
+=cut
+
+Set($ValidateUserEmailAddresses, undef);
+
+=item C<$NonCustomerEmailRegexp>
+
+Normally, when a ticket is linked to a customer, any requestors on that
+ticket that didn't previously have customer memberships are linked to
+the customer also. C<$NonCustomerEmailRegexp> is a regexp for email
+addresses that should I<not> automatically be linked to a customer in
+this way.
+
+=cut
+
+Set($NonCustomerEmailRegexp, undef);
+
+=item C<@MailPlugins>
+
+C<@MailPlugins> is a list of auth plugins for L<RT::Interface::Email>
+to use; see L<rt-mailgate>
-# If $SenderMustExistInExternalDatabase is true, RT will refuse to
-# create non-privileged accounts for unknown users if you are using
-# the "LookupSenderInExternalDatabase" option.
-# Instead, an error message will be mailed and RT will forward the
-# message to $RTOwner.
-#
-# If you are not using $LookupSenderInExternalDatabase, this option
-# has no effect.
-#
-# If you define an AutoRejectRequest template, RT will use this
-# template for the rejection message.
+=cut
+
+=item C<$UnsafeEmailCommands>
+
+C<$UnsafeEmailCommands>, if set to true, enables 'take' and 'resolve'
+as possible actions via the mail gateway. As its name implies, this
+is very unsafe, as it allows email with a forged sender to possibly
+resolve arbitrary tickets!
+
+=cut
+
+=item C<$ExtractSubjectTagMatch>, C<$ExtractSubjectTagNoMatch>
+
+The default "extract remote tracking tags" scrip settings; these
+detect when your RT is talking to another RT, and adjusts the
+subject accordingly.
+
+=cut
-Set($SenderMustExistInExternalDatabase , undef);
+Set($ExtractSubjectTagMatch, qr/\[.+? #\d+\]/);
+Set($ExtractSubjectTagNoMatch, ( ${RT::EmailSubjectTagRegex}
+ ? qr/\[(?:${RT::EmailSubjectTagRegex}) #\d+\]/
+ : qr/\[\Q$RT::rtname\E #\d+\]/));
-# }}}
+=back
-# {{{ Outgoing mail configuration
+=head1 Outgoing Mail Configuration
-# RT is designed such that any mail which already has a ticket-id associated
-# with it will get to the right place automatically.
+=over 4
-# $CorrespondAddress and $CommentAddress are the default addresses
-# that will be listed in From: and Reply-To: headers of correspondence
-# and comment mail tracked by RT, unless overridden by a queue-specific
-# address.
+=item C<$MailCommand>
-Set($CorrespondAddress , 'RT_CorrespondAddressNotSet');
+C<$MailCommand> defines which method RT will use to try to send mail.
+We know that 'sendmailpipe' works fairly well. If 'sendmailpipe'
+doesn't work well for you, try 'sendmail'. Other options are 'smtp'
+or 'qmail'.
-Set($CommentAddress , 'RT_CommentAddressNotSet');
+Note that you should remove the '-t' from C<$SendmailArguments>
+if you use 'sendmail' rather than 'sendmailpipe'
-#Sendmail Configuration
+For testing purposes, or to simply disable sending mail out into the world, you
+can set C<$MailCommand> to 'testfile' which writes all mail to a temporary
+file. RT will log the location of the temporary file so you can extract mail
+from it afterwards.
-# $MailCommand defines which method RT will use to try to send mail
-# We know that 'sendmailpipe' works fairly well.
-# If 'sendmailpipe' doesn't work well for you, try 'sendmail'
-#
-# Note that you should remove the '-t' from $SendmailArguments
-# if you use 'sendmail' rather than 'sendmailpipe'
+=cut
Set($MailCommand , 'sendmailpipe');
-# $SendmailArguments defines what flags to pass to $Sendmail
-# assuming you picked 'sendmail' or 'sendmailpipe' as the $MailCommand above.
-# If you picked 'sendmailpipe', you MUST add a -t flag to $SendmailArguments
+=item C<$SetOutgoingMailFrom>
+
+C<$SetOutgoingMailFrom> tells RT to set the sender envelope with the correspond
+mail address of the ticket's queue.
+
+Warning: If you use this setting, bounced mails will appear to be incoming
+mail to the system, thus creating new tickets.
+
+=cut
+
+Set($SetOutgoingMailFrom, 0);
+
+=item C<$OverrideOutgoingMailFrom>
+
+C<$OverrideOutgoingMailFrom> is used for overwriting the Correspond
+address of the queue as it is handed to sendmail -f. This helps force
+the From_ header away from www-data or other email addresses that show
+up in the "Sent by" line in Outlook.
+
+The option is a hash reference of queue name to email address.
+
+If there is no ticket involved, then the value of the C<Default> key will be
+used.
+
+=cut
+
+Set($OverrideOutgoingMailFrom, {
+# 'Default' => 'admin@rt.example.com',
+# 'General' => 'general@rt.example.com',
+});
+
+=back
+
+=item C<$DefaultMailPrecedence>
+
+C<$DefaultMailPrecedence> is used to control the default
+Precedence level of outgoing mail where none is specified.
+By default it is C<bulk>, but if you only send mail to
+your staff, you may wish to change it.
+
+Note that you can set the precedence of individual templates
+by including an explicit Precedence header.
+
+If you set this value to C<undef> then we do not set a default
+Precedence header to outgoing mail. However, if there already is a
+Precedence header it will be preserved.
+
+=cut
+
+Set($DefaultMailPrecedence, 'bulk');
+
+=back
+
+=item C<$DefaultErrorMailPrecedence>
+
+C<$DefaultErrorMailPrecedence> is used to control the default
+Precedence level of outgoing mail that indicates some kind of
+error condition. By default it is C<bulk>, but if you only send
+mail to your staff, you may wish to change it.
+
+If you set this value to C<undef> then we do not add a Precedence
+header to error mail.
+
+=cut
+
+Set($DefaultErrorMailPrecedence, 'bulk');
+
+=back
+
+=item C<$UseOriginatorHeader>
+
+C<$UseOriginatorHeader> is used to control the insertion of an
+RT-Originator Header in every outgoing mail, containing the
+mail address of the transaction creator.
+
+=cut
+
+Set($UseOriginatorHeader, 1);
+
+=back
+
+=head1 Sendmail Configuration
+
+These options only take effect if C<$MailCommand> is 'sendmail' or
+'sendmailpipe'
+
+=over 4
+
+=item C<$SendmailArguments>
+
+C<$SendmailArguments> defines what flags to pass to C<$SendmailPath>
+If you picked 'sendmailpipe', you MUST add a -t flag to C<$SendmailArguments>
+These options are good for most sendmail wrappers and workalikes
+
+These arguments are good for sendmail brand sendmail 8 and newer
+C<Set($SendmailArguments,"-oi -t -ODeliveryMode=b -OErrorMode=m");>
+
+=cut
-# These options are good for most sendmail wrappers and workalikes
Set($SendmailArguments , "-oi -t");
-# $SendmailBounceArguments defines what flags to pass to $Sendmail
-# assuming RT needs to send an error (ie. bounce).
+
+=item C<$SendmailBounceArguments>
+
+C<$SendmailBounceArguments> defines what flags to pass to C<$Sendmail>
+assuming RT needs to send an error (ie. bounce).
+
+=cut
Set($SendmailBounceArguments , '-f "<>"');
-# These arguments are good for sendmail brand sendmail 8 and newer
-#Set($SendmailArguments,"-oi -t -ODeliveryMode=b -OErrorMode=m");
+=item C<$SendmailPath>
+
+If you selected 'sendmailpipe' above, you MUST specify the path to
+your sendmail binary in C<$SendmailPath>.
+
+=cut
-# If you selected 'sendmailpipe' above, you MUST specify the path
-# to your sendmail binary in $SendmailPath.
-# !! If you did not # select 'sendmailpipe' above, this has no effect!!
Set($SendmailPath , "/usr/sbin/sendmail");
-# By default, RT sets the outgoing mail's "From:" header to
-# "SenderName via RT". Setting this option to 0 disables it.
-Set($UseFriendlyFromLine , 1);
+=back
-# sprintf() format of the friendly 'From:' header; its arguments
-# are SenderName and SenderEmailAddress.
-Set($FriendlyFromLineFormat , "\"%s via RT\" <%s>");
+=head1 SMTP Configuration
-# RT can optionally set a "Friendly" 'To:' header when sending messages to
-# Ccs or AdminCcs (rather than having a blank 'To:' header.
+These options only take effect if C<$MailCommand> is 'smtp'
-# This feature DOES NOT WORK WITH SENDMAIL[tm] BRAND SENDMAIL
-# If you are using sendmail, rather than postfix, qmail, exim or some other MTA,
-# you _must_ disable this option.
+=over 4
-Set($UseFriendlyToLine , 0);
+=item C<$SMTPServer>
-# sprintf() format of the friendly 'From:' header; its arguments
-# are WatcherType and TicketId.
-Set($FriendlyToLineFormat, "\"%s of $RT::rtname Ticket #%s\":;");
+C<$SMTPServer> should be set to the hostname of the SMTP server to use
-# By default, RT doesn't notify the person who performs an update, as they
-# already know what they've done. If you'd like to change this behaviour,
-# Set $NotifyActor to 1
+=cut
-Set($NotifyActor, 0);
+Set($SMTPServer, undef);
-# By default, RT records each message it sends out to its own internal database.# To change this behaviour, set $RecordOutgoingEmail to 0
+=item C<$SMTPFrom>
-Set($RecordOutgoingEmail, 1);
+C<$SMTPFrom> should be set to the 'From' address to use, if not the
+email's 'From'
-# VERP support (http://cr.yp.to/proto/verp.txt)
-# uncomment the following two directives to generate envelope senders
-# of the form ${VERPPrefix}${originaladdress}@${VERPDomain}
-# (i.e. rt-jesse=fsck.com@rt.example.com ) This currently only works
-# with sendmail and sendmailppie.
-# Set($VERPPrefix, 'rt-');
-# Set($VERPDomain, $RT::Organization);
+=cut
-# }}}
+Set($SMTPFrom, undef);
-# {{{ Logging
+=item C<$SMTPDebug>
-# Logging. The default is to log anything except debugging
-# information to syslog. Check the Log::Dispatch POD for
-# information about how to get things by syslog, mail or anything
-# else, get debugging info in the log, etc.
+C<$SMTPDebug> should be set to true to debug SMTP mail sending
-# It might generally make
-# sense to send error and higher by email to some administrator.
-# If you do this, be careful that this email isn't sent to this RT instance.
+=cut
-# the minimum level error that will be logged to the specific device.
-# levels from lowest to highest:
-# debug info notice warning error critical alert emergency
+Set($SMTPDebug, 0);
-# Mail loops will generate a critical log message.
-Set($LogToSyslog , 'debug');
-Set($LogToScreen , 'error');
-Set($LogToFile , undef);
-Set($LogDir, '@RT_LOG_PATH@');
-Set($LogToFileNamed , "rt.log"); #log to rt.log
+=back
-# If true generates stack traces to file log or screen
-# never generates traces to syslog
+=head1 Other Mailer Configuration
-Set($LogStackTraces , 0);
+=over 4
-# On Solaris or UnixWare, set to ( socket => 'inet' ). Options here
-# override any other options RT passes to Log::Dispatch::Syslog.
-# Other interesting flags include facility and logopt. (See the
-# Log::Dispatch::Syslog documentation for more information.) (Maybe
-# ident too, if you have multiple RT installations.)
+=item C<@MailParams>
-@LogToSyslogConf = () unless (@LogToSyslogConf);
+C<@MailParams> defines a list of options passed to $MailCommand if it
+is not 'sendmailpipe', 'sendmail', or 'smtp'
-# RT has rudimentary SQL statement logging support if you have
-# DBIx-SearchBuilder 1.31_1 or higher; simply set $StatementLog to be
-# the level that you wish SQL statements to be logged at.
-Set($StatementLog, undef);
+=cut
-# }}}
+Set(@MailParams, ());
-# {{{ Web interface configuration
+=item C<$CorrespondAddress>, C<$CommentAddress>
-# This determines the default stylesheet the RT web interface will use.
-# RT ships with two valid values by default:
-#
-# 3.5-default The totally new, default layout for RT 3.5
-# 3.4-compat A 3.4 compatibility stylesheet to make RT 3.5 look
-# (mostly) like 3.4
-#
-# This value actually specifies a directory in share/html/NoAuth/css/
-# from which RT will try to load the file main.css (which should
-# @import any other files the stylesheet needs). This allows you to
-# easily and cleanly create your own stylesheets to apply to RT.
+RT is designed such that any mail which already has a ticket-id associated
+with it will get to the right place automatically.
-Set($WebDefaultStylesheet, '3.5-default');
+C<$CorrespondAddress> and C<$CommentAddress> are the default addresses
+that will be listed in From: and Reply-To: headers of correspondence
+and comment mail tracked by RT, unless overridden by a queue-specific
+address.
-# Define the directory name to be used for images in rt web
-# documents.
+=cut
-# If you're putting the web ui somewhere other than at the root of
-# your server, you should set $WebPath to the path you'll be
-# serving RT at.
-# $WebPath requires a leading / but no trailing /.
-#
-# In most cases, you should leave $WebPath set to '' (an empty value).
+Set($CorrespondAddress , '');
-Set($WebPath , "");
+Set($CommentAddress , '');
-# If we're running as a superuser, run on port 80
-# Otherwise, pick a high port for this user.
+=item C<$DashboardAddress>
-Set($WebPort , 80);# + ($< * 7274) % 32766 + ($< && 1024));
+The email address from which RT will send dashboards. If none is set, then
+C<$OwnerEmail> will be used.
-# This is the Scheme, server and port for constructing urls to webrt
-# $WebBaseURL doesn't need a trailing /
+=cut
-Set($WebBaseURL , "http://localhost:$WebPort");
+Set($DashboardAddress, '');
-Set($WebURL , $WebBaseURL . $WebPath . "/");
+=item C<$UseFriendlyFromLine>
-# $WebImagesURL points to the base URL where RT can find its images.
+By default, RT sets the outgoing mail's "From:" header to
+"SenderName via RT". Setting C<$UseFriendlyFromLine> to 0 disables it.
-Set($WebImagesURL , $WebPath . "/NoAuth/images/");
+=cut
-# $LogoURL points to the URL of the RT logo displayed in the web UI
+Set($UseFriendlyFromLine, 1);
-Set($LogoURL , $WebImagesURL . "bplogo.gif");
+=item C<$FriendlyFromLineFormat>
-# WebNoAuthRegex - What portion of RT's URLspace should not require
-# authentication.
-Set($WebNoAuthRegex, qr!^(?:/+NoAuth/|
- /+REST/\d+\.\d+/NoAuth/)!x );
+C<sprintf()> format of the friendly 'From:' header; its arguments
+are SenderName and SenderEmailAddress.
-# For message boxes, set the entry box width and what type of wrapping
-# to use.
-#
-# Default width: 72
-Set($MessageBoxWidth , 72);
+=cut
-# Default wrapping: "HARD" (choices "SOFT", "HARD")
-Set($MessageBoxWrap, "HARD");
+Set($FriendlyFromLineFormat, "\"%s via RT\" <%s>");
-# Support implicit links in WikiText custom fields? A true value
-# causes InterCapped or ALLCAPS words in WikiText fields to
-# automatically become links to searches for those words. If used on
-# RTFM articles, it links to the RTFM article with that name.
-Set($WikiImplicitLinks, 0);
+=item C<$UseFriendlyToLine>
-# if TrustHTMLAttachments is not defined, we will display them
-# as text. This prevents malicious HTML and javascript from being
-# sent in a request (although there is probably more to it than that)
-Set($TrustHTMLAttachments , undef);
-
-# Should RT redistribute correspondence that it identifies as
-# machine generated? A true value will do so; setting this to '0'
-# will cause no such messages to be redistributed.
-# You can also use 'privileged' (the default), which will redistribute
-# only to privileged users. This helps to protect against malformed
-# bounces and loops caused by autocreated requestors with bogus addresses.
-Set($RedistributeAutoGeneratedMessages, 'privileged');
+RT can optionally set a "Friendly" 'To:' header when sending messages to
+Ccs or AdminCcs (rather than having a blank 'To:' header.
-# If PreferRichText is set to a true value, RT will show HTML/Rich text
-# messages in preference to their plaintext alternatives. RT "scrubs" the
-# html to show only a minimal subset of HTML to avoid possible contamination
-# by cross-site-scripting attacks.
-Set($PreferRichText, undef);
+This feature DOES NOT WORK WITH SENDMAIL[tm] BRAND SENDMAIL
+If you are using sendmail, rather than postfix, qmail, exim or some other MTA,
+you _must_ disable this option.
-# If $WebExternalAuth is defined, RT will defer to the environment's
-# REMOTE_USER variable.
+=cut
-Set($WebExternalAuth , undef);
+Set($UseFriendlyToLine, 0);
-# If $WebFallbackToInternalAuth is undefined, the user is allowed a chance
-# of fallback to the login screen, even if REMOTE_USER failed.
+=item C<$FriendlyToLineFormat>
-Set($WebFallbackToInternalAuth , undef);
+C<sprintf()> format of the friendly 'To:' header; its arguments
+are WatcherType and TicketId.
-# $WebExternalGecos means to match 'gecos' field as the user identity);
-# useful with mod_auth_pwcheck and IIS Integrated Windows logon.
+=cut
-Set($WebExternalGecos , undef);
+Set($FriendlyToLineFormat, "\"%s of ". RT->Config->Get('rtname') ." Ticket #%s\":;");
-# $WebExternalAuto will create users under the same name as REMOTE_USER
-# upon login, if it's missing in the Users table.
+=item C<$NotifyActor>
-Set($WebExternalAuto , undef);
+By default, RT doesn't notify the person who performs an update, as they
+already know what they've done. If you'd like to change this behaviour,
+Set C<$NotifyActor> to 1
-# $WebSessionClass is the class you wish to use for managing Sessions.
-# It defaults to use your SQL database, but if you are using MySQL 3.x and
-# plans to use non-ascii Queue names, uncomment and add this line to
-# RT_SiteConfig.pm will prevent session corruption.
+=cut
-# Set($WebSessionClass , 'Apache::Session::File');
+Set($NotifyActor, 0);
+=item C<$RecordOutgoingEmail>
-# By default, RT's session cookie isn't marked as "secure" Some web browsers
-# will treat secure cookies more carefully than non-secure ones, being careful
-# not to write them to disk, only send them over an SSL secured connection
-# and so on. To enable this behaviour, set # $WebSecureCookies to a true value.
-# NOTE: You probably don't want to turn this on _unless_ users are only connecting
-# via SSL encrypted HTTP connections.
+By default, RT records each message it sends out to its own internal database.
+To change this behavior, set C<$RecordOutgoingEmail> to 0
-Set($WebSecureCookies, 0);
+=cut
+Set($RecordOutgoingEmail, 1);
-# By default, RT clears its database cache after every page view.
-# This ensures that you've always got the most current information
-# when working in a multi-process (mod_perl or FastCGI) Environment
-# Setting $WebFlushDbCacheEveryRequest to '0' will turn this off,
-# which will speed RT up a bit, at the expense of a tiny bit of data
-# accuracy.
+=item C<$VERPPrefix>, C<$VERPPrefix>
-Set($WebFlushDbCacheEveryRequest, '1');
+VERP support (http://cr.yp.to/proto/verp.txt)
+uncomment the following two directives to generate envelope senders
+of the form C<${VERPPrefix}${originaladdress}@${VERPDomain}>
+(i.e. rt-jesse=fsck.com@rt.example.com ).
-# $MaxInlineBody is the maximum attachment size that we want to see
-# inline when viewing a transaction. 13456 is a random sane-sounding
-# default.
+This currently only works with sendmail and sendmailppie.
-Set($MaxInlineBody, 13456);
+=cut
-# $DefaultSummaryRows is default number of rows displayed in for search
-# results on the frontpage.
+# Set($VERPPrefix, 'rt-');
+# Set($VERPDomain, $RT::Organization);
-Set($DefaultSummaryRows, 10);
-# By default, RT shows newest transactions at the bottom of the ticket
-# history page, if you want see them at the top set this to '0'.
+=item C<$ForwardFromUser>
-Set($OldestTransactionsFirst, '1');
+By default, RT forwards a message using queue's address and adds RT's tag into
+subject of the outgoing message, so recipients' replies go into RT as correspondents.
-# By default, RT shows images attached to incoming (and outgoing) ticket updates
-# inline. Set this variable to 0 if you'd like to disable that behaviour
+To change this behavior, set C<$ForwardFromUser> to true value and RT will use
+address of the current user and leave subject without RT's tag.
-Set($ShowTransactionImages, 1);
+=cut
+Set($ForwardFromUser, 0);
-# $HomepageComponents is an arrayref of allowed components on a user's
-# customized homepage ("RT at a glance").
+=item C<$ShowBccHeader>
-Set($HomepageComponents, [qw(QuickCreate Quicksearch MyAdminQueues MySupportQueues MyReminders RefreshHomepage)]);
+By default RT hides from the web UI information about blind copies user sent on
+reply or comment.
-# @MasonParameters is the list of parameters for the constructor of
-# HTML::Mason's Apache or CGI Handler. This is normally only useful
-# for debugging, eg. profiling individual components with:
-# use MasonX::Profiler; # available on CPAN
-# @MasonParameters = (preamble => 'my $p = MasonX::Profiler->new($m, $r);');
+To change this set the following option to true value.
-@MasonParameters = () unless (@MasonParameters);
+=cut
-# $DefaultSearchResultFormat is the default format for RT search results
-Set ($DefaultSearchResultFormat, qq{
- '<B><A HREF="$RT::WebPath/Ticket/Display.html?id=__id__">__id__</a></B>/TITLE:#',
- '<B><A HREF="$RT::WebPath/Ticket/Display.html?id=__id__">__Subject__</a></B>/TITLE:Subject',
- Status,
- QueueName,
- OwnerName,
- Priority,
- '__NEWLINE__',
- '',
- '<small>__Requestors__</small>',
- '<small>__CreatedRelative__</small>',
- '<small>__ToldRelative__</small>',
- '<small>__LastUpdatedRelative__</small>',
- '<small>__TimeLeft__</small>'});
+Set($ShowBccHeader, 0);
-# If $SuppressInlineTextFiles is set to a true value, then uploaded
-# text files (text-type attachments with file names) are prevented
-# from being displayed in-line when viewing a ticket's history.
+=item C<$DashboardSubject>
-Set($SuppressInlineTextFiles, undef);
+Lets you set the subject of dashboards. Arguments are the frequency (Daily,
+Weekly, Monthly) of the dashboard and the dashboard's name. [_1] for the name
+of the dashboard.
-# If $DontSearchFileAttachments is set to a true value, then uploaded
-# files (attachments with file names) are not searched during full-content
-# ticket searches.
+=cut
-Set($DontSearchFileAttachments, undef);
+Set($DashboardSubject, '%s Dashboard: %s');
-# The GD module (which RT uses for graphs) uses a builtin font that doesn't
-# have full Unicode support. You can use a particular TrueType font by setting
-# $ChartFont to the absolute path of that font. Your GD library must have
-# support for TrueType fonts to use this option.
+=back
-Set($ChartFont, undef);
+=head1 GnuPG Configuration
+A full description of the (somewhat extensive) GnuPG integration can be found
+by running the command `perldoc L<RT::Crypt::GnuPG>` (or `perldoc
+ lib/RT/Crypt/GnuPG.pm` from your RT install directory).
-# }}}
+=over 4
-# {{{ RT UTF-8 Settings
+=item C<%GnuPG>
-# An array that contains languages supported by RT's internationalization
-# interface. Defaults to all *.po lexicons; setting it to qw(en ja) will make
-# RT bilingual instead of multilingual, but will save some memory.
+Set C<OutgoingMessagesFormat> to 'inline' to use inline encryption and
+signatures instead of 'RFC' (GPG/MIME: RFC3156 and RFC1847) format.
-@LexiconLanguages = qw(*) unless (@LexiconLanguages);
+If you want to allow people to encrypt attachments inside the DB then
+set C<AllowEncryptDataInDB> to true
-# An array that contains default encodings used to guess which charset
-# an attachment uses if not specified. Must be recognized by
-# Encode::Guess.
+Set C<RejectOnMissingPrivateKey> to false if you don't want to reject
+emails encrypted for key RT doesn't have and can not decrypt.
-@EmailInputEncodings = qw(utf-8 iso-8859-1 us-ascii) unless (@EmailInputEncodings);
+Set C<RejectOnBadData> to false if you don't want to reject letters
+with incorrect GnuPG data.
-# The charset for localized email. Must be recognized by Encode.
+=cut
-Set($EmailOutputEncoding , 'utf-8');
+Set( %GnuPG,
+ Enable => @RT_GPG@,
+ OutgoingMessagesFormat => 'RFC', # Inline
+ AllowEncryptDataInDB => 0,
-# }}}
+ RejectOnMissingPrivateKey => 1,
+ RejectOnBadData => 1,
+);
-# {{{ RT Date Handling Options (for Time::ParseDate)
+=item C<%GnuPGOptions>
-# Set this to 1 if your local date convention looks like "dd/mm/yy"
-# instead of "mm/dd/yy".
+Options of GnuPG program.
-Set($DateDayBeforeMonth , 1);
+If you override this in your RT_SiteConfig, you should be sure
+to include a homedir setting.
-# Should "Tuesday" default to meaning "Next Tuesday" or "Last Tuesday"?
-# Set to 0 for "Next" or 1 for "Last".
+NOTE that options with '-' character MUST be quoted.
-Set($AmbiguousDayInPast , 1);
+=cut
-# }}}
+Set(%GnuPGOptions,
+ homedir => '@RT_VAR_PATH@/data/gpg',
-# {{{ Miscellaneous RT Settings
+# URL of a keyserver
+# keyserver => 'hkp://subkeys.pgp.net',
-# You can define new statuses and even reorder existing statuses here.
-# WARNING. DO NOT DELETE ANY OF THE DEFAULT STATUSES. If you do, RT
-# will break horribly. The statuses you add must be no longer than
-# 10 characters.
+# enables the automatic retrieving of keys when encrypting
+# 'auto-key-locate' => 'keyserver',
-@ActiveStatus = qw(new open stalled) unless @ActiveStatus;
-@InactiveStatus = qw(resolved rejected deleted) unless @InactiveStatus;
+# enables the automatic retrieving of keys when verifying signatures
+# 'auto-key-retrieve' => undef,
+);
-# Backward compatability setting. Add/Delete Link used to record one
-# transaction and run one scrip. Set this value to 1 if you want
-# only one of the link transactions to have scrips run.
-Set($LinkTransactionsRun1Scrip , 0);
-# When this feature is enabled an user need ModifyTicket right on both
-# tickets to link them together, otherwise he can have right on any of
-# two.
-Set($StrictLinkACL, 1);
+=back
-# }}}
+=head1 Logging Configuration
+The default is to log anything except debugging
+information to syslog. Check the L<Log::Dispatch> POD for
+information about how to get things by syslog, mail or anything
+else, get debugging info in the log, etc.
-# {{{ Development Mode
-#
-# RT comes with a "Development mode" setting.
-# This setting, as a convenience for developers, turns on
-# all sorts of development options that you most likely don't want in
-# production:
-#
-# * Turns off Mason's 'static_source' directive. By default, you can't
-# edit RT's web ui components on the fly and have RT magically pick up
-# your changes. (It's a big performance hit)
-#
-# * More to come
-#
+It might generally make sense to send error and higher by email to
+some administrator. If you do this, be careful that this email
+isn't sent to this RT instance. Mail loops will generate a critical
+log message.
-Set($DevelMode, '@RT_DEVEL_MODE@');
+=over 4
+
+=item C<$LogToSyslog>, C<$LogToScreen>
+
+The minimum level error that will be logged to the specific device.
+From lowest to highest priority, the levels are:
+ debug info notice warning error critical alert emergency
+
+=cut
+
+Set($LogToSyslog , 'info');
+Set($LogToScreen , 'info');
+
+=item C<$LogToFile>, C<$LogDir>, C<$LogToFileNamed>
+
+Logging to a standalone file is also possible, but note that the
+file should needs to both exist and be writable by all direct users
+of the RT API. This generally include the web server, whoever
+rt-crontool runs as. Note that as rt-mailgate and the RT CLI go
+through the webserver, so their users do not need to have write
+permissions to this file. If you expect to have multiple users of
+the direct API, Best Practical recommends using syslog instead of
+direct file logging.
-# }}}
+=cut
+Set($LogToFile , undef);
+Set($LogDir, '@RT_LOG_PATH@');
+Set($LogToFileNamed , "rt.log"); #log to rt.log
+
+=item C<$LogStackTraces>
+
+If set to a log level then logging will include stack traces for
+messages with level equal to or greater than specified.
+
+NOTICE: Stack traces include parameters supplied to functions or
+methods. It is possible for stack trace logging to reveal sensitive
+information such as passwords or ticket content in your logs.
+
+=cut
+
+Set($LogStackTraces, '');
+
+=item C<@LogToSyslogConf>
+
+On Solaris or UnixWare, set to ( socket => 'inet' ). Options here
+override any other options RT passes to L<Log::Dispatch::Syslog>.
+Other interesting flags include facility and logopt. (See the
+L<Log::Dispatch::Syslog> documentation for more information.) (Maybe
+ident too, if you have multiple RT installations.)
+
+=cut
+
+Set(@LogToSyslogConf, ());
+
+=item C<$StatementLog>,
+
+RT has rudimentary SQL statement logging support if you have
+DBIx-SearchBuilder 1.31_1 or higher; simply set C<$StatementLog> to be
+the level that you wish SQL statements to be logged at.
+
+=cut
+
+Set($StatementLog, undef);
+
+=back
+
+=head1 Web Interface Configuration
+
+=over 4
+
+=item C<$WebDefaultStylesheet>
+
+This determines the default stylesheet the RT web interface will use.
+RT ships with several themes by default:
+
+ web2 The totally new, default layout for RT 3.8
+ 3.5-default RT 3.5 and 3.6 original layout
+ 3.4-compat A 3.4 compatibility stylesheet to make RT look
+ (mostly) like 3.4
+
+This bundled distibution of RT also includes (enabled by default):
+ freeside2.1 Integration with Freeside
+
+This value actually specifies a directory in F<share/html/NoAuth/css/>
+from which RT will try to load the file main.css (which should
+@import any other files the stylesheet needs). This allows you to
+easily and cleanly create your own stylesheets to apply to RT. This
+option can be overridden by users in their preferences.
+
+=cut
+
+Set($WebDefaultStylesheet, 'freeside2.1');
+
+=item C<$UsernameFormat>
+
+This determines how user info is displayed. 'concise' will show one of
+either NickName, RealName, Name or EmailAddress, depending on what exists
+and whether the user is privileged or not. 'verbose' will show RealName and
+EmailAddress.
+
+=cut
+
+Set($UsernameFormat, 'verbose');
+
+=item C<$WebDomain>
+
+Domain name of the RT server, eg 'www.example.com'. It should not contain
+anything else, but server name.
+
+=cut
+
+Set( $WebDomain, 'localhost' );
+
+=item C<$WebPort>
+
+If we're running as a superuser, run on port 80
+Otherwise, pick a high port for this user.
+
+443 is default port for https protocol.
+
+=cut
+
+Set($WebPort, 80);# + ($< * 7274) % 32766 + ($< && 1024));
+
+=item C<$WebPath>
+
+If you're putting the web ui somewhere other than at the root of
+your server, you should set C<$WebPath> to the path you'll be
+serving RT at.
+
+C<$WebPath> requires a leading / but no trailing /, or it can be blank.
+
+In most cases, you should leave C<$WebPath> set to '' (an empty value).
+
+=cut
+
+Set($WebPath, "");
+
+=item C<$WebBaseURL>, C<$WebURL>
+
+Usually you don't want to set these options. The only obviouse reason is
+RT accessible via https protocol on non standard port, eg
+'https://rt.example.com:9999'. In all other cases these options are computed
+using C<$WebDomain>, C<$WebPort> and C<$WebPath>.
+
+C<$WebBaseURL> is the scheme, server and port (eg 'http://rt.example.com')
+for constructing urls to the web UI. C<$WebBaseURL> doesn't need a trailing /.
+
+C<$WebURL> is the C<$WebBaseURL>, C<$WebPath> and trailing /, for example:
+'http://www.example.com/rt/'.
+
+=cut
+
+my $port = RT->Config->Get('WebPort');
+Set($WebBaseURL,
+ ($port == 443? 'https': 'http') .'://'
+ . RT->Config->Get('WebDomain')
+ . ($port != 80 && $port != 443? ":$port" : '')
+);
+
+Set($WebURL, RT->Config->Get('WebBaseURL') . RT->Config->Get('WebPath') . "/");
+
+=item C<$WebImagesURL>
+
+C<$WebImagesURL> points to the base URL where RT can find its images.
+Define the directory name to be used for images in rt web
+documents.
+
+=cut
+
+Set($WebImagesURL, RT->Config->Get('WebPath') . "/NoAuth/images/");
+
+=item C<$LogoURL>
+
+C<$LogoURL> points to the URL of the RT logo displayed in the web UI
+
+=cut
+
+Set($LogoURL, RT->Config->Get('WebImagesURL') . "bplogo.gif");
+
+=item C<$LogoLinkURL>
+
+C<$LogoLinkURL> is the URL that the RT logo hyperlinks to.
+
+=cut
+
+Set($LogoLinkURL, "http://bestpractical.com");
+
+=item C<$LogoAltText>
+
+C<$LogoAltText> is a string of text for the alt-text of the logo. It
+will be passed through C<loc> for localization.
+
+=cut
+
+Set($LogoAltText, "Best Practical Solutions, LLC corporate logo");
+
+=item C<$LogoImageHeight>
+
+C<$LogoImageHeight> is the value of the C<height> attribute of the logo
+C<img> tag.
+
+=cut
+
+Set($LogoImageHeight, 33);
+
+=item C<$LogoImageWidth>
+
+C<$LogoImageWidth> is the value of the C<width> attribute of the logo
+C<img> tag.
+
+=cut
+
+Set($LogoImageWidth, 177);
+
+=item C<$WebNoAuthRegex>
+
+What portion of RT's URL space should not require authentication.
+
+This is mostly for extension and doesn't mean RT will work without
+login if you change it.
+
+=cut
+
+Set($WebNoAuthRegex, qr{^ /rt (?:/+NoAuth/ | /+REST/\d+\.\d+/NoAuth/) }x );
+
+=item C<$SelfServiceRegex>
+
+What portion of RT's URLspace should be accessible to Unprivileged users
+This does not override the redirect from F</Ticket/Display.html> to
+F</SelfService/Display.html> when Unprivileged users attempt to access
+ticked displays
+
+=cut
+
+Set($SelfServiceRegex, qr!^(?:/+SelfService/)!x );
+
+=item C<$MessageBoxWidth>, C<$MessageBoxHeight>
+
+For message boxes, set the entry box width, height and what type of
+wrapping to use. These options can be overridden by users in their
+preferences.
+
+Default width: 72, height: 15
+
+These settings only apply to the non-RichText message box.
+See below for Rich Text settings.
+
+=cut
+
+Set($MessageBoxWidth, 72);
+Set($MessageBoxHeight, 15);
+
+=item C<$MessageBoxWrap>
+
+Default wrapping: "HARD" (choices "SOFT", "HARD")
+
+Wrapping is disabled when using MessageBoxRichText because
+of a bad interaction between IE and wrapping with the Rich
+Text Editor.
+
+=cut
+
+Set($MessageBoxWrap, "HARD");
+
+=item C<$MessageBoxRichText>
+
+Should "rich text" editing be enabled? This option lets your users send html email messages from the web interface.
+
+=cut
+
+Set($MessageBoxRichText, 1);
+
+=item C<$MessageBoxRichTextHeight>
+
+Height of RichText javascript enabled editing boxes (in pixels)
+
+=cut
+
+Set($MessageBoxRichTextHeight, 200);
+
+=item C<$MessageBoxIncludeSignature>
+
+Should your user's signatures (from their Preferences page) be included in Comments and Replies
+
+=cut
+
+Set($MessageBoxIncludeSignature, 1);
+
+=item C<$MessageBoxIncludeSignatureOnComment>
+
+Should your user's signatures (from their Preferences page) be included in Comments. Setting this to false overrides C<$MessageBoxIncludeSignature>.
+
+=cut
+
+Set($MessageBoxIncludeSignatureOnComment, 1);
+
+=item C<$WikiImplicitLinks>
+
+Support implicit links in WikiText custom fields? A true value
+causes InterCapped or ALLCAPS words in WikiText fields to
+automatically become links to searches for those words. If used on
+RTFM articles, it links to the RTFM article with that name.
+
+=cut
+
+Set($WikiImplicitLinks, 0);
+
+=item C<$TrustHTMLAttachments>
+
+if C<TrustHTMLAttachments> is not defined, we will display them
+as text. This prevents malicious HTML and javascript from being
+sent in a request (although there is probably more to it than that)
+
+=cut
+
+Set($TrustHTMLAttachments, undef);
+
+=item C<$AlwaysDownloadAttachments>
+
+Always download attachments, regardless of content type. If set,
+this overrides C<TrustHTMLAttachments>.
+
+=cut
+
+Set($AlwaysDownloadAttachments, undef);
+
+=item C<$AttachmentUnits>
+
+Controls the units (kilobytes or bytes) that attachment sizes use
+for display. The default is to display kilobytes if the attachment
+is larger than 1024 bytes, bytes otherwise. If you set
+C<$AttachmentUnits> to C<'k'> then attachment sizes will always be
+displayed in kilobytes. If set to C<'b'>, then sizes will be bytes.
+
+=cut
+
+Set($AttachmentUnits, undef);
+
+=item C<$EditCustomFieldsSingleColumn>
+
+When displaying a list of Ticket Custom Fields for editing, RT defaults
+to a 2 column list. If you set this to 1, it will instead display the
+Custom Fields in a single column.
+
+=cut
+
+Set($EditCustomFieldsSingleColumn, 0);
+
+=item C<$RedistributeAutoGeneratedMessages>
+
+Should RT redistribute correspondence that it identifies as
+machine generated? A true value will do so; setting this to '0'
+will cause no such messages to be redistributed.
+You can also use 'privileged' (the default), which will redistribute
+only to privileged users. This helps to protect against malformed
+bounces and loops caused by autocreated requestors with bogus addresses.
+
+=cut
+
+Set($RedistributeAutoGeneratedMessages, 'privileged');
+
+=item C<$PreferRichText>
+
+If C<$PreferRichText> is set to a true value, RT will show HTML/Rich text
+messages in preference to their plaintext alternatives. RT "scrubs" the
+html to show only a minimal subset of HTML to avoid possible contamination
+by cross-site-scripting attacks.
+
+=cut
+
+Set($PreferRichText, undef);
+
+=item C<$WebExternalAuth>
+
+If C<$WebExternalAuth> is defined, RT will defer to the environment's
+REMOTE_USER variable.
+
+=cut
+
+Set($WebExternalAuth, undef);
+
+=item C<$WebExternalAuthContinuous>
+
+If C<$WebExternalAuthContinuous> is defined, RT will check for the
+REMOTE_USER on each access. If you would prefer this to only happen
+once (at initial login) set this to a false value. The default setting
+will help ensure that if your external auth system deauthenticates a
+user, RT notices as soon as possible.
+
+=cut
+
+Set($WebExternalAuthContinuous, 1);
+
+=item C<$WebFallbackToInternalAuth>
+
+If C<$WebFallbackToInternalAuth> is defined, the user is allowed a chance
+of fallback to the login screen, even if REMOTE_USER failed.
+
+=cut
+
+Set($WebFallbackToInternalAuth , undef);
+
+=item C<$WebExternalGecos>
+
+C<$WebExternalGecos> means to match 'gecos' field as the user identity);
+useful with mod_auth_pwcheck and IIS Integrated Windows logon.
+
+=cut
+
+Set($WebExternalGecos , undef);
+
+=item C<$WebExternalAuto>
+
+C<$WebExternalAuto> will create users under the same name as REMOTE_USER
+upon login, if it's missing in the Users table.
+
+=cut
+
+Set($WebExternalAuto , undef);
+
+=item C<$AutoCreate>
+
+If C<$WebExternalAuto> is true, C<$AutoCreate> will be passed to User's
+Create method. Use it to set defaults, such as creating
+Unprivileged users with C<{ Privileged => 0 }>
+( Must be a hashref of arguments )
+
+=cut
+
+Set($AutoCreate, undef);
+
+=item C<$WebSessionClass>
+
+C<$WebSessionClass> is the class you wish to use for managing Sessions.
+It defaults to use your SQL database, but if you are using MySQL 3.x and
+plans to use non-ascii Queue names, uncomment and add this line to
+F<RT_SiteConfig.pm> will prevent session corruption.
+
+=cut
+
+# Set($WebSessionClass , 'Apache::Session::File');
+
+=item C<$AutoLogoff>
+
+By default, RT's user sessions persist until a user closes his or her
+browser. With the C<$AutoLogoff> option you can setup session lifetime in
+minutes. A user will be logged out if he or she doesn't send any requests
+to RT for the defined time.
+
+=cut
+
+Set($AutoLogoff, 0);
+
+=item C<$LogoutRefresh>
+
+The number of seconds to wait after logout before sending the user to the
+login page. By default, 1 second, though you may want to increase this if
+you display additional information on the logout page.
+
+=cut
+
+Set($LogoutRefresh, 1);
+
+=item C<$WebSecureCookies>
+
+By default, RT's session cookie isn't marked as "secure" Some web browsers
+will treat secure cookies more carefully than non-secure ones, being careful
+not to write them to disk, only send them over an SSL secured connection
+and so on. To enable this behaviour, set C<$WebSecureCookies> to a true value.
+NOTE: You probably don't want to turn this on _unless_ users are only connecting
+via SSL encrypted HTTP connections.
+
+=cut
+
+Set($WebSecureCookies, 0);
+
+=item C<$WebFlushDbCacheEveryRequest>
+
+By default, RT clears its database cache after every page view.
+This ensures that you've always got the most current information
+when working in a multi-process (mod_perl or FastCGI) Environment
+Setting C<$WebFlushDbCacheEveryRequest> to '0' will turn this off,
+which will speed RT up a bit, at the expense of a tiny bit of data
+accuracy.
+
+=cut
+
+Set($WebFlushDbCacheEveryRequest, '1');
+
+
+=item C<$MaxInlineBody>
+
+C<$MaxInlineBody> is the maximum attachment size that we want to see
+inline when viewing a transaction. RT will inline any text if value
+is undefined or 0. This option can be overridden by users in their
+preferences.
+
+=cut
+
+Set($MaxInlineBody, 12000);
+
+=item C<$DefaultSummaryRows>
+
+C<$DefaultSummaryRows> is default number of rows displayed in for search
+results on the frontpage.
+
+=cut
+
+Set($DefaultSummaryRows, 10);
+
+=item C<$HomePageRefreshInterval>
+
+C<$HomePageRefreshInterval> is default number of seconds to refresh the RT
+home page. Choose from [0, 120, 300, 600, 1200, 3600, 7200].
+
+=cut
+
+Set($HomePageRefreshInterval, 0);
+
+=item C<$SearchResultsRefreshInterval>
+
+C<$SearchResultsRefreshInterval> is default number of seconds to refresh
+search results in RT. Choose from [0, 120, 300, 600, 1200, 3600, 7200].
+
+=cut
+
+Set($SearchResultsRefreshInterval, 0);
+
+=item C<$ResolveDefaultUpdateType>
+
+Set the default Update Type when clicking the Resolve link in the Ticket
+links tab.
+
+ Comment Comments (Not sent to requestors)
+ Respond Reply to requestors
+
+=cut
+
+Set($ResolveDefaultUpdateType, 'Comment');
+
+=item C<$SuppressAutoOpenOnUpdate>
+
+When users click Comment or Reply on a new ticket in the web UI, the default
+status for the ticket gets set to 'open' if the status is currently 'new'.
+Setting this option to 1 will suppress that behavior and leave the default
+status as 'new'. This option can be overridden by users in their preferences.
+
+=cut
+
+Set($SuppressAutoOpenOnUpdate, 0);
+
+=item C<$OldestTransactionsFirst>
+
+By default, RT shows newest transactions at the bottom of the ticket
+history page, if you want see them at the top set this to '0'. This
+option can be overridden by users in their preferences.
+
+=cut
+
+Set($OldestTransactionsFirst, '1');
+
+=item C<$ShowTransactionImages>
+
+By default, RT shows images attached to incoming (and outgoing) ticket updates
+inline. Set this variable to 0 if you'd like to disable that behaviour
+
+=cut
+
+Set($ShowTransactionImages, 1);
+
+=item C<$PlainTextPre>
+
+Normally plaintext attachments are displayed as HTML with line
+breaks preserved. This causes space- and tab-based formatting not
+to be displayed correctly. By setting $PlainTextPre they'll be
+displayed using <pre> instead so such formatting works, but they'll
+use a monospaced font, no matter what the value of C<$PlainTextMono> is.
+
+=cut
+
+Set($PlainTextPre, 0);
+
+
+=item C<$PlainTextMono>
+To display plaintext attachments,
+Set C<$PlainTextMono> to 1 to use monospaced font and preserve
+formatting, but unlike PlainTextPre, the text will wrap to fit into the
+UI.
+
+=cut
+
+Set($PlainTextMono, 0);
+
+=item C<$ShowUnreadMessageNotifications>
+
+By default, RT will prompt users when there are new, unread messages on
+tickets they are viewing.
+
+Set C<$ShowUnreadMessageNotifications> to a false value to disable this feature.
+
+=cut
+
+Set($ShowUnreadMessageNotifications, 1);
+
+
+=item C<$HomepageComponents>
+
+C<$HomepageComponents> is an arrayref of allowed components on a user's
+customized homepage ("RT at a glance").
+
+=cut
+
+Set($HomepageComponents, [qw(QuickCreate Quicksearch MyCalendar MyAdminQueues MySupportQueues MyReminders RefreshHomepage Dashboards)]);
+
+=item C<@MasonParameters>
+
+C<@MasonParameters> is the list of parameters for the constructor of
+HTML::Mason's Apache or CGI Handler. This is normally only useful
+for debugging, eg. profiling individual components with:
+
+ use MasonX::Profiler; # available on CPAN
+ Set(@MasonParameters, (preamble => 'my $p = MasonX::Profiler->new($m, $r);'));
+
+=cut
+
+Set(@MasonParameters, ());
+
+=item C<$DefaultSearchResultFormat>
+
+C<$DefaultSearchResultFormat> is the default format for RT search results
+
+=cut
+
+Set ($DefaultSearchResultFormat, qq{
+ '<B><A HREF="__WebPath__/Ticket/Display.html?id=__id__">__id__</a></B>/TITLE:#',
+ '<B><A HREF="__WebPath__/Ticket/Display.html?id=__id__">__Subject__</a></B>/TITLE:Subject',
+ Customer,
+ Status,
+ QueueName,
+ OwnerName,
+ Priority,
+ '__NEWLINE__',
+ '',
+ '<small>__Requestors__</small>',
+ '<small>__CustomerTags__</small>',
+ '<small>__CreatedRelative__</small>',
+ '<small>__ToldRelative__</small>',
+ '<small>__LastUpdatedRelative__</small>',
+ '<small>__TimeLeft__</small>'});
+
+=item C<$DefaultSelfServiceSearchResultFormat>
+
+C<$DefaultSelfServiceSearchResultFormat> is the default format of searches displayed in the
+SelfService interface.
+
+=cut
+
+Set($DefaultSelfServiceSearchResultFormat, qq{
+ '<B><A HREF="__WebPath__/SelfService/Display.html?id=__id__">__id__</a></B>/TITLE:#',
+ '<B><A HREF="__WebPath__/SelfService/Display.html?id=__id__">__Subject__</a></B>/TITLE:Subject',
+ Status,
+ Requestors,
+ OwnerName});
+
+=item C<%AdminSearchResultFormat>
+
+In admin interface format strings similar to tickets search result
+formats are used. Use C<%AdminSearchResultFormat> to define format
+strings per RT class.
+
+=cut
+
+Set(%AdminSearchResultFormat,
+ Queues =>
+ q{'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/Admin/Queues/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
+ .q{,__Description__,__Address__,__Priority__,__DefaultDueIn__,__Disabled__},
+
+ Groups =>
+ q{'<a href="__WebPath__/Admin/Groups/Modify.html?id=__id__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/Admin/Groups/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
+ .q{,'__Description__'},
+
+ Users =>
+ q{'<a href="__WebPath__/Admin/Users/Modify.html?id=__id__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/Admin/Users/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
+ .q{,__RealName__, __EmailAddress__},
+
+ CustomFields =>
+ q{'<a href="__WebPath__/Admin/CustomFields/Modify.html?id=__id__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/Admin/CustomFields/Modify.html?id=__id__">__Name__</a>/TITLE:Name'}
+ .q{,__AppliedTo__, __FriendlyType__, __FriendlyPattern__},
+
+ Scrips =>
+ q{'<a href="__WebPath__/__WebRequestPathDir__/Scrip.html?id=__id__&Queue=__QueueId__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/__WebRequestPathDir__/Scrip.html?id=__id__&Queue=__QueueId__">__Description__</a>/TITLE:Description'}
+ .q{,__Stage__, __Condition__, __Action__, __Template__},
+
+ Templates =>
+ q{'<a href="__WebPath__/__WebRequestPathDir__/Template.html?Queue=__QueueId__&Template=__id__">__id__</a>/TITLE:#'}
+ .q{,'<a href="__WebPath__/__WebRequestPathDir__/Template.html?Queue=__QueueId__&Template=__id__">__Name__</a>/TITLE:Name'}
+ .q{,'__Description__'},
+);
+
+=item C<$SuppressInlineTextFiles>
+
+If C<$SuppressInlineTextFiles> is set to a true value, then uploaded
+text files (text-type attachments with file names) are prevented
+from being displayed in-line when viewing a ticket's history.
+
+=cut
+
+Set($SuppressInlineTextFiles, undef);
+
+=item C<$DontSearchFileAttachments>
+
+If C<$DontSearchFileAttachments> is set to a true value, then uploaded
+files (attachments with file names) are not searched during full-content
+ticket searches.
+
+=cut
+
+Set($DontSearchFileAttachments, undef);
+
+=item C<%ChartFont>
+
+The L<GD> module (which RT uses for graphs) ships with a builtin font
+that doesn't have full Unicode support. You can use a given TrueType font
+for a specific language by setting %ChartFont to (language =E<gt> the
+absolute path of a font) pairs. Your GD library must have support for
+TrueType fonts to use this option. If there is no entry for a language
+in the hash then font with 'others' key is used.
+
+RT comes with two TrueType fonts covering most available languages.
+
+=cut
+
+Set(
+ %ChartFont,
+ 'zh-cn' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
+ 'zh-tw' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
+ 'ja' => "$RT::BasePath/share/fonts/DroidSansFallback.ttf",
+ 'others' => "$RT::BasePath/share/fonts/DroidSans.ttf",
+);
+
+=item C<$ChartsTimezonesInDB>
+
+RT stores dates using the UTC timezone in the DB, so charts grouped
+by dates and time are not representative. Set C<$ChartsTimezonesInDB>
+to a true value to enable timezone conversions using your DB's
+capabilities. You may need to do some work on the DB side to use this
+feature, read more in F<docs/timezones_in_charts.pod>.
+
+At this time, this feature only applies to MySQL and PostgreSQL.
+
+=cut
+
+Set( $ChartsTimezonesInDB, 0 );
+
+=item C<@Active_MakeClicky>
+
+MakeClicky detects various formats of data in headers and email
+messages, and extends them with supporting links. By default, RT
+provides two formats:
+
+* 'httpurl': detects http:// and https:// URLs and adds '[Open URL]'
+ link after the URL.
+
+* 'httpurl_overwrite': also detects URLs as 'httpurl' format, but
+ replace URL with link and *adds spaces* into text if it's longer
+ then 30 chars. This allow browser to wrap long URLs and avoid
+ horizontal scrolling.
+
+See F<share/html/Elements/MakeClicky> for documentation on how to add your own.
+
+=cut
+
+Set(@Active_MakeClicky, qw());
+
+=item C<$DefaultQueue>
+
+Use this to select the default queue name that will be used for creating new
+tickets. You may use either the queue's name or its ID. This only affects the
+queue selection boxes on the web interface.
+
+=cut
+
+#Set($DefaultQueue, 'General');
+
+=item C<$DefaultTimeUnitsToHours>
+
+Use this to set the default units for time entry to hours instead of minutes.
+
+=cut
+
+Set($DefaultTimeUnitsToHours, 0);
+
+=item C<$SimpleSearchIncludeResolved>
+
+By default, the simple ticket search in the top bar excludes "resolved" tickets
+unless a status argument is specified. Set this to a true value to include
+them.
+
+=cut
+
+Set($SimpleSearchIncludeResolved, 0);
+
+=back
+
+=head1 L<Net::Server> (rt-server) Configuration
+
+=over 4
+
+=item C<$StandaloneMinServers>, C<$StandaloneMaxServers>
+
+The absolute minimum and maximum number of servers that will be created to
+handle requests. Having multiple servers means that serving a slow page will
+affect other users less.
+
+=cut
+
+Set($StandaloneMinServers, 1);
+Set($StandaloneMaxServers, 1);
+
+=item C<$StandaloneMinSpareServers>, C<$StandaloneMaxSpareServers>
+
+These next two options can be used to scale up and down the number of servers
+to adjust to load. These two options will respect the C<$StandaloneMinServers
+> and C<$StandaloneMaxServers options>.
+
+=cut
+
+Set($StandaloneMinSpareServers, 0);
+Set($StandaloneMaxSpareServers, 0);
+
+=item C<$StandaloneMaxRequests>
+
+This sets the absolute maximum number of requests a single server will serve.
+Setting this would be useful if, for example, memory usage slowly crawls up
+every hit.
+
+=cut
+
+#Set($StandaloneMaxRequests, 50);
+
+=item C<%NetServerOptions>
+
+C<%NetServerOptions> is a hash of additional options to use for
+L<Net::Server/DEFAULT ARGUMENTS>. For example, you could set
+reverse_lookups to get the hostnames for all users with:
+
+C<Set(%NetServerOptions, (reverse_lookups => 1));>
+
+=cut
+
+Set(%NetServerOptions, ());
+
+=back
+
+
+=head1 UTF-8 Configuration
+
+=over 4
+
+=item C<@LexiconLanguages>
+
+An array that contains languages supported by RT's internationalization
+interface. Defaults to all *.po lexicons; setting it to C<qw(en ja)> will make
+RT bilingual instead of multilingual, but will save some memory.
+
+=cut
+
+Set(@LexiconLanguages, qw(*));
+
+=item C<@EmailInputEncodings>
+
+An array that contains default encodings used to guess which charset
+an attachment uses if not specified. Must be recognized by
+L<Encode::Guess>.
+
+=cut
+
+Set(@EmailInputEncodings, qw(utf-8 iso-8859-1 us-ascii));
+
+=item C<$EmailOutputEncoding>
+
+The charset for localized email. Must be recognized by Encode.
+
+=cut
+
+Set($EmailOutputEncoding, 'utf-8');
+
+
+=back
+
+=head1 Date Handling Configuration
+
+=over 4
+
+=item C<$DateTimeFormat>
+
+You can choose date and time format. See "Output formatters"
+section in perldoc F<lib/RT/Date.pm> for more options. This option can
+be overridden by users in their preferences.
+Some examples:
+
+C<Set($DateTimeFormat, 'LocalizedDateTime');>
+C<Set($DateTimeFormat, { Format => 'ISO', Seconds => 0 });>
+C<Set($DateTimeFormat, 'RFC2822');>
+C<Set($DateTimeFormat, { Format => 'RFC2822', Seconds => 0, DayOfWeek => 0 });>
+
+=cut
+
+Set($DateTimeFormat, 'DefaultFormat');
+
+# Next two options are for Time::ParseDate
+
+=item C<$DateDayBeforeMonth>
+
+Set this to 1 if your local date convention looks like "dd/mm/yy" instead of
+"mm/dd/yy". Used only for parsing, not for displaying dates.
+
+=cut
+
+Set($DateDayBeforeMonth , 1);
+
+=item C<$AmbiguousDayInPast>, C<$AmbiguousDayInFuture>
+
+Should an unspecified day or year in a date refer to a future or a
+past value? For example, should a date of "Tuesday" default to mean
+the date for next Tuesday or last Tuesday? Should the date "March 1"
+default to the date for next March or last March?
+
+Set $<AmbiguousDayInPast> for the last date, or $<$AmbiguousDayInFuture> for the
+next date.
+
+The default is usually good.
+
+=cut
+
+Set($AmbiguousDayInPast, 0);
+Set($AmbiguousDayInFuture, 0);
+
+=back
+
+=head1 Approval Configuration
+
+Configuration for the approval system
+
+=over 4
+
+=item C<$ApprovalRejectionNotes>
+
+Should rejection notes be sent to the requestors? The default is true.
+
+=cut
+
+Set($ApprovalRejectionNotes, 1);
+
+
+=back
+
+=head1 Miscellaneous Configuration
+
+=over 4
+
+=item C<@ActiveStatus>, C<@InactiveStatus>
+
+You can define new statuses and even reorder existing statuses here.
+WARNING. DO NOT DELETE ANY OF THE DEFAULT STATUSES. If you do, RT
+will break horribly. The statuses you add must be no longer than
+10 characters.
+
+=cut
+
+Set(@ActiveStatus, qw(new open stalled));
+Set(@InactiveStatus, qw(resolved rejected deleted));
+
+=item C<$LinkTransactionsRun1Scrip>
+
+RT-3.4 backward compatibility setting. Add/Delete Link used to record one
+transaction and run one scrip. Set this value to 1 if you want
+only one of the link transactions to have scrips run.
+
+=cut
+
+Set($LinkTransactionsRun1Scrip, 0);
+
+=item C<$StrictLinkACL>
+
+When this feature is enabled a user needs I<ModifyTicket> rights on both
+tickets to link them together, otherwise he can have rights on either of
+them.
+
+=cut
+
+Set($StrictLinkACL, 1);
+
+=item C<$PreviewScripMessages>
+
+Set C<$PreviewScripMessages> to 1 if the scrips preview on the ticket
+reply page should include the content of the messages to be sent.
+
+=cut
+
+Set($PreviewScripMessages, 0);
+
+=item C<$UseTransactionBatch>
+
+Set C<$UseTransactionBatch> to 1 to execute transactions in batches,
+such that a resolve and comment (for example) would happen
+simultaneously, instead of as two transactions, unaware of each
+others' existence.
+
+=cut
+
+Set($UseTransactionBatch, 1);
+
+=item C<@CustomFieldValuesSources>
+
+Set C<@CustomFieldValuesSources> to a list of class names which extend
+L<RT::CustomFieldValues::External>. This can be used to pull lists of
+custom field values from external sources at runtime.
+
+=cut
+
+Set(@CustomFieldValuesSources, ('RT::CustomFieldValues::Queues'));
+
+=item C<$CanonicalizeRedirectURLs>
+
+Set C<$CanonicalizeRedirectURLs> to 1 to use $C<WebURL> when redirecting rather
+than the one we get from C<%ENV>.
+
+If you use RT behind a reverse proxy, you almost certainly want to
+enable this option.
+
+=cut
+
+Set($CanonicalizeRedirectURLs, 0);
+=item C<$EnableReminders>
+
+Hide links/portlets related to Reminders by setting this to 0
+
+=cut
+
+Set($EnableReminders,1);
+
+
+=item C<@Plugins>
+
+Set C<@Plugins> to a list of external RT plugins that should be enabled (those
+plugins have to be previously downloaded and installed).
+Example:
+
+C<Set(@Plugins, (qw(Extension::QuickDelete RT::FM)));>
+
+=cut
+
+Set(@Plugins, (qw(RTx::Calendar
+ RT::Extension::MobileUI))); #RTx::Checklist ));
+
+=back
+
+=head1 Development Configuration
+
+=over 4
+
+=item C<$DevelMode>
+
+RT comes with a "Development mode" setting.
+This setting, as a convenience for developers, turns on
+all sorts of development options that you most likely don't want in
+production:
+
+* Turns off Mason's 'static_source' directive. By default, you can't
+ edit RT's web ui components on the fly and have RT magically pick up
+ your changes. (It's a big performance hit)
+
+ * More to come
+
+=cut
+
+Set($DevelMode, '@RT_DEVEL_MODE@');
+
+
+=back
+
+=head1 Deprecated Options
+
+=over 4
+
+=item C<$AlwaysUseBase64>
+
+Encode blobs as base64 in DB (?)
+
+=item C<$TicketBaseURI>
+
+Base URI to tickets in this system; used when loading (?)
+
+=item C<$UseCodeTickets>
+
+This option is exists for backwards compatibility. Don't use it.
+
+=back
+
+=cut
1;
projects / freeside.git / blobdiff