-# BEGIN LICENSE BLOCK
-#
-# Copyright (c) 1996-2003 Jesse Vincent <jesse@bestpractical.com>
-#
-# (Except where explictly superceded by other copyright notices)
-#
+# BEGIN BPS TAGGED BLOCK {{{
+#
+# COPYRIGHT:
+#
+# This software is Copyright (c) 1996-2016 Best Practical Solutions, LLC
+# <sales@bestpractical.com>
+#
+# (Except where explicitly superseded by other copyright notices)
+#
+#
+# LICENSE:
+#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
# from www.gnu.org.
-#
+#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
-#
-# Unless otherwise specified, all modifications, corrections or
-# extensions to this work which alter its source code become the
-# property of Best Practical Solutions, LLC when submitted for
-# inclusion in the work.
-#
-#
-# END LICENSE BLOCK
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 or visit their web page on the internet at
+# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
+#
+#
+# CONTRIBUTION SUBMISSION POLICY:
+#
+# (The following paragraph is not intended to limit the rights granted
+# to you to modify and distribute this software under the terms of
+# the GNU General Public License and is only of importance to you if
+# you choose to contribute your changes and enhancements to the
+# community by submitting them to Best Practical Solutions, LLC.)
+#
+# By intentionally submitting any modifications, corrections or
+# derivatives to this work, or any other work intended for use with
+# Request Tracker, to Best Practical Solutions, LLC, you confirm that
+# you are the copyright holder for those contributions and you grant
+# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
+# royalty-free, perpetual, license to use, copy, create derivative
+# works based on those contributions, and sublicense and distribute
+# those contributions and any derivatives thereof.
+#
+# END BPS TAGGED BLOCK }}}
#
# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
# Have a look at "configure" and "Makefile.in" instead
#
-PERL = @PERL@
+PERL = @PERL@
+INSTALL = @INSTALL@
+CC = @CC@
+
+RT_LAYOUT = @rt_layout_name@
-CONFIG_FILE_PATH = @CONFIG_FILE_PATH@
-CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
-SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
+CONFIG_FILE_PATH = @CONFIG_FILE_PATH_R@
+CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
+SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
RT_VERSION_MAJOR = @RT_VERSION_MAJOR@
RT_VERSION_MINOR = @RT_VERSION_MINOR@
RT_VERSION_PATCH = @RT_VERSION_PATCH@
-RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
-TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
+RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
+TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
# This is the group that all of the installed files will be chgrp'ed to.
WEB_USER = @WEB_USER@
WEB_GROUP = @WEB_GROUP@
-# {{{ Files and directories
-
# DESTDIR allows you to specify that RT be installed somewhere other than
-# where it will eventually reside
+# where it will eventually reside. DESTDIR _must_ have a trailing slash
+# if it's defined.
DESTDIR =
-RT_PATH = @RT_PATH@
-RT_ETC_PATH = @RT_ETC_PATH@
-RT_BIN_PATH = @RT_BIN_PATH@
-RT_SBIN_PATH = @RT_SBIN_PATH@
-RT_LIB_PATH = @RT_LIB_PATH@
-RT_MAN_PATH = @RT_MAN_PATH@
-RT_VAR_PATH = @RT_VAR_PATH@
-RT_DOC_PATH = @RT_DOC_PATH@
-RT_LOCAL_PATH = @RT_LOCAL_PATH@
-LOCAL_ETC_PATH = @LOCAL_ETC_PATH@
-LOCAL_LIB_PATH = @LOCAL_LIB_PATH@
-LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH@
-MASON_HTML_PATH = @MASON_HTML_PATH@
-MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH@
-MASON_DATA_PATH = @MASON_DATA_PATH@
-MASON_SESSION_PATH = @MASON_SESSION_PATH@
-RT_LOG_PATH = @RT_LOG_PATH@
+
+RT_PATH = @RT_PATH_R@
+RT_ETC_PATH = @RT_ETC_PATH_R@
+RT_BIN_PATH = @RT_BIN_PATH_R@
+RT_SBIN_PATH = @RT_SBIN_PATH_R@
+RT_LIB_PATH = @RT_LIB_PATH_R@
+RT_MAN_PATH = @RT_MAN_PATH_R@
+RT_VAR_PATH = @RT_VAR_PATH_R@
+RT_DOC_PATH = @RT_DOC_PATH_R@
+RT_FONT_PATH = @RT_FONT_PATH_R@
+RT_LEXICON_PATH = @RT_LEXICON_PATH_R@
+RT_STATIC_PATH = @RT_STATIC_PATH_R@
+RT_LOCAL_PATH = @RT_LOCAL_PATH_R@
+LOCAL_PLUGIN_PATH = @RT_LOCAL_PATH_R@/plugins
+LOCAL_ETC_PATH = @LOCAL_ETC_PATH_R@
+LOCAL_LIB_PATH = @LOCAL_LIB_PATH_R@
+LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH_R@
+LOCAL_STATIC_PATH = @LOCAL_STATIC_PATH_R@
+MASON_HTML_PATH = @MASON_HTML_PATH_R@
+MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH_R@
+MASON_DATA_PATH = @MASON_DATA_PATH_R@
+MASON_SESSION_PATH = @MASON_SESSION_PATH_R@
+RT_LOG_PATH = @RT_LOG_PATH_R@
# RT_READABLE_DIR_MODE is the mode of directories that are generally meant
# to be accessable
-# {{{ all these define the places that RT's binaries should get installed
-# RT_MODPERL_HANDLER is the mason handler script for mod_perl
-RT_MODPERL_HANDLER = $(RT_BIN_PATH)/webmux.pl
-# RT_FASTCGI_HANDLER is the mason handler script for FastCGI
-RT_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.fcgi
-# RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI
-RT_WIN32_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.svc
# RT's CLI
-RT_CLI_BIN = $(RT_BIN_PATH)/rt
+RT_CLI_BIN = rt
# RT's mail gateway
-RT_MAILGATE_BIN = $(RT_BIN_PATH)/rt-mailgate
+RT_MAILGATE_BIN = rt-mailgate
# RT's cron tool
-RT_CRON_BIN = $(RT_BIN_PATH)/rt-crontool
+RT_CRON_BIN = rt-crontool
-# }}}
-SETGID_BINARIES = $(DESTDIR)/$(RT_FASTCGI_HANDLER) \
- $(DESTDIR)/$(RT_WIN32_FASTCGI_HANDLER)
-BINARIES = $(DESTDIR)/$(RT_MODPERL_HANDLER) \
- $(DESTDIR)/$(RT_MAILGATE_BIN) \
- $(DESTDIR)/$(RT_CLI_BIN) \
- $(DESTDIR)/$(RT_CRON_BIN) \
- $(SETGID_BINARIES)
-SYSTEM_BINARIES = $(DESTDIR)/$(RT_SBIN_PATH)/
+BINARIES = $(RT_MAILGATE_BIN) \
+ $(RT_CLI_BIN) \
+ $(RT_CRON_BIN)
+
+SYSTEM_BINARIES = rt-attributes-viewer \
+ rt-clean-sessions \
+ rt-dump-metadata \
+ rt-email-dashboards \
+ rt-email-digest \
+ rt-email-group-admin \
+ rt-fulltext-indexer \
+ rt-importer \
+ rt-preferences-viewer \
+ rt-serializer \
+ rt-server \
+ rt-session-viewer \
+ rt-server.fcgi \
+ rt-session-viewer \
+ rt-setup-database \
+ rt-setup-fulltext-index \
+ rt-shredder \
+ rt-test-dependencies \
+ rt-validator \
+ rt-validate-aliases \
+ standalone_httpd
+
+
+ETC_FILES = acl.Pg \
+ acl.Oracle \
+ acl.mysql \
+ schema.Pg \
+ schema.Oracle \
+ schema.mysql \
+ schema.SQLite \
+ initialdata
+
+
+
+WEB_HANDLER = @WEB_HANDLER@
-# }}}
-# {{{ Database setup
#
# DB_TYPE defines what sort of database RT trys to talk to
-# "mysql" is known to work.
-# "Pg" is known to work
-# "Informix" is known to work
+# "mysql", "Oracle", "Pg", and "SQLite" are known to work.
DB_TYPE = @DB_TYPE@
# For mysql, you probably want 'root'
# For Pg, you probably want 'postgres'
# For Oracle, you want 'system'
-# For Informix, you want 'informix'
DB_DBA = @DB_DBA@
DB_RT_USER = @DB_RT_USER@
DB_RT_PASS = @DB_RT_PASS@
-# }}}
+
+
+TEST_FILES = t/*.t t/*/*.t t/*/*/*.t
+TEST_VERBOSE = 0
+
+RT_TEST_PARALLEL_NUM ?= 5
####################################################################
all: default
default:
- @echo "Please read RT's readme before installing. Not doing so could"
- @echo "be dangerous."
+ @echo "Please read RT's README before beginning your installation."
instruct:
- @echo "Congratulations. RT has been installed. "
+ @echo "Congratulations. RT is now installed."
@echo ""
@echo ""
@echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
@echo ""
- @echo "(You will definitely need to set RT's database password before continuing."
- @echo " Not doing so could be very dangerous)"
+ @echo "(You will definitely need to set RT's database password in "
+ @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
+ @echo "very dangerous. Note that you do not have to manually add a "
+ @echo "database user or set up a database for RT. These actions will be "
+ @echo "taken care of in the next step.)"
@echo ""
@echo "After that, you need to initialize RT's database by running"
@echo " 'make initialize-database'"
-# @echo " or by executing "
-# @echo " '$(RT_SBIN_PATH)/rt-setup-database --action init \ "
-# @echo " --dba $(DB_DBA) --prompt-for-dba-password'"
-
-
upgrade-instruct:
- @echo "Congratulations. RT has been upgraded. You should now check-over"
+ @echo "Congratulations. RT has been upgraded. You should now check over"
@echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
@echo "you should update RT's system database objects by running "
- @echo " ls etc/upgrade"
- @echo "For each file in that directory whose name is greater than"
- @echo "your previously installed RT version, run:"
- @echo " $(RT_SBIN_PATH)/rt-setup-database --action insert --datafile etc/upgrade/<version>"
-
+ @echo " make upgrade-database"
-upgrade: config-install dirs files-install fixperms upgrade-instruct
-upgrade-noclobber: config-install libs-install html-install bin-install local-install doc-install fixperms
+upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
-
-# {{{ dependencies
+my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
testdeps:
- $(PERL) ./sbin/rt-test-dependencies --with-$(DB_TYPE)
+ $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
+
+depends: fixdeps
fixdeps:
- $(PERL) ./sbin/rt-test-dependencies --install --with-$(DB_TYPE)
+ $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
#}}}
-# {{{ fixperms
fixperms:
# Make the libraries readable
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)/$(RT_LIB_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(RT_LIB_PATH)
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(RT_LIB_PATH)
+ chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
+ chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
+ chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
+ chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH)
- chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH)
+ chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
- chmod 0755 $(DESTDIR)/$(RT_ETC_PATH)
- chmod 0500 $(DESTDIR)/$(RT_ETC_PATH)/*
+ chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
+ cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
#TODO: the config file should probably be able to have its
- # owner set seperately from the binaries.
- chown -R $(BIN_OWNER) $(DESTDIR)/$(RT_ETC_PATH)
- chgrp -R $(RTGROUP) $(DESTDIR)/$(RT_ETC_PATH)
+ # owner set separately from the binaries.
+ chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
+ chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
+
+ chmod 0440 $(DESTDIR)$(CONFIG_FILE)
+ chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
+ # Make this externally readable
+ chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata
+
+ # Make the system binaries
+ cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
- chmod 0550 $(DESTDIR)/$(CONFIG_FILE)
- chmod 0550 $(DESTDIR)/$(SITE_CONFIG_FILE)
+ # Make the system binaries executable also
+ cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
- # Make the interfaces executable and setgid rt
- chown $(BIN_OWNER) $(BINARIES)
- chgrp $(RTGROUP) $(BINARIES)
- chmod 0755 $(BINARIES)
- chmod g+s $(SETGID_BINARIES)
+ # Make upgrade scripts executable if they are in the source.
+ #
+ ( cd etc/upgrade && find . -type f -not -name '*.in' -perm @FINDPERM@0111 -print ) | while read file ; do \
+ chmod a+x "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \
+ done
# Make the web ui readable by all.
- chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) \
- $(DESTDIR)/$(LOCAL_LEXICON_PATH)
- chown -R $(LIBS_OWNER) $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
- chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(MASON_HTML_PATH) \
- $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
+ chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
+ $(DESTDIR)$(RT_LEXICON_PATH) \
+ $(DESTDIR)$(LOCAL_LEXICON_PATH) \
+ $(DESTDIR)$(RT_STATIC_PATH) \
+ $(DESTDIR)$(LOCAL_STATIC_PATH)
+ chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
+ $(DESTDIR)$(RT_LEXICON_PATH) \
+ $(DESTDIR)$(LOCAL_LEXICON_PATH) \
+ $(DESTDIR)$(RT_STATIC_PATH) \
+ $(DESTDIR)$(LOCAL_STATIC_PATH)
+ chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
+ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
+ $(DESTDIR)$(RT_LEXICON_PATH) \
+ $(DESTDIR)$(LOCAL_LEXICON_PATH) \
+ $(DESTDIR)$(RT_STATIC_PATH) \
+ $(DESTDIR)$(LOCAL_STATIC_PATH)
# Make the web ui's data dir writable
- chmod 0770 $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
- chown -R $(WEB_USER) $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
- chgrp -R $(WEB_GROUP) $(DESTDIR)/$(MASON_DATA_PATH) \
- $(DESTDIR)/$(MASON_SESSION_PATH)
-# }}}
-
-fixperms-nosetgid: fixperms
- @echo "You should never be running RT this way. it's unsafe"
- chmod 0555 $(SETGID_BINARIES)
- chmod 0555 $(DESTDIR)/$(CONFIG_FILE)
- chmod 0555 $(DESTDIR)/$(SITE_CONFIG_FILE)
-
-# {{{ dirs
+ chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+ chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+ chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
+ $(DESTDIR)$(MASON_SESSION_PATH)
+
dirs:
- mkdir -p $(DESTDIR)/$(RT_LOG_PATH)
- mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)
- mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/cache
- mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/etc
- mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/obj
- mkdir -p $(DESTDIR)/$(MASON_SESSION_PATH)
- mkdir -p $(DESTDIR)/$(MASON_HTML_PATH)
- mkdir -p $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
- mkdir -p $(DESTDIR)/$(LOCAL_ETC_PATH)
- mkdir -p $(DESTDIR)/$(LOCAL_LIB_PATH)
- mkdir -p $(DESTDIR)/$(LOCAL_LEXICON_PATH)
-# }}}
-
-install: config-install dirs files-install fixperms instruct
-
-files-install: libs-install etc-install bin-install sbin-install html-install local-install doc-install
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_STATIC_PATH)
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
+ $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
+ $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_STATIC_PATH)
+
+clean-mason-cache:
+ rm -rf $(DESTDIR)$(MASON_DATA_PATH)/cache/*
+ rm -rf $(DESTDIR)$(MASON_DATA_PATH)/etc/*
+ rm -rf $(DESTDIR)$(MASON_DATA_PATH)/obj/*
+
+install: testdeps config-install dirs files-install fixperms instruct
+
+files-install: libs-install etc-install config-install bin-install sbin-install html-install doc-install font-install po-install static-install
config-install:
- mkdir -p $(DESTDIR)/$(CONFIG_FILE_PATH)
- cp etc/RT_Config.pm $(DESTDIR)/$(CONFIG_FILE)
- [ -f $(DESTDIR)/$(SITE_CONFIG_FILE) ] || cp etc/RT_SiteConfig.pm $(DESTDIR)/$(SITE_CONFIG_FILE)
-
- chgrp $(RTGROUP) $(DESTDIR)/$(CONFIG_FILE)
- chown $(BIN_OWNER) $(DESTDIR)/$(CONFIG_FILE)
-
- chgrp $(RTGROUP) $(DESTDIR)/$(SITE_CONFIG_FILE)
- chown $(BIN_OWNER) $(DESTDIR)/$(SITE_CONFIG_FILE)
-
- @echo "Installed configuration. about to install rt in $(RT_PATH)"
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
+@COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
+@COMMENT_INPLACE_LAYOUT@ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
+@COMMENT_INPLACE_LAYOUT@ @echo "Installed configuration. About to install RT in $(RT_PATH)"
test:
- $(PERL) -Ilib lib/t/00smoke.t
-
-regression-install: config-install
- $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)/$(CONFIG_FILE)
-
-regression-nosetgid-quiet: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms-nosetgid apachectl
- $(PERL) sbin/regression_harness
-
-regression-nosetgid: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms-nosetgid apachectl
- $(PERL) lib/t/02regression.t
-
-regression: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms apachectl
- $(PERL) lib/t/02regression.t
+ $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
-regression-quiet:
- $(PERL) sbin/regression_harness
+parallel-test: test-parallel
-regression-instruct:
- @echo "About to wipe your database for a regression test. ABORT NOW with Control-C"
+test-parallel:
+ RT_TEST_PARALLEL=1 $(PERL) "-MApp::Prove" -e 'my $$p = App::Prove->new(); $$p->process_args("-wlrj$(RT_TEST_PARALLEL_NUM)","--state=slow,save", "t"); exit( $$p->run() ? 0 : 1 )'
+regression-reset-db: force-dropdb
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba-password ''
-# {{{ database-installation
-
-regression-reset-db:
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --dba-password ''
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --dba-password ''
+initdb :: initialize-database
initialize-database:
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --prompt-for-dba-password
+
+upgrade-database:
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action upgrade --prompt-for-dba-password
dropdb:
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --prompt-for-dba-password
-insert-approval-data:
- $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/insert_approval_scrips
-# }}}
+force-dropdb:
+ $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba-password '' --force
+
+critic:
+ perlcritic --quiet sbin bin lib
-# {{{ libs-install
libs-install:
- [ -d $(DESTDIR)/$(RT_LIB_PATH) ] || mkdir $(DESTDIR)/$(RT_LIB_PATH)
- -cp -rp lib/* $(DESTDIR)/$(RT_LIB_PATH)
-# }}}
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type d -print ) | while read dir ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
-# {{{ html-install
html-install:
- [ -d $(DESTDIR)/$(MASON_HTML_PATH) ] || mkdir $(DESTDIR)/$(MASON_HTML_PATH)
- -cp -rp ./html/* $(DESTDIR)/$(MASON_HTML_PATH)
-# }}}
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type d -print ) | while read dir ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ $(MAKE) clean-mason-cache
+
+font-install:
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd share/fonts && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+
+
+po-install:
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LEXICON_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd share/po && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/po/$$file" "$(DESTDIR)$(RT_LEXICON_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+
+static-install:
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_STATIC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_STATIC_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd share/static && find . -type d -print ) | while read dir ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_STATIC_PATH)/$$dir" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -( cd share/static && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/static/$$file" "$(DESTDIR)$(RT_STATIC_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+
-# {{{ doc-install
doc-install:
- # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
- -[ -f $(DESTDIR)/$(RT_DOC_PATH) ] && rm $(DESTDIR)/$(RT_DOC_PATH)
- [ -d $(DESTDIR)/$(RT_DOC_PATH) ] || mkdir $(DESTDIR)/$(RT_DOC_PATH)
- -cp -rp ./README $(DESTDIR)/$(RT_DOC_PATH)
-# }}}
+@COMMENT_INPLACE_LAYOUT@ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
+@COMMENT_INPLACE_LAYOUT@ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
+@COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type d -print ) | while read dir ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_DOC_PATH)/$$dir" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type f -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "docs/$$file" "$(DESTDIR)$(RT_DOC_PATH)/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
-# {{{ etc-install
etc-install:
- mkdir -p $(DESTDIR)/$(RT_ETC_PATH)
- -cp -rp \
- etc/acl.* \
- etc/initialdata \
- etc/schema.* \
- $(DESTDIR)/$(RT_ETC_PATH)
-# }}}
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
+@COMMENT_INPLACE_LAYOUT@ for file in $(ETC_FILES) ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH)/upgrade ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)/upgrade
+@COMMENT_INPLACE_LAYOUT@ -( cd etc/upgrade && find . -type d -print ) | while read dir ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$dir" ; \
+@COMMENT_INPLACE_LAYOUT@ done
+@COMMENT_INPLACE_LAYOUT@ -( cd etc/upgrade && find . -type f -not -name '*.in' -print ) | while read file ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/upgrade/$$file" "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \
+@COMMENT_INPLACE_LAYOUT@ done
-# {{{ sbin-install
sbin-install:
- mkdir -p $(DESTDIR)/$(RT_SBIN_PATH)
- chmod +x sbin/rt-setup-database \
- sbin/rt-test-dependencies
- -cp -rp \
- sbin/rt-setup-database \
- sbin/rt-test-dependencies \
- $(DESTDIR)/$(RT_SBIN_PATH)
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
+@COMMENT_INPLACE_LAYOUT@ for file in $(SYSTEM_BINARIES) ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
+@COMMENT_INPLACE_LAYOUT@ done
-# }}}
-# {{{ bin-install
bin-install:
- mkdir -p $(DESTDIR)/$(RT_BIN_PATH)
- chmod +x bin/rt-mailgate \
- bin/rt-crontool
- -cp -rp \
- bin/rt-mailgate \
- bin/mason_handler.fcgi \
- bin/mason_handler.scgi \
- bin/mason_handler.svc \
- bin/rt \
- bin/webmux.pl \
- bin/rt-crontool \
- $(DESTDIR)/$(RT_BIN_PATH)
-# }}}
-
-# {{{ local-install
-local-install:
- -cp -rp ./local/html/* $(DESTDIR)/$(MASON_LOCAL_HTML_PATH)
- -cp -rp ./local/po/* $(DESTDIR)/$(LOCAL_LEXICON_PATH)
- -cp -rp ./local/etc/* $(DESTDIR)/$(LOCAL_ETC_PATH)
-# }}}
-
-# {{{ Best Practical Build targets -- no user servicable parts inside
-
-
-POD2TEST_EXE = sbin/extract_pod_tests
-
-testify-pods:
- [ -d lib/t/autogen ] || mkdir lib/t/autogen
- find lib -name \*pm |grep -v .svn | grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE)
- find bin -type f |grep -v .svn | grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE)
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
+@COMMENT_INPLACE_LAYOUT@ for file in $(BINARIES) ; do \
+@COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
+@COMMENT_INPLACE_LAYOUT@ done
regenerate-catalogs:
- $(PERL) sbin/extract-message-catalog
+ $(PERL) devel/tools/extract-message-catalog
license-tag:
- $(PERL) sbin/license_tag
-
-factory: initialize-database
- cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT
-
-commit:
- aegis -build ; aegis -diff ; aegis -test; aegis -develop_end
-
-integrate:
- aegis -integrate_begin; aegis -build; aegis -diff; aegis -test ; aegis -integrate_pass
-
-predist: commit tag-and-tar
-
-tag-and-release-baseline:
- aegis -cp -ind Makefile -output /tmp/Makefile.tagandrelease; \
- $(MAKE) -f /tmp/Makefile.tagandrelease tag-and-release-never-by-hand
-
-
-# Running this target in a working directory is
-# WRONG WRONG WRONG.
-# it will tag the current baseline with the version of RT defined
-# in the currently-being-worked-on makefile. which is wrong.
-# you want tag-and-release-baseline
-
-tag-and-release-never-by-hand:
- aegis --delta-name $(TAG)
- rm -rf /tmp/$(TAG)
- mkdir /tmp/$(TAG)
- cd /tmp/$(TAG); \
- aegis -cp -ind -delta $(TAG) . ;\
- make reconfigure;\
- chmod 600 Makefile;\
- aegis --report --project rt.$(RT_VERSION_MAJOR) \
- --page_width 80 \
- --page_length 9999 \
- --change $(RT_VERSION_MINOR) --output Changelog Change_Log
+ $(PERL) devel/tools/license_tag
+
+start-httpd:
+ $(PERL) sbin/standalone_httpd &
+
+start-server:
+ $(PERL) sbin/rt-server &
+
+
+SNAPSHOT=$(shell git describe --tags)
+THIRD_PARTY=devel/third-party/
+snapshot: build-snapshot build-third-party clearsign-snapshot clearsign-third-party snapshot-shasums
+
+build-snapshot:
+ git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
+ ( cd $(SNAPSHOT) && \
+ echo "$(SNAPSHOT)" > .tag && \
+ autoconf && \
+ INSTALL=./install-sh PERL=/usr/bin/perl ./configure \
+ --with-db-type=SQLite \
+ --enable-layout=relative \
+ --with-web-handler=standalone && \
+ rm -rf autom4te.cache \
+ config.status config.log config.pld \
+ )
+ tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
+ rm -fr "$(SNAPSHOT)/"
+
+clearsign-snapshot:
+ gpg --armor --detach-sign "$(SNAPSHOT).tar.gz"
+
+build-third-party:
+ git archive --prefix "$(SNAPSHOT)/$(THIRD_PARTY)" HEAD:$(THIRD_PARTY) \
+ | gzip > "$(SNAPSHOT)-third-party-source.tar.gz"
+ rm -rf "$(SNAPSHOT)/$(THIRD_PARTY)"
+
+clearsign-third-party:
+ gpg --armor --detach-sign "$(SNAPSHOT)-third-party-source.tar.gz"
+
+snapshot-shasums:
+ sha1sum $(SNAPSHOT)*.tar.gz*
+
+vessel-import: build-snapshot
+ [ -d $(VESSEL) ] || (echo "VESSEL isn't a path to your shipwright vessel" && exit -1)
+ cp $(VESSEL)/scripts/RT/build.pl /tmp/build.pl
+ ./sbin/rt-test-dependencies --with-standalone --with-fastcgi --with-sqlite --list > /tmp/rt.yml
+ shipwright import file:$(SNAPSHOT).tar.gz \
+ --require-yml /tmp/rt.yml \
+ --build-script /tmp/build.pl \
+ --name RT \
+ --repository fs:$(VESSEL) \
+ --log-level=info \
+ --skip cpan-capitalization,cpan-mod_perl,cpan-Encode,cpan-PPI,cpan-Test-Exception-LessClever,cpan-Test-Manifest,cpan-Test-Object,cpan-Test-Pod,cpan-Test-Requires,cpan-Test-SubCalls,cpan-Test-cpan-Tester,cpan-Test-Warn --skip-all-recommends
+ mv $(VESSEL)/scripts/RT/build $(VESSEL)/scripts/RT/build.pl
+
+JSMIN_URL = http://download.bestpractical.com/mirror/jsmin-2013-03-29.c
+JSMIN_SHA = 67dc8d73a8878f88cdaeb1a86775872eae5c3077
+
+jsmin: jsmin-checkcc jsmin-fetch jsmin-verify jsmin-confirm jsmin-build jsmin-install
+ @echo ""
+ @echo "To configure RT to use jsmin, add the following line to $(DESTDIR)$(RT_ETC_PATH)/RT_SiteConfig.pm:"
+ @echo ""
+ @echo " Set(\$$JSMinPath, '$(DESTDIR)$(RT_BIN_PATH)/jsmin');"
+ @echo ""
- cd /tmp; tar czvf /home/ftp/pub/rt/devel/$(TAG).tar.gz $(TAG)/
- chmod 644 /home/ftp/pub/rt/devel/$(TAG).tar.gz
+jsmin-checkcc:
+ @[ -n "$(CC)" ] || (echo "You don't appear to have a C compiler, please set CC and re-run configure" && exit 1)
+jsmin-confirm:
+ @echo "jsmin is distributed under a slightly unusual license and can't be shipped"
+ @echo "with RT. Before configuring RT to use jsmin, please read jsmin's license"
+ @echo "below:"
+ @echo ""
+ @$(PERL) -pe 'print && exit if /^\*\// or /^#include/' jsmin.c
+ @echo ""
+ @echo "Press Enter to accept the license, or Ctrl-C to stop now."
+ @$(PERL) -e '<STDIN>'
-reconfigure:
- aclocal -I m4
- autoconf
- chmod 755 ./configure
- ./configure
+jsmin-fetch:
+ @echo ""
+ @echo "Downloading jsmin.c from $(JSMIN_URL)"
+ @echo ""
+ @$(PERL) -MLWP::Simple -e 'exit not is_success(getstore("$(JSMIN_URL)", "jsmin.c"))' \
+ || (echo "Failed to download $(JSMIN_URL)" && exit 1)
-rpm:
- (cd ..; tar czvf /usr/src/redhat/SOURCES/rt.tar.gz rt)
- rpm -ba etc/rt.spec
+jsmin-verify:
+ @$(PERL) -MDigest::SHA -e \
+ 'exit not Digest::SHA->new(1)->addfile("jsmin.c")->hexdigest eq "$(JSMIN_SHA)"' \
+ || (echo "Verification of jsmin.c failed! Possible man in the middle?" && exit 1)
+jsmin-build:
+ $(CC) -o jsmin jsmin.c
-apachectl:
- apachectl stop
- sleep 3
- apachectl start
-# }}}
+jsmin-install:
+ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "jsmin" "$(DESTDIR)$(RT_BIN_PATH)/"
projects / freeside.git / blobdiff