# BEGIN BPS TAGGED BLOCK {{{ # # COPYRIGHT: # # This software is Copyright (c) 1996-2016 Best Practical Solutions, LLC # # # (Except where explicitly superseded by other copyright notices) # # # LICENSE: # # This work is made available to you under the terms of Version 2 of # the GNU General Public License. A copy of that license should have # been provided with this software, but in any event can be snarfed # from www.gnu.org. # # This work is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301 or visit their web page on the internet at # http://www.gnu.org/licenses/old-licenses/gpl-2.0.html. # # # CONTRIBUTION SUBMISSION POLICY: # # (The following paragraph is not intended to limit the rights granted # to you to modify and distribute this software under the terms of # the GNU General Public License and is only of importance to you if # you choose to contribute your changes and enhancements to the # community by submitting them to Best Practical Solutions, LLC.) # # By intentionally submitting any modifications, corrections or # derivatives to this work, or any other work intended for use with # Request Tracker, to Best Practical Solutions, LLC, you confirm that # you are the copyright holder for those contributions and you grant # Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable, # royalty-free, perpetual, license to use, copy, create derivative # works based on those contributions, and sublicense and distribute # those contributions and any derivatives thereof. # # END BPS TAGGED BLOCK }}} # # DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated. # Have a look at "configure" and "Makefile.in" instead # PERL = @PERL@ INSTALL = @INSTALL@ CC = @CC@ RT_LAYOUT = @rt_layout_name@ CONFIG_FILE_PATH = @CONFIG_FILE_PATH_R@ CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm RT_VERSION_MAJOR = @RT_VERSION_MAJOR@ RT_VERSION_MINOR = @RT_VERSION_MINOR@ RT_VERSION_PATCH = @RT_VERSION_PATCH@ RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH) TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH) # This is the group that all of the installed files will be chgrp'ed to. RTGROUP = @RTGROUP@ # User which should own rt binaries. BIN_OWNER = @BIN_OWNER@ # User that should own all of RT's libraries, generally root. LIBS_OWNER = @LIBS_OWNER@ # Group that should own all of RT's libraries, generally root. LIBS_GROUP = @LIBS_GROUP@ WEB_USER = @WEB_USER@ WEB_GROUP = @WEB_GROUP@ # DESTDIR allows you to specify that RT be installed somewhere other than # where it will eventually reside. DESTDIR _must_ have a trailing slash # if it's defined. DESTDIR = RT_PATH = @RT_PATH_R@ RT_ETC_PATH = @RT_ETC_PATH_R@ RT_BIN_PATH = @RT_BIN_PATH_R@ RT_SBIN_PATH = @RT_SBIN_PATH_R@ RT_LIB_PATH = @RT_LIB_PATH_R@ RT_MAN_PATH = @RT_MAN_PATH_R@ RT_VAR_PATH = @RT_VAR_PATH_R@ RT_DOC_PATH = @RT_DOC_PATH_R@ RT_FONT_PATH = @RT_FONT_PATH_R@ RT_LEXICON_PATH = @RT_LEXICON_PATH_R@ RT_STATIC_PATH = @RT_STATIC_PATH_R@ RT_LOCAL_PATH = @RT_LOCAL_PATH_R@ LOCAL_PLUGIN_PATH = @RT_LOCAL_PATH_R@/plugins LOCAL_ETC_PATH = @LOCAL_ETC_PATH_R@ LOCAL_LIB_PATH = @LOCAL_LIB_PATH_R@ LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH_R@ LOCAL_STATIC_PATH = @LOCAL_STATIC_PATH_R@ MASON_HTML_PATH = @MASON_HTML_PATH_R@ MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH_R@ MASON_DATA_PATH = @MASON_DATA_PATH_R@ MASON_SESSION_PATH = @MASON_SESSION_PATH_R@ RT_LOG_PATH = @RT_LOG_PATH_R@ # RT_READABLE_DIR_MODE is the mode of directories that are generally meant # to be accessable RT_READABLE_DIR_MODE = 0755 # RT's CLI RT_CLI_BIN = rt # RT's mail gateway RT_MAILGATE_BIN = rt-mailgate # RT's cron tool RT_CRON_BIN = rt-crontool BINARIES = $(RT_MAILGATE_BIN) \ $(RT_CLI_BIN) \ $(RT_CRON_BIN) SYSTEM_BINARIES = rt-attributes-viewer \ rt-clean-sessions \ rt-dump-metadata \ rt-email-dashboards \ rt-email-digest \ rt-email-group-admin \ rt-fulltext-indexer \ rt-importer \ rt-preferences-viewer \ rt-serializer \ rt-server \ rt-session-viewer \ rt-server.fcgi \ rt-session-viewer \ rt-setup-database \ rt-setup-fulltext-index \ rt-shredder \ rt-test-dependencies \ rt-validator \ rt-validate-aliases \ standalone_httpd ETC_FILES = acl.Pg \ acl.Oracle \ acl.mysql \ schema.Pg \ schema.Oracle \ schema.mysql \ schema.SQLite \ initialdata WEB_HANDLER = @WEB_HANDLER@ # # DB_TYPE defines what sort of database RT trys to talk to # "mysql", "Oracle", "Pg", and "SQLite" are known to work. DB_TYPE = @DB_TYPE@ # Set DBA to the name of a unix account with the proper permissions and # environment to run your commandline SQL sbin # Set DB_DBA to the name of a DB user with permission to create new databases # For mysql, you probably want 'root' # For Pg, you probably want 'postgres' # For Oracle, you want 'system' DB_DBA = @DB_DBA@ DB_HOST = @DB_HOST@ # If you're not running your database server on its default port, # specifiy the port the database server is running on below. # It's generally safe to leave this blank DB_PORT = @DB_PORT@ # # Set this to the canonical name of the interface RT will be talking to the # database on. If you said that the RT_DB_HOST above was "localhost," this # should be too. This value will be used to grant rt access to the database. # If you want to access the RT database from multiple hosts, you'll need # to grant those database rights by hand. # DB_RT_HOST = @DB_RT_HOST@ # set this to the name you want to give to the RT database in # your database server. For Oracle, this should be the name of your sid DB_DATABASE = @DB_DATABASE@ DB_RT_USER = @DB_RT_USER@ DB_RT_PASS = @DB_RT_PASS@ TEST_FILES = t/*.t t/*/*.t t/*/*/*.t TEST_VERBOSE = 0 RT_TEST_PARALLEL_NUM ?= 5 #################################################################### all: default default: @echo "Please read RT's README before beginning your installation." instruct: @echo "Congratulations. RT is now installed." @echo "" @echo "" @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)." @echo "" @echo "(You will definitely need to set RT's database password in " @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be " @echo "very dangerous. Note that you do not have to manually add a " @echo "database user or set up a database for RT. These actions will be " @echo "taken care of in the next step.)" @echo "" @echo "After that, you need to initialize RT's database by running" @echo " 'make initialize-database'" upgrade-instruct: @echo "Congratulations. RT has been upgraded. You should now check over" @echo "$(CONFIG_FILE) for any necessary site customization. Additionally," @echo "you should update RT's system database objects by running " @echo " make upgrade-database" upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"') testdeps: $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers) depends: fixdeps fixdeps: $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers) #}}} fixperms: # Make the libraries readable chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH) chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH) chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH) chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH) chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH) chmod 0755 $(DESTDIR)$(RT_ETC_PATH) cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true #TODO: the config file should probably be able to have its # owner set separately from the binaries. chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH) chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH) chmod 0440 $(DESTDIR)$(CONFIG_FILE) chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE) # Make this externally readable chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata # Make the system binaries cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES)) # Make the system binaries executable also cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES)) # Make upgrade scripts executable if they are in the source. # ( cd etc/upgrade && find . -type f -not -name '*.in' -perm @FINDPERM@0111 -print ) | while read file ; do \ chmod a+x "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \ done # Make the web ui readable by all. chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ $(DESTDIR)$(RT_LEXICON_PATH) \ $(DESTDIR)$(LOCAL_LEXICON_PATH) \ $(DESTDIR)$(RT_STATIC_PATH) \ $(DESTDIR)$(LOCAL_STATIC_PATH) chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ $(DESTDIR)$(RT_LEXICON_PATH) \ $(DESTDIR)$(LOCAL_LEXICON_PATH) \ $(DESTDIR)$(RT_STATIC_PATH) \ $(DESTDIR)$(LOCAL_STATIC_PATH) chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \ $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \ $(DESTDIR)$(RT_LEXICON_PATH) \ $(DESTDIR)$(LOCAL_LEXICON_PATH) \ $(DESTDIR)$(RT_STATIC_PATH) \ $(DESTDIR)$(LOCAL_STATIC_PATH) # Make the web ui's data dir writable chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \ $(DESTDIR)$(MASON_SESSION_PATH) chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \ $(DESTDIR)$(MASON_SESSION_PATH) chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \ $(DESTDIR)$(MASON_SESSION_PATH) dirs: $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_STATIC_PATH) $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH) $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH) $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_STATIC_PATH) clean-mason-cache: rm -rf $(DESTDIR)$(MASON_DATA_PATH)/cache/* rm -rf $(DESTDIR)$(MASON_DATA_PATH)/etc/* rm -rf $(DESTDIR)$(MASON_DATA_PATH)/obj/* install: testdeps config-install dirs files-install fixperms instruct files-install: libs-install etc-install config-install bin-install sbin-install html-install doc-install font-install po-install static-install config-install: @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH) @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE) @COMMENT_INPLACE_LAYOUT@ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE) @COMMENT_INPLACE_LAYOUT@ @echo "Installed configuration. About to install RT in $(RT_PATH)" test: $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES) parallel-test: test-parallel test-parallel: RT_TEST_PARALLEL=1 $(PERL) "-MApp::Prove" -e 'my $$p = App::Prove->new(); $$p->process_args("-wlrj$(RT_TEST_PARALLEL_NUM)","--state=slow,save", "t"); exit( $$p->run() ? 0 : 1 )' regression-reset-db: force-dropdb $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba-password '' initdb :: initialize-database initialize-database: $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --prompt-for-dba-password upgrade-database: $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action upgrade --prompt-for-dba-password dropdb: $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --prompt-for-dba-password force-dropdb: $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba-password '' --force critic: perlcritic --quiet sbin bin lib libs-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type d -print ) | while read dir ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done html-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type d -print ) | while read dir ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ $(MAKE) clean-mason-cache font-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd share/fonts && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done po-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LEXICON_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd share/po && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/po/$$file" "$(DESTDIR)$(RT_LEXICON_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done static-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_STATIC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_STATIC_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd share/static && find . -type d -print ) | while read dir ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_STATIC_PATH)/$$dir" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -( cd share/static && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/static/$$file" "$(DESTDIR)$(RT_STATIC_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done doc-install: @COMMENT_INPLACE_LAYOUT@ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir @COMMENT_INPLACE_LAYOUT@ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH) @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH) @COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type d -print ) | while read dir ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_DOC_PATH)/$$dir" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type f -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "docs/$$file" "$(DESTDIR)$(RT_DOC_PATH)/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/ etc-install: @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH) @COMMENT_INPLACE_LAYOUT@ for file in $(ETC_FILES) ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH)/upgrade ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)/upgrade @COMMENT_INPLACE_LAYOUT@ -( cd etc/upgrade && find . -type d -print ) | while read dir ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$dir" ; \ @COMMENT_INPLACE_LAYOUT@ done @COMMENT_INPLACE_LAYOUT@ -( cd etc/upgrade && find . -type f -not -name '*.in' -print ) | while read file ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/upgrade/$$file" "$(DESTDIR)$(RT_ETC_PATH)/upgrade/$$file" ; \ @COMMENT_INPLACE_LAYOUT@ done sbin-install: @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH) @COMMENT_INPLACE_LAYOUT@ for file in $(SYSTEM_BINARIES) ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \ @COMMENT_INPLACE_LAYOUT@ done bin-install: @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH) @COMMENT_INPLACE_LAYOUT@ for file in $(BINARIES) ; do \ @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \ @COMMENT_INPLACE_LAYOUT@ done regenerate-catalogs: $(PERL) devel/tools/extract-message-catalog license-tag: $(PERL) devel/tools/license_tag start-httpd: $(PERL) sbin/standalone_httpd & start-server: $(PERL) sbin/rt-server & SNAPSHOT=$(shell git describe --tags) THIRD_PARTY=devel/third-party/ snapshot: build-snapshot build-third-party clearsign-snapshot clearsign-third-party snapshot-shasums build-snapshot: git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf - ( cd $(SNAPSHOT) && \ echo "$(SNAPSHOT)" > .tag && \ autoconf && \ INSTALL=./install-sh PERL=/usr/bin/perl ./configure \ --with-db-type=SQLite \ --enable-layout=relative \ --with-web-handler=standalone && \ rm -rf autom4te.cache \ config.status config.log config.pld \ ) tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/" rm -fr "$(SNAPSHOT)/" clearsign-snapshot: gpg --armor --detach-sign "$(SNAPSHOT).tar.gz" build-third-party: git archive --prefix "$(SNAPSHOT)/$(THIRD_PARTY)" HEAD:$(THIRD_PARTY) \ | gzip > "$(SNAPSHOT)-third-party-source.tar.gz" rm -rf "$(SNAPSHOT)/$(THIRD_PARTY)" clearsign-third-party: gpg --armor --detach-sign "$(SNAPSHOT)-third-party-source.tar.gz" snapshot-shasums: sha1sum $(SNAPSHOT)*.tar.gz* vessel-import: build-snapshot [ -d $(VESSEL) ] || (echo "VESSEL isn't a path to your shipwright vessel" && exit -1) cp $(VESSEL)/scripts/RT/build.pl /tmp/build.pl ./sbin/rt-test-dependencies --with-standalone --with-fastcgi --with-sqlite --list > /tmp/rt.yml shipwright import file:$(SNAPSHOT).tar.gz \ --require-yml /tmp/rt.yml \ --build-script /tmp/build.pl \ --name RT \ --repository fs:$(VESSEL) \ --log-level=info \ --skip cpan-capitalization,cpan-mod_perl,cpan-Encode,cpan-PPI,cpan-Test-Exception-LessClever,cpan-Test-Manifest,cpan-Test-Object,cpan-Test-Pod,cpan-Test-Requires,cpan-Test-SubCalls,cpan-Test-cpan-Tester,cpan-Test-Warn --skip-all-recommends mv $(VESSEL)/scripts/RT/build $(VESSEL)/scripts/RT/build.pl JSMIN_URL = http://download.bestpractical.com/mirror/jsmin-2013-03-29.c JSMIN_SHA = 67dc8d73a8878f88cdaeb1a86775872eae5c3077 jsmin: jsmin-checkcc jsmin-fetch jsmin-verify jsmin-confirm jsmin-build jsmin-install @echo "" @echo "To configure RT to use jsmin, add the following line to $(DESTDIR)$(RT_ETC_PATH)/RT_SiteConfig.pm:" @echo "" @echo " Set(\$$JSMinPath, '$(DESTDIR)$(RT_BIN_PATH)/jsmin');" @echo "" jsmin-checkcc: @[ -n "$(CC)" ] || (echo "You don't appear to have a C compiler, please set CC and re-run configure" && exit 1) jsmin-confirm: @echo "jsmin is distributed under a slightly unusual license and can't be shipped" @echo "with RT. Before configuring RT to use jsmin, please read jsmin's license" @echo "below:" @echo "" @$(PERL) -pe 'print && exit if /^\*\// or /^#include/' jsmin.c @echo "" @echo "Press Enter to accept the license, or Ctrl-C to stop now." @$(PERL) -e '' jsmin-fetch: @echo "" @echo "Downloading jsmin.c from $(JSMIN_URL)" @echo "" @$(PERL) -MLWP::Simple -e 'exit not is_success(getstore("$(JSMIN_URL)", "jsmin.c"))' \ || (echo "Failed to download $(JSMIN_URL)" && exit 1) jsmin-verify: @$(PERL) -MDigest::SHA -e \ 'exit not Digest::SHA->new(1)->addfile("jsmin.c")->hexdigest eq "$(JSMIN_SHA)"' \ || (echo "Verification of jsmin.c failed! Possible man in the middle?" && exit 1) jsmin-build: $(CC) -o jsmin jsmin.c jsmin-install: $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "jsmin" "$(DESTDIR)$(RT_BIN_PATH)/"