package FS::part_export::saisei; use strict; use vars qw( @ISA %info ); use base qw( FS::part_export ); use Date::Format 'time2str'; use Cpanel::JSON::XS; use MIME::Base64; use REST::Client; use Data::Dumper; use FS::Conf; use Carp qw(carp); =pod =head1 NAME FS::part_export::saisei =head1 SYNOPSIS Saisei integration for Freeside =head1 DESCRIPTION This export offers basic svc_broadband provisioning for Saisei. This is a customer integration with Saisei. This will set up a rate plan and tie the rate plan to a host and the access point via the Saisei API when the broadband service is provisioned. It will also untie the host from the rate plan, setting it to the default rate plan via the API upon unprovisioning of the broadband service. This will create and modify the rate plans at Saisei as soon as the broadband service attached to this export is created or modified. This will also create and modify an access point at Saisei as soon as the tower is created or modified. To use this export, follow the below instructions: Create a new service definition and set the table to svc_broadband. The service name will become the Saisei rate plan name. Set the upload and download speed for the service. This is required to be able to export the service to Saisei. Attach this Saisei export to this service. Create a tower and add a sector to that tower. The sector name will be the name of the access point, Make sure you have set the up and down rate limit for the tower and the sector. This is required to be able to export the access point. The tower and sector will be set up as access points at Saisei upon the creation of the tower or sector. They will be modified at Saisei when modified in freeside. Each sector will be attached to its tower access point using the Saisei uplink field. Each access point will be attached to the interface set in the export config. If left blank access point will be attached to the default interface. Most setups can leave this blank. Create a package for the above created service, and order this package for a customer. Provision the service, making sure to enter the IP address associated with this service and select the tower and sector for it's access point. This provisioned service will then be exported as a host to Saisei. Unprovisioning this service will set the host entry at Saisei to the default rate plan with the user and access point set to . After this export is set up and attached to a service, you can export the already provisioned services by clicking the link Export provisioned services attached to this export. Clicking on this link will export all services attached to this export not currently exported to Saisei. This module also provides generic methods for working through the L. =cut tie my %scripts, 'Tie::IxHash', 'export_provisioned_services' => { component => '/elements/popup_link.html', label => 'Export provisioned services', description => 'will export provisioned services of part service with Saisei export attached.', html_label => 'Export provisioned services attached to this export.', error_url => '/edit/part_export.cgi?', success_message => 'Saisei export of provisioned services successful', }, 'export_all_towers_sectors' => { component => '/elements/popup_link.html', label => 'Export of all towers and sectors', description => 'Will force an export of all towers and sectors to Saisei as access points.', html_label => 'Export all towers and sectors.', error_url => '/edit/part_export.cgi?', success_message => 'Saisei export of towers and sectors as access points successful', }, ; tie my %options, 'Tie::IxHash', 'port' => { label => 'Port', default => 5000 }, 'username' => { label => 'Saisei API User Name', default => '' }, 'password' => { label => 'Saisei API Password', default => '' }, 'interface' => { label => 'Saisei Access Point Interface', default => '' }, 'debug' => { type => 'checkbox', label => 'Enable debug warnings' }, ; %info = ( 'svc' => 'svc_broadband', 'desc' => 'Export broadband service/account to Saisei', 'options' => \%options, 'scripts' => \%scripts, 'notes' => <<'END', This is a customer integration with Saisei. This will set up a rate plan and tie the rate plan to a host and the access point via the Saisei API when the broadband service is provisioned. It will also untie the host from the rate plan, setting it to the default rate plan via the API upon unprovisioning of the broadband service.

This will create and modify the rate plans at Saisei as soon as the broadband service attached to this export is created or modified. This will also create and modify an access point at Saisei as soon as the tower is created or modified.

To use this export, follow the below instructions:

  1. Create a new service definition and set the table to svc_broadband. The service name will become the Saisei rate plan name. Set the upload speed, download speed, and tower to be required for the service. This is required to be able to export the service to Saisei. Attach this Saisei export to this service.
  2. Create a tower and add a sector to that tower. The sector name will be the name of the access point, Make sure you have set the up and down rate limit for the tower and the sector. This is required to be able to export the access point. The tower and sector will be set up as access points at Saisei upon the creation of the tower or sector. They will be modified at Saisei when modified in freeside. Each sector will be attached to its tower access point using the Saisei uplink field. Each access point will be attached to the interface set in the export config. If left blank access point will be attached to the default interface. Most setups can leave this blank.
  3. Create a package for the above created service, and order this package for a customer.
  4. Provision the service, making sure to enter the IP address associated with this service, the upload and download speed are correct, and select the tower and sector for it's access point. This provisioned service will then be exported as a host to Saisei.

    Unprovisioning this service will set the host entry at Saisei to the default rate plan with the user and access point set to none.

  5. After this export is set up and attached to a service, you can export the already provisioned services by clicking the link Export provisioned services attached to this export. Clicking on this link will export all services attached to this export not currently exported to Saisei.

Documentation END ); sub _export_insert { my ($self, $svc_broadband) = @_; my $rateplan_name = $self->get_rateplan_name($svc_broadband); # check for existing rate plan my $existing_rateplan; $existing_rateplan = $self->api_get_rateplan($rateplan_name) unless $self->{'__saisei_error'}; # if no existing rate plan create one and modify it. $self->api_create_rateplan($svc_broadband, $rateplan_name) unless $existing_rateplan; $self->api_modify_rateplan($svc_broadband, $rateplan_name) unless ($self->{'__saisei_error'} || $existing_rateplan); return $self->api_error if $self->{'__saisei_error'}; # set rateplan to existing one or newly created one. my $rateplan = $existing_rateplan ? $existing_rateplan : $self->api_get_rateplan($rateplan_name); my $username = $svc_broadband->{Hash}->{svcnum}; my $description = $svc_broadband->{Hash}->{description}; my $svc_location; $svc_location = $svc_broadband->{Hash}->{latitude}.','.$svc_broadband->{Hash}->{longitude} if ($svc_broadband->{Hash}->{latitude} && $svc_broadband->{Hash}->{longitude}); if (!$username) { $self->{'__saisei_error'} = 'no username - can not export'; return $self->api_error; } else { # check for existing user. my $existing_user; $existing_user = $self->api_get_user($username) unless $self->{'__saisei_error'}; # if no existing user create one. $self->api_create_user($username, $description, $svc_location) unless $existing_user; return $self->api_error if $self->{'__saisei_error'}; # set user to existing one or newly created one. my $user = $existing_user ? $existing_user : $self->api_get_user($username); ## add access point my $tower_sector = FS::Record::qsearchs({ 'table' => 'tower_sector', 'select' => 'tower.towername, tower.up_rate_limit as tower_upratelimit, tower.down_rate_limit as tower_downratelimit, tower_sector.sectorname, tower_sector.towernum, tower_sector.up_rate_limit as sector_upratelimit, tower_sector.down_rate_limit as sector_downratelimit, tower.latitude, tower.longitude', 'addl_from' => 'LEFT JOIN tower USING ( towernum )', 'hashref' => { 'sectornum' => $svc_broadband->{Hash}->{sectornum}, }, }); my $tower_location; $tower_location = $tower_sector->{Hash}->{latitude}.','.$tower_sector->{Hash}->{longitude} if ($tower_sector->{Hash}->{latitude} && $tower_sector->{Hash}->{longitude}); my $tower_name = $tower_sector->{Hash}->{towername}; $tower_name =~ s/\s/_/g; my $tower_opt = { 'tower_name' => $tower_name, 'tower_num' => $tower_sector->{Hash}->{towernum}, 'tower_uprate_limit' => $tower_sector->{Hash}->{tower_upratelimit}, 'tower_downrate_limit' => $tower_sector->{Hash}->{tower_downratelimit}, }; $tower_opt->{'location'} = $tower_location if $tower_location; my $tower_ap = process_tower($self, $tower_opt); return $self->api_error if $self->{'__saisei_error'}; my $sector_name = $tower_sector->{Hash}->{sectorname}; $sector_name =~ s/\s/_/g; my $sector_opt = { 'tower_name' => $tower_name, 'tower_num' => $tower_sector->{Hash}->{towernum}, 'sector_name' => $sector_name, 'sector_uprate_limit' => $tower_sector->{Hash}->{sector_upratelimit}, 'sector_downrate_limit' => $tower_sector->{Hash}->{sector_downratelimit}, 'rateplan' => $rateplan_name, }; $sector_opt->{'location'} = $tower_location if $tower_location; my $accesspoint = process_sector($self, $sector_opt); return $self->api_error if $self->{'__saisei_error'}; ## get custnum and pkgpart from cust_pkg for virtual access point my $cust_pkg = FS::Record::qsearchs({ 'table' => 'cust_pkg', 'hashref' => { 'pkgnum' => $svc_broadband->{Hash}->{pkgnum}, }, }); my $virtual_ap_name = $cust_pkg->{Hash}->{custnum}.'_'.$cust_pkg->{Hash}->{pkgpart}.'_'.$svc_broadband->{Hash}->{speed_down}.'_'.$svc_broadband->{Hash}->{speed_up}; my $virtual_ap_opt = { 'virtual_name' => $virtual_ap_name, 'sector_name' => $sector_name, 'virtual_uprate_limit' => $svc_broadband->{Hash}->{speed_up}, 'virtual_downrate_limit' => $svc_broadband->{Hash}->{speed_down}, }; my $virtual_ap = process_virtual_ap($self, $virtual_ap_opt); return $self->api_error if $self->{'__saisei_error'}; ## tie host to user add sector name as access point. my $host_opt = { 'user' => $user->{collection}->[0]->{name}, 'rateplan' => $rateplan->{collection}->[0]->{name}, 'ip' => $svc_broadband->{Hash}->{ip_addr}, 'accesspoint' => $virtual_ap->{collection}->[0]->{name}, 'location' => $svc_location, }; $self->api_add_host_to_user($host_opt) unless $self->{'__saisei_error'}; } return $self->api_error; } sub _export_replace { my ($self, $svc_broadband) = @_; my $error = $self->_export_insert($svc_broadband); return $error; } sub _export_delete { my ($self, $svc_broadband) = @_; my $rateplan_name = $self->get_rateplan_name($svc_broadband); my $username = $svc_broadband->{Hash}->{svcnum}; ## untie host to user $self->api_delete_host_to_user($username, $rateplan_name, $svc_broadband->{Hash}->{ip_addr}) unless $self->{'__saisei_error'}; return ''; } sub _export_suspend { my ($self, $svc_broadband) = @_; return ''; } sub _export_unsuspend { my ($self, $svc_broadband) = @_; return ''; } sub export_partsvc { my ($self, $svc_part) = @_; if ( $FS::svc_Common::noexport_hack ) { carp 'export_partsvc() suppressed by noexport_hack' if $self->option('debug'); return; } my $fcc_477_speeds; if ($svc_part->{Hash}->{svc_broadband__speed_down} eq "down" || $svc_part->{Hash}->{svc_broadband__speed_up} eq "up") { for my $type (qw( down up )) { my $speed_type = "broadband_".$type."stream"; foreach my $pkg_svc (FS::Record::qsearch({ 'table' => 'pkg_svc', 'select' => 'pkg_svc.*, part_pkg_fcc_option.fccoptionname, part_pkg_fcc_option.optionvalue', 'addl_from' => ' LEFT JOIN part_pkg_fcc_option USING (pkgpart) ', 'extra_sql' => " WHERE pkg_svc.svcpart = ".$svc_part->{Hash}->{svcpart}." AND pkg_svc.quantity > 0 AND part_pkg_fcc_option.fccoptionname = '".$speed_type."'", })) { $fcc_477_speeds->{ $pkg_svc->{Hash}->{pkgpart}}->{$speed_type} = $pkg_svc->{Hash}->{optionvalue} * 1000 unless !$pkg_svc->{Hash}->{optionvalue}; } } } else { $fcc_477_speeds->{1}->{broadband_downstream} = $svc_part->{Hash}->{"svc_broadband__speed_down"}; $fcc_477_speeds->{1}->{broadband_upstream} = $svc_part->{Hash}->{"svc_broadband__speed_up"}; } foreach my $key (keys %$fcc_477_speeds) { $svc_part->{Hash}->{speed_down} = $fcc_477_speeds->{$key}->{broadband_downstream}; $svc_part->{Hash}->{speed_up} = $fcc_477_speeds->{$key}->{broadband_upstream}; $svc_part->{Hash}->{svc_broadband__speed_down} = $fcc_477_speeds->{$key}->{broadband_downstream}; $svc_part->{Hash}->{svc_broadband__speed_up} = $fcc_477_speeds->{$key}->{broadband_upstream}; my $temp_svc = $svc_part->{Hash}; my $svc_broadband = {}; map { if ($_ =~ /^svc_broadband__(.*)$/) { $svc_broadband->{Hash}->{$1} = $temp_svc->{$_}; } } keys %$temp_svc; my $rateplan_name = $self->get_rateplan_name($svc_broadband, $svc_part->{Hash}->{svc}); # check for existing rate plan my $existing_rateplan; $existing_rateplan = $self->api_get_rateplan($rateplan_name) unless $self->{'__saisei_error'}; # Modify the existing rate plan with new service data. $self->api_modify_existing_rateplan($svc_broadband, $rateplan_name) unless ($self->{'__saisei_error'} || !$existing_rateplan); # if no existing rate plan create one and modify it. $self->api_create_rateplan($svc_broadband, $rateplan_name) unless $existing_rateplan; $self->api_modify_rateplan($svc_part, $rateplan_name) unless ($self->{'__saisei_error'} || $existing_rateplan); } return $self->api_error; } sub export_tower_sector { my ($self, $tower) = @_; if ( $FS::svc_Common::noexport_hack ) { carp 'export_tower_sector() suppressed by noexport_hack' if $self->option('debug'); return; } my $tower_location; $tower_location = $tower->{Hash}->{latitude}.','.$tower->{Hash}->{longitude} if ($tower->{Hash}->{latitude} && $tower->{Hash}->{longitude}); #modify tower or create it. my $tower_name = $tower->{Hash}->{towername}; $tower_name =~ s/\s/_/g; my $tower_opt = { 'tower_name' => $tower_name, 'tower_num' => $tower->{Hash}->{towernum}, 'tower_uprate_limit' => $tower->{Hash}->{up_rate_limit}, 'tower_downrate_limit' => $tower->{Hash}->{down_rate_limit}, 'modify_existing' => '1', # modify an existing access point with this info }; $tower_opt->{'location'} = $tower_location if $tower_location; my $tower_access_point = process_tower($self, $tower_opt); return $tower_access_point if $tower_access_point->{error}; #get list of all access points my $hash_opt = { 'table' => 'tower_sector', 'select' => '*', 'hashref' => { 'towernum' => $tower->{Hash}->{towernum}, }, }; #for each one modify or create it. foreach my $tower_sector ( FS::Record::qsearch($hash_opt) ) { next if $tower_sector->{Hash}->{sectorname} eq "_default"; my $sector_name = $tower_sector->{Hash}->{sectorname}; $sector_name =~ s/\s/_/g; my $sector_opt = { 'tower_name' => $tower_name, 'tower_num' => $tower_sector->{Hash}->{towernum}, 'sector_name' => $sector_name, 'sector_uprate_limit' => $tower_sector->{Hash}->{up_rate_limit}, 'sector_downrate_limit' => $tower_sector->{Hash}->{down_rate_limit}, 'modify_existing' => '1', # modify an existing access point with this info }; $sector_opt->{'location'} = $tower_location if $tower_location; my $sector_access_point = process_sector($self, $sector_opt) unless ($sector_name eq "_default"); return $sector_access_point if $sector_access_point->{error}; } return { error => $self->api_error, }; } ## creates the rateplan name sub get_rateplan_name { my ($self, $svc_broadband, $svc_name) = @_; my $service_part = FS::Record::qsearchs( 'part_svc', { 'svcpart' => $svc_broadband->{Hash}->{svcpart} } ) unless $svc_name; my $service_name = $svc_name ? $svc_name : $service_part->{Hash}->{svc}; my $rateplan_name = $service_name . " " . $svc_broadband->{Hash}->{speed_down} . "-" . $svc_broadband->{Hash}->{speed_up}; $rateplan_name =~ s/\s/_/g; $rateplan_name =~ s/[^A-Za-z0-9\-_]//g; return $rateplan_name; } =head1 Saisei API These methods allow access to the Saisei API using the credentials set in the export options. =cut =head2 api_call Accepts I<$method>, I<$path>, I<$params> hashref and optional. Places an api call to the specified path and method with the specified params. Returns the decoded json object returned by the api call. Returns empty on failure; retrieve error messages using L. =cut sub api_call { my ($self,$method,$path,$params) = @_; $self->{'__saisei_error'} = ''; my $auth_info = $self->option('username') . ':' . $self->option('password'); $params ||= {}; warn "Calling $method on http://" .$self->{Hash}->{machine}.':'.$self->option('port') ."/rest/top/configurations/running/$path\n" if $self->option('debug'); my $data = encode_json($params) if keys %{ $params }; my $client = REST::Client->new(); $client->addHeader("Authorization", "Basic ".encode_base64($auth_info)); $client->setHost('http://'.$self->{Hash}->{machine}.':'.$self->option('port')); $client->$method('/rest/top/configurations/running'.$path, $data, { "Content-type" => 'application/json'}); warn "Saisei Response Code is ".$client->responseCode()."\n" if $self->option('debug'); my $result; if ($client->responseCode() eq '200' || $client->responseCode() eq '201') { eval { $result = decode_json($client->responseContent()) }; unless ($result) { $self->{'__saisei_error'} = "There was an error decoding the JSON data from Saisei. Bad JSON data logged in error log if debug option was set."; warn "Saisei RC 201 Response Content is not json\n".$client->responseContent()."\n" if $self->option('debug'); return; } } elsif ($client->responseCode() eq '404') { eval { $result = decode_json($client->responseContent()) }; unless ($result) { $self->{'__saisei_error'} = "There was an error decoding the JSON data from Saisei. Bad JSON data logged in error log if debug option was set."; warn "Saisei RC 404 Response Content is not json\n".$client->responseContent()."\n" if $self->option('debug'); return; } ## check if message is for empty hash. my($does_not_exist) = $result->{message} =~ /'(.*)' does not exist$/; $self->{'__saisei_error'} = "Saisei Error: ".$result->{message} unless $does_not_exist; warn "Saisei Response Content is\n".$client->responseContent."\n" if ($self->option('debug') && !$does_not_exist); return; } elsif ($client->responseCode() eq '500') { $self->{'__saisei_error'} = "Could not connect to the Saisei export host machine (".$self->{Hash}->{machine}.':'.$self->option('port').") during $method , we received the responce code: " . $client->responseCode(); warn "Saisei Response Content is\n".$client->responseContent."\n" if $self->option('debug'); return; } else { $self->{'__saisei_error'} = "Received Bad response from server during $method $path $data, we received responce code: " . $client->responseCode() . " " . $client->responseContent; warn "Saisei Response Content is\n".$client->responseContent."\n" if $self->option('debug'); return; } return $result; } =head2 api_error Returns the error string set by L methods, or a blank string if most recent call produced no errors. =cut sub api_error { my $self = shift; return $self->{'__saisei_error'} || ''; } =head2 api_get_policies Gets a list of global policies. =cut sub api_get_policies { my $self = shift; my $get_policies = $self->api_call("GET", '/policies/?token=1&order=name&start=0&limit=20&select=name%2Cpercent_rate%2Cassured%2C'); return if $self->api_error; $self->{'__saisei_error'} = "Did not receive any global policies from Saisei." unless $get_policies; return $get_policies->{collection}; } =head2 api_get_rateplan Gets rateplan info for specific rateplan. =cut sub api_get_rateplan { my $self = shift; my $rateplan = shift; my $get_rateplan = $self->api_call("GET", "/rate_plans/$rateplan"); return if $self->api_error; return $get_rateplan; } =head2 api_get_user Gets user info for specific user. =cut sub api_get_user { my $self = shift; my $user = shift; my $get_user = $self->api_call("GET", "/users/$user"); return if $self->api_error; return $get_user; } =head2 api_get_accesspoint Gets user info for specific access point. =cut sub api_get_accesspoint { my $self = shift; my $accesspoint = shift; my $get_accesspoint = $self->api_call("GET", "/access_points/$accesspoint"); return if $self->api_error; return $get_accesspoint; } =head2 api_get_host Gets user info for specific host. =cut sub api_get_host { my $self = shift; my $ip = shift; my $get_host = $self->api_call("GET", "/hosts/$ip"); return { message => $self->api_error, } if $self->api_error; return $get_host; } =head2 api_create_rateplan Creates a rateplan. =cut sub api_create_rateplan { my ($self, $svc, $rateplan) = @_; $self->{'__saisei_error'} = "There is no download speed set for the service !--service,".$svc->{Hash}->{svcnum}.",".$rateplan."--! with host (".$svc->{Hash}->{ip_addr}."). All services that are to be exported to Saisei need to have a download speed set for them." if !$svc->{Hash}->{speed_down}; $self->{'__saisei_error'} = "There is no upload speed set for the service !--service,".$svc->{Hash}->{svcnum}.",".$rateplan."--! with host (".$svc->{Hash}->{ip_addr}."). All services that are to be exported to Saisei need to have a upload speed set for them." if !$svc->{Hash}->{speed_up}; my $new_rateplan = $self->api_call( "PUT", "/rate_plans/$rateplan", { 'downstream_rate' => $svc->{Hash}->{speed_down}, 'upstream_rate' => $svc->{Hash}->{speed_up}, }, ) unless $self->{'__saisei_error'}; $self->{'__saisei_error'} = "Saisei could not create the rate plan $rateplan." unless ($new_rateplan || $self->{'__saisei_error'}); return $new_rateplan; } =head2 api_modify_rateplan Modify a new rateplan. =cut sub api_modify_rateplan { my ($self,$svc,$rateplan_name) = @_; # get policy list my $policies = $self->api_get_policies(); foreach my $policy (@$policies) { my $policyname = $policy->{name}; my $rate_multiplier = ''; if ($policy->{background}) { $rate_multiplier = ".01"; } my $modified_rateplan = $self->api_call( "PUT", "/rate_plans/$rateplan_name/partitions/$policyname", { 'restricted' => $policy->{assured}, # policy_assured_flag 'rate_multiplier' => $rate_multiplier, # policy_background 0.1 'rate' => $policy->{percent_rate}, # policy_percent_rate }, ); $self->{'__saisei_error'} = "Saisei could not modify the rate plan $rateplan_name after it was created." unless ($modified_rateplan || $self->{'__saisei_error'}); # should never happen } return; } =head2 api_modify_existing_rateplan Modify a existing rateplan. =cut sub api_modify_existing_rateplan { my ($self,$svc,$rateplan_name) = @_; $self->{'__saisei_error'} = "There is no download speed set for the service !--service,".$svc->{Hash}->{svcnum}.",".$rateplan_name."--! with host (".$svc->{Hash}->{ip_addr}."). All services that are to be exported to Saisei need to have a download speed set for them." if !$svc->{Hash}->{speed_down}; $self->{'__saisei_error'} = "There is no upload speed set for the service !--service,".$svc->{Hash}->{svcnum}.",".$rateplan_name."--! with host (".$svc->{Hash}->{ip_addr}."). All services that are to be exported to Saisei need to have a upload speed set for them." if !$svc->{Hash}->{speed_up}; my $modified_rateplan = $self->api_call( "PUT", "/rate_plans/$rateplan_name", { 'downstream_rate' => $svc->{Hash}->{speed_down}, 'upstream_rate' => $svc->{Hash}->{speed_up}, }, ); $self->{'__saisei_error'} = "Saisei could not modify the rate plan $rateplan_name." unless ($modified_rateplan || $self->{'__saisei_error'}); # should never happen return; } =head2 api_create_user Creates a user. =cut sub api_create_user { my ($self,$user, $description, $location) = @_; my $user_hash = { 'description' => $description, }; $user_hash->{'map_location'} = $location if $location; my $new_user = $self->api_call( "PUT", "/users/$user", $user_hash, ); $self->{'__saisei_error'} = "Saisei could not create the user $user" unless ($new_user || $self->{'__saisei_error'}); # should never happen return $new_user; } =head2 api_create_accesspoint Creates a access point. =cut sub api_create_accesspoint { my ($self,$accesspoint, $upratelimit, $downratelimit, $location) = @_; my $ap_hash = { 'downstream_rate_limit' => $downratelimit, 'upstream_rate_limit' => $upratelimit, 'interface' => $self->option('interface'), }; $ap_hash->{'map_location'} = $location if $location; my $new_accesspoint = $self->api_call( "PUT", "/access_points/$accesspoint", $ap_hash, ); $self->{'__saisei_error'} = "Saisei could not create the access point $accesspoint" unless ($new_accesspoint || $self->{'__saisei_error'}); # should never happen return; } =head2 api_modify_accesspoint Modify a new access point. =cut sub api_modify_accesspoint { my ($self, $accesspoint, $uplink, $location) = @_; my $ap_hash = { 'uplink' => $uplink, 'interface' => $self->option('interface'), }; $ap_hash->{'map_location'} = $location if $location; my $modified_accesspoint = $self->api_call( "PUT", "/access_points/$accesspoint", $ap_hash, ); $self->{'__saisei_error'} = "Saisei could not modify the access point $accesspoint after it was created." unless ($modified_accesspoint || $self->{'__saisei_error'}); # should never happen return; } =head2 api_modify_existing_accesspoint Modify a existing accesspoint. =cut sub api_modify_existing_accesspoint { my ($self, $accesspoint, $uplink, $upratelimit, $downratelimit, $location) = @_; my $ap_hash = { 'downstream_rate_limit' => $downratelimit, 'upstream_rate_limit' => $upratelimit, 'interface' => $self->option('interface'), # 'uplink' => $uplink, # name of attached access point }; $ap_hash->{'map_location'} = $location if $location; my $modified_accesspoint = $self->api_call( "PUT", "/access_points/$accesspoint", $ap_hash, ); $self->{'__saisei_error'} = "Saisei could not modify the access point $accesspoint." unless ($modified_accesspoint || $self->{'__saisei_error'}); # should never happen return; } =head2 api_add_host_to_user ties host to user, rateplan and default access point. =cut sub api_add_host_to_user { # my ($self,$user, $rateplan, $ip, $accesspoint, $location) = @_; my ($self,$opt) = @_; my $ip = $opt->{'ip'}; my $location = $opt->{'location'}; my $newhost_hash = { 'user' => $opt->{'user'}, 'rate_plan' => $opt->{'rateplan'}, 'access_point' => $opt->{'accesspoint'}, }; $newhost_hash->{'map_location'} = $location if $location; my $new_host = $self->api_call( "PUT", "/hosts/$ip", $newhost_hash, ); $self->{'__saisei_error'} = "Saisei could not create the host $ip" unless ($new_host || $self->{'__saisei_error'}); # should never happen return $new_host; } =head2 api_delete_host_to_user unties host from user and rateplan. this will set the host entry at Saisei to the default rate plan with the user and access point set to . =cut sub api_delete_host_to_user { my ($self,$user, $rateplan, $ip) = @_; my $default_rate_plan = $self->api_call("GET", '?token=1&select=default_rate_plan'); return if $self->api_error; $self->{'__saisei_error'} = "Can not delete the host as Saisei did not return a default rate plan. Please make sure Saisei has a default rateplan setup." unless $default_rate_plan; my $default_rateplan_name = $default_rate_plan->{collection}->[0]->{default_rate_plan}->{link}->{name}; my $delete_host = $self->api_call( "PUT", "/hosts/$ip", { 'user' => '', 'access_point' => '', 'rate_plan' => $default_rateplan_name, }, ); $self->{'__saisei_error'} = "Saisei could not delete the host $ip" unless ($delete_host || $self->{'__saisei_error'}); # should never happen return $delete_host; } sub process_tower { my ($self, $opt) = @_; if (!$opt->{tower_uprate_limit} || !$opt->{tower_downrate_limit}) { $self->{'__saisei_error'} = "Could not export tower !--tower,".$opt->{tower_num}.",".$opt->{tower_name}."--! because there was no up or down rates attached to the tower. Saisei requires a up and down rate be attached to each tower."; return { error => $self->api_error, }; } my $existing_tower_ap; my $tower_name = $opt->{tower_name}; my $location = $opt->{location}; #check if tower has been set up as an access point. $existing_tower_ap = $self->api_get_accesspoint($tower_name) unless $self->{'__saisei_error'}; # modify the existing accesspoint if changing tower . $self->api_modify_existing_accesspoint ( $tower_name, '', # tower does not have a uplink on sectors. $opt->{tower_uprate_limit}, $opt->{tower_downrate_limit}, $location, ) if $existing_tower_ap->{collection} && $opt->{modify_existing}; #if tower does not exist as an access point create it. $self->api_create_accesspoint( $tower_name, $opt->{tower_uprate_limit}, $opt->{tower_downrate_limit}, $location, ) unless $existing_tower_ap->{collection}; my $accesspoint = $self->api_get_accesspoint($tower_name); return { error => $self->api_error, } if $self->api_error; return $accesspoint; } sub process_sector { my ($self, $opt) = @_; if (!$opt->{sector_name} || $opt->{sector_name} eq '_default') { $self->{'__saisei_error'} = "No sector attached to Tower (".$opt->{tower_name}.") for service ".$opt->{'rateplan'}.". Saisei requires a tower sector to be attached to each service that is exported to Saisei."; return { error => $self->api_error, }; } if (!$opt->{sector_uprate_limit} || !$opt->{sector_downrate_limit}) { $self->{'__saisei_error'} = "Could not export sector !--tower,".$opt->{tower_num}.",".$opt->{sector_name}."--! because there was no up or down rates attached to the sector. Saisei requires a up and down rate be attached to each sector."; return { error => $self->api_error, }; } my $existing_sector_ap; my $sector_name = $opt->{sector_name}; my $location = $opt->{location}; #check if sector has been set up as an access point. $existing_sector_ap = $self->api_get_accesspoint($sector_name); # modify the existing accesspoint if changing sector . $self->api_modify_existing_accesspoint ( $sector_name, $opt->{tower_name}, $opt->{sector_uprate_limit}, $opt->{sector_downrate_limit}, $location, ) if $existing_sector_ap && $opt->{modify_existing}; #if sector does not exist as an access point create it. $self->api_create_accesspoint( $sector_name, $opt->{sector_uprate_limit}, $opt->{sector_downrate_limit}, $location, ) unless $existing_sector_ap; # Attach newly created sector to it's tower. $self->api_modify_accesspoint($sector_name, $opt->{tower_name}, $location) unless ($self->{'__saisei_error'} || $existing_sector_ap); # set access point to existing one or newly created one. my $accesspoint = $existing_sector_ap ? $existing_sector_ap : $self->api_get_accesspoint($sector_name); return { error => $self->api_error, } if $self->api_error; return $accesspoint; } =head2 require_tower_and_sector sets whether the service export requires a sector with it's tower. =cut sub require_tower_and_sector { 1; } =head2 tower_sector_required_fields required fields needed for tower and sector export. =cut sub tower_sector_required_fields { my $fields = { 'tower' => { 'up_rate_limit' => '1', 'down_rate_limit' => '1', }, 'sector' => { 'up_rate_limit' => '1', 'down_rate_limit' => '1', 'ip_addr' => '1', }, }; return $fields; } sub required_fields { my @fields = ('svc_broadband__ip_addr_required', 'svc_broadband__speed_up_required', 'svc_broadband__speed_down_required', 'svc_broadband__sectornum_required'); return @fields; } sub process_virtual_ap { my ($self, $opt) = @_; my $existing_virtual_ap; my $virtual_name = $opt->{virtual_name}; #check if virtual_ap has been set up as an access point. $existing_virtual_ap = $self->api_get_accesspoint($virtual_name); # modify the existing virtual accesspoint if changing it. this should never happen $self->api_modify_existing_accesspoint ( $virtual_name, $opt->{sector_name}, $opt->{virtual_uprate_limit}, $opt->{virtual_downrate_limit}, ) if $existing_virtual_ap && $opt->{modify_existing}; #if virtual ap does not exist as an access point create it. $self->api_create_accesspoint( $virtual_name, $opt->{virtual_uprate_limit}, $opt->{virtual_downrate_limit}, ) unless $existing_virtual_ap; my $update_sector; if ($existing_virtual_ap && (ref $existing_virtual_ap->{collection}->[0]->{uplink} eq "HASH") && ($existing_virtual_ap->{collection}->[0]->{uplink}->{link}->{name} ne $opt->{sector_name})) { $update_sector = 1; } # Attach newly created virtual ap to tower sector ap or if sector has changed. $self->api_modify_accesspoint($virtual_name, $opt->{sector_name}) unless ($self->{'__saisei_error'} || ($existing_virtual_ap && !$update_sector)); # set access point to existing one or newly created one. my $accesspoint = $existing_virtual_ap ? $existing_virtual_ap : $self->api_get_accesspoint($virtual_name); return $accesspoint; } sub export_provisioned_services { my $job = shift; my $param = shift; my $part_export = FS::Record::qsearchs('part_export', { 'exportnum' => $param->{export_provisioned_services_exportnum}, } ) or die "You are trying to use an unknown exportnum $param->{export_provisioned_services_exportnum}. This export does not exist.\n"; bless $part_export; my @svcparts = FS::Record::qsearch({ 'table' => 'export_svc', 'addl_from' => 'LEFT JOIN part_svc USING ( svcpart ) ', 'hashref' => { 'exportnum' => $param->{export_provisioned_services_exportnum}, }, }); my $part_count = scalar @svcparts; my $parts = join "', '", map { $_->{Hash}->{svcpart} } @svcparts; my @svcs = FS::Record::qsearch({ 'table' => 'cust_svc', 'addl_from' => 'LEFT JOIN svc_broadband USING ( svcnum ) ', 'extra_sql' => " WHERE svcpart in ('".$parts."')", }) unless !$parts; my $svc_count = scalar @svcs; my %status = {}; for (my $c=1; $c <=100; $c=$c+1) { $status{int($svc_count * ($c/100))} = $c; } my $process_count=0; foreach my $svc (@svcs) { if ($status{$process_count}) { my $s = $status{$process_count}; $job->update_statustext($s); } ## check if service exists as host if not export it. my $host = api_get_host($part_export, $svc->{Hash}->{ip_addr}); die ("Please double check your credentials as ".$host->{message}."\n") if $host->{message}; warn "Exporting service ".$svc->{Hash}->{ip_addr}."\n" if ($part_export->option('debug')); my $export_error = _export_insert($part_export,$svc) unless $host->{collection}; if ($export_error) { warn "Error exporting service ".$svc->{Hash}->{ip_addr}."\n" if ($part_export->option('debug')); die ("$export_error\n"); } $process_count++; } return; } sub export_all_towers_sectors { my $job = shift; my $param = shift; my $part_export = FS::Record::qsearchs('part_export', { 'exportnum' => $param->{export_provisioned_services_exportnum}, } ) or die "You are trying to use an unknown exportnum $param->{export_provisioned_services_exportnum}. This export does not exist.\n"; bless $part_export; my @towers = FS::Record::qsearch({ 'table' => 'tower', }); my $tower_count = scalar @towers; my %status = {}; for (my $c=1; $c <=100; $c=$c+1) { $status{int($tower_count * ($c/100))} = $c; } my $process_count=0; foreach my $tower (@towers) { if ($status{$process_count}) { my $s = $status{$process_count}; $job->update_statustext($s); } my $export_error = export_tower_sector($part_export,$tower); if ($export_error->{'error'}) { warn "Error exporting tower/sector (".$tower->{Hash}->{towername}.")\n" if ($part_export->option('debug')); die ($export_error->{'error'}."\n"); } $process_count++; } return; } sub test_export_report { my ($self, $opts) = @_; my @export_error; ## check all part services for export errors my @exports = FS::Record::qsearch('part_export', { 'exporttype' => "saisei", } ); my $export_nums = join "', '", map { $_->{Hash}->{exportnum} } @exports; my $svc_part_export_error; my @svcparts = FS::Record::qsearch({ 'table' => 'part_svc', 'addl_from' => 'LEFT JOIN export_svc USING ( svcpart ) ', 'extra_sql' => " WHERE export_svc.exportnum in ('".$export_nums."')", }); my $part_count = scalar @svcparts; my $svc_part_error; foreach (@svcparts) { my $part_error->{'description'} = $_->svc; $part_error->{'link'} = $opts->{'fsurl'}."/edit/part_svc.cgi?".$_->svcpart; foreach my $s ('speed_up', 'speed_down') { my $speed = $_->part_svc_column($s); if ($speed->columnflag eq "" || $speed->columnflag eq "D") { $part_error->{'errors'}->{$speed->columnname} = "Field ".$speed->columnname." is not set to be required and can be set while provisioning the service." unless $speed->required eq "Y"; } elsif ($speed->columnflag eq "F" || $speed->columnflag eq "S") { $part_error->{'errors'}->{$speed->columnname} = "Field ".$speed->columnname." is set to auto fill while provisioning the service but there is no value set." unless $speed->columnvalue; } elsif ($speed->columnflag eq "P") { my $fcc_speed_name = "broadband_".$speed->columnvalue."stream"; foreach my $part_pkg ( FS::Record::qsearchs({ 'table' => 'part_pkg', 'addl_from' => 'LEFT JOIN pkg_svc USING ( pkgpart ) ', 'extra_sql' => " WHERE pkg_svc.svcpart = ".$_->svcpart, })) { my $pkglink = ''.$part_pkg->pkg.''; $part_error->{'errors'}->{$speed->columnname} = "Field ".$speed->columnname." is set to package FCC 477 information, but package ".$pkglink." does not have FCC ".$fcc_speed_name." set." unless $part_pkg->fcc_option($fcc_speed_name); } } } $part_error->{'errors'}->{'ip_addr'} = "Field IP Address is not set to required" if $_->part_svc_column("ip_addr")->required ne "Y"; $svc_part_error->{$_->svcpart} = $part_error if $part_error->{'errors'}; } $svc_part_export_error->{"services"}->{'description'} = "Service definitions"; $svc_part_export_error->{"services"}->{'count'} = $part_count; $svc_part_export_error->{"services"}->{'errors'} = $svc_part_error if $svc_part_error; push @export_error, $svc_part_export_error; ## check all provisioned cust services for export errors my $parts = join "', '", map { $_->{Hash}->{svcpart} } @svcparts; my $cust_svc_export_error; my @svcs = FS::Record::qsearch({ 'table' => 'cust_svc', 'addl_from' => 'LEFT JOIN svc_broadband USING ( svcnum ) ', 'extra_sql' => " WHERE svcpart in ('".$parts."')", }) unless !$parts; my $svc_count = scalar @svcs; my $cust_svc_error; foreach (@svcs) { my $svc_error->{'description'} = $_->description; $svc_error->{'link'} = $opts->{'fsurl'}."/edit/svc_broadband.cgi?".$_->svcnum; foreach my $s ('speed_up', 'speed_down', 'ip_addr') { $svc_error->{'errors'}->{$s} = "Field ".$s." is not set and is required for this service to be exported to Saisei." unless $_->$s; } my $sector = FS::Record::qsearchs({ 'table' => 'tower_sector', 'extra_sql' => " WHERE sectornum = ".$_->sectornum." AND sectorname != '_default'", }) if $_->sectornum; if (!$sector) { $svc_error->{'errors'}->{'sectornum'} = "No tower sector is set for this service. There needs to be a tower and sector set to be exported to Saisei."; } else { foreach my $s ('up_rate_limit', 'down_rate_limit') { $svc_error->{'errors'}->{'sectornum'} = "The sector ".$sector->description." does not have a ".$s." set. The sector needs a ".$s." set to be exported to Saisei." unless $sector->$s; } } $cust_svc_error->{$_->svcnum} = $svc_error if $svc_error->{'errors'}; } $cust_svc_export_error->{"provisioned_services"}->{'description'} = "Provisioned services"; $cust_svc_export_error->{"provisioned_services"}->{'count'} = $svc_count; $cust_svc_export_error->{"provisioned_services"}->{'errors'} = $cust_svc_error if $cust_svc_error; push @export_error, $cust_svc_export_error; ## check all towers and sectors for export errors my $tower_sector_export_error; my @towers = FS::Record::qsearch({ 'table' => 'tower', }); my $tower_count = scalar @towers; my $towers_error; foreach (@towers) { my $tower_error->{'description'} = $_->towername; $tower_error->{'link'} = $opts->{'fsurl'}."/edit/tower.html?".$_->towernum; foreach my $s ('up_rate_limit', 'down_rate_limit') { $tower_error->{'errors'}->{$s} = "Field ".$s." is not set for the tower, this is required for this tower to be exported to Saisei." unless $_->$s; } my @sectors = FS::Record::qsearch({ 'table' => 'tower_sector', 'extra_sql' => " WHERE towernum = ".$_->towernum." AND sectorname != '_default' AND (up_rate_limit IS NULL OR down_rate_limit IS NULL)", }) if $_->towernum; foreach my $sector (@sectors) { foreach my $s ('up_rate_limit', 'down_rate_limit') { $tower_error->{'errors'}->{'sector_'.$s} = "The sector ".$sector->description." does not have a ".$s." set. The sector needs a ".$s." set to be exported to Saisei." if !$sector->$s; } } $towers_error->{$_->towernum} = $tower_error if $tower_error->{'errors'}; } $tower_sector_export_error->{"tower_sector"}->{'description'} = "Tower / Sector"; $tower_sector_export_error->{"tower_sector"}->{'count'} = $tower_count; $tower_sector_export_error->{"tower_sector"}->{'errors'} = $towers_error if $towers_error; push @export_error, $tower_sector_export_error; return [@export_error]; } =head1 SEE ALSO L =cut 1;