package FS::svc_forward;
use strict;
-use vars qw( @ISA $nossh_hack $conf $shellmachine @qmailmachines @vpopmailmachines);
-use FS::Record qw( fields qsearch qsearchs );
-use FS::svc_Common;
-use FS::cust_svc;
+use vars qw( @ISA $nossh_hack $conf $shellmachine @qmailmachines
+ @vpopmailmachines );
use Net::SSH qw(ssh);
use FS::Conf;
+use FS::Record qw( fields qsearch qsearchs dbh );
+use FS::svc_Common;
+use FS::cust_svc;
use FS::svc_acct;
use FS::svc_domain;
#ask FS::UID to run this stuff for us later
$FS::UID::callback{'FS::svc_forward'} = sub {
$conf = new FS::Conf;
- $shellmachine = $conf->exists('qmailmachines')
- ? $conf->config('shellmachine')
- : '';
+ if ( $conf->exists('qmailmachines') ) {
+ $shellmachine = $conf->config('shellmachine')
+ } else {
+ $shellmachine = '';
+ }
if ( $conf->exists('vpopmailmachines') ) {
@vpopmailmachines = $conf->config('vpopmailmachines');
+ } else {
+ @vpopmailmachines = ();
}
};
The additional fields pkgnum and svcpart (see L<FS::cust_svc>) should be
defined. An FS::cust_svc record will be created and inserted.
-If the configuration values (see L<FS::Conf>) vpopmailmachines exist, then
+If the configuration value (see L<FS::Conf>) vpopmailmachines exists, then
the command:
- [ -d /home/vpopmail/$vdomain/$source ] || {
- echo "$destination" >> /home/vpopmail/$vdomain/$source/.$qmail
- chown $vpopuid:$vpopgid /home/vpopmail/$vdomain/$source/.$qmail
+ [ -d $vpopdir/domains/$domain/$source ] && {
+ echo "$destination" >> $vpopdir/domains/$domain/$username/.$qmail
+ chown $vpopuid:$vpopgid $vpopdir/domains/$domain/$username/.$qmail
}
-is executed on each vpopmailmachine via ssh (see L<dot-qmail/"EXTENSION ADDRESSES">).
-This behaviour can be surpressed by setting $FS::svc_forward::nossh_hack true.
+is executed on each vpopmailmachine via ssh (see the vpopmail documentation).
+This behaviour can be supressed by setting $FS::svc_forward::nossh_hack true.
=cut
local $SIG{TSTP} = 'IGNORE';
local $SIG{PIPE} = 'IGNORE';
- $error=$self->check;
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::AutoCommit = 0;
+ my $dbh = dbh;
+
+ $error = $self->check;
return $error if $error;
$error = $self->SUPER::insert;
- return $error if $error;
+ if ($error) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
my $svc_acct = qsearchs( 'svc_acct', { 'svcnum' => $self->srcsvc } );
- my $svc_domain = qsearchs( 'svc_domain', { 'svcnum' => $svc_acct->domsvc } );
- my $source = $svc_acct->username . $svc_domain->domain;
+ my $username = $svc_acct->username;
+ my $domain = $svc_acct->domain;
my $destination;
- if ($self->dstdvc) {
- my $svc_acct = qsearchs( 'svc_acct', { 'svcnum' => $self->dstsvc } );
- my $svc_domain = qsearchs( 'svc_domain', { 'svcnum' => $svc_acct->domsvc } );
- $destination = $svc_acct->username . $svc_domain->domain;
+ if ($self->dstsvc) {
+ $destination = $self->dstsvc_acct->email;
} else {
$destination = $self->dst;
}
- my $vdomain = $svc_acct->domain;
-
foreach my $vpopmailmachine ( @vpopmailmachines ) {
- my ($machine, $vpopdir, $vpopuid, $vpopgid) = split (/\s+/, $vpopmailmachine);
+ my($machine, $vpopdir, $vpopuid, $vpopgid) = split(/\s+/, $vpopmailmachine);
+ my $queue = new FS::queue {
+ 'svcnum' => $self->svcnum,
+ 'job' => 'Net::SSH::ssh_cmd',
+ };
+ # should be neater
+ my $error = $queue->insert("root\@$machine","[ -d $vpopdir/domains/$domain/$username ] && { echo \"$destination\" >> $vpopdir/domains/$domain/$username/.qmail; chown $vpopuid:$vpopgid $vpopdir/domains/$domain/$username/.qmail; }")
+ unless $nossh_hack;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "queueing job (transaction rolled back): $error";
+ }
- ssh("root\@$machine","[ -d $vpopdir/$vdomain/$source ] || { echo $destination >> $vpopdir/$vdomain/$source/.qmail; chown $vpopuid:$vpopgid $vpopdir/$vdomain/$source/.qmail; }")
- if ( ! $nossh_hack && $machine);
}
+ $dbh->commit or die $dbh->errstr if $oldAutoCommit;
''; #no error
}
The corresponding FS::cust_svc record will be deleted as well.
+If the configuration value vpopmailmachines exists, then the command:
+
+ { sed -e '/^$destination/d' <
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail >
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail.temp;
+ mv $vpopdir/domains/$srcdomain/$srcusername/.qmail.temp
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail;
+ chown $vpopuid.$vpopgid $vpopdir/domains/$srcdomain/$srcusername/.qmail; }
+
+
+is executed on each vpopmailmachine via ssh. This behaviour can be supressed
+by setting $FS::svc_forward_nossh_hack true.
+
+=cut
+
+sub delete {
+ my $self = shift;
+
+ local $SIG{HUP} = 'IGNORE';
+ local $SIG{INT} = 'IGNORE';
+ local $SIG{QUIT} = 'IGNORE';
+ local $SIG{TERM} = 'IGNORE';
+ local $SIG{TSTP} = 'IGNORE';
+ local $SIG{PIPE} = 'IGNORE';
+
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::Autocommit = 0;
+ my $dbh = dbh;
+
+ my $error = $self->SUPER::delete;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+
+ my $svc_acct = $self->srcsvc_acct;
+ my $username = $svc_acct->username;
+ my $domain = $svc_acct->domain;
+ my $destination;
+ if ($self->dstsvc) {
+ $destination = $self->dstsvc_acct->email;
+ } else {
+ $destination = $self->dst;
+ }
+ foreach my $vpopmailmachine ( @vpopmailmachines ) {
+ my($machine, $vpopdir, $vpopuid, $vpopgid) =
+ split(/\s+/, $vpopmailmachine);
+ my $queue = new FS::queue { 'job' => 'Net::SSH::ssh_cmd' };
+ # should be neater
+ my $error = $queue->insert("root\@$machine",
+ "sed -e '/^$destination/d' " .
+ "< $vpopdir/domains/$domain/$username/.qmail" .
+ "> $vpopdir/domains/$domain/$username/.qmail.temp; " .
+ "mv $vpopdir/domains/$domain/$username/.qmail.temp " .
+ "$vpopdir/domains/$domain/$username/.qmail; " .
+ "chown $vpopuid.$vpopgid $vpopdir/domains/$domain/$username/.qmail;"
+ )
+ unless $nossh_hack;
+
+ if ($error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "queueing job (transaction rolled back): $error";
+ }
+
+ }
+
+ $dbh->commit or die $dbh->errstr if $oldAutoCommit;
+ '';
+}
+
+
=item replace OLD_RECORD
Replaces OLD_RECORD with this one in the database. If there is an error,
returns the error, otherwise returns false.
+If the configuration value vpopmailmachines exists, then the command:
+
+ { sed -e '/^$destination/d' <
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail >
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail.temp;
+ mv $vpopdir/domains/$srcdomain/$srcusername/.qmail.temp
+ $vpopdir/domains/$srcdomain/$srcusername/.qmail;
+ chown $vpopuid.$vpopgid $vpopdir/domains/$srcdomain/$srcusername/.qmail; }
+
+
+is executed on each vpopmailmachine via ssh. This behaviour can be supressed
+by setting $FS::svc_forward_nossh_hack true.
+
+Also, if the configuration value vpopmailmachines exists, then the command:
+
+ [ -d $vpopdir/domains/$domain/$source ] && {
+ echo "$destination" >> $vpopdir/domains/$domain/$username/.$qmail
+ chown $vpopuid:$vpopgid $vpopdir/domains/$domain/$username/.$qmail
+ }
+
+is executed on each vpopmailmachine via ssh. This behaviour can be supressed
+by setting $FS::svc_forward_nossh_hack true.
+
=cut
sub replace {
my ( $new, $old ) = ( shift, shift );
- my $error;
- $new->SUPER::replace($old);
+ if ( $new->srcsvc != $old->srcsvc
+ && ( $new->dstsvc != $old->dstsvc
+ || ! $new->dstsvc && $new->dst ne $old->dst
+ )
+ ) {
+ return "Can't change both source and destination of a mail forward!"
+ }
+
+ local $SIG{HUP} = 'IGNORE';
+ local $SIG{INT} = 'IGNORE';
+ local $SIG{QUIT} = 'IGNORE';
+ local $SIG{TERM} = 'IGNORE';
+ local $SIG{TSTP} = 'IGNORE';
+ local $SIG{PIPE} = 'IGNORE';
+ my $oldAutoCommit = $FS::UID::AutoCommit;
+ local $FS::UID::AutoCommit = 0;
+ my $dbh = dbh;
+
+ my $error = $new->SUPER::replace($old);
+ if ($error) {
+ $dbh->rollback if $oldAutoCommit;
+ return $error;
+ }
+
+ my $old_svc_acct = $old->srcsvc_acct;
+ my $old_username = $old_svc_acct->username;
+ my $old_domain = $old_svc_acct->domain;
+ my $destination;
+ if ($old->dstsvc) {
+ $destination = $old->dstsvc_acct->email;
+ } else {
+ $destination = $old->dst;
+ }
+ foreach my $vpopmailmachine ( @vpopmailmachines ) {
+ my($machine, $vpopdir, $vpopuid, $vpopgid) =
+ split(/\s+/, $vpopmailmachine);
+ my $queue = new FS::queue {
+ 'svcnum' => $new->svcnum,
+ 'job' => 'Net::SSH::ssh_cmd',
+ };
+ # should be neater
+ my $error = $queue->insert("root\@$machine",
+ "sed -e '/^$destination/d' " .
+ "< $vpopdir/domains/$old_domain/$old_username/.qmail" .
+ "> $vpopdir/domains/$old_domain/$old_username/.qmail.temp; " .
+ "mv $vpopdir/domains/$old_domain/$old_username/.qmail.temp " .
+ "$vpopdir/domains/$old_domain/$old_username/.qmail; " .
+ "chown $vpopuid.$vpopgid " .
+ "$vpopdir/domains/$old_domain/$old_username/.qmail;"
+ )
+ unless $nossh_hack;
+
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "queueing job (transaction rolled back): $error";
+ }
+ }
+
+ #false laziness with stuff in insert, should subroutine
+ my $svc_acct = qsearchs( 'svc_acct', { 'svcnum' => $new->srcsvc } );
+ my $username = $svc_acct->username;
+ my $domain = $svc_acct->domain;
+ if ($new->dstsvc) {
+ $destination = $new->dstsvc_acct->email;
+ } else {
+ $destination = $new->dst;
+ }
+
+ foreach my $vpopmailmachine ( @vpopmailmachines ) {
+ my($machine, $vpopdir, $vpopuid, $vpopgid) = split(/\s+/, $vpopmailmachine);
+ my $queue = new FS::queue {
+ 'svcnum' => $new->svcnum,
+ 'job' => 'Net::SSH::ssh_cmd',
+ };
+ # should be neater
+ my $error = $queue->insert("root\@$machine","[ -d $vpopdir/domains/$domain/$username ] && { echo \"$destination\" >> $vpopdir/domains/$domain/$username/.qmail; chown $vpopuid:$vpopgid $vpopdir/domains/$domain/$username/.qmail; }")
+ unless $nossh_hack;
+ if ( $error ) {
+ $dbh->rollback if $oldAutoCommit;
+ return "queueing job (transaction rolled back): $error";
+ }
+ }
+ #end subroutinable bits
+
+ $dbh->commit or die $dbh->errstr if $oldAutoCommit;
+ '';
}
=item suspend
sub check {
my $self = shift;
- my $error;
my $x = $self->setfixed;
return $x unless ref($x);
- my $part_svc = $x;
+ #my $part_svc = $x;
- my($recref) = $self->hashref;
+ my $error = $self->ut_numbern('svcnum')
+ || $self->ut_number('srcsvc')
+ || $self->ut_numbern('dstsvc')
+ ;
+ return $error if $error;
- $recref->{srcsvc} =~ /^(\d+)$/ or return "Illegal srcsvc";
- $recref->{srcsvc} = $1;
- my($svc_acct);
- return "Unknown srcsvc" unless
- $svc_acct=qsearchs('svc_acct',{'svcnum'=> $recref->{srcsvc} } );
+ return "Unknown srcsvc" unless $self->srcsvc_acct;
- return "Illegal use of dstsvc and dst" if
- ($recref->{dstsvc} && $recref->{dst});
+ return "Both dstsvc and dst were defined; only one can be specified"
+ if $self->dstsvc && $self->dst;
- return "Illegal use of dstsvc and dst" if
- (! $recref->{dstsvc} && ! $recref->{dst});
+ return "one of dstsvc or dst is required"
+ unless $self->dstsvc || $self->dst;
- $recref->{dstsvc} =~ /^(\d+)$/ or return "Illegal dstsvc";
- $recref->{dstsvc} = $1;
+ #return "Unknown dstsvc: $dstsvc" unless $self->dstsvc_acct || ! $self->dstsvc;
+ return "Unknown dstsvc"
+ unless qsearchs('svc_acct', { 'svcnum' => $self->dstsvc } )
+ || ! $self->dstsvc;
- if ($recref->{dstsvc}) {
- my($svc_acct);
- return "Unknown dstsvc" unless
- my $svc_domain=qsearchs('svc_acct',{'svcnum'=> $recref->{dstsvc} } );
- }
- if ($recref->{dst}) {
- $recref->{dst} =~ /^([\w\.\-]+)\@(([\w\.\-]+\.)+\w+)$/
- or return "Illegal dst";
+ if ( $self->dst ) {
+ $self->dst =~ /^([\w\.\-]+)\@(([\w\-]+\.)+\w+)$/
+ or return "Illegal dst: ". $self->dst;
+ $self->dst("$1\@$2");
+ } else {
+ $self->dst('');
}
''; #no error
}
+=item srcsvc_acct
+
+Returns the FS::svc_acct object referenced by the srcsvc column.
+
+=cut
+
+sub srcsvc_acct {
+ my $self = shift;
+ qsearchs('svc_acct', { 'svcnum' => $self->srcsvc } );
+}
+
+=item dstsvc_acct
+
+Returns the FS::svc_acct object referenced by the srcsvc column, or false for
+forwards not local to freeside.
+
+=cut
+
+sub dstsvc_acct {
+ my $self = shift;
+ qsearchs('svc_acct', { 'svcnum' => $self->dstsvc } );
+}
+
=back
=head1 VERSION
-$Id: svc_forward.pm,v 1.3 2001-08-19 15:53:35 jeff Exp $
+$Id: svc_forward.pm,v 1.12 2002-05-31 17:50:37 ivan Exp $
=head1 BUGS
The remote commands should be configurable.
-The $recref stuff in sub check should be cleaned up.
-
=head1 SEE ALSO
L<FS::Record>, L<FS::Conf>, L<FS::cust_svc>, L<FS::part_svc>, L<FS::cust_pkg>,