1 # BEGIN BPS TAGGED BLOCK {{{
5 # This software is Copyright (c) 1996-2012 Best Practical Solutions, LLC
6 # <sales@bestpractical.com>
8 # (Except where explicitly superseded by other copyright notices)
13 # This work is made available to you under the terms of Version 2 of
14 # the GNU General Public License. A copy of that license should have
15 # been provided with this software, but in any event can be snarfed
18 # This work is distributed in the hope that it will be useful, but
19 # WITHOUT ANY WARRANTY; without even the implied warranty of
20 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 # General Public License for more details.
23 # You should have received a copy of the GNU General Public License
24 # along with this program; if not, write to the Free Software
25 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
26 # 02110-1301 or visit their web page on the internet at
27 # http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
30 # CONTRIBUTION SUBMISSION POLICY:
32 # (The following paragraph is not intended to limit the rights granted
33 # to you to modify and distribute this software under the terms of
34 # the GNU General Public License and is only of importance to you if
35 # you choose to contribute your changes and enhancements to the
36 # community by submitting them to Best Practical Solutions, LLC.)
38 # By intentionally submitting any modifications, corrections or
39 # derivatives to this work, or any other work intended for use with
40 # Request Tracker, to Best Practical Solutions, LLC, you confirm that
41 # you are the copyright holder for those contributions and you grant
42 # Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable,
43 # royalty-free, perpetual, license to use, copy, create derivative
44 # works based on those contributions, and sublicense and distribute
45 # those contributions and any derivatives thereof.
47 # END BPS TAGGED BLOCK }}}
49 # DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated.
50 # Have a look at "configure" and "Makefile.in" instead
58 RT_LAYOUT = @rt_layout_name@
60 CONFIG_FILE_PATH = @CONFIG_FILE_PATH_R@
61 CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm
62 SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm
65 RT_VERSION_MAJOR = @RT_VERSION_MAJOR@
66 RT_VERSION_MINOR = @RT_VERSION_MINOR@
67 RT_VERSION_PATCH = @RT_VERSION_PATCH@
69 RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH)
70 TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH)
73 # This is the group that all of the installed files will be chgrp'ed to.
77 # User which should own rt binaries.
78 BIN_OWNER = @BIN_OWNER@
80 # User that should own all of RT's libraries, generally root.
81 LIBS_OWNER = @LIBS_OWNER@
83 # Group that should own all of RT's libraries, generally root.
84 LIBS_GROUP = @LIBS_GROUP@
87 WEB_GROUP = @WEB_GROUP@
90 APACHECTL = @APACHECTL@
93 # DESTDIR allows you to specify that RT be installed somewhere other than
94 # where it will eventually reside. DESTDIR _must_ have a trailing slash
101 RT_PATH = @RT_PATH_R@
102 RT_ETC_PATH = @RT_ETC_PATH_R@
103 RT_BIN_PATH = @RT_BIN_PATH_R@
104 RT_SBIN_PATH = @RT_SBIN_PATH_R@
105 RT_LIB_PATH = @RT_LIB_PATH_R@
106 RT_MAN_PATH = @RT_MAN_PATH_R@
107 RT_VAR_PATH = @RT_VAR_PATH_R@
108 RT_DOC_PATH = @RT_DOC_PATH_R@
109 RT_FONT_PATH = @RT_FONT_PATH_R@
110 RT_LEXICON_PATH = @RT_LEXICON_PATH_R@
111 RT_LOCAL_PATH = @RT_LOCAL_PATH_R@
112 LOCAL_PLUGIN_PATH = @RT_LOCAL_PATH_R@/plugins
113 LOCAL_ETC_PATH = @LOCAL_ETC_PATH_R@
114 LOCAL_LIB_PATH = @LOCAL_LIB_PATH_R@
115 LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH_R@
116 MASON_HTML_PATH = @MASON_HTML_PATH_R@
117 MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH_R@
118 MASON_DATA_PATH = @MASON_DATA_PATH_R@
119 MASON_SESSION_PATH = @MASON_SESSION_PATH_R@
120 RT_LOG_PATH = @RT_LOG_PATH_R@
122 # RT_READABLE_DIR_MODE is the mode of directories that are generally meant
124 RT_READABLE_DIR_MODE = 0755
133 RT_MAILGATE_BIN = rt-mailgate
135 RT_CRON_BIN = rt-crontool
139 BINARIES = $(RT_MAILGATE_BIN) \
143 SYSTEM_BINARIES = rt-attributes-viewer \
146 rt-email-dashboards \
148 rt-email-group-admin \
149 rt-fulltext-indexer \
150 rt-preferences-viewer \
156 rt-setup-fulltext-index \
158 rt-test-dependencies \
174 WEB_HANDLER = @WEB_HANDLER@
179 # DB_TYPE defines what sort of database RT trys to talk to
180 # "mysql", "Oracle", "Pg", and "SQLite" are known to work.
184 # Set DBA to the name of a unix account with the proper permissions and
185 # environment to run your commandline SQL sbin
187 # Set DB_DBA to the name of a DB user with permission to create new databases
189 # For mysql, you probably want 'root'
190 # For Pg, you probably want 'postgres'
191 # For Oracle, you want 'system'
197 # If you're not running your database server on its default port,
198 # specifiy the port the database server is running on below.
199 # It's generally safe to leave this blank
207 # Set this to the canonical name of the interface RT will be talking to the
208 # database on. If you said that the RT_DB_HOST above was "localhost," this
209 # should be too. This value will be used to grant rt access to the database.
210 # If you want to access the RT database from multiple hosts, you'll need
211 # to grant those database rights by hand.
214 DB_RT_HOST = @DB_RT_HOST@
216 # set this to the name you want to give to the RT database in
217 # your database server. For Oracle, this should be the name of your sid
219 DB_DATABASE = @DB_DATABASE@
220 DB_RT_USER = @DB_RT_USER@
221 DB_RT_PASS = @DB_RT_PASS@
225 TEST_FILES = t/*.t t/*/*.t
229 ####################################################################
234 @echo "Please read RT's README before beginning your installation."
239 @echo "Congratulations. RT is now installed."
242 @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)."
244 @echo "(You will definitely need to set RT's database password in "
245 @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be "
246 @echo "very dangerous. Note that you do not have to manually add a "
247 @echo "database user or set up a database for RT. These actions will be "
248 @echo "taken care of in the next step.)"
250 @echo "After that, you need to initialize RT's database by running"
251 @echo " 'make initialize-database'"
255 @echo "Congratulations. RT has been upgraded. You should now check over"
256 @echo "$(CONFIG_FILE) for any necessary site customization. Additionally,"
257 @echo "you should update RT's system database objects by running "
258 @echo " make upgrade-database"
261 upgrade: testdeps config-install dirs files-install fixperms upgrade-instruct
263 my_with_web_handlers= $(shell $(PERL) -e 'print join " ", map "--with-$$_", grep defined && length, split /,/, "$(WEB_HANDLER)"')
265 $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) $(my_with_web_handlers)
270 $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) $(my_with_web_handlers)
275 # Make the libraries readable
276 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_PATH)
277 chown -R $(LIBS_OWNER) $(DESTDIR)$(RT_LIB_PATH)
278 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(RT_LIB_PATH)
279 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(RT_LIB_PATH)
282 chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)$(RT_BIN_PATH)
284 chmod 0755 $(DESTDIR)$(RT_ETC_PATH)
285 cd $(DESTDIR)$(RT_ETC_PATH) && chmod 0400 $(ETC_FILES) || true
287 #TODO: the config file should probably be able to have its
288 # owner set separately from the binaries.
289 chown -R $(BIN_OWNER) $(DESTDIR)$(RT_ETC_PATH)
290 chgrp -R $(RTGROUP) $(DESTDIR)$(RT_ETC_PATH)
292 chmod 0440 $(DESTDIR)$(CONFIG_FILE)
293 chmod 0640 $(DESTDIR)$(SITE_CONFIG_FILE)
294 # Make this externally readable
295 chmod 0440 $(DESTDIR)$(RT_ETC_PATH)/initialdata
297 # Make the system binaries
298 cd $(DESTDIR)$(RT_BIN_PATH) && ( chmod 0755 $(BINARIES) ; chown $(BIN_OWNER) $(BINARIES); chgrp $(RTGROUP) $(BINARIES))
300 # Make the system binaries executable also
301 cd $(DESTDIR)$(RT_SBIN_PATH) && ( chmod 0755 $(SYSTEM_BINARIES) ; chown $(BIN_OWNER) $(SYSTEM_BINARIES); chgrp $(RTGROUP) $(SYSTEM_BINARIES))
304 # Make the web ui readable by all.
305 chmod -R u+rwX,go-w,go+rX $(DESTDIR)$(MASON_HTML_PATH) \
306 $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
307 $(DESTDIR)$(RT_LEXICON_PATH) \
308 $(DESTDIR)$(LOCAL_LEXICON_PATH)
309 chown -R $(LIBS_OWNER) $(DESTDIR)$(MASON_HTML_PATH) \
310 $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
311 $(DESTDIR)$(RT_LEXICON_PATH) \
312 $(DESTDIR)$(LOCAL_LEXICON_PATH)
313 chgrp -R $(LIBS_GROUP) $(DESTDIR)$(MASON_HTML_PATH) \
314 $(DESTDIR)$(MASON_LOCAL_HTML_PATH) \
315 $(DESTDIR)$(RT_LEXICON_PATH) \
316 $(DESTDIR)$(LOCAL_LEXICON_PATH)
318 # Make the web ui's data dir writable
319 chmod 0770 $(DESTDIR)$(MASON_DATA_PATH) \
320 $(DESTDIR)$(MASON_SESSION_PATH)
321 chown -R $(WEB_USER) $(DESTDIR)$(MASON_DATA_PATH) \
322 $(DESTDIR)$(MASON_SESSION_PATH)
323 chgrp -R $(WEB_GROUP) $(DESTDIR)$(MASON_DATA_PATH) \
324 $(DESTDIR)$(MASON_SESSION_PATH)
327 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LOG_PATH)
328 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
329 $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
330 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)
331 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/cache
332 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/etc
333 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_DATA_PATH)/obj
334 $(INSTALL) -m 0770 -d $(DESTDIR)$(MASON_SESSION_PATH)
335 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
336 $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_LOCAL_HTML_PATH)
337 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_ETC_PATH)
338 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LIB_PATH)
339 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_PLUGIN_PATH)
340 $(INSTALL) -m 0755 -d $(DESTDIR)$(LOCAL_LEXICON_PATH)
342 install: testdeps config-install dirs files-install fixperms instruct
344 files-install: libs-install etc-install config-install bin-install sbin-install html-install local-install doc-install font-install po-install
347 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -o $(BIN_OWNER) -g $(RTGROUP) -d $(DESTDIR)$(CONFIG_FILE_PATH)
348 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0440 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_Config.pm $(DESTDIR)$(CONFIG_FILE)
349 @COMMENT_INPLACE_LAYOUT@ [ -f $(DESTDIR)$(SITE_CONFIG_FILE) ] || $(INSTALL) -m 0640 -o $(BIN_OWNER) -g $(RTGROUP) etc/RT_SiteConfig.pm $(DESTDIR)$(SITE_CONFIG_FILE)
350 @COMMENT_INPLACE_LAYOUT@ @echo "Installed configuration. About to install RT in $(RT_PATH)"
353 $(PERL) "-MExtUtils::Command::MM" -e "test_harness($(TEST_VERBOSE), 'lib')" $(TEST_FILES)
355 parallel-test: test-parallel
358 RT_TEST_PARALLEL=1 $(PERL) "-MApp::Prove" -e 'my $$p = App::Prove->new(); $$p->process_args("-wlrj5","--state=slow,save", "t"); exit( $$p->run() ? 0 : 1 )'
360 regression-reset-db: force-dropdb
361 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --dba-password ''
363 initdb :: initialize-database
366 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action init --prompt-for-dba-password
369 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action upgrade --prompt-for-dba-password
372 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --prompt-for-dba-password
375 $(PERL) -I$(LOCAL_LIB_PATH) -I$(RT_LIB_PATH) sbin/rt-setup-database --action drop --dba-password '' --force
378 perlcritic --quiet sbin bin lib
381 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LIB_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LIB_PATH)
382 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type d -print ) | while read dir ; do \
383 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_LIB_PATH)/$$dir" ; \
384 @COMMENT_INPLACE_LAYOUT@ done
385 @COMMENT_INPLACE_LAYOUT@ -( cd lib && find . -type f -print ) | while read file ; do \
386 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "lib/$$file" "$(DESTDIR)$(RT_LIB_PATH)/$$file" ; \
387 @COMMENT_INPLACE_LAYOUT@ done
390 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(MASON_HTML_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(MASON_HTML_PATH)
391 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type d -print ) | while read dir ; do \
392 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_HTML_PATH)/$$dir" ; \
393 @COMMENT_INPLACE_LAYOUT@ done
394 @COMMENT_INPLACE_LAYOUT@ -( cd share/html && find . -type f -print ) | while read file ; do \
395 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/html/$$file" "$(DESTDIR)$(MASON_HTML_PATH)/$$file" ; \
396 @COMMENT_INPLACE_LAYOUT@ done
399 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_FONT_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_FONT_PATH)
400 @COMMENT_INPLACE_LAYOUT@ -( cd share/fonts && find . -type f -print ) | while read file ; do \
401 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/fonts/$$file" "$(DESTDIR)$(RT_FONT_PATH)/$$file" ; \
402 @COMMENT_INPLACE_LAYOUT@ done
406 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_LEXICON_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_LEXICON_PATH)
407 @COMMENT_INPLACE_LAYOUT@ -( cd share/po && find . -type f -print ) | while read file ; do \
408 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "share/po/$$file" "$(DESTDIR)$(RT_LEXICON_PATH)/$$file" ; \
409 @COMMENT_INPLACE_LAYOUT@ done
414 @COMMENT_INPLACE_LAYOUT@ # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir
415 @COMMENT_INPLACE_LAYOUT@ -[ -f $(DESTDIR)$(RT_DOC_PATH) ] && rm $(DESTDIR)$(RT_DOC_PATH)
416 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_DOC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_DOC_PATH)
417 @COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type d -print ) | while read dir ; do \
418 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d "$(DESTDIR)$(RT_DOC_PATH)/$$dir" ; \
419 @COMMENT_INPLACE_LAYOUT@ done
420 @COMMENT_INPLACE_LAYOUT@ -( cd docs && find . -type f -print ) | while read file ; do \
421 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "docs/$$file" "$(DESTDIR)$(RT_DOC_PATH)/$$file" ; \
422 @COMMENT_INPLACE_LAYOUT@ done
423 @COMMENT_INPLACE_LAYOUT@ -$(INSTALL) -m 0644 ./README $(DESTDIR)$(RT_DOC_PATH)/
427 @COMMENT_INPLACE_LAYOUT@ [ -d $(DESTDIR)$(RT_ETC_PATH) ] || $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_ETC_PATH)
428 @COMMENT_INPLACE_LAYOUT@ for file in $(ETC_FILES) ; do \
429 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(RT_ETC_PATH)/" ; \
430 @COMMENT_INPLACE_LAYOUT@ done
434 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_SBIN_PATH)
435 @COMMENT_INPLACE_LAYOUT@ for file in $(SYSTEM_BINARIES) ; do \
436 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "sbin/$$file" "$(DESTDIR)$(RT_SBIN_PATH)/" ; \
437 @COMMENT_INPLACE_LAYOUT@ done
442 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -m 0755 -d $(DESTDIR)$(RT_BIN_PATH)
443 @COMMENT_INPLACE_LAYOUT@ for file in $(BINARIES) ; do \
444 @COMMENT_INPLACE_LAYOUT@ $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "bin/$$file" "$(DESTDIR)$(RT_BIN_PATH)/" ; \
445 @COMMENT_INPLACE_LAYOUT@ done
448 -( cd local/html && find . -type d -print ) | while read dir ; do \
449 $(INSTALL) -m 0755 -d "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$dir" ; \
451 -( cd local/html && find . -type f -print ) | while read file ; do \
452 $(INSTALL) -m 0644 "local/html/$$file" "$(DESTDIR)$(MASON_LOCAL_HTML_PATH)/$$file" ; \
454 -( cd local/po && find . -type d -print ) | while read dir ; do \
455 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$dir" ; \
457 -( cd local/po && find . -type f -print ) | while read file ; do \
458 $(INSTALL) -m 0644 "local/po/$$file" "$(DESTDIR)$(LOCAL_LEXICON_PATH)/$$file" ; \
460 -( cd local/etc && find . -type d -print ) | while read dir ; do \
461 $(INSTALL) -m 0755 -d "$(DESTDIR)$(LOCAL_ETC_PATH)/$$dir" ; \
463 -( cd local/etc && find . -type f -print ) | while read file ; do \
464 $(INSTALL) -m 0644 "etc/$$file" "$(DESTDIR)$(LOCAL_ETC_PATH)/$$file" ; \
469 $(PERL) devel/tools/extract-message-catalog
472 $(PERL) devel/tools/license_tag
474 factory: initialize-database
475 cd lib; $(PERL) ../devel/tools/factory $(DB_DATABASE) RT
478 $(PERL) sbin/standalone_httpd &
481 $(PERL) sbin/rt-server &
489 SNAPSHOT=$(shell git describe --tags)
490 THIRD_PARTY=devel/third-party/
491 snapshot: build-snapshot build-third-party clearsign-snapshot clearsign-third-party snapshot-shasums
494 git archive --prefix "$(SNAPSHOT)/" HEAD | tar -xf -
495 ( cd $(SNAPSHOT) && \
496 echo "$(SNAPSHOT)" > .tag && \
498 INSTALL=./install-sh PERL=/usr/bin/perl ./configure \
499 --with-db-type=SQLite \
500 --enable-layout=relative \
501 --with-web-handler=standalone && \
502 rm -rf autom4te.cache \
503 config.status config.log config.pld \
505 tar -czf "$(SNAPSHOT).tar.gz" "$(SNAPSHOT)/"
506 rm -fr "$(SNAPSHOT)/"
509 gpg --no-armor --detach-sign "$(SNAPSHOT).tar.gz"
512 git archive --prefix "$(SNAPSHOT)/$(THIRD_PARTY)" HEAD:$(THIRD_PARTY) \
513 | gzip > "$(SNAPSHOT)-third-party-source.tar.gz"
514 rm -rf "$(SNAPSHOT)/$(THIRD_PARTY)"
516 clearsign-third-party:
517 gpg --no-armor --detach-sign "$(SNAPSHOT)-third-party-source.tar.gz"
520 sha1sum $(SNAPSHOT)*.tar.gz*
522 vessel-import: build-snapshot
523 [ -d $(VESSEL) ] || (echo "VESSEL isn't a path to your shipwright vessel" && exit -1)
524 cp $(VESSEL)/scripts/RT/build.pl /tmp/build.pl
525 ./sbin/rt-test-dependencies --with-standalone --with-fastcgi --with-sqlite --list > /tmp/rt.yml
526 shipwright import file:$(SNAPSHOT).tar.gz \
527 --require-yml /tmp/rt.yml \
528 --build-script /tmp/build.pl \
530 --repository fs:$(VESSEL) \
532 --skip cpan-capitalization,cpan-mod_perl,cpan-Encode,cpan-PPI,cpan-Test-Exception-LessClever,cpan-Test-Manifest,cpan-Test-Object,cpan-Test-Pod,cpan-Test-Requires,cpan-Test-SubCalls,cpan-Test-cpan-Tester,cpan-Test-Warn --skip-all-recommends
533 mv $(VESSEL)/scripts/RT/build $(VESSEL)/scripts/RT/build.pl
535 JSMIN_URL = http://download.bestpractical.com/mirror/jsmin-2011-01-22.c
536 JSMIN_SHA = 8a6b3b980a52c028eb73aee4a82ebe060c1ee854
538 jsmin: jsmin-checkcc jsmin-fetch jsmin-verify jsmin-confirm jsmin-build jsmin-install
540 @echo "To configure RT to use jsmin, add the following line to $(DESTDIR)$(RT_ETC_PATH)/RT_SiteConfig.pm:"
542 @echo " Set(\$$JSMinPath, '$(DESTDIR)$(RT_BIN_PATH)/jsmin');"
546 @[ -n "$(CC)" ] || (echo "You don't appear to have a C compiler, please set CC and re-run configure" && exit 1)
549 @echo "jsmin is distributed under a slightly unusual license and can't be shipped"
550 @echo "with RT. Before configuring RT to use jsmin, please read jsmin's license"
553 @$(PERL) -pe 'print && exit if /^\*\// or /^#include/' jsmin.c
555 @echo "Press Enter to accept the license, or Ctrl-C to stop now."
556 @$(PERL) -e '<STDIN>'
560 @echo "Downloading jsmin.c from $(JSMIN_URL)"
562 @$(PERL) -MLWP::Simple -e 'exit not is_success(getstore("$(JSMIN_URL)", "jsmin.c"))' \
563 || (echo "Failed to download $(JSMIN_URL)" && exit 1)
566 @$(PERL) -MDigest::SHA -e \
567 'exit not Digest::SHA->new(1)->addfile("jsmin.c")->hexdigest eq "$(JSMIN_SHA)"' \
568 || (echo "Verification of jsmin.c failed! Possible man in the middle?" && exit 1)
571 $(CC) -o jsmin jsmin.c
574 $(INSTALL) -o $(BIN_OWNER) -g $(RTGROUP) -m 0755 "jsmin" "$(DESTDIR)$(RT_BIN_PATH)/"