diff options
Diffstat (limited to 'rt/lib/RT/Interface/Email.pm')
| -rwxr-xr-x | rt/lib/RT/Interface/Email.pm | 294 |
1 files changed, 203 insertions, 91 deletions
diff --git a/rt/lib/RT/Interface/Email.pm b/rt/lib/RT/Interface/Email.pm index bc1a55da2..241f5f35c 100755 --- a/rt/lib/RT/Interface/Email.pm +++ b/rt/lib/RT/Interface/Email.pm @@ -27,14 +27,14 @@ use strict; use Mail::Address; use MIME::Entity; use RT::EmailParser; - +use File::Temp; BEGIN { use Exporter (); use vars qw ($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS); # set the version for version checking - $VERSION = do { my @r = (q$Revision: 1.1.1.1 $ =~ /\d+/g); sprintf "%d."."%02d" x $#r, @r }; # must be all one line, for MakeMaker + $VERSION = do { my @r = (q$Revision: 1.1.1.2 $ =~ /\d+/g); sprintf "%d."."%02d" x $#r, @r }; # must be all one line, for MakeMaker @ISA = qw(Exporter); @@ -153,6 +153,7 @@ sub MailError { Subject => 'There has been an error', Explanation => 'Unexplained error', MIMEObj => undef, + Attach => undef, LogLevel => 'crit', @_); @@ -175,7 +176,13 @@ sub MailError { $mimeobj->sync_headers(); $entity->add_part($mimeobj); } - + + if ($args{'Attach'}) { + $entity->attach(Data => $args{'Attach'}, Type => 'message/rfc822'); + + } + + if ($RT::MailCommand eq 'sendmailpipe') { open (MAIL, "|$RT::SendmailPath $RT::SendmailArguments") || return(0); print MAIL $entity->as_string; @@ -194,12 +201,6 @@ sub CreateUser { my ($Username, $Address, $Name, $ErrorsTo, $entity) = @_; my $NewUser = RT::User->new($RT::SystemUser); - # This data is tainted by some Very Broken mailers. - # (Sometimes they send raw ISO 8859-1 data here. fear that. - require Encode; - $Username = Encode::encode(utf8 => $Username, Encode::FB_PERLQQ()) if defined $Username; - $Name = Encode::encode(utf8 => $Name, Encode::FB_PERLQQ()) if defined $Name; - my ($Val, $Message) = $NewUser->Create(Name => ($Username || $Address), EmailAddress => $Address, @@ -361,36 +362,108 @@ sub ParseAddressFromHeader{ -=head2 Gateway +=head2 Gateway ARGSREF + + +Takes parameters: + + action + queue + message + This performs all the "guts" of the mail rt-mailgate program, and is designed to be called from the web interface with a message, user object, and so on. +Returns: + + An array of: + + (status code, message, optional ticket object) + + status code is a numeric value. + + for temporary failures, status code should be -75 + + for permanent failures which are handled by RT, status code should be 0 + + for succces, the status code should be 1 + + + =cut sub Gateway { - my %args = ( message => undef, - queue => 1, - action => 'correspond', - ticket => undef, - @_ ); + my $argsref = shift; + + my %args = %$argsref; + + # Set some reasonable defaults + $args{'action'} = 'correspond' unless ( $args{'action'} ); + $args{'queue'} = '1' unless ( $args{'queue'} ); # Validate the action unless ( $args{'action'} =~ /^(comment|correspond|action)$/ ) { # Can't safely loc this. What object do we loc around? - return ( 0, "Invalid 'action' parameter", undef ); + $RT::Logger->crit("Mail gateway called with an invalid action paramenter '".$args{'action'}."' for queue '".$args{'queue'}."'"); + + return ( -75, "Invalid 'action' parameter", undef ); } my $parser = RT::EmailParser->new(); - $parser->ParseMIMEEntityFromScalar( $args{'message'} ); + my ( $fh, $temp_file ); + for ( 1 .. 10 ) { + + # on NFS and NTFS, it is possible that tempfile() conflicts + # with other processes, causing a race condition. we try to + # accommodate this by pausing and retrying. + last if ( $fh, $temp_file ) = eval { File::Temp::tempfile(undef, UNLINK => 0) }; + sleep 1; + } + if ($fh) { + binmode $fh; #thank you, windows + $fh->autoflush(1); + print $fh $args{'message'}; + close($fh); + + if ( -f $temp_file ) { + $parser->ParseMIMEEntityFromFile($temp_file); + File::Temp::unlink0( $fh, $temp_file ); + if ($parser->Entity) { + delete $args{'message'}; + } + } + + } + + #If for some reason we weren't able to parse the message using a temp file + # try it with a scalar + if ($args{'message'}) { + $parser->ParseMIMEEntityFromScalar($args{'message'}); + + } + + if (!$parser->Entity()) { + MailError( + To => $RT::OwnerEmail, + Subject => "RT Bounce: Unparseable message", + Explanation => "RT couldn't process the message below", + Attach => $args{'message'} + ); + + return(0,"Failed to parse this message. Something is likely badly wrong with the message"); + } my $Message = $parser->Entity(); - my $head = $Message->head; + my $head = $Message->head; my ( $CurrentUser, $AuthStat, $status, $error ); + # Initalize AuthStat so comparisons work correctly + $AuthStat = -9999999; + my $ErrorsTo = ParseErrorsToAddressFromHead($head); my $MessageId = $head->get('Message-Id') @@ -400,37 +473,31 @@ sub Gateway { my $Subject = $head->get('Subject') || ''; chomp $Subject; - $args{'ticket'} ||= $parser->ParseTicketId($Subject); my $SystemTicket; - if ($args{'ticket'} ) { + if ( $args{'ticket'} ) { $SystemTicket = RT::Ticket->new($RT::SystemUser); - $SystemTicket->Load($args{'ticket'}); + $SystemTicket->Load( $args{'ticket'} ); } #Set up a queue object my $SystemQueueObj = RT::Queue->new($RT::SystemUser); $SystemQueueObj->Load( $args{'queue'} ); - # We can safely have no queue of we have a known-good ticket unless ( $args{'ticket'} || $SystemQueueObj->id ) { - MailError( - To => $RT::OwnerEmail, - Subject => "RT Bounce: $Subject", - Explanation => "RT couldn't find the queue: " . $args{'queue'}, - MIMEObj => $Message ); - return ( 0, "RT couldn't find the queue: " . $args{'queue'}, undef ); + return ( -75, "RT couldn't find the queue: " . $args{'queue'}, undef ); } # Authentication Level - # -1 - Get out. this user has been explicitly declined + # -1 - Get out. this user has been explicitly declined # 0 - User may not do anything (Not used at the moment) # 1 - Normal user # 2 - User is allowed to specify status updates etc. a la enhanced-mailgate - push @RT::MailPlugins, "Auth::MailFrom" unless @RT::MailPlugins; + push @RT::MailPlugins, "Auth::MailFrom" unless @RT::MailPlugins; + # Since this needs loading, no matter what for (@RT::MailPlugins) { @@ -453,35 +520,59 @@ sub Gateway { } } - ( $CurrentUser, $NewAuthStat ) = $Code->( Message => $Message, - CurrentUser => $CurrentUser, - AuthLevel => $AuthStat, - Action => $args{'action'}, - Ticket => $SystemTicket, - Queue => $SystemQueueObj ); + ( $CurrentUser, $NewAuthStat ) = $Code->( + Message => $Message, + CurrentUser => $CurrentUser, + AuthLevel => $AuthStat, + Action => $args{'action'}, + Ticket => $SystemTicket, + Queue => $SystemQueueObj + ); + + # If a module returns a "-1" then we discard the ticket, so. + $AuthStat = -1 if $NewAuthStat == -1; # You get the highest level of authentication you were assigned. - last if $AuthStat == -1; $AuthStat = $NewAuthStat if $NewAuthStat > $AuthStat; + last if $AuthStat == -1; } # {{{ If authentication fails and no new user was created, get out. if ( !$CurrentUser or !$CurrentUser->Id or $AuthStat == -1 ) { # If the plugins refused to create one, they lose. - MailError( - Subject => "Could not load a valid user", - Explanation => <<EOT, + unless ( $AuthStat == -1 ) { + + # Notify the RT Admin of the failure. + # XXX Should this be configurable? + MailError( + To => $RT::OwnerEmail, + Subject => "Could not load a valid user", + Explanation => <<EOT, RT could not load a valid user, and RT's configuration does not allow -for the creation of a new user for your email. +for the creation of a new user for this email ($ErrorsTo). -Your RT administrator needs to grant 'Everyone' the right 'CreateTicket' -for this queue. +You might need to grant 'Everyone' the right 'CreateTicket' for the +queue @{[$args{'queue'}]}. EOT - MIMEObj => $Message, - LogLevel => 'error' ) - unless $AuthStat == -1; + MIMEObj => $Message, + LogLevel => 'error' + ); + + # Also notify the requestor that his request has been dropped. + MailError( + To => $ErrorsTo, + Subject => "Could not load a valid user", + Explanation => <<EOT, +RT could not load a valid user, and RT's configuration does not allow +for the creation of a new user for your email. + +EOT + MIMEObj => $Message, + LogLevel => 'error' + ); + } return ( 0, "Could not load a valid user", undef ); } @@ -508,10 +599,11 @@ EOT # {{{ Drop it if it's disallowed if ( $AuthStat == 0 ) { MailError( - To => $ErrorsTo, - Subject => "Permission Denied", - Explanation => "You do not have permission to communicate with RT", - MIMEObj => $Message ); + To => $ErrorsTo, + Subject => "Permission Denied", + Explanation => "You do not have permission to communicate with RT", + MIMEObj => $Message + ); } # }}} @@ -523,10 +615,12 @@ EOT #Should we mail it to RTOwner? if ($RT::LoopsToRTOwner) { - MailError( To => $RT::OwnerEmail, - Subject => "RT Bounce: $Subject", - Explanation => "RT thinks this message may be a bounce", - MIMEObj => $Message ); + MailError( + To => $RT::OwnerEmail, + Subject => "RT Bounce: $Subject", + Explanation => "RT thinks this message may be a bounce", + MIMEObj => $Message + ); #Do we actually want to store it? return ( 0, "Message Bounced", undef ) unless ($RT::StoreLoops); @@ -538,8 +632,10 @@ EOT # {{{ Squelch replies if necessary # Don't let the user stuff the RT-Squelch-Replies-To header. if ( $head->get('RT-Squelch-Replies-To') ) { - $head->add( 'RT-Relocated-Squelch-Replies-To', - $head->get('RT-Squelch-Replies-To') ); + $head->add( + 'RT-Relocated-Squelch-Replies-To', + $head->get('RT-Squelch-Replies-To') + ); $head->delete('RT-Squelch-Replies-To'); } @@ -564,22 +660,27 @@ EOT my @Requestors = ( $CurrentUser->id ); if ($RT::ParseNewMessageForTicketCcs) { - @Cc = ParseCcAddressesFromHead( Head => $head, - CurrentUser => $CurrentUser, - QueueObj => $SystemQueueObj ); + @Cc = ParseCcAddressesFromHead( + Head => $head, + CurrentUser => $CurrentUser, + QueueObj => $SystemQueueObj + ); } my ( $id, $Transaction, $ErrStr ) = $Ticket->Create( - Queue => $SystemQueueObj->Id, - Subject => $Subject, - Requestor => \@Requestors, - Cc => \@Cc, - MIMEObj => $Message ); + Queue => $SystemQueueObj->Id, + Subject => $Subject, + Requestor => \@Requestors, + Cc => \@Cc, + MIMEObj => $Message + ); if ( $id == 0 ) { - MailError( To => $ErrorsTo, - Subject => "Ticket creation failed", - Explanation => $ErrStr, - MIMEObj => $Message ); + MailError( + To => $ErrorsTo, + Subject => "Ticket creation failed", + Explanation => $ErrStr, + MIMEObj => $Message + ); $RT::Logger->error("Create failed: $id / $Transaction / $ErrStr "); return ( 0, "Ticket creation failed", $Ticket ); } @@ -591,15 +692,17 @@ EOT # If the action is comment, add a comment. elsif ( $args{'action'} =~ /^(comment|correspond)$/i ) { - $Ticket->Load($args{'ticket'}); + $Ticket->Load( $args{'ticket'} ); unless ( $Ticket->Id ) { - my $message = "Could not find a ticket with id ".$args{'ticket'}; - MailError( To => $ErrorsTo, - Subject => "Message not recorded", - Explanation => $message, - MIMEObj => $Message ); - - return ( 0, $message); + my $message = "Could not find a ticket with id " . $args{'ticket'}; + MailError( + To => $ErrorsTo, + Subject => "Message not recorded", + Explanation => $message, + MIMEObj => $Message + ); + + return ( 0, $message ); } my ( $status, $msg ); @@ -612,10 +715,12 @@ EOT unless ($status) { #Warn the sender that we couldn't actually submit the comment. - MailError( To => $ErrorsTo, - Subject => "Message not recorded", - Explanation => $msg, - MIMEObj => $Message ); + MailError( + To => $ErrorsTo, + Subject => "Message not recorded", + Explanation => $msg, + MIMEObj => $Message + ); return ( 0, "Message not recorded", $Ticket ); } } @@ -623,21 +728,28 @@ EOT else { #Return mail to the sender with an error - MailError( To => $ErrorsTo, - Subject => "RT Configuration error", - Explanation => "'" - . $args{'action'} - . "' not a recognized action." - . " Your RT administrator has misconfigured " - . "the mail aliases which invoke RT", - MIMEObj => $Message ); + MailError( + To => $ErrorsTo, + Subject => "RT Configuration error", + Explanation => "'" + . $args{'action'} + . "' not a recognized action." + . " Your RT administrator has misconfigured " + . "the mail aliases which invoke RT", + MIMEObj => $Message + ); $RT::Logger->crit( $args{'action'} . " type unknown for $MessageId" ); - return ( 0, "Configuration error: " . $args{'action'} . " not a recognized action", $Ticket ); + return ( + -75, + "Configuration error: " + . $args{'action'} + . " not a recognized action", + $Ticket + ); } - -return ( 1, "Success", $Ticket ); + return ( 1, "Success", $Ticket ); } eval "require RT::Interface::Email_Vendor"; |