diff options
Diffstat (limited to 'rt/Makefile.in')
-rw-r--r-- | rt/Makefile.in | 492 |
1 files changed, 0 insertions, 492 deletions
diff --git a/rt/Makefile.in b/rt/Makefile.in deleted file mode 100644 index 43dcee18c..000000000 --- a/rt/Makefile.in +++ /dev/null @@ -1,492 +0,0 @@ -# BEGIN BPS TAGGED BLOCK {{{ -# -# COPYRIGHT: -# -# This software is Copyright (c) 1996-2005 Best Practical Solutions, LLC -# <jesse@bestpractical.com> -# -# (Except where explicitly superseded by other copyright notices) -# -# -# LICENSE: -# -# This work is made available to you under the terms of Version 2 of -# the GNU General Public License. A copy of that license should have -# been provided with this software, but in any event can be snarfed -# from www.gnu.org. -# -# This work is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -# -# -# CONTRIBUTION SUBMISSION POLICY: -# -# (The following paragraph is not intended to limit the rights granted -# to you to modify and distribute this software under the terms of -# the GNU General Public License and is only of importance to you if -# you choose to contribute your changes and enhancements to the -# community by submitting them to Best Practical Solutions, LLC.) -# -# By intentionally submitting any modifications, corrections or -# derivatives to this work, or any other work intended for use with -# Request Tracker, to Best Practical Solutions, LLC, you confirm that -# you are the copyright holder for those contributions and you grant -# Best Practical Solutions, LLC a nonexclusive, worldwide, irrevocable, -# royalty-free, perpetual, license to use, copy, create derivative -# works based on those contributions, and sublicense and distribute -# those contributions and any derivatives thereof. -# -# END BPS TAGGED BLOCK }}} -# -# DO NOT HAND-EDIT the file named 'Makefile'. This file is autogenerated. -# Have a look at "configure" and "Makefile.in" instead -# - - -PERL = @PERL@ - -CONFIG_FILE_PATH = @CONFIG_FILE_PATH@ -CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_Config.pm -SITE_CONFIG_FILE = $(CONFIG_FILE_PATH)/RT_SiteConfig.pm - - -RT_VERSION_MAJOR = @RT_VERSION_MAJOR@ -RT_VERSION_MINOR = @RT_VERSION_MINOR@ -RT_VERSION_PATCH = @RT_VERSION_PATCH@ - -RT_VERSION = $(RT_VERSION_MAJOR).$(RT_VERSION_MINOR).$(RT_VERSION_PATCH) -TAG = rt-$(RT_VERSION_MAJOR)-$(RT_VERSION_MINOR)-$(RT_VERSION_PATCH) - - -# This is the group that all of the installed files will be chgrp'ed to. -RTGROUP = @RTGROUP@ - - -# User which should own rt binaries. -BIN_OWNER = @BIN_OWNER@ - -# User that should own all of RT's libraries, generally root. -LIBS_OWNER = @LIBS_OWNER@ - -# Group that should own all of RT's libraries, generally root. -LIBS_GROUP = @LIBS_GROUP@ - -WEB_USER = @WEB_USER@ -WEB_GROUP = @WEB_GROUP@ - - -APACHECTL = @APACHECTL@ - -# {{{ Files and directories - -# DESTDIR allows you to specify that RT be installed somewhere other than -# where it will eventually reside - -DESTDIR = - - -RT_PATH = @RT_PATH@ -RT_ETC_PATH = @RT_ETC_PATH@ -RT_BIN_PATH = @RT_BIN_PATH@ -RT_SBIN_PATH = @RT_SBIN_PATH@ -RT_LIB_PATH = @RT_LIB_PATH@ -RT_MAN_PATH = @RT_MAN_PATH@ -RT_VAR_PATH = @RT_VAR_PATH@ -RT_DOC_PATH = @RT_DOC_PATH@ -RT_LOCAL_PATH = @RT_LOCAL_PATH@ -LOCAL_ETC_PATH = @LOCAL_ETC_PATH@ -LOCAL_LIB_PATH = @LOCAL_LIB_PATH@ -LOCAL_LEXICON_PATH = @LOCAL_LEXICON_PATH@ -MASON_HTML_PATH = @MASON_HTML_PATH@ -MASON_LOCAL_HTML_PATH = @MASON_LOCAL_HTML_PATH@ -MASON_DATA_PATH = @MASON_DATA_PATH@ -MASON_SESSION_PATH = @MASON_SESSION_PATH@ -RT_LOG_PATH = @RT_LOG_PATH@ - -# RT_READABLE_DIR_MODE is the mode of directories that are generally meant -# to be accessable -RT_READABLE_DIR_MODE = 0755 - - - - -# {{{ all these define the places that RT's binaries should get installed - -# RT_MODPERL_HANDLER is the mason handler script for mod_perl -RT_MODPERL_HANDLER = $(RT_BIN_PATH)/webmux.pl -# RT_STANDALONE_SERVER is a stand-alone HTTP server -RT_STANDALONE_SERVER = $(RT_BIN_PATH)/standalone_httpd -# RT_SPEEDYCGI_HANDLER is the mason handler script for SpeedyCGI -RT_SPEEDYCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.scgi -# RT_FASTCGI_HANDLER is the mason handler script for FastCGI -RT_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.fcgi -# RT_WIN32_FASTCGI_HANDLER is the mason handler script for FastCGI -RT_WIN32_FASTCGI_HANDLER = $(RT_BIN_PATH)/mason_handler.svc -# RT's CLI -RT_CLI_BIN = $(RT_BIN_PATH)/rt -# RT's mail gateway -RT_MAILGATE_BIN = $(RT_BIN_PATH)/rt-mailgate -# RT's cron tool -RT_CRON_BIN = $(RT_BIN_PATH)/rt-crontool - -# }}} - - -BINARIES = $(DESTDIR)/$(RT_MODPERL_HANDLER) \ - $(DESTDIR)/$(RT_MAILGATE_BIN) \ - $(DESTDIR)/$(RT_CLI_BIN) \ - $(DESTDIR)/$(RT_CRON_BIN) \ - $(DESTDIR)/$(RT_STANDALONE_SERVER) \ - $(DESTDIR)/$(RT_SPEEDYCGI_HANDLER) \ - $(DESTDIR)/$(RT_FASTCGI_HANDLER) \ - $(DESTDIR)/$(RT_WIN32_FASTCGI_HANDLER) -SYSTEM_BINARIES = $(DESTDIR)/$(RT_SBIN_PATH)/ - -# }}} - -# {{{ Database setup - -# -# DB_TYPE defines what sort of database RT trys to talk to -# "mysql" is known to work. -# "Pg" is known to work -# "Informix" is known to work - -DB_TYPE = @DB_TYPE@ - -# Set DBA to the name of a unix account with the proper permissions and -# environment to run your commandline SQL sbin - -# Set DB_DBA to the name of a DB user with permission to create new databases - -# For mysql, you probably want 'root' -# For Pg, you probably want 'postgres' -# For Oracle, you want 'system' -# For Informix, you want 'informix' - -DB_DBA = @DB_DBA@ - -DB_HOST = @DB_HOST@ - -# If you're not running your database server on its default port, -# specifiy the port the database server is running on below. -# It's generally safe to leave this blank - -DB_PORT = @DB_PORT@ - - - - -# -# Set this to the canonical name of the interface RT will be talking to the -# database on. If you said that the RT_DB_HOST above was "localhost," this -# should be too. This value will be used to grant rt access to the database. -# If you want to access the RT database from multiple hosts, you'll need -# to grant those database rights by hand. -# - -DB_RT_HOST = @DB_RT_HOST@ - -# set this to the name you want to give to the RT database in -# your database server. For Oracle, this should be the name of your sid - -DB_DATABASE = @DB_DATABASE@ -DB_RT_USER = @DB_RT_USER@ -DB_RT_PASS = @DB_RT_PASS@ - -# }}} - - -#################################################################### - -all: default - -default: - @echo "Please read RT's readme before installing. Not doing so could" - @echo "be dangerous." - - - -instruct: - @echo "Congratulations. RT has been installed. " - @echo "" - @echo "" - @echo "You must now configure RT by editing $(SITE_CONFIG_FILE)." - @echo "" - @echo "(You will definitely need to set RT's database password in " - @echo "$(SITE_CONFIG_FILE) before continuing. Not doing so could be " - @echo "very dangerous. Note that you do not have to manually add a " - @echo "database user or set up a database for RT. These actions will be " - @echo "taken care of in the next step.)" - @echo "" - @echo "After that, you need to initialize RT's database by running" - @echo " 'make initialize-database'" - -# @echo " or by executing " -# @echo " '$(RT_SBIN_PATH)/rt-setup-database --action init \ " -# @echo " --dba $(DB_DBA) --prompt-for-dba-password'" - - - -upgrade-instruct: - @echo "Congratulations. RT has been upgraded. You should now check-over" - @echo "$(CONFIG_FILE) for any necessary site customization. Additionally," - @echo "you should update RT's system database objects by running " - @echo " ls etc/upgrade" - @echo "" - @echo "For each item in that directory whose name is greater than" - @echo "your previously installed RT version, run:" - @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action schema --datadir etc/upgrade/<version>" - @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action acl --datadir etc/upgrade/<version>" - @echo " $(RT_SBIN_PATH)/rt-setup-database --dba $(DB_DBA) --prompt-for-dba-password --action insert --datadir etc/upgrade/<version>" - - -upgrade: config-install dirs files-install fixperms upgrade-instruct - -upgrade-noclobber: config-install libs-install html-install bin-install local-install doc-install fixperms - - -# {{{ dependencies -testdeps: - $(PERL) ./sbin/rt-test-dependencies --verbose --with-$(DB_TYPE) - -depends: fixdeps - -fixdeps: - $(PERL) ./sbin/rt-test-dependencies --verbose --install --with-$(DB_TYPE) - -#}}} - -# {{{ fixperms -fixperms: - # Make the libraries readable - chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_PATH) - chown -R $(LIBS_OWNER) $(DESTDIR)/$(RT_LIB_PATH) - chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(RT_LIB_PATH) - chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(RT_LIB_PATH) - - - chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH) - chmod $(RT_READABLE_DIR_MODE) $(DESTDIR)/$(RT_BIN_PATH) - - chmod 0755 $(DESTDIR)/$(RT_ETC_PATH) - chmod 0500 $(DESTDIR)/$(RT_ETC_PATH)/* - - #TODO: the config file should probably be able to have its - # owner set separately from the binaries. - chown -R $(BIN_OWNER) $(DESTDIR)/$(RT_ETC_PATH) - chgrp -R $(RTGROUP) $(DESTDIR)/$(RT_ETC_PATH) - - chmod 0550 $(DESTDIR)/$(CONFIG_FILE) - chmod 0550 $(DESTDIR)/$(SITE_CONFIG_FILE) - - # Make the interfaces executable - chown $(BIN_OWNER) $(BINARIES) - chgrp $(RTGROUP) $(BINARIES) - chmod 0755 $(BINARIES) - - # Make the web ui readable by all. - chmod -R u+rwX,go-w,go+rX $(DESTDIR)/$(MASON_HTML_PATH) \ - $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) \ - $(DESTDIR)/$(LOCAL_LEXICON_PATH) - chown -R $(LIBS_OWNER) $(DESTDIR)/$(MASON_HTML_PATH) \ - $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) - chgrp -R $(LIBS_GROUP) $(DESTDIR)/$(MASON_HTML_PATH) \ - $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) - - # Make the web ui's data dir writable - chmod 0770 $(DESTDIR)/$(MASON_DATA_PATH) \ - $(DESTDIR)/$(MASON_SESSION_PATH) - chown -R $(WEB_USER) $(DESTDIR)/$(MASON_DATA_PATH) \ - $(DESTDIR)/$(MASON_SESSION_PATH) - chgrp -R $(WEB_GROUP) $(DESTDIR)/$(MASON_DATA_PATH) \ - $(DESTDIR)/$(MASON_SESSION_PATH) -# }}} - -# {{{ dirs -dirs: - mkdir -p $(DESTDIR)/$(RT_LOG_PATH) - mkdir -p $(DESTDIR)/$(MASON_DATA_PATH) - mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/cache - mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/etc - mkdir -p $(DESTDIR)/$(MASON_DATA_PATH)/obj - mkdir -p $(DESTDIR)/$(MASON_SESSION_PATH) - mkdir -p $(DESTDIR)/$(MASON_HTML_PATH) - mkdir -p $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) - mkdir -p $(DESTDIR)/$(LOCAL_ETC_PATH) - mkdir -p $(DESTDIR)/$(LOCAL_LIB_PATH) - mkdir -p $(DESTDIR)/$(LOCAL_LEXICON_PATH) -# }}} - -install: config-install dirs files-install fixperms instruct - -files-install: libs-install etc-install bin-install sbin-install html-install local-install doc-install - -config-install: - mkdir -p $(DESTDIR)/$(CONFIG_FILE_PATH) - -cp etc/RT_Config.pm $(DESTDIR)/$(CONFIG_FILE) - [ -f $(DESTDIR)/$(SITE_CONFIG_FILE) ] || cp etc/RT_SiteConfig.pm $(DESTDIR)/$(SITE_CONFIG_FILE) - - chgrp $(RTGROUP) $(DESTDIR)/$(CONFIG_FILE) - chown $(BIN_OWNER) $(DESTDIR)/$(CONFIG_FILE) - - chgrp $(RTGROUP) $(DESTDIR)/$(SITE_CONFIG_FILE) - chown $(BIN_OWNER) $(DESTDIR)/$(SITE_CONFIG_FILE) - - @echo "Installed configuration. about to install rt in $(RT_PATH)" - -test: - $(PERL) -Ilib lib/t/00smoke.t - -regression-install: config-install - $(PERL) -pi -e 's/Set\(\$$DatabaseName.*\);/Set\(\$$DatabaseName, "rt3regression"\);/' $(DESTDIR)/$(CONFIG_FILE) - -regression: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms apachectl run-regression - -run-regression: - prove -Ilib lib/t/setup_regression.t lib/t/autogen/ lib/t/regression/ - - -regression-noapache: regression-install dirs files-install libs-install sbin-install bin-install regression-instruct regression-reset-db testify-pods fixperms start-httpd run-regression - -regression-quiet: - $(PERL) sbin/regression_harness - -regression-instruct: - @echo "About to wipe your database for a regression test. ABORT NOW with Control-C" - - -# {{{ database-installation - -regression-reset-db: - $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --dba-password '' --force - $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --dba-password '' - -initdb :: initialize-database - -initialize-database: - $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action init --dba $(DB_DBA) --prompt-for-dba-password - -dropdb: - $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/rt-setup-database --action drop --dba $(DB_DBA) --prompt-for-dba-password - -insert-approval-data: - $(PERL) $(DESTDIR)/$(RT_SBIN_PATH)/insert_approval_scrips -# }}} - -# {{{ libs-install -libs-install: - [ -d $(DESTDIR)/$(RT_LIB_PATH) ] || mkdir -p $(DESTDIR)/$(RT_LIB_PATH) - -cp -rp lib/* $(DESTDIR)/$(RT_LIB_PATH) -# }}} - -# {{{ html-install -html-install: - [ -d $(DESTDIR)/$(MASON_HTML_PATH) ] || mkdir -p $(DESTDIR)/$(MASON_HTML_PATH) - -cp -rp ./html/* $(DESTDIR)/$(MASON_HTML_PATH) -# }}} - -# {{{ doc-install -doc-install: - # RT 3.0.0 - RT 3.0.2 would accidentally create a file instead of a dir - -[ -f $(DESTDIR)/$(RT_DOC_PATH) ] && rm $(DESTDIR)/$(RT_DOC_PATH) - [ -d $(DESTDIR)/$(RT_DOC_PATH) ] || mkdir -p $(DESTDIR)/$(RT_DOC_PATH) - -cp -rp ./README $(DESTDIR)/$(RT_DOC_PATH) -# }}} - -# {{{ etc-install - -etc-install: - mkdir -p $(DESTDIR)/$(RT_ETC_PATH) - -cp -rp \ - etc/acl.* \ - etc/initialdata \ - etc/schema.* \ - $(DESTDIR)/$(RT_ETC_PATH) -# }}} - -# {{{ sbin-install - -sbin-install: - mkdir -p $(DESTDIR)/$(RT_SBIN_PATH) - chmod +x \ - sbin/rt-dump-database \ - sbin/rt-setup-database \ - sbin/rt-test-dependencies - -cp -rp \ - sbin/rt-dump-database \ - sbin/rt-setup-database \ - sbin/rt-test-dependencies \ - $(DESTDIR)/$(RT_SBIN_PATH) - -# }}} - -# {{{ bin-install - -bin-install: - mkdir -p $(DESTDIR)/$(RT_BIN_PATH) - chmod +x bin/rt-mailgate \ - bin/rt-crontool - -cp -rp \ - bin/rt-mailgate \ - bin/mason_handler.fcgi \ - bin/mason_handler.scgi \ - bin/standalone_httpd \ - bin/mason_handler.svc \ - bin/rt \ - bin/webmux.pl \ - bin/rt-crontool \ - $(DESTDIR)/$(RT_BIN_PATH) -# }}} - -# {{{ local-install -local-install: - -cp -rp ./local/html/* $(DESTDIR)/$(MASON_LOCAL_HTML_PATH) - -cp -rp ./local/po/* $(DESTDIR)/$(LOCAL_LEXICON_PATH) - -cp -rp ./local/etc/* $(DESTDIR)/$(LOCAL_ETC_PATH) -# }}} - -# {{{ Best Practical Build targets -- no user servicable parts inside - - -POD2TEST_EXE = sbin/extract_pod_tests - -testify-pods: - [ -d lib/t/autogen ] || mkdir lib/t/autogen - find lib -name \*pm |grep -v .svn | grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE) - find bin -type f |grep -v .svn | grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE) - find lib -name \*pm |grep -v .svn | grep -v \*.in |xargs -n 1 $(PERL) $(POD2TEST_EXE) - find bin -type f |grep -v .svn | grep -v \~ | grep -v "\.in" | xargs -n 1 $(PERL) $(POD2TEST_EXE) - - - -regenerate-catalogs: - $(PERL) sbin/extract-message-catalog - -license-tag: - $(PERL) sbin/license_tag - -factory: initialize-database - cd lib; $(PERL) ../sbin/factory $(DB_DATABASE) RT - -reconfigure: - aclocal -I m4 - autoconf - chmod 755 ./configure - ./configure - -start-httpd: - $(PERL) bin/standalone_httpd 80 & - -apachectl: - $(APACHECTL) stop - sleep 10 - $(APACHECTL) start - sleep 5 -# }}} |